Human pharmaceuticals, antioxidants, and plasticizers in wastewater treatment plant and water reclamation plant effluents.

The primary objective of this study was to determine the presence of unregulated organic chemicals in reclaimed water using complementary targeted and broad spectrum approaches. Eleven of 12 targeted human pharmaceuticals, antioxidants, and plasticizers, and 27 tentatively identified non-target organic chemicals, were present in secondary effluent entering tertiary treatment trains at a wastewater treatment plant and two water reclamation facilities. The removal of these compounds by three different tertiary treatment trains was investigated: coagulant-assisted granular media filtration (California Title-22 water, 22 CCR 60301-60357; Barclay [2006]), lime clarification/reverse osmosis (lime/ RO), and microfiltration-reverse osmosis (MF/RO). Carbamazepine, clofibric acid, gemfibrozil, ibuprofen, p-toluenesulfonamide, caffeine, butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), and N-butyl benzenesulfonamide (N-BBSA) were present at low to high nanogram-per-liter levels in Title 22 water. The lime/RO product waters contained lower concentrations of clofibric acid, ibuprofen, caffeine, BHA, and N-BBSA (<10 to 71 ng/L) than their Title 22 counterparts. The MF/RO treatment reduced concentrations to levels below their detection limits, although BHT was present in MF/RO product water from one facility. The presence of the target analytes in two surface waters used as raw drinking water sources and a recharged groundwater was also examined. Surface waters used as raw drinking water sources contained caffeine, BHA, BHT, and N-BBSA, while recharged groundwater contained BHT, BHA, and N-BBSA. Nontarget compounds in recharged groundwater appeared to be attenuated with increased residence time in the aquifer.     

Behaviour and biodegradation of sulfonamides (p-TSA, o-TSA, BSA) during drinking water treatment

Three sulfonamides -para-toluenesulfonamide (p-TSA), ortho-toluenesulfonamide (o-TSA) and benzenesulfonamide (BSA) - have recently been detected in groundwater within a catchment area of one drinking water treatment plant (DWTP), which is located downstream of a former sewage farm. The degradation pathways of p-TSA, o-TSA and BSA were investigated during drinking water treatment with incubation experiments and an experimental filter. Incubation experiments showed that p-TSA is removed during the treatment by microbiological processes. Removal of p-TSA is performed by adapted microorganisms only present in polluted groundwater. The elimination in an experimental filter of 1.6m length applying filtration velocities from 2 to 6 m h(-1) was approximately 93% of p-TSA. The microbial degradation rates in the incubation experiment were approximately 0.029 microg l(-1) h(-1) (zero order reaction). In the experimental filter, the reaction rate constants were around 0.0063 s(-1) for all filtration velocities (1st order reaction). Drinking water treatment does not reduce the concentration of o-TSA and BSA under conditions encountered in Berlin. p-TSA, o-TSA and BSA were only measured in the low microg l(-1) concentrations range in the purified water.     

Quantification of bisphenol A, 353-nonylphenol and their chlorinated derivatives in drinking water treatment plants

Bisphenol A (BPA) and nonylphenols (NP) are of major concern to public health due to their high potential for human exposure and to their demonstrated toxicity (endocrine disruptor effect). A limited number of studies have shown that BPA and NP are present in drinking water. The chlorinated derivatives that may be formed during the chlorination step in drinking water treatment plants (DWTP) exhibit a higher level of estrogenic activity than their parent compounds. The aim of this study was to investigate BPA, 353NP, and their chlorinated derivative concentrations using an accurate and reproducible method of quantification. This method was applied to both surface and treated water samples from eight French DWTPs producing from surface water. Solid-phase extraction followed by liquid chromatography?Ctandem mass spectrometry was developed in order to quantify target compounds from water samples. The limits of detection ranged from 0.3 to 2.3?ng/L for BPA and chlorinated BPA and from 1.4 to 63.0?ng/L for 353NP and chlorinated 353NP. BPA and 353NP were found in most analyzed water samples, at a level ranging from 2.0 to 29.7?ng/L and from 0 to 124.9?ng/L, respectively. In most of DWTPs a decrease of BPA and 353NP was observed between surface water and treated water (36.6 to 78.9?% and 2.2 to 100.0?% for BPA and 353NP, respectively). Neither chlorinated BPA nor chlorinated 353NP was detected. Even though BPA and 353NP have been largely removed in the DWTPs studied, they have not been completely eliminated, and drinking water may consequently remain a source of human exposure.     

Ballast water treatment systems: design,regulations, and selection under the choice varying priorities

This paper investigates the role of ballast water treatment systems (BWTSs) and proposes a selection procedure for conventional merchant ships based on the financial, legal, and operational circumstances. Through the metallurgical revolution of the nineteenth century, commercial ships are converted to steel hull from wooden structures. By this innovative shift, use of ballast water became an essential part of ships for improving propulsion and stability while reducing stress on hull (instead of rocks). However, the content of ballast water is emerged since it relocates marine species from an ecological composition (usually cargo discharging port) to another one (loading port). Uncontrolled relocation of marine species may cause severe damage to existing ecological basis on ballast discharging area. BWTSs are developed for ships to eliminate marine species (i.e., aquatic invasive species) content by using a filtering device. It ensures an eco-friendly ballasting and de-ballasting process. The selection of proper BWTS is another debate since the BWTSs are designed with cost-quality and cost (eco)-performance variations. The proposed approach denoted that both tonnage and the age of ship are indicative factors on selection. The cost of installation varies based on installation space and active vs. project vessel cases.     

Trace analysis of parabens preservatives in drinking water treatment sludge,treated, and mineral water samples

Parabens have been widely used as antimicrobial agents, mainly in food products, pharmaceuticals, and cosmetics. Although they are known as safe preservatives, they also cause some harm to human health, which has been discussed lately. Therefore, the aim of this study was to evaluate the occurrence of nine parabens (including isomers) in mineral and drinking waters, besides in drinking water treatment sludge (DWTS) samples with determination by liquid chromatography tandem mass spectrometry (LC-MS/MS). Both methods solid phase extraction (SPE) and QuEChERS were validated. Calibration curves showed a correlation coefficient of 0.99 for all compounds. LOQ values ranged from 0.04 to 4 μg L^?1 in aqueous matrices and from 5 to 500 ng g^?1 in DWTS. Recoveries between 70 and 115% were reached with RSD below 20% for all compounds in SPE whereas recoveries between 62 and 119% were found with RSD below 20% for almost all compounds in QuEChERS. Matrix effect had low values (<?20%); it was only above 20% for methylparaben in the SPE and for pentylparaben in the QuEChERS. Using a quick and simple extraction procedures with SPE, QuEChERS, and LC-MS/MS analyses, these methods proved to be selective and sensitive. They were successfully applied to real samples (treated water, mineral water, and sludge), and methylparaben was detected at concentration levels below 0.242 μg L^?1 in mineral and treated water samples and 10 ng g^?1 in DWTS samples.     

A review on occurrence,characteristics, toxicology and treatment of nanoplastic waste in the environment

Environmental Science and Pollution Research - Nanoplastics (NPs) have showed hotspot of discussion in recent years due to their impact in environment as a futuristic major pollutant in water, soil...     

炼油废水处理设施的工艺改进

针对炼油废水处理设施运行过程中存在的问题 ,采取了相应的改进措施 :在气浮池中 ,取消多孔集水管 ,增设导水集泥斜板 ,将隔墙斜置 ,改顺水流刮渣为逆水流刮渣 ;在曝气沉淀池中 ,改池底中央进水为沿回流缝多点进水 ,改周边集水槽出水为径向集水槽出水 ;将活性炭回转再生炉改造为立式移动床。运行表明 ,改造取得了满意的效果。并从设计、运行控制参数的改进以及流体力学的基础理论等方面进行了论述     

Electrochemical treatment of penicillin,cephalosporin, and fluoroquinolone antibiotics via active chlorine: evaluation of antimicrobial activity,toxicity, matrix,and their correlation with the degradation pathways

Environmental Science and Pollution Research - Antibiotics are pharmaceuticals widely consumed and frequently detected in environmental water, where they can induce toxic effects and development of...     

强化混凝工艺深度处理给水厂排泥废水

水厂废水的综合处理与回用是我国供水行业的新趋势和节水目标所在,采用强化混凝技术进行水厂排泥废水的深度处理。通过混凝剂筛选实验和有机物表征确定最佳混凝剂为高效聚合铝(HPAC),适宜投加量为650 mg/L。当混凝剂HPAC投加量为650 mg/L时,对COD、TOC、浊度和色度的去除率分别为82.5%、89.8%、95%和92.5%,相应的出水值分别为58 mg/L、8.46 mg/L、2.35 NTU、13度,COD满足《污水综合排放标准》(GB 8978-1996)的要求(COD≤100 mg/L),同时实验结果显示聚合氯化铝(PAC)、HPAC、三氯化铁(FeCl3)主要去除分子量处于>1 300 Da范围的有机物,对分子量处于744～1 300 Da之间的有机物去除有限。     

Determination of sterols, estrogens and inorganic ions in waste water and size-segregated aerosol particles emitted from waste water treatment

Concentrations of steroids and inorganic ions were measured in waste water of an aerated sand trap as well as in aerosol particles emitted from this tank at the waste water treatment plant (WWTP) of Bayreuth, Germany, in January and February 2003. The investigations comprised seven sterols, two estrogens, and several inorganic ions. Since an appropriate method for the determination of sterols in waste water was not available, a new method based on solid phase extraction was developed. The concentrations of the sterols coprostanol and cholesterol amounted to 30-180 microg l(-1) in waste water and to 400-5000 pg m(-3) in aerosol particles. All other sterols were present in markedly lower concentrations. The mean concentrations of the two estrogens estrone and 17beta-estradiol were about 165 pg m(-3) in aerosol particles. The steroid concentrations in both waste water and aerosol particles varied greatly over time, however with the exception of coprostanol, no clear correlation was detected between concentrations in waste water and aerosol particles.     

A review on bisphenol A occurrences,health effects and treatment process via membrane technology for drinking water

Massive utilization of bisphenol A (BPA) in the industrial production of polycarbonate plastics has led to the occurrence of this compound (at μg/L to ng/L level) in the water treatment plant. Nowadays, the presence of BPA in drinking water sources is a major concern among society because BPA is one of the endocrine disruption compounds (EDCs) that can cause hazard to human health even at extremely low concentration level. Parallel to these issues, membrane technology has emerged as the most feasible treatment process to eliminate this recalcitrant contaminant via physical separation mechanism. This paper reviews the occurrences and effects of BPA toward living organisms as well as the application of membrane technology for their removal in water treatment plant. The potential applications of using polymeric membranes for BPA removal are also discussed. Literature revealed that modifying membrane surface using blending approach is the simple yet effective method to improve membrane properties with respect to BPA removal without compromising water permeability. The regeneration process helps in maintaining the performances of membrane at desired level. The application of large-scale membrane process in treatment plant shows the feasibility of the technology for removing BPA and possible future prospect in water treatment process.     

Evaluation of the effectiveness of phosphate treatment for the remediation of mine waste soils contaminated with Cd, Cu, Pb, and Zn

The effectiveness of phosphate treatment for Cd, Cu, Pb, and Zn immobilization in mine waste soils was examined using batch conditions. Application of synthetic hydroxyapatite (HA) and natural phosphate rock (FAP) effectively reduced the heavy metal water solubility generally by about 84-99%. The results showed that HA was slightly superior to FAP for immobilizing heavy metals. The possible mechanisms for heavy metal immobilization in the soil involve both surface complexation of the metal ions on the phosphate grains and partial dissolution of the phosphate amendments and precipitation of heavy metal-containing phosphates. HA and FAP could significantly reduce Cd, Cu, Pb, and Zn availability in terms of water solubility in contaminated soils while minimizing soil acidification and potential risk of eutrophication associated with the application of highly soluble phosphate sources.     

Occurrence and abundance of tetracycline,sulfonamide resistance genes,and class 1 integron in five wastewater treatment plants

To understand the transport and fate of antibiotic resistance genes in wastewater treatment plants, 12 resistance genes (ten tetracycline resistance genes, two sulfonamides genes) and class 1 integron gene (intI1) were studied in five wastewater treatment plants with different treatment processes and different sewage sources. Among these resistance genes, sulfonamides genes (sul1 and sul2) were of the most prevalent genes with detection frequency of 100 %. The effluent water contained fewer types of resistance genes than the influent in most selected plants. The abundance of five quantified resistance genes (tetG, tetW, tetX, sul1, and intI1) decreased in effluent of plants treating domestic or industrial wastewater with anaerobic/aerobic or membrane bioreactor (MBR) technologies, but tetG, tetX, sul1, and intI1 increased along the treatment units of plants treating vitamin C production wastewater by anaerobic/aerobic technology. In plant treating cephalosporins production wastewater by UASB/aerobic process, the quantities of tetG, tetX, and sul1 first decreased in anaerobic effluent water but then increased in aerobic effluent water.     

Influence of seasonal climate differences on the pharmaceutical,hormone and personal care product removal efficiency of a drinking water treatment plant

The potential presence of pharmaceuticals, hormones and personal care products in drinking water supplies has raised concerned over the efficiency with which these substances are removed by water treatment processes. In this work, we analyzed samples of raw, unprocessed water collected in different periods and found them to contain higher levels of these contaminants in the colder periods (viz. 12–314 ng L⁻¹ in autumn and winter as compared to 8–127 ng L⁻¹ in spring and summer) as a result of their biodegradation being favoured by high temperatures and solar irradiance. We also assessed the efficiency with which these contaminants are removed from drinking water by a water treatment plant operating in south-eastern Spain. Preoxidation with potassium permanganate and chloramination with sodium hypochlorite in the presence of highly concentrated ammonia were found to be the treatment steps most markedly contributing to the removal of pharmaceuticals, hormones and personal care products from drinking water (especially in the warmer periods, where these contaminants were completely removed from the water). By contrast, water treated in the colder periods (autumn and winter) still contained small amounts of ibuprofen and carbamazepine (0.09–0.5 ng L⁻¹) which, however, accounted for less than 0.2% of their original concentrations in the water prior to treatment.     

Photolytic treatment of atrazine-contaminated water: products, kinetics, and reactor design.

This study investigates the products, kinetics, and reactor design of atrazine photolysis under 254-nm ultraviolet-C (UVC) irradiation. With an initial atrazine concentration of 60 microg/L (60 ppbm), only two products remain in detectable levels. Up to 77% of decomposed atrazine becomes hydroxyatrazine, the major product. Both atrazine and hydroxyatrazine photodecompose following the first-order rate equation, but the hydroxyatrazine photodecomposition rate is significantly slower than that of atrazine. For atrazine photodecomposition, the rate constant is proportional to the square of UVC output, but inversely proportional to the reactor volume. For a photochemical reactor design, a series of equations are proposed to calculate the needed UVC output power, water treatment capacity, and atrazine outlet concentration.     

Effects of light, microbial activity, and sediment resuspension on the phosphorus immobilization capability of drinking water treatment residuals in lake sediment

Drinking water treatment residuals (WTRs), nonhazardous by-products generated in a drinking water treatment plant, can be reused to immobilize phosphorus (P) to control the internal P loading from lake sediments for eutrophication control. Reasonably, before practical application, it is essential to determine the P immobilization capability of WTRs in lake sediments under various conditions. In this work, laboratory scale experiments were conducted to investigate the effects of light, microbial activity, and sediment resuspension on the P immobilization capability of WTRs. The results suggested that absence of light, low microbial activity, and sediment resuspension can increase the internal P loading from lake sediments. WTRs can, however, reduce the internal P loading significantly. Further analysis demonstrated that WTRs can stabilize P, decreasing the P bioavailability in the sediments under varied conditions. WTRs also presented little undesirable effects on the dissolved oxygen levels and pH of overlying water. Therefore, light, microbial activity, and sediment resuspension have little effect on the P immobilization capability of WTRs in lake sediments.     

Occurrence,distribution, and multi-phase partitioning of triclocarban and triclosan in an urban river receiving wastewater treatment plants effluent in China

Occurrence, distribution, spatial and seasonal variations, and partitioning between aqueous phase and suspended particulate matters (SPM) of triclocarban (TCC) and triclosan (TCS) in Xiaoqing River, which receives wastewater treatment plant (WWTP) effluents, were studied. The distribution of the total TCC and TCS levels in surface water and sediments along the river were discussed. The highest TCC and TCS concentrations were both found near the discharge port of WWTPs, and the TCC and TCS levels decreased downstream of the WWTPs as a result of their distances from the source of WWTP discharges. The mean values of TCC and TCS in low-flow season were 1.62 and 1.80 times, respectively, as much as in high-flow season in surface water. The study on partitioning of TCC and TCS between aqueous phase and SPM shown the mean level of dissolved TCC accounted for about 10 % of the total level in surface water, whereas the TCS level was about 30 %. The TCC concentrations detected in the surface sediment samples (0 to 5 cm) ranged from 226 to 1,956 ng/g, with a mean value of 733 ng/g. The TCS levels were between 85 and 705 ng/g, with a mean value of 255 ng/g. The distribution and variations of TCC and TCS in sediments along the river were highly consistent with those in the water phase. The TCC and TCS levels in deep sediments (5 to 10 cm) were significantly lower than those in surface sediments. The mean TCC level in surface sediments was about 2.4 times as much as in deep sediments, and the TCS level in surface sediments was 3.1 times as much as in deep sediments.     

Mining, the environment and the treatment of mine effluents

The environmental impact of mining on the ecosystem, including land, water and air, has become an unavoidable reality. Guidelines and regulations have been promulgated to protect the environment throughout mining activities from start-up to site decommissioning, in particular, the occurrence of acid mine drainage (AMD), due to oxidation of sulfide mineral wastes, has become the major area of concern to many mining industries during operations and after site decommissioning. AMD is characterised by high acidity and a high concentration of sulfates and dissolved metals. If it cannot be prevented or controlled, it must be treated to eliminate acidity, and reduce heavy metals and suspended solids before release to the environment. This paper discusses conventional and new methods used for the treatment of mine effluents, in particular the treatment of AMD.     

Profiles and risk assessment of phthalate acid esters (PAEs) in drinking water sources and treatment plants,East China

This study is the first report describing the occurrence of 15 phthalate acid esters (PAEs) in the three typical water sources of YiXing City, Taihu Upper-River Basin, East China. The fate of target PAEs in the Jiubin drinking water treatment plant (JTP) was also analyzed. The amounts of Σ₁₅PAE in the Hengshan (HS), Youche (YC), and Xijiu (XJ) water sources were relatively moderate, with mean values of 360, 357, and 697 ng L⁻¹, respectively. Bis(2-ethylhexyl) phthalate (DEHP) dominated the PAE concentration, making up 80% of the 15 total PAEs. The highest levels of Σ₁₅PAE were found in HS, YC, and XJ in March 2015, January 2015, and July 2014, respectively. The occurrence and concentrations of these compounds were spatially dependent, and the mean concentrations of Σ₁₅PAE in HS, YC, and XJ samples increased from the surface layer to the bottom layer with varied percentage increases. The removal efficiency of the PAEs in the finished water varied markedly, and the removal of PAEs by the JTP ranged from 12.8 to 64.5%. The potential ecosystem risk assessment indicated that the risk of PAEs was relatively low in these three water sources. However, risks posed by PAEs due to drinking water still exist; therefore, special attention should be paid to source control in the JTP, and advanced treatment processes for drinking water supplies should be implemented.

     

The influence of palm oil fuel ash heat treatment on the strength activity,porosity, and water absorption of cement mortar

Environmental Science and Pollution Research - The current study aims to explore the impact of palm oil fuel ash (POFA) heat treatment on the strength activity, porosity, and water absorption of...