Methods for land use impact assessment: A review

Many types of methods to assess land use impact have been developed. Nevertheless a systematic synthesis of all these approaches is necessary to highlight the most commonly used and most effective methods. Given the growing interest in this area of research, a review of the different methods of assessing land use impact (LUI) was performed using bibliometric analysis. One hundred eighty seven articles of agricultural and biological science, and environmental sciences were examined. According to our results, the most frequently used land use assessment methods are Life-Cycle Assessment, Material Flow Analysis/Input–Output Analysis, Environmental Impact Assessment and Ecological Footprint. Comparison of the methods allowed their specific features to be identified and to arrive at the conclusion that a combination of several methods is the best basis for a comprehensive analysis of land use impact assessment.     

Testing an ex-ante framework for the evaluation of impact assessment laws: Lessons from Canada and Brazil

Scholars have been increasingly investigating legislative changes in Environmental Impact Assessment (EIA). However, most of the existing evaluation frameworks have been applied to ex-post scenarios, after EIA laws and respective policies and regulations had been implemented for some time. This article has a twofold objective: first, to propose an ex-ante framework for the evaluation of proposed EIA laws and, second, to test the application of the framework to bills C-69 and PL-3729, which target federal-level EIA reform in Canada and Brazil, respectively. The proposed framework is meant to indicate the extent to which proposed legislative changes meet 50 good practice criteria, thus providing a more balanced and transparent account of the issues that should be addressed effectively in the legislative process and in future regulations and guidelines. Results indicate very contrasting scope and potential effects of proposed legislative changes in the two countries. Brazil's bill is essentially intended to integrate existing regulations into a law that would make EIA faster, simpler and less frequent. Canada's bill, recently approved by Parliament, includes a new Impact Assessment Act that is expected to deliver more comprehensive and credible assessments. The ex-ante framework, by exposing how close or distant proposed EIA regimes are from good practices, can be particularly helpful in lawmaking and regulatory design. The article finally discusses limitations and highlights future avenues of research.     

A method to the impact assessment of the returning grazing land to grassland project on regional eco-environmental vulnerability

The Chinese government has conducted the Returning Grazing Land to Grassland Project (RGLGP) across large portions of grasslands from western China since 2003. In order to explore and understand the impact in the grassland's eco-environment during the RGLGP, we utilized Projection Pursuit Model (PPM) and Geographic Information System (GIS) to develop a spatial assessment model to examine the ecological vulnerability of the grassland. Our results include five indications: (1) it is practical to apply the spatial PPM on ecological vulnerability assessment for the grassland. This methodology avoids creating an artificial hypothesis, thereby providing objective results that successfully execute a multi-index assessment process and analysis under non-linear systems in eco-environments; (2) the spatial PPM is not only capable of evaluating regional eco-environmental vulnerability in a quantitative way, but also can quantitatively demonstrate the degree of effect in each evaluation index for regional eco-environmental vulnerability; (3) the eco-environment of the Xianshui River Basin falls into the medium range level. The normalized difference vegetation index (NDVI) and land use cover and change (LUCC) crucially influence the Xianshui River Basin's eco-environmental vulnerability. Generally, in the Xianshui River Basin, regional eco-environmental conditions improved during 2000 and 2010. The RGLGP positively affected NDVI and LUCC structure, thereby promoting the enhancement of the regional eco-environment; (4) the Xianshui River Basin divides its ecological vulnerability across different levels; therefore our study investigates three ecological regions and proposes specific suggestions for each in order to assist in eco-environmental protection and rehabilitation; and lastly that (5) the spatial PPM established by this study has the potential to be applied on all types of grassland eco-environmental vulnerability assessments under the RGLGP and under the similar conditions in the Returning Agriculture Land to Forest Project (RALFP). However, when establishing an eco-environmental vulnerability assessment model, it is necessary to choose suitable evaluation indexes in accordance with regional eco-environmental characteristics.     

Determining the global significance of local and regional mitigation strategies: Setting the scene with global integrated assessment models

Because of the importance and complexity of the processes involved in the response of land cover and land use to changing environmental conditions, other approaches are required to evaluate the effectiveness of mitigation options. One such approach is provided by the global integrated assessment model, IMAGE 2. This article presents the structure and some of the underlying assumptions of IMAGE 2, which illustrates the importance of feedback processes in evaluating the effectiveness of mitigation options with respect to land use. Although models such as IMAGE 2 are unsuitable for local and national mitigation evaluations, they can be used to define the regional and global constraints of the smaller scale assessments.     

Combination of life cycle assessment,risk assessment and human biomonitoring to improve regulatory decisions and policy making for chemicals

Prior to market entry, new chemical substances are assessed for their risk to human health and the environment. Conventional risk assessment (RA) is limited in scope, i.e. it usually does not cover the entire life cycle of a substance, nor does it take into account sustainability aspects such as the amount of raw materials and energy required to produce the substance. Life cycle assessment (LCA) can provide this pivotal information to support an informed decision on the sustainability of a new substance. Unfortunately, LCA has had little regulatory application up to now. We believe that increasing the focus on combined use of LCA and life cycle-based RA could lead to improved regulatory long-term decisions for marketed chemicals. Inclusion of human biomonitoring could increase the robustness of such decisions even further. In addition, the combined use of the three methods allows a robust search for sustainable alternatives of currently marketed chemicals that have an unfavourable risk profile.     

Monte Carlo assessment of uncertainty in the simulated hydrological response to land use change

We quantified the uncertainty in hydrological response for a set of land use change scenarios by varying plant parameters within realistic uncertainty bounds in a Monte Carlo analysis. The results show that simulated hydrological fluxes significantly change after the introduction of outwintering suckler cow management, despite the presence of a significant amount of output uncertainty due to uncertainty in the plant parameterisation. The key to a proper uncertainty assessment was to consider the uncertainty in the difference between the scenarios instead of the absolute uncertainty of each single scenario. Additionally, a sensitivity analysis showed that changing soil properties in response to land use change does not result in significantly different results in the scenario analysis.     

Integrated assessment of potential health impact of global environmental change: Prospects and limitations

Estimating the future health impact of global environmental change requires scientific methods that extend beyond conventional health risk assessment in relation to existing exposures. The dynamic and non‐linear nature of these changes in large complex biophysical systems, the interactions between them, and the reference to future scenarios all contribute uncertainty. Potential health impacts can be estimated from historical analogues, by mathematical modelling, or by reasonable foresight (especially in relation to social and economic disruptions). Integrated assessment methods draw upon all these techniques. In particular, integrated mathematical modelling techniques are evolving, as scientists (and policy‐makers) come to terms with this complex scenario‐based impact assessment task.     

Monitoring conservation effectiveness in a global biodiversity hotspot: the contribution of land cover change assessment

Tropical forests, which play critical roles in global biogeochemical cycles, radiation budgets and biodiversity, have undergone rapid changes in land cover in the last few decades. This study examines the complex process of land cover change in the biodiversity hotspot of Western Ghats, India, specifically investigating the effects of conservation measures within the Indira Gandhi Wildlife Sanctuary. Current vegetation patterns were mapped using an IRS P6 LISS III image and this was used together with Landsat MSS data from 1973 to map land cover transitions. Two major and divergent trends were observed. A dominant degradational trend can be attributed to agricultural expansion and infrastructure development while a successional trend, resulting from protection of the area, showed the resilience of the system after prolonged disturbances. The sanctuary appears susceptible to continuing disturbances under the current management regime but at lower rates than in surrounding unprotected areas. The study demonstrates that remotely sensed land cover assessments can have important contributions to monitoring land management strategies, understanding processes underpinning land use changes and helping to inform future conservation strategies.     

TiO2 nanoparticles influence on the environmental performance of natural and recycled mortars: A life cycle assessment

The World Meteorological Organization has recently reported that greenhouse gases have reached their highest level since 3–5 million years ago. A continuing rise would cause serious consequences e.g., rising temperatures, death of living beings, or water pollution. Cement is associated with those levels since its production encompasses around 8% of global CO₂ emissions. To increase the environmental performance of cementitious materials, different approaches could be followed, for instance, the reuse of waste materials such as recycled aggregate (RA) or the addition of TiO₂ nanoparticles due to its proactive effect during service life. However, no research has been found that examined the effect of nano-TiO₂ addition on recycled mortars in terms of environmental impact. Consequently, the main objective of this research is to evaluate the sustainability of TiO₂ nanoparticles in mortars made with either natural or recycled aggregate. Twelve mixtures with different percentages of nano-TiO₂ substitution (0%, 0.5%, 1%, 2% by the weight of cement) and RA replacement (0%, 50%, 100%) were studied. A life cycle assessment focused on material production (cradle-to-gate) was performed. The functional unit (FU) used was 1 m³ of mortar with a given compressive strength. The mix design was modified to meet the fixed strength defined in the FU. In terms of global warming potential, mortars with RA reduced the environmental impact when 0.5% of nano-TiO₂ was added. Considering waste generation and depletion of natural resources play a crucial role in the sustainability assessment of mortars with RA. Furthermore, when the compressive strength factor was considered in the FU, RA increased the total CO₂ emissions due to the higher amount of cement needed. Finally, despite the apparent harmful effect of nano-TiO₂ using a cradle-to-gate approach, these nanoparticles could highly enhance environmental performance due to their effects during service life.     

A program-level management system for the life cycle environmental and economic assessment of complex building projects

Climate change has become one of the most significant environmental issues, of which about 40% come from the building sector. In particular, complex building projects with various functions have increased, which should be managed from a program-level perspective. Therefore, this study aimed to develop a program-level management system for the life-cycle environmental and economic assessment of complex building projects. The developed system consists of three parts: (i) input part: database server and input data; (ii) analysis part: life cycle assessment and life cycle cost; and (iii) result part: microscopic analysis and macroscopic analysis. To analyze the applicability of the developed system, this study selected ‘U’ University, a complex building project consisting of research facility and residential facility. Through value engineering with experts, a total of 137 design alternatives were established. Based on these alternatives, the macroscopic analysis results were as follows: (i) at the program-level, the life-cycle environmental and economic cost in ‘U’ University were reduced by 6.22% and 2.11%, respectively; (ii) at the project-level, the life-cycle environmental and economic cost in research facility were reduced 6.01% and 1.87%, respectively; and those in residential facility, 12.01% and 3.83%, respective; and (iii) for the mechanical work at the work-type-level, the initial cost was increased 2.9%; but the operation and maintenance phase was reduced by 20.0%. As a result, the developed system can allow the facility managers to establish the operation and maintenance strategies for the environmental and economic aspects from a program-level perspective.     

Global warming potential of food waste through the life cycle assessment: An analytical review

Food loss and waste represent an increasing concern under social, economic and environmental perspective, either in developed or developing realities. It is estimated that more than 1.3 billion tons of food waste are generated along the whole food supply chain, from agricultural to final consumption stages, with associated environmental impacts estimated in approximately 3.3 Gigatons of CO₂ equivalent per year (6% of total anthropogenic greenhouse gases emissions). Indeed, food waste issue has been accounted among the 17 Sustainable Development Goals in terms of responsible production and consumption, with the aim of halving per capita global food waste and reduce food losses by 2030. The present paper, through a systematic, analytical and configurative review on food waste global warming potential, focuses on the role of Life Cycle Assessment and its related opportunities and challenges along upstream, core and downstream stages, considering at the same time the challenges embedded within alternative disposal technologies. Through the choice of 16 different research string and the selection of 33 papers out of more than 2000 articles between 2011 and 2021, the authors highlight the environmental impacts associated to food waste with regards to: (a) entire food baskets; (b) specific food commodities; (c) food service and households' experiences; (d) diverse disposal alternatives (e.g., anaerobic digestion, incineration, landfill), addressing future research and suitable opportunities to reach national and international sustainable goals.     

The contribution of sensor-based equipment to life cycle assessment through improvement of data collection in the industry

Within the paradigm of “Industry 4.0”, data collection and management acquire new relevance. In this context, the introduction of the Internet of Things (IoT) in the manufacturing field allows to develop information systems able to offer the possibility of using a large amount of data collected from heterogeneous sources in real time. The information thus obtained is functional not only to the attainment of an industrial development but also for evaluation and improvement of its sustainability. For example, the benefit obtainable for the life cycle assessment (LCA) methodology from the new digital configuration is represented by a greater specificity of data that wireless sensors networks (WSN) measure and transmit in a continuous way.This paper explores the benefit of using a sensor for the evaluation of the environmental impact, in particular for LCA, in an Italian company producing chemical formulations. The machinery electric consumption directly measured data is compared with the same data estimated with mathematical models. It highlights how much different approach of data measurement and calculation can affect the LCA results. The detection of the energy variable related to a single machine for a particular process, which has been described in the paper, represents a first step towards the implementation of a WSN, proposed by Scatol8 srl, to be used to produce in a more sustainable way.     

The impact of land use and season on the riverine transport of mercury into the marine coastal zone

In Mediterranean seas and coastal zones, rivers can be the main source of mercury (Hg). Catchment management therefore affects the load of Hg reaching the sea with surface runoff. The major freshwater inflows to the Baltic Sea consist of large rivers. However, their systems are complex and identification of factors affecting the outflow of Hg from its catchments is difficult. For this reason, a study into the impact of watershed land use and season on mercury biogeochemistry and transport in rivers was performed along two small rivers which may be considered typical of the southern Baltic region. Neither of these rivers are currently impacted by industrial effluents, thus allowing assessment of the influence of catchment terrain and season on Hg geochemistry. The study was performed between June 2008 and May 2009 at 13 sampling points situated at different terrain types within the catchments (forest, wetland, agriculture and urban). Hg analyses were conducted by CVAFS. Arable land erosion was found to be an important source of Hg to the aquatic system, similar to urban areas. Furthermore, inflows of untreated storm water discharge resulted in a fivefold increase of Hg concentration in the rivers. The highest Hg concentration in the urban runoff was observed with the greatest amount of precipitation during summer. Moderate rainfalls enhance the inflow of bioavailable dissolved mercury into water bodies. Despite the lack of industrial effluents entering the rivers directly, the sub-catchments with anthropogenic land use were important sources of Hg in the rivers. This was caused by elution of metal, deposited in soils over the past decades, into the rivers. The obtained results are especially important in the light of recent environmental conscience regulations, enforcing the decrease of pollution by Baltic countries.     

Analysis of spatio-temporal land cover changes for hydrological impact assessment within the Nyando River Basin of Kenya

The spatio-temporal changes in the land cover states of the Nyando Basin were investigated for auxiliary hydrological impact assessment. The predominant land cover types whose conversions could influence the hydrological response of the region were selected. Six Landsat images for 1973, 1986, and 2000 were processed to discern the changes based on a methodology that employs a hybrid of supervised and unsupervised classification schemes. The accuracy of the classifications were assessed using reference datasets processed in a GIS with the help of ground-based information obtained through participatory mapping techniques. To assess the possible hydrological effect of the detected changes during storm events, a physically based lumped approach for infiltration loss estimation was employed within five selected sub-basins. The results obtained indicated that forests in the basin declined by 20% while agricultural fields expanded by 16% during the entire period of study. Apparent from the land cover conversion matrices was that the majority of the forest decline was a consequence of agricultural expansion. The model results revealed decreased infiltration amounts by between 6% and 15%. The headwater regions with the vast deforestation were noted to be more vulnerable to the land cover change effects. Despite the haphazard land use patterns and uncertainties related to poor data quality for environmental monitoring and assessment, the study exposed the vast degradation and hence the need for sustainable land use planning for enhanced catchment management purposes.     

Towards a green and fast production system: Integrating life cycle assessment and value stream mapping for decision making

Integrating environmental commitment to manufacturing concerns seems unavoidable towards a more sustainable conduct. In the contemporary scenario, Value Stream Mapping (VSM) has been bringing new perspectives into companies' economics, improving production performance, whereas Life Cycle Assessment (LCA) has been the most complete tool for environmental assessment. Therefore, the present study aims to propose a model based on the integration of LCA and VSM to improve environmental and manufacturing aspects of organizations, the LCA-VSM model. Possible spots for integration, overlaps between LCA and VSM and potential gains were identified. The LCA-VSM model provides a simple tool for prioritizing action measures to improve the environmental-economic performance, and unlike many existing methods, it encourages continuous improvement instead of a one-off approach. The company where a case study was conducted to test the LCA-VSM model is a manufacturer of tools and painting materials for the civil construction sector. The use of the proposed model guided actions that decreased from 5% to 15% of environmental impacts (across nine impact categories), and reduced both non-value adding (lead time went from 103.26 to 24.01 days) and value adding (cycle time went from 35.7 s to 33.75 s) time. The main contribution of this paper is providing a structured approach to a practical integration of LCA and VSM towards decision making, prioritizing action measures based on the following criteria: environmental preference, economic feasibility, and ease of implementation, aiding more eco-efficient practices.     

Impact of model parameterization on predictive uncertainty of regional groundwater models in the context of environmental impact assessment

Parameterization strategy impacts models' outputs and the associated uncertainty. This is particularly true for transient regional groundwater models where parameters can only be weakly constrained by insufficient observations. However, this is rarely investigated under any particular model structure. This study bridges this gap using a regional groundwater model developed to understand the impact of coal seam gas extraction on groundwater systems in a probabilistic framework. Two different parameterization schemes were implemented for hydraulic conductivity and specific storage. The first method solely relies on the relationship between hydraulic properties and burial depths. The second more complex strategy allows more spatial variations of hydraulic parameters using pilot points. The study provides new insights and practical guidance on the application of groundwater modelling for environmental impact assessment. The results suggest that the choice of model parameterization has a significant influence on predictive uncertainty. The model using the simple parameterization provides predictions with a much wider range than the model with a more sophisticated parameterization. This is because that the lowly parameterized model tends to generate more extreme effective hydraulic parameter fields unless the parameterization simplification converts the inverse problem to a (close to) well-posed problem that rarely exists for applied regional groundwater modelling. The potential impact of model parameterization should be discussed explicitly in groundwater modelling applications to support decision making to avoid misinterpretation of the modelling results.     

The assessment of the Voice 200Ultra apparatus applicability to field investigations of air quality and odours

The ongoing urbanisation results in the decreased distance between residential areas and odour-generating municipal facilities. Odours are one of the crucial problems for people exposed to them, both locally and nationwide. Recently Syft Technologies company has been developing a new mobile device used for investigations of odorous compounds - Voice 200 Ultra. According to the manufacturer's declaration this device offers the possibility to carry out very precise odours measurements. Thus the attempt has been made to utilise that device for investigations of odorous compounds in one of Polish town.The primary goal of the research project has been to assess the applicability of the Voice 200Ultra method (developed by Syft Technologies) in the field odours measurements, in situ. That method is assumed to enable researchers to swiftly characterise and determine odorous chemical compounds in terms of quality and quantity.     

On the intensity and type transition of land use at the basin scale using RS/GIS: a case study of the Hanjiang River Basin

The purpose of this study is to investigate the land use intensity and land use change type at the basin scale in the middle and lower reaches of the Hanjiang River Basin (in Hubei Province, China) by combining the Landsat TM images in 1995 and 2000 with the land use database (in scale 1:10,000) and relative data. In this study, the basic data is acquired from the interpretation of remote sensing (RS) images. The intensity of land use and the rate of change in double-directions of land use dynamics are calculated with the support of software ARC/INFO. The intensity of land use is indicated by the intensity coefficient of land use, and the transition of land use types is quantified as the rate of change in double-direction of land use types and also expressed as the transition matrix of land use types. The results are expressed in space by Geographic Information System (GIS) software. Results of this study show that (1) the intensity of land use is high in the study region, the intensity coefficients of land use in 1995 and 2000 are 260.025 and 290.526, respectively, and the intensity of development and utilization of land is trend to increscent; and (2) the rate of land use change in double directions in the whole study region is 0.52 with great spatial variation and the differentiation of land use types. In the differentiation of land use types, the unutilized land (with the rate to 4.391) is developed fast, the grassland (with 2.836) and water area (with 1.664) are disturbed severely, and these changes will influence the eco-environment in the Hanjiang River Basin and all the Yangtze Basin. The rates of the farmland and the woodland are 0.424 and 0.344, respectively, meaning that the fundamentals of regional human-environmental system are relative stable. With this study, we can conclude that (1) the patterns of land use are increasingly changing in the study region, the environmental impacts are escalated on this stage, and the further outcomes are destined to change the stability of the regional human–environmental system; and (2) the most useful method to study the present land use and its change is through the use of the RS/GIS with the land use database (in scale 1:10,000).