Biogeochemical patterns in a river network along a land use gradient

The Bode catchment (Germany) shows strong land use gradients from forested parts of the National Park (23 % of total land cover) to agricultural (70 %) and urbanised areas (7 %). It is part of the Terrestrial Environmental Observatories of the German Helmholtz association. We performed a biogeochemical analysis of the entire river network. Surface water was sampled at 21 headwaters and at ten downstream sites, before (in early spring) and during the growing season (in late summer). Many parameters showed lower concentrations in headwaters than in downstream reaches, among them nutrients (ammonium, nitrate and phosphorus), dissolved copper and seston dry mass. Nitrate and phosphorus concentrations were positively related to the proportion of agricultural area within the catchment. Punctual anthropogenic loads affected some parameters such as chloride and arsenic. Chlorophyll a concentration and total phosphorus in surface waters were positively related. The concentration of dissolved organic carbon (DOC) was higher in summer than in spring, whereas the molecular size of DOC was lower in summer. The specific UV absorption at 254 nm, indicating the content of humic substances, was higher in headwaters than in downstream reaches and was positively related to the proportion of forest within the catchment. CO₂ oversaturation of the water was higher downstream compared with headwaters and was higher in summer than in spring. It was correlated negatively with oxygen saturation and positively with DOC concentration but negatively with DOC quality (molecular size and humic content). A principle component analysis clearly separated the effects of site (44 %) and season (15 %), demonstrating the strong effect of land use on biogeochemical parameters.     

Benthic Biological Processes and EH as a Basis for a Benthic Index

It is proposed that the common measures of benthic community condition can be augmented with a vertical EH profile taken through the benthic bioturbation zone. Sediment EH, an electrochemical measure of oxidized and reduced compounds in sediment porewater, measures the integrative consequences of all metabolic and transport processes of the benthic community. Biota, especially microbiota, metabolize carbon using a variety of electron acceptors, including O2, SO4 and some nitrogen and metal compounds. Motile benthic macrofauna ingest and transport particles, ventilate deep burrows and anoxic sediment with overlying seawater while sedentary suspension-feeding fauna deposit suspended organic matter onto the sediment surface. Collectively, these metabolic and behavioral processes advect particles and seawater between bottom water and deep sediment and define the overall structure of porewater chemistry. That structure creates a full spectrum of biogeochemical conditions of solubility, reactivity, and microbial metabolism which remineralizes excess organic carbon and most organic contaminants, defines solubility of trace metals, and pushes the vertical EH profile toward oxidizing conditions. It is proposed that a standard EH probe inserted downward through the bioturbation zone will provide a general measure of this resulting porewater chemistry and thus the impact of feeding, irrigation, and metabolism of the total macro, meio, and microbenthic community. If such a measure can be validated it will permit extended measurement of community function and reduced efforts in measuring community structure.     

Estimating Air Quality in a Traffic Tunnel Using a Forecasting Combination Model

This study performs a field analysis of the diffusion collection rate coefficients of radial geometry passive samplers to measure NO₂ in a Mediterranean coastal area. The study shows that the collection rate coefficients are not constant and depend on certain environmental parameters as well as on the levels of some co-pollutants. A mathematical model, which explains the variation of the collection rate coefficient, has been established.     

Using statistical power analysis as a tool when designing a monitoring program: experience from a large-scale Swedish landscape monitoring program

The National Inventory of Landscapes in Sweden (NILS) is a large-scale, sample-based monitoring program that combines aerial photointerpretation with field inventory to follow landscape-scale biophysical conditions and changes. A statistical power analysis was conducted before the NILS program began in 2003 with the aim to determine an appropriate sampling effort and compare some design alternatives. The chosen sampling effort was then evaluated in a second power analysis conducted just before the first 5-year re-inventory rotation started. The latter power analysis revealed which magnitude of actual change might be detected within the future for different central monitoring variables. This article reports results from these power analyses and discusses our experiences in using power analysis as a tool for designing large-scale monitoring programs. The results showed that even quite small changes in the more common variables, such as land cover types and more common plant species, can be detected on the national scale. However, on the regional scale, or for less common variables, changes will be more difficult to detect. The power analyses have revealed the size level of changes that will be possible to detect. The results have also generated incentives for further improvements of NILS, e.g., input to the modification and revision of the variable content, flow and hierarchy, and incentives for launching other complementary monitoring programs connected to NILS. They have also created a basis for a better and more user-oriented communication of results from NILS to different stakeholders.     

Characterizing ozone pollution in a petrochemical industrial area in Beijing,China: a case study using a chemical reaction model

This study selected a petrochemical industrial complex in Beijing, China, to understand the characteristics of surface ozone (O₃) in this industrial area through the on-site measurement campaign during the July–August of 2010 and 2011, and to reveal the response of local O₃ to its precursors’ emissions through the NCAR-Master Mechanism model (NCAR-MM) simulation. Measurement results showed that the O₃ concentration in this industrial area was significantly higher, with the mean daily average of 124.6 μg/m³ and mean daily maximum of 236.8 μg/m³, which are, respectively, 90.9 and 50.6 % higher than those in Beijing urban area. Moreover, the diurnal O₃ peak generally started up early in 11:00–12:00 and usually remained for 5–6 h, greatly different with the normal diurnal pattern of urban O₃. Then, we used NCAR-MM to simulate the average diurnal variation of photochemical O₃ in sunny days of August 2010 in both industrial and urban areas. A good agreement in O₃ diurnal variation pattern and in O₃ relative level was obtained for both areas. For example of O₃ daily maximum, the calculated value in the industrial area was about 51 % higher than in the urban area, while measured value in the industrial area was approximately 60 % higher than in the urban area. Finally, the sensitivity analysis of photochemical O₃ to its precursors was conducted based on a set of VOCs/NOx emissions cases. Simulation results implied that in the industrial area, the response of O₃ to VOCs was negative and to NOx was positive under the current conditions, with the sensitivity coefficients of ?0.16~?0.43 and +0.04~+0.06, respectively. By contrast, the urban area was within the VOCs-limitation regime, where ozone enhancement in response to increasing VOCs emissions and to decreasing NOx emission. So, we think that the VOCs emissions control for this petrochemical industrial complex will increase the potential risk of local ozone pollution aggravation, but will be helpful to inhibit the ozone formation in Beijing urban area through reducing the VOCs transport from the industrial area to the urban area.     

The Composition of PM10 as collected by a Conventional TEOM, a Modified TEOM and a Partisol Gravimetric Monitor at a Kerbside Site in the North East of England

The composition of airborne particulate matter sampled by a conventional TEOM^®, an experimental modified TEOM, operated at a lower temperature but fitted with a drier to remove moisture and a Partisol^®, installed at a kerbside site in the North East of England, has been investigated. The results indicate that there is a seasonal variation in the composition of PM₁₀ as sampled by the three monitors, with chloride concentration being significantly higher in the winter. The Partisol was found to sample a higher mass of chloride and nitrate, however the differences between the monitors was only significant for chloride. Both TEOM's were found to sample a greater mass of sulphate, although the variability in the data collected meant that significance of the results was not proven statistically. The range of artifacts associated with PM₁₀ monitors is reviewed. Difficulties in the interpretation of results due to the variable nature of airborne particulate matter and the ability of filter based systems to accurately represent the composition of atmospheric particles are considered.     

The composition of PM10 as collected by a conventional TEOM, a modified TEOM and a Partisol gravimetric monitor at a kerbside site in the North East of England

The composition of airborne particulate matter sampled by a conventional TEOM, an experimental modified TEOM, operated at a lower temperature but fitted with a drier to remove moisture and a Partisol, installed at a kerbside site in the North East of England, has been investigated. The results indicate that there is a seasonal variation in the composition of PM(10) as sampled by the three monitors, with chloride concentration being significantly higher in the winter. The Partisol was found to sample a higher mass of chloride and nitrate, however the differences between the monitors was only significant for chloride. Both TEOM's were found to sample a greater mass of sulphate, although the variability in the data collected meant that significance of the results was not proven statistically. The range of artifacts associated with PM(10) monitors is reviewed. Difficulties in the interpretation of results due to the variable nature of airborne particulate matter and the ability of filter based systems to accurately represent the composition of atmospheric particles are considered.     

evaluation of a measurement method for forest vegetation in a large-scale ecological survey

We evaluate a field method for determining species richness andcanopy cover of vascular plants for the Forest Health MonitoringProgram (FHM), an ecological survey of U.S. forests. Measurementsare taken within 12 1-m² quadrats on 1/15 ha plots in FHM.Species richness and cover are determined for four height classes(strata) within each quadrat and aggregated by stratum over the entireplot. We estimated (1) the agreement between experienced trainers andinexperienced technicians who collected the data on this survey(accuracy) and (2) the agreement among the technicians (precision) forresults on species richness and cover from 3 test plots at 3 timeintervals. The methods appear to be highly precise, although somediscrepancies with the values obtained by the trainers were found.Trainers found significantly more species in the ground stratum (0–0.6 m) and measured significantly more cover in the uppermost stratum(>4.9 m). The proportion of variation due to measurement error andtemporal variability was less than 13% for species richness (all strata)and cover (all but one stratum). This indicates that the method issuitable for monitoring changes in species richness and canopy coverfor a large-scale synoptic monitoring project such as FHM.     

Evaluation of a fast wastewater odour characterisation procedure using a chemical sensor array

Sewage treatment works are one of the major sources that cause atmospheric odour pollution. The increase in the number of complaints about odour nuisance is due to the increase in environmental concerns. Unfortunately, the legislation on odour nuisance from sewage treatment works is very limited. In order to determine suitable thresholds on which to base legal standards, reliable and efficient odour measurement methods need to be defined. A chemical sensor array was developed for the purpose of measuring wastewater odour. This paper describes the development of the chemical sensor system which is specifically tuned to odours of wastewater origin and which can give an electronic measure of the wastewater odours. Odour emissions from a wastewater treatment facility were detected by using a quartz crystal microbalance (QCM) sensor array. The array consists of nine sensor elements, which were coated with different materials. In this paper, the usage of these novel instruments in the water industry was shown.     

Development of a calibration system to evaluate VOC losses in a branch enclosure

Considerable uncertainties are associated with the experimental estimates of emission rates of different volatile organic compound (VOC) species from the biosphere to the atmosphere. Some of this uncertainty derives from the sampling and analytical procedures used in emission rate measurements. A calibration system was developed in order to evaluate possible errors in the measurements of biogenic emission rates using a branch enclosure system. Two types of calibration procedures were tested, a standard additions technique and an internal standard procedure. Both techniques were used to evaluate possible losses while sampling isoprene and monoterpenes, which are the most abundant VOCs of biogenic origin. The losses to Teflon lines and the empty sampling system were tested and losses to the branch enclosure system installed on two VOC emitting plant species were evaluated. A considerable loss of isoprene (approximately 18% of inflow concentration 65 ng l(-1)) to the empty enclosure system and to the system installed on the plant was measured, but no losses of monoterpenes were observed.     

Prototyping a Vision for Inter-Agency Terrestrial Inventory and Monitoring: a Statistical Perspective

A demonstration project in Oregon examined the feasibility of combining Federal environmental monitoring surveys. An integrated approach should remove duplication of effort and reduce the possibility of providing apparently conflicting information to policy makers and the public. Data collection teams made photo interpretation measurements and on-site soil/vegetation/animal observations at locations that were selected from the Forest Inventory and Analysis (FIA), National Forest System (NFS) Region 6, and National Resource Inventory (NRI) surveys in a six-county area in Northern Oregon. The project demonstrated the feasibility of conducting a combined FIA/NFS/NRI survey and suggests an approach that will preserve the utility of the critical historical information from these surveys. We suggest a framework for estimating the extent of forest and range land that explains FIA/NRI differences and provides a common basis for both surveys. We suggest indicator and protocol criteria that will allow consistent national and regional estimates over all vegetation types, and stress the importance of including measurement repeatability in the design of the combined survey.     

Cryptogamic community structure as a bioindicator of soil condition along a pollution gradient

This study aims to determine changes in the structure of cryptogamic vegetation of poor psammophilous grassland along a pollution gradient near a zinc smelter to evaluate the potential of species assemblages as bioindicators of soil condition. Lichens and bryophytes were examined in study plots along six transects in four distance zones, and the physicochemical properties of corresponding soil samples were analysed. Four different responses of species to substrate contamination were identified, with a distinct group of species resistant to and favoured by metal contamination. Although species richness decreases as one approaches the smelter, the gradual replacement of certain sensitive species by resistant ones was observed along the pollution gradient. The results enabled us to develop a useful tool to diagnose strongly polluted sites. Two different cryptogamic assemblages of well-recognised key species characteristic for strongly polluted and lightly polluted sites were distinguished. We conclude that cryptogamic community structure clearly corresponds to the degree of soil contamination, thus demonstrating high bioindicative value. The study confirmed the high relevance of the community approach in metal pollution biomonitoring.     

The determination of carbonyl compounds in air using a robotic sampling preparation system integrated to a gas chromatograph with a nitrogen-phosphorus detector

A totally automated solid phase extraction gas chromatography procedure was developed for the sampling and analysis of carbonyl compounds in air. In this system, two PrepStation modules were used, one for the preparation and elution of 2,4-dinitrophenylhydrazine silica cartridges, and the other for air sampling. The sample collected by the sampling module was eluted to an autosampler vial in the PrepStation module and then transferred to the gas chromatograph for analysis via a robotic arm. The sampling module was modified to enable air sampling via an external pump. A typical run by this technique required 142 min, 100 min for air sampling and 42 min for the other operations, including a GC analysis time of 25 min. Recoveries of at least 85% were obtained for all compounds studied. The detection limits for formaldehyde, acetaldehyde and acetone were 2.2, 2.7 and 2.2 ppbv, respectively. All operations, including the conditioning of the cartridges, were performed without any intervention from the analyst.     

Multi-objective, decision-based assessment of a water quality monitoring network in a river system

Water quality monitoring network design has historically tended to use experience, intuition and subjective judgement in locating monitoring stations. Better design procedures to optimize monitoring systems need to simultaneously identify significant planning objectives and consider a number of social, economic and environmental constraints. The consideration of multiple objectives may require further decision analysis to determine the preference weights associated with the objectives to aid in the decision-making process. This may require the application of an optimization study to extract such information from decision makers or experts and to evaluate the overall effectiveness of locating strategies. This paper assesses the optimal expansion and relocation strategies of a water quality monitoring network using a two-stage analysis. The first stage focuses on the information retrieval of preference weights with respect to the designated planning objectives. With the aid of a pre-emptive goal programming model, data analysis is applied to obtain the essential information from the questionnaire outputs. The second stage then utilizes a weighted multi-objective optimization approach to search for the optimal locating strategies of the monitoring stations in the river basin. Practical implementation is illustrated by a case study in the Kao-Ping River Basin, south Taiwan.     

Development of a harmonised phosphorus extraction procedure and certification of a sediment reference material

A harmonised procedure for the determination of the forms of phosphorus in freshwater sediments, developed in the frame of the European Programme, Standards, Measurements and Testing (SMT) has been used for a certification campaign for a reference material. This operationally defined scheme is a good compromise between method performance and reproducibility. Furthermore, the method is rather simple to implement and could be used by water managers on a routine basis. A homogeneous and stable sediment reference material has been prepared and will be available before mid 2001. The so-called SMT protocol, together with the reference material, are useful tools in the field of water management, especially at a time when quality assurance is of paramount importance in laboratory analyses. Knowledge of the bioavailable forms of phosphorus is important not only for analysis of sediments but also for sludge and soils. Therefore, the SMT protocol could be extended to these materials.     

Evaluating Habitat as a Surrogate for Population Viability Using a Spatially Explicit Population Model

Because data for conservation planning are always limited, surrogates are often substituted for intractable measurements such as species richness or population viability. We examined the ability of habitat quality to act as a surrogate for population performance for both Red-shouldered Hawks (Buteo lineatus) and Northern Goshawks (Accipiter gentilis). We compared simple measures of habitat quality to estimates of population growth rates obtained from a spatially explicit model of population dynamics. We found that habitat quality was a relatively poor predictor of simulated population growth rates for several reasons. First, a relatively small proportion of the potential habitat for each species served as population sources in our simulations--15% for Red-shouldered Hawks and 2% for Goshawks. Second, when habitat quality correctly predicted demographic sources on the landscape, it consistently underestimated the contribution of these areas to the population. In areas where habitat quality correctly anticipated the presence of demographic sinks, we found no useful quantitative relationship between the two measures. Our simulation model captured the influence of habitat quality on the hawk populations, but it also incorporated interactions between dispersing individuals and landscape patterns. Thus, the discrepancies we observed likely reflected the influence of forest fragmentation and the spatial arrangement of forest patches on the populations. We conclude that simple measures of habitat quality will often be poor surrogates for population persistence, but that spatially explicit population models can help inform the development of better indices.