Application of Fenton, photo-Fenton, solar photo-Fenton, and UV/H2O2 to degradation of the antineoplastic agent mitoxantrone and toxicological evaluation

In the present study, selected advanced oxidation processes (AOPs)—namely, photo-Fenton (with Fe²⁺, Fe³⁺, and potassium ferrioxalate—FeOx—as iron sources), solar photo-Fenton, Fenton, and UV/H₂O₂—were investigated for degradation of the antineoplastic drug mitoxantrone (MTX), frequently used to treat metastatic breast cancer, skin cancer, and acute leukemia. The results showed that photo-Fenton processes employing Fe(III) and FeOx and the UV/H₂O₂ process were most efficient for mineralizing MTX, with 77, 82, and 90 % of total organic carbon removal, respectively. MTX probably forms a complex with Fe(III), as demonstrated by voltammetric and spectrophotometric measurements. Spectrophotometric titrations suggested that the complex has a 2:1 Fe³⁺:MTX stoichiometric ratio and a complexation constant (K) of 1.47 × 10⁴ M^–1, indicating high MTX affinity for Fe³⁺. Complexation partially inhibits the involvement of iron ions and hence the degradation of MTX during photo-Fenton. The UV/H₂O₂ process is usually slower than the photo-Fenton process, but, in this study, the UV/H₂O₂ process proved to be more efficient due to complexing of MTX with Fe(III). The drug exhibited no cytotoxicity against NIH/3T3 mouse embryonic fibroblast cells when oxidized by UV/H₂O₂ or by UV/H₂O₂/FeOx at the concentrations tested.     

Applicability of Fenton and H2O2/UV reactions in the treatment of tannery wastewaters

In this paper we evaluated the H2O2/UV and the Fenton's oxidation processes for the treatment of tannery wastewater under different experimental conditions. Efficiencies were judged by the amounts of organic substances degraded or eliminated under these treatment techniques. Daphnia magna and Vibrio fischeri were used to monitor toxicity. Organic compounds contained in the untreated and treated tannery wastewater were determined and identified using substance specific techniques. Gas chromatography-mass spectrometry (GC-MS) in positive electron impact (EI(+)) mode was applied to determine volatile organics. Atmospheric pressure ionization (API) mass (MS) and tandem mass spectrometry (MS-MS) coupled with flow injection analysis (FIA) or liquid chromatography (LC) were used to detect or identify polar organic pollutants. The experimental results indicated that both oxidation processes--H2O2/UV at pH 3 and Fenton at pH 3.5--are able to reduce TOC content by mineralisation of the organic compounds.     

Removal of emerging pollutants in aqueous phase by heterogeneous Fenton and photo-Fenton with Fe2O3-TiO2-clay heterostructures

Environmental Science and Pollution Research - Fe2O3-TiO2-clay heterostructures have been prepared using an organo-bentonite as support, which organophilic character favored the fixation of TiO2....     

Experimental design of Fenton and photo-Fenton reactions for the treatment of cellulose bleaching effluents

Multivariate experimental design was applied to the treatment of a cellulose conventional bleaching effluent in order to evaluate the use of the Fenton reagent under solar light irradiation. The effluent was characterised by the general parameters total organic carbon (TOC), chemical oxygen demand and color, and it was analysed for chlorinated low molecular weight compounds using GC–MS. The main parameters that govern the complex reactive system: Fe(II) and H₂O₂ initial concentration, and temperature were simultaneously studied. Factorial experimental design allowed to assign the weight of each variable in the TOC removal after 15 min of reaction. Temperature had an important effect in the organic matter degradation, especially when the ratio of Fenton reagents was not properly chosen. Fenton reagent under solar irradiation proved to be highly effective for these types of wastewaters. A 90% TOC reduction was achieved in only 15 min of treatment. In addition, the GC–MS analysis showed the elimination of the chlorinated organic compounds initially detected in the studied bleaching effluents.     

Modified Fenton reaction for trichlorophenol dechlorination by enzymatically generated H2O2 and gluconic acid chelate

Glucose oxidase is a well-known enzyme that catalyzes the oxidation of β-d-glucose to produce gluconic acid and hydrogen peroxide. Fenton reaction is a powerful oxidation technology used for the oxidation of groundwater pollutants. For the application of Fenton reaction in groundwater remediation, successful operation of Fenton reaction near neutral pH, and on-site generation of both H₂O₂ and chelate will be beneficial. The focus of this experimental study was to couple the glucose oxidation reaction with chelate-based Fenton reaction. The idea was to use the hydrogen peroxide and chelate gluconic acid generated during glucose oxidation for the dechlorination of 2,4,6-trichlorophenol (TCP) by Fenton reaction. The oxidation of glucose was achieved using the enzyme in free and immobilized forms. The rate of production of hydrogen peroxide was determined for each system, and was used to estimate the time required for complete consumption of glucose during the process, thus avoiding any traces of glucose in the Fenton reaction. In the case of free enzyme reaction, separation of the enzyme was achieved using an ultrafiltration membrane before initiating the Fenton reaction. The oxidation of TCP by Fenton reaction was performed at varying ratios of gluconic acid/Fe, and its effect on the decomposition of TCP and H₂O₂ was studied. TCP degradation was studied both in terms of parent compound degradation and free chloride generation.     

Kinetic degradation of the pollutant guaiacol by dark Fenton and solar photo-Fenton processes

This work is first intended to optimize the experimental conditions for the maximum degradation of guaiacol (2-methoxyphenol) by Fenton’s reagent, and second, to improve the process efficiency through the use of solar radiation. Guaiacol is considered as a model compound of pulp and paper mill effluent. The experiments were carried out in a laboratory-scale reactor subjected or not to solar radiation. Hydrogen peroxide solution was continuously introduced into the reactor at a constant flow rate. The kinetics of organic matter decay was evaluated by means of the chemical oxygen demand (COD) and the absorbance measurements. The experimental results showed that the Fenton and solar photo-Fenton systems lead successfully to 90% elimination of COD and absorbance at 604 nm from a guaiacol solution under particular experimental conditions. The COD removal always obeyed a pseudo-first-order kinetics. The effect of pH, temperature, H₂O₂ dosing rate, initial concentration of Fe²⁺, and initial COD was investigated using the Fenton process. The solar photo-Fenton system needed less time and consequently less quantity of H₂O₂. Under the optimum experimental conditions, the solar photo-Fenton process needs a dose of H₂O₂ 40% lower than that used in the Fenton process to remove 90% of COD.     

Degradation of rhodamine B by Fe(0)-based Fenton process with H2O2

Degradation of rhodamine B by Fe(0)-based Fenton process with H₂O₂ was investigated. The effects of H₂O₂ dose, Fe(0) dose, initial concentration of rhodamine B and initial pH value on the degradation of rhodamine B were examined. The results showed that the degradation and mineralization of rhodamine B occurred with low dose of H₂O₂ and Fe(0). The intermediates of rhodamine B were analyzed with UV-Vis spectrophotometry and ion chromatography and the mechanism of oxidative degradation of rhodamine B was also discussed. The reactive oxygen species (·OH) produced in Fe(0)-based Fenton process with H₂O₂ is the key to the degradation of rhodamine B by ways of N-de-ethylation, chromophore cleavage, ring-opening and mineralization.     

Decolorization of synthetic dyes by the Fenton reagent and the Cu/pyridine/H2O2 system

Representative azo, triphenylmethane, heterocyclic and polymeric synthetic dyes have been decolorized by two biological non-ezymatic systems, copper/pyridine/H2O2 and the Fenton reagent. With the former system, intensive decolorization measured after 1 h was obtained with phenol red (89%), tropaeolin 00 (58%), Evans blue (95%), eosin yellowish (84%), and Poly B-411 (92%). The rate of decolorization was not affected by pH in the range of 3-9 and increased with increasing temperature. The use of the radical scavengers thiourea and superoxide dismutase showed that hydroxyl radicals rather than superoxide anions are involved in the reaction. Omission of pyridine led to a substantial decrease in the extent of decolorization (20-50% decolorization). The use of organic peroxide instead of H2O2 resulted in slightly slower decolorization, similar values of decolorization being obtained only after a 2-h incubation. Decolorization of the dyes by the Fenton reagent was also very effective but slower than that obtained with the first system. Except for phenol red and eosin yellowish, (decolorization 8% and 52%, respectively) the dyes were decolorized up to 99% after 1-day incubation.     

Degradation of the pharmaceutical metronidazole via UV, Fenton and photo-Fenton processes

Degradation rates and removal efficiencies of Metronidazole using UV, UV/H2O2, H2O2/Fe2+, and UV/H2O2/Fe2+ were studied in de-ionized water. The four different oxidation processes were compared for the removal kinetics of the antimicrobial pharmaceutical Metronidazole. It was found that the degradation of Metronidazole by UV and UV/H2O2 exhibited pseudo-first order reaction kinetics. By applying H2O2/Fe2+, and UV/H2O2/Fe2+ the degradation kinetics followed a second order behavior. The quantum yields for direct photolysis, measured at 254 nm and 200-400 nm, were 0.0033 and 0.0080 mol E(-1), respectively. Increasing the concentrations of hydrogen peroxide promoted the oxidation rate by UV/ H2O2. Adding more ferrous ions enhanced the oxidation rate for the H2O2/Fe2+ and UV/H2O2/Fe2+ processes. The major advantages and disadvantages of each process and the complexity of comparing the various advanced oxidation processes on an equal basis are discussed.     

The role of ferrous ion in Fenton and photo-Fenton processes for the degradation of phenol

The efficiency of different Fenton-related oxidative processes such as Fenton, solar-Fenton and UV-Fenton were examined using phenol as a model compound in simulated and industrial wastewater. A batch study was conducted to optimize parameters like pH, hydrogen peroxide concentration and ferrous ion concentration governing the Fenton process. At optimum conditions, different Fenton-related processes were compared for the degradation of phenol. Increased degradation and mineralisation efficiency were observed in photo-Fenton processes as compared to conventional Fenton process. The maximum mineralising efficiency for phenol with Fenton, solar and UV-Fenton processes were 41%, 96% and 97% respectively. In Fenton process, carboxylic acids like acetic acid and oxalic acid were formed as end products during the degradation of phenol while in photo-Fenton processes, both these ions were identified during the early stages of phenol degradation and were oxidized almost completely at 120 min of the reaction time. In photo-Fenton processes (solar and UV light) complete degradation were observed with 0.4 mM of Fe2+ catalyst as compared to 0.8 mM of Fe2+ in conventional Fenton process. In Fenton and solar-Fenton processes, an iron reusability study was performed to minimize the amount of iron used in treatment process. The efficacy of Fenton and solar-Fenton processes was applied to effluent from phenol resin-manufacturing unit for the removal and mineralisation of phenol.     

UV/H2O2/Fe-FeOxH2x-3和UV/H2O2工艺降解水中富里酸的研究

采用硼氢化钠还原法制备核-壳结构的Fe-FeOxH2x-3复合材料,研究了富里酸在UV/H2O2和UV/H2O2/Fe-FeOxH2x-3两种不同反应体系下的降解情况。结果表明,核-壳结构Fe-FeOxH2x-3的存在,提高了UV/H2O2降解富里酸的反应速率,TOC去除达到84%。采用XAD树脂吸附法对反应前后的富里酸进行化学分级表征,结果表明,富里酸经反应后憎水酸（HoA）、弱憎水酸（WHoA）和憎水中性物质（HoN）都有所减少,进而转化为亲水性物质（HiM）;用超滤膜法对富里酸进行物理分级表征,考察了富里酸在反应前后分子量分布的变化情况。同时,富里酸经过反应后生成的中间产物降低了三氯甲烷生成趋势。     

H2O2/Fe0、H2O2/Fe2+、H2O2/Fe3+3种体系处理印染废水

采用H2O2/Fe0、H2O2/Fe2+、H2O2/Fe3+3种体系分别对印染废水进行处理,研究pH 值、H2O2投加量、不同价态铁元素的投加量及反应时间对印染废水的COD和色度处理效果的影响。实验最佳的处理条件:H2O2/Fe0体系在pH 为3.0,Fe0投加量为3.0 mmol/L,H2O2投加量为9.0 mL/L,反应时间为40 min时,COD去除率达到95.99%,色度去除率达到100%;H2O2/Fe3+体系在pH 为3.0,Fe3+投加量为5.0 mmol/L,H2O2投加量为12.5 mL/L,反应时间为100 min时,COD去除率达到95.89%,色度去除率达到100%;H2O2/Fe2+体系在pH 为3.0,Fe2+投加量为6.0 mmol/L,H2O2投加量为12.0 mL/L,反应时间为100 min时,COD去除率达到95.85%,色度去除率达到100%。对比分析3种体系在各因素下的处理结果,H2O2/Fe0体系和H2O2/Fe3+体系都要优于H2O2/Fe2+体系,其中H2O2/Fe0体系的处理效果最好。     

Degradation and decolorization of a biodegradable-resistant polymeric dye by chelator-mediated Fenton reactions

Chelator-mediated Fenton reactions (CMFRs) were used to decolorize a biodegradable-resistant polymeric dye (Poly R-478). Screening of different iron chelators was performed on Fe(3+)-reduction activity. All chelators showed Fe(3+)-reduction activity over a wide range of pH (2-7) and each mol of catecholate chelators (3,4-dihydroxiphenilacetic acid--DOPAC and 2,3-dihydroxibenzoic acid--DHBA) reduced about 5-6 moles of Fe(3+) whereas hydroxamate chelators (acetohydroxamic acid-AHA and desferrioxamine B-DFB) reduced Fe(3+) stoichiometrically. The most effective decolorization of Poly R-478 was achieved by CMFR using catecholate chelators. In addition, a 2(4) factorial design was performed with the aim of evaluating the effects of the variables considered in this study (pH, [DOPAC], [Fe(3+)] and [H(2)O(2)]) and optimizing the dye decolorization, using response surface methodology. Statistical analysis of results showed that, in the range studied, except for Fe(3+), all variables have a significant effect on dye decolorization. A second-order model is proposed to represent the Poly R-478 decolorization. At optimum conditions, complete decolorization of the dye (degradation of the chromophoric group) and also complete chemical degradation of the dye was observed.     

Treatment of pharmaceutical wastewater containing antibiotics by O3 and O3/H2O2 processes

Ozonation of three different synthetic pharmaceutical formulation wastewater containing two human antibiotics and a veterinary antibiotic has been studied to enhance the their biodegradability. The effects of pH and initial chemical oxygen demand (COD) value as well as addition of hydrogen peroxide on ozonation process were investigated. Total organic carbon (TOC), COD, biochemical oxygen demand (BOD), and aromatic content (UV254) were the parameters followed to evaluate the performance of ozonation process. Comparison of the biodegradability of selected wastewaters containing different antibiotics confirmed that the variation of biodegradability was associated with the target compound. While BOD5/COD ratio of veterinary antibiotic formulation wastewater was increased from 0.077 to 0.38 with an applied ozone dosage of 2.96 g/l, this ratio for human antibiotic I and human antibiotic II was increased from 0 to 0.1 and 0.27 respectively. Moreover the results of this investigation showed that the ozonation process is capable of achieving high levels of COD and aromaticity removals at about their natural pH values.     

Oxidation of MCPA and 2,4-D by UV radiation, ozone, and the combinations UV/H2O2 and O3/H2O2

The phenoxyalkyl acid derivative herbicides MCPA (4-chloro 2-methylphenoxyacetic acid) and 2,4-D (2,4-dichlorophenoxyacetic acid) were oxidized in ultrapure water by means of a monochromatic UV irradiation and by ozone, as well as by the combinations UV/H2O2 and O3/H2O2. In the direct photolysis of MCPA, the quantum yield at 20 degrees C was directly evaluated and a value of 0.150 mol Eins(-1) was obtained in the pH range 5-9, while a lower value of 0.41 x 10(-2) mol Eins(-1) was determined at pH=3. Similarly, for 2,4-D a value of 0.81 x 10(-2) mol Eins(-1) was deduced, independent of the pH of work. The influence of the additional presence of hydrogen peroxide was established in the combined process UV/H2O2, and the specific contribution of the radical pathway to the global photo-degradation was evaluated. The oxidation by ozone and by the combination O3/H2O2 was also studied, with the determination of the rate constants for the reactions of both herbicides with ozone and hydroxyl radicals at 20 degrees C. These rate constants for the direct reactions with ozone were 47.7 and 21.9 M(-1) s(-1) for MCPA and 2,4-D respectively, while the found values for the rate constants corresponding to the radical reactions were 6.6 x 10(9) and 5.1 x 10(9) M(-1) s(-1).     

O3/H2O2法去除浮选药剂丁基黄药

采用O3/H2O2法去除水中丁基黄药,考察了H2O2/O3摩尔比、pH值、丁基黄药初始浓度、温度和自由基抑制剂对丁基黄药的去除效果的影响。结果表明,在相同O3投加量下,H2O2量越大,丁基黄药去除率越高。pH值为7～9,温度在293～303 K的范围内,O3/H2O2对丁基黄药都有很高的去除率。碳酸氢根和叔丁醇能在一定程度上降低丁基黄药的降解效率。研究还发现,在O3和H2O2投加量相同的条件下,H2O2多次投加对水中丁基黄药的处理效果明显优于一次性投加。GC/MS分析表明,O3/H2O2氧化丁基黄药氧化产物为羧酸类物质。     

Kinetics of oxidation of chlorobenzenes and phenyl-ureas by Fe(II)/H2O2 and Fe(III)/H2O2. Evidence of reduction and oxidation reactions of intermediates by Fe(II) or Fe(III)

The rates of degradation of 1,2,4-trichlorobenzene (TCB), 2,5-dichloronitrobenzene (DCNB), diuron and isoproturon by Fe(II)/H2O2 and Fe(III)/H2O2 have been investigated in dilute aqueous solution ([Organic compound]0 approximately 1 microM, at 25.0 +/- 0.2 degrees C and pH < or = 3). Using the relative rate method with atrazine as the reference compound, and the Fe(II)/H2O2 (with an excess of Fe(II)) and Fe(III)/H2O2 systems as sources of OH radicals, the rate constants for the reaction of OH* with TCB and DCNB were determined as (6.0 +/- 0.3)10(9) and (1.1 +/- 0.2)10(9) M(-1) s(-1). Relative rates of degradation of diuron and isoproturon by Fe(II)/H2O2 were about two times smaller in the absence of dissolved oxygen than in the presence of oxygen. These data indicate that radical intermediates are reduced back to the parent compound by Fe(II) in the absence of oxygen. Oxidation experiments with Fe(III)/H2O2 showed that the rate of decomposition of atrazine markedly increased in the presence of TCB and this increase has been attributed to a regeneration of Fe(II) by oxidation reactions of intermediates (radical species and dihydroxybenzenes) by Fe(III).     

UV/H2O2工艺降解环丙沙星的研究

采用UV/H2O2工艺去除水体中的喹诺酮类抗生素环丙沙星（CIP）。考察了溶液pH值、H2O2投加量以及水体基质对环丙沙星降解效率的影响,分析了降解产物的生成情况。研究表明,环丙沙星的降解符合拟一级反应动力学模型。降解速率受溶液pH值的影响,酸性及中性条件,有利于环丙沙星的降解。H2O2投加量的增大,使得降解速率逐渐增大,但速率增幅逐渐变缓;最佳H2O2/环丙沙星摩尔比为2 000。实际水体中存在的NOM、NO3-,促进了单独UV作用下,环丙沙星的降解。水体中的.OH焠灭剂,抑制了UV/H2O2联合作用下,环丙沙星的降解;实际水体中的光解速率常数低于超纯水中的光解速率常数。GC-MS分析表明,UV/H2O2工艺,使环丙沙星氧化降解生成氨基乙酸、丙二酸、丙三醇和对苯二甲酸等小分子有机物。     

Dibenzothiophene oxidation by horseradish peroxidase in organic media: effect of the DBT:H2O2 molar ratio and H2O2 addition mode

Its is well known that in the biodesulfurization (BDS) process the low water solubility of sulfur compounds hinders its transference from the oil phase to the cells being the rate-limiting step in the metabolism of dibenzothiophenes (DBT). Thus sulfur compounds derivatives with high water solubility could be more easily transported increasing the BDS efficiency. The present work performed a stepwise evaluation of the enzymatic oxidation of DBT by horseradish peroxidase (HRP). Reactions were carried out in monophasic organic media containing 25% (v/v) acetonitrile. The following parameters were evaluated: DBT:H2O2 molar ratio (1:1-1:20); H2O2 addition mode (single or stepwise); pH (6.0-8.0) and temperature (37-50 degrees C). Best results were observed in a reaction medium at pH 8.0 presenting HRP 0.06IUml(-1), DBT 0.267mM, DBT:H2O2 molar ratio of 1:20 (stepwise hydrogen peroxide addition) and incubated at 45 degrees C for 60min. Under these conditions 60% of DBT was converted into dibenzothiophene sulfoxide (12%) and dibenzothiophene sulfone (46%). The DBT oxidation rate observed in this work, of 5mmolmin(-1)g(-1) of HRP, was 250-fold higher than the BDS rate, 20mumolmin(-1)g(-1) of catalyst. As such a combined enzyme-microbial desulfurization process could be envisaged. Products were determined by HPLC RP C-18.     

O3/H2O2降解阿特拉津影响因素研究

采用O3/H2O2氧化去除水中内分泌干扰物阿特拉津,考察了反应条件及水质对去除的影响,并对反应机制进行了初步探讨。阿特拉津初始浓度2 mg/L,投量为7.5 mg/L的O3单独氧化去除率为27.2%;相同O3投量下,控制H2O2/O3摩尔比为0.75,5 min阿特拉津的去除率最高可达96.5%;pH 值为7.5～8.5,温度在25～40℃的范围内,都维持了较高的去除率,表明H2O2/O3体系对阿特拉津的去除效果良好,降解速度快,反应条件温和。0.5 mg/L的腐殖酸,对阿特拉津的去除影响不大,腐殖酸浓度为1、2和5 mg/L时,平均去除率分别为63.4%、50.7%和30.2%;碳酸氢钠的浓度为50和200 mg/L时,去除率分别为88.1%和73.8%,说明水质对阿特拉津的去除影响较大。叔丁醇的浓度为5和20 mg/L时,阿特拉津的去除率分别降低到44.7%和27.5%,去除率随自由基抑制剂叔丁醇增加而降低,说明H2O2/O3降解阿特拉津主要为该体系产生的羟基自由基的贡献。