Biodegradability and Biodegradation of Polyesters

A variety of biodegradable plastics have been developed in order to obtain useful materials that do not cause harm to the environment. Among the biodegradable plastics, aliphatic polyesters such as: poly(3-hydroxybutyrate) (PHB), poly(ε-caprolactone) (PCL), poly(butylene succinate) (PBS), and poly(l-lactide) (PLA) have become the focus of interest because of their inherent biodegradability. However, before their widespread applications, comprehensive studies on the biodegradability and biodegradation mechanisms of these polyesters are necessary. Thus, this paper describes the degradation mechanisms and the effects of various factors on the degradation of polyesters. The distribution of polymer-degrading microorganisms in the environment, different microorganisms and enzymes involved in the degradation of various polyesters are also discussed.     

Degradation of chlorinated dioxin in denitrifying activated sludge from leachate treatment plant of a landfill

The degradation rate of dioxins added to the activated sludge from a leachate treatment plant of a landfill under denitrification conditions was estimated using six bioreactors. Over 99% of the added dioxins (600ng) were degraded within 7 days. Furthermore, continuous cultivation was carried out for 1 month. The activated sludge degraded 600ng of dioxins (that is, all of the added dioxins) placed in each reactor every 7 days, and this activity was maintained for 35 days. Under aerobic conditions with this sludge, the dioxins were not degraded in 7 days, but 90% of the 600ng of dioxins was degraded in 35 days. The high level of activity observed in the present study may only occur under anaerobic conditions, especially under denitrifying conditions.     

Biodegradability and biodegradation rate of poly(caprolactone)-starch blend and poly(butylene succinate) biodegradable polymer under aerobic and anaerobic environment

The biodegradability and the biodegradation rate of two kinds biodegradable polymers; poly(caprolactone) (PCL)-starch blend and poly(butylene succinate) (PBS), were investigated under both aerobic and anaerobic conditions. PCL-starch blend was easily degraded, with 88% biodegradability in 44 days under aerobic conditions, and showed a biodegradation rate of 0.07 day⁻¹, whereas the biodegradability of PBS was only 31% in 80 days under the same conditions, with a biodegradation rate of 0.01 day⁻¹. Anaerobic bacteria degraded well PCL-starch blend (i.e., 83% biodegradability for 139 days); however, its biodegradation rate was relatively slow (6.1 mL CH₄/g-VS day) compared to that of cellulose (13.5 mL CH₄/g-VS day), which was used as a reference material. The PBS was barely degraded under anaerobic conditions, with only 2% biodegradability in 100 days. These results were consistent with the visual changes and FE-SEM images of the two biodegradable polymers after the landfill burial test, showing that only PCL-starch blend had various sized pinholes on the surface due to attack by microorganisms. This result may be use in deciding suitable final disposal approaches of different types of biodegradable polymers in the future.     

Degradation of poly(β-hydroxyalkanoates) and polyolefin blends in a municipal wastewater treatment facility

Six types of plastics and plastic blends, the latter composed at least partially of biodegradable material, were exposed to aerobically treated wastewater (activated sludge) to ascertain their biodegradability. In one study, duplicate samples of 6% starch in polypropylene, 12% starch in linear low-density polyethylene, 30% polycaprolactone in linear low-density polyethylene, and poly(-hydroxybutyrate-co-hydroxyvalerate) (PHB/V), a microbially produced polyester, were exposed to activated sludge for 5 months, and changes in mass, molecular weight average, and tensile properties were measured. None of the blended material showed any sign of degradation. PHB/V, however, showed a considerable loss of mass and a significant loss of tensile strength. In a second study, PHB/V degraded rapidly, but another type of microbial polymer which forms a thermoplastic elastomer, poly(-hydroxyoctanoate), did not degrade. These results illustrate the potential for disposal and degradation of PHB/V in municipal wastewater.     

Preparation and Characterization of Biodegradable Blend Membranes of PBS/CA

Asymmetric membranes of cellulose acetate/poly (butylene succinate) were prepared using immersion precipitation technique. The blended membranes were characterized by contact angle, scanning electron microscopy, thermogravimetric analysis, degradation test in compost and dynamic test of raisin wastewater treatment. Results demonstrated that hydrophilicity of cellulose acetate was enhanced by addition of poly (butylene succinate) up to 50 %. Furthermore, polymeric composition affects cross sectional structure of the membranes by controlling formation of macrovoids. Addition of poly (butylene succinate) improved the membranes thermal stability and obviously their degradation in compost. The prepared membranes were able to reject the wastewater pollutants properly.     

Isolation of a fungus from denitrifying activated sludge that degrades highly chlorinated dioxins

 This article reports the potential of denitrifying activated sludge to degrade highly chlorinated dioxins, especially from a (landfill) leacheate treatment plant in Japan, and the isolation from this denitrifying activated sludge of a microorganism able to degrade highly chlorinated dioxins. Using a 700-ml bioreactor, denitrifying activated sludge was cultivated under denitrifying conditions by adding 2.0 ng of a mixture of 4- to 8-chlorinated dioxins from fly ash. The dioxin contents of the sample, effluent, and medium before and after cultivation were measured by gas chromatography–mass spectrometry (GC–MS). After 7 days cultivation, about 90% of added dioxins were lost (average percentage of isomer depletion). A dioxin-degrading microorganism was isolated from the activated sludge. Lignin was added to the medium as a color indicator of aromatic compound degradation, and the lignin-decolorizing microorganisms in the denitrifying activated sludge were screened. Some strains were isolated, and one major isolated fungus, strain 622, decolorized lignin effectively. Strain 622 was identified as an Acremonium sp. from its morphological characteristics. It could decolorize lignin by 24% under paraffin-sealed anaerobic conditions. After the cultivation of strain 622 with a 2 ng/ml mixture of 4- to 8-chlorinated dioxins for 1 day, 82% (average for individual isomers) of the added 4- to 8-chlorinated dioxins had been degraded. Added octachlorodibenzo-p-dioxin (OCDD, 100 ng) was degraded under aerobic conditions after 8 h of incubation. During this process, heptachlorodibenzo-p-dioxin was produced and appeared to be a degradation product of OCDD. 1- or 2-hydroxydibenzo-p-dioxin from OCDD was also identified as the degradation product by GC–MS. These results indicated that OCDD was degraded to the nonchlorinated dibenzo-p-dioxins through dechlorination by Acremonium sp. strain 622. Received: October 12, 2001 / Accepted: March 11, 2002     

Effect of Poly(l-Lactide) and Poly(Butylene Succinate) on the Growth of Red Pepper and Tomato

Seeds of red pepper and tomato were sowed and cultivated in a soil blended with powdery poly(l-lactide) (PLLA), and poly(butylene succinate) (PBS). PBS depressed the growth of the two plants significantly even at a concentration as low as 5%, whereas PLLA up to 35% affected negligibly or even boosted the growth of the two plants. pH and number of microbial cells in the soil after 80 days of cultivation were almost the same independently whether the soil was blended with the two polymers or not. In contrast, the molecular weight of PBS decreased much faster than that of PLLA. Because succinic acid and 1,4-butane diol, from which PBS was synthesized, exhibited toxicity to both plant and animal cells to retard the germination rate of young radish seeds and to deform the morphology of HeLa cells significantly [1], the monomers and the oligomers produced from the PBS degradation should have a detrimental influence on the growth of the two plants.     

Electron Microscope Observation of Biodegradation of Polymers

Biodegradable polymers generally decompose in the various media in our environments. These environments contain soils, seawater, and activated sludge. If biodegradable materials waste is discarded, they decompose in these media. The biodegradation process of biodegradable polymers was investigated by scanning electron microscopy. Polycaprolactone, polybutylene succinate, and P(3HB-co-3HV) were tested. The shapes of holes on the decomposing surfaces are different according to the biodegradation media. Semispherical holes are observed on the surfaces of polybutylene succinate films degraded in activated sludge and cracks are observed on the surfaces of polycaprolactone films degraded in soil.     

Anaerobic treatment of sludge from a nitrification-denitrification landfill leachate plant

The viability of anaerobic digestion of sludge from a MSW landfill leachate treatment plant, with COD values ranging between 15,000 and 19,400mg O(2)dm(-3), in an upflow anaerobic sludge blanket reactor was studied. The reactor employed had a useful capacity of 9l, operating at mesophilic temperature. Start-up of the reactor was carried out in different steps, beginning with diluted sludge and progressively increasing the amount of sludge fed into the reactor. The study was carried out over a period of 7 months. Different amounts of methanol were added to the feed, ranging between 6.75 and 1cm(3)dm(-3) of feed in order to favour the growth of methanogenic flora. The achieved biodegradation of the sludge using an upflow anaerobic sludge blanket Reactor was very high for an HRT of 9 days, obtaining decreases in COD of 84-87% by the end of the process. Purging of the digested sludge represented approximately 16% of the volume of the treated sludge.     

Combining chemical sequential extractions with 3D fluorescence spectroscopy to characterize sludge organic matter

The design and management of anaerobic digestion of sewage sludge (SS) require a relevant characterisation of the sludge organic matter (OM). Methods currently used are time-consuming and often insufficiently informative. A new method combining chemical sequential extractions (CSE) with 3D fluorescence spectroscopy was developed to provide a relevant SS characterisation to assess both OM bioaccessibility and complexity which govern SS biodegradability. CSE fractionates the sludge OM into 5 compartments of decreasing accessibility. First applied on three SS samples with different OM stability, fractionation profiles obtained were in accordance with the latter. 3D fluorescence spectroscopy revealed that the bioaccessible compartments were mainly constituted of simple and easily biodegradable OM while the unaccessible ones were largely made of complex and refractory OM. Then, primary, secondary and anaerobically digested sludge with different biodegradabilities were tested. Complexity revealed by 3D fluorescence spectroscopy was linked with biodegradability and chemical accessibility was correlated with sludge bioaccessibility.     

Enzymatic degradation of poly([R,S] β-hydroxybutyrate)

The synthetic analogue of a bacterially produced polyester, poly(-hydroxybutyrate) (PHB) was synthesized from racemic -butyrolactone using anin situ trimethyl aluminum-water catalyst. The polymer was fractionated into samples differing in molecular weight and isotactic diad content. The latter was closely related to degree of crystallinity. The biodegradation of these fractions were examined by monitoring mass loss over time in the presence of anAlcaligenes faecalis T1 extracellular bacterial poly(-hydroxybutyrate) depolymerase. The fraction with high isotactic diad tacticity content showed little or no degradation over a 50 hour incubation period, whereas the fraction of intermediate isotactic diad content degraded in a continuous steady fashion at a rate that was less than that for bacterial PHB. The low isotactic diad fraction underwent a rapid initial degradation, followed by no further mass loss. The presence of stereoblocks in the polymer structure of the various fractions was an influence on the degree of susceptibility towards degradation and is related to sample crystallinity.     

In Vitro Biodegradation of Polyester-Based Plastic Materials by Selected Bacterial Cultures

A simple and rapid in vitro test was designed for the assessment of the biodegradation of polyester-based plastics by selected biodegrading bacterial strains. Variovorax paradoxus LMG 16137 was used for the degradation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Acidovorax avenae subsp. avenae LMG 17238 fo the synthetic-based polyesters poly(-caprolactone) (PCL), poly(butylene succinate-co-butylene adipate), and a starch-PCL blend. Degradation by the bacteria was studied in liquid medium with the plastics (films, granules, and injection-molded test bars) as sole sources of carbon. Degradation was followed through gravimetry, growth of the culture, and tensile testing. The effects of incubation time, inoculum density, aeration, incubation temperature, and pH of the medium on the mass loss were investigated and conditions optimized. The test allowed to obtain reproducible results on the mass loss of plastic samples in less than 3 weeks and yielded excellent partially degraded samples for further analysis.     

Degradation of poly(3-hydroxybutyrate), PHB,by bacteria and purification of a novel PHB depolymerase fromComamonas sp.

Bacteria capable of growing on poly(3-hydroxybutyrate), PHB, as the sole source of carbon and energy were isolated from various soils, lake water, activated sludge, and air. Although all bacteria utilized a wide variety of monomeric substrates for growth, most of the strains were restricted to degrade PHB and copolymers of 3-hydroxybutyrate and 3-hydroxyvalerate, P(3HB-co-3HV). Five strains were also able to decompose a homopolymer of 3-hydroxyvalerate, PHV. Poly(3-hydroxyoctanoate), PHO, was not degraded by any of the isolates. One strain, which was identified asComamonas sp., was selected, and the extracellular depolymerase of this strain was purified from the medium by ammonium sulfate precipitation and by chromatography on DEAE-Sephacel and Butyl-Sepharose 4B. The purified PHB depolymerase was not a glycoprotein. The relative molecular masses of the native enzyme and of the subunits were 45,000 or 44,000, respectively. The purified enzyme hydrolyzed PHB, P(3HB-co-3HV), and—at a very low rate—also PHV. Polyhydroxyalkanoates, PHA, with six or more carbon atoms per monomer or characteristic substrates for lipases were not hydrolyzed. In contrast to the PHB depolymerases ofPseudomonas lemoignei andAlcaligenes faecalis T₁, which are sensitive toward phenylmethylsulfonyl fluoride (PMSF) and which hydrolyze PHB mainly to the dimeric and trimeric esters of 3-hydroxybutyrate, the depolymerase ofComamonas sp. was insensitive toward PMSF and hydrolyzed PHB to monomeric 3-hydroxybutyrate indicating a different mechanism of PHB hydrolysis. Furthermore, the pH optimum of the reaction catalyzed by the depolymerase ofComamonas sp. was in the alkaline range at 9.4.     

Microscopic Visualization of the Enzymatic Degradation of Poly(3HB-co-3HV) and Poly(3HV) Single Crystals by PHA Depolymerases From Pseudomonas lemoignei

As a complement to previous studies of the enzymatic degradation of folded chain lamellar single crystals of polyhydroxyalkanoates, single crystals of a number of polyhydroxyalkanoates were partially degraded with depolymerases from Pseudomonas lemoignei and examined by transmission electron microscopy. Single crystals of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate), bacterial poly(3-hydroxyvalerate), and synthetic poly(3-hydroxybutyrate) with 88% isotactic diads were degraded using purified extracellular PHA-depolymerases from P. lemoignei: PHB-depolymerase A, PHB-depolymerase B, and depolymerases from recombinant E. coli: PHB-depolymerase PhaZ4 (PHB-depolymerase E), PHB-depolymerase PhaZl (PHB-depolymerase C), and PHB-depolymerase PhaZ5 (PHB-depolymerase A). In contrast to previous results with single crystals of bacterial PHB, the predominant effect observed with all crystals was a significant narrowing of the lamellae. This suggests an edge attack mechanism which because of lateral disorder of the crystals leads to a narrowing of the crystalline lamellae as opposed to the splintering effect previously observed. The model suggested for the degradation of single crystals of bacterial PHB by PHB-depolymerases is refined to include the effects of lateral disorder caused by the introduction of valerate or repeat units of opposite stereochemistry into the single crystal.     

Polyhydroxybutyrate Accumulation in Bacillus megaterium and Optimization of Process Parameters Using Response Surface Methodology

The accumulation of polyhydroxybutyrate of Bacillus megaterium is growth associated and significantly dependent on carbon sources. In the present investigation B. megaterium strain isolated from soil was studied for PHB production in fructose minimal media. The PHB production was found to be growth associated. The polymer production by the strain was found to vary from 24 to 48 % content (w/w) of the dry cell weight. Box Bohn design was used to study the interactive effect of four variables on cell growth and PHB production. The optimized medium conditions with the constrain to maximize cell growth and PHB content were glucose 4.32 g/L, Mannitol 4.52 g/L and Na succinate 3.45 g/L and PHB yield 1.38 g/L amounting to 49 % of dry cell weight which is more than 1.8 folds the basal medium. The polymer production by the strain was found to vary from 12.18 to 57.2 % content (w/w) of the dry cell weight.     

Confirmation of colonization of degrading bacterium strain SC-17 on poly(3-hydroxybutyrate) cast film

To clarify the mechanism of microbial degradation owing to colonization ofPseudomonas sp. strain SC-17 on a poly(3-hydroxybutyrate) (PHB) cast film surface, morphological and spectroscopic analyses of the degraded film were investigated and colonization kinetics on the films is discussed. By spectroscopic analysis of unique hemispherical degradation marks, cells of strain SC-17 adhering to the marks' surface were confirmed. To account for the hemispherical hole formation and their linear enlargement with culture time, a three-dimensional colony growth model toward the interior of the film was developed. The model explained the hemispherical hole formation well. It was concluded that the hemispherical holes resulted from the colonization of strain SC-17 on the film surfaces. It was further determined that the microbial degradation by strain SC-17 is initiated from small pits formed on the PHB film surface.     

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in compost

The microbial degradation of tensile test pieces made of poly(3-hydroxybutyrate) [P(3HB)] or copolymers with 10% [P(3HB-co-10%3HV)] and 20% [P(3HB-co-20%3HV)] 3-hydroxyvaleric acid was studied in small household compost heaps. Degradation was measured through loss of weight (surface erosion) and changes in molecular weight and mechanical strength. It was concluded, on the basis of weight loss and loss of mechanical properties, that P(3HB) and P(3HB-co-3HV) plastics were degraded in compost by the action of microorganisms. No decrease inM _w could be detected during the degradation process. The P(3HB-co-20%3HV) copolymer was degraded much faster than the homopolymer and P(3HB-co-10%3HV). One hundred nine microbial strains capable of degrading the polymersin vitro were isolated from the samples used in the biodegradation studies, as well as from two other composts, and identified. They consisted of 61 Gram-negative bacteria (e.g.,Acidovorax facilis), 10 Gram-positive bacteria (mainlyBacillus megaterium), 35Streptomyces strains, and 3 molds.     

Biodegradation of Injection Molded Starch-Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) Blends in a Natural Compost Environment

Injection molded specimens were prepared by blending poly (hydroxybutyrate-co-valerate) (PHBV) with cornstarch. Blended formulations incorporated 30% or 50% starch in the presence or absence of poly-(ethylene oxide) (PEO), which enhances the adherence of starch granules to PHBV. These formulations were evaluated for their biodegradability in natural compost by measuring changes in physical and chemical properties over a period of 125 days. The degradation of plastic material, as evidenced by weight loss and deterioration in tensile properties, correlated with the amount of starch present in the blends (neat PHBV < 30% starch < 50% starch). Incorporation of PEO into starch-PHBV blends had little or no effect on the rate of weight loss. Starch in blends degraded faster than PHBV and it accelerated PHBV degradation. Also, PHBV did not retard starch degradation. After 125 days of exposure to compost, neat PHBV lost 7% of its weight (0.056% weight loss/day), while the PHBV component of a 50% starch blend lost 41% of its weight (0.328% weight loss/day). PHB and PHV moieties within the copolymer degraded at similar rates, regardless of the presence of starch, as determined by ¹H-NMR spectroscopy. GPC analyses revealed that, while the number average molecular weight (Mn) of PHBV in all exposed samples decreased, there was no significant difference in this decrease between neat PHBV as opposed to PHBV blended with starch. SEM showed homogeneously distributed starch granules embedded in a PHBV matrix, typical of a filler material. Starch granules were rapidly depleted during exposure to compost, increasing the surface area of the PHBV matrix.     

Extracting humic acids from digested sludge by alkaline treatment and ultrafiltration

The concentration of hardly biodegradable humic substances in sludge would relatively increase after anaerobic digestion due to the degradation of other organic substances. Thus, extracting humic substances from digested sludge as a liquid organic fertilizer was tested using alkaline treatment and ultrafiltration, and the dewaterability of the residual sludge was also tested. The results showed that the contents of humic acids and fulvic acids in digested sludge were 16.4 mg/g total solids and 88.9 mg/g total solids, respectively, and most of the humic acids had a molecular weight higher than 50 kDa. Hence, the membrane with a molecular weight cut-off of 50 kDa was used for humic acids recovery from the centrifugation supernatant after alkaline sludge disintegration with an optimum NaOH dose of 0.1 mol/L. Under these conditions, the total concentration of humic acids and fulvic acids was 4239 mg/L in the retention solution, which can be further concentrated and processed for liquid fertilizer. The total recovery rate of sludge humic acids and fulvic acids was about 25 %. The dewatering performance of the residual sludge was better than that of the untreated sludge when the residual sludge was diluted to a water content of 95–98 % and then conditioned with polyacrylamide at a dose of 10–30 mg/L.     

Block Copolymers Containing (R)-3-Hydroxybutyrate and Isosorbide Succinate or (S)-Lactic Acid Mers

A new aliphatic block copolyester was synthesized in bulk from transesterification techniques between poly((R)-3-hydroxybutyrate) (PHB) and poly(isosorbide succinate) (PIS). Additionally, other two block copolyesters were synthesized in bulk either from transesterification reactions involving PHB and poly(l-lactide) (PLLA) or from ring-opening copolymerization of l-lactide and hydroxyl-terminated PHB, as result of a previous transesterification reactions with isosorbide. Two-component blends of PHB and PIS or PLLA were also prepared as comparative systems. SEC, MALDI-TOF mass spectrometry (MALDI-TOFMS), ¹H and ¹³C NMR spectroscopy, WAXD, solubility tests, and TG thermal analysis were used for characterization. The block copolymer structures of the products were evidenced by MALDI-TOFMS, ¹³C NMR, and WAXD data. The block copolymers and the corresponding binary blends presented different solubility properties, as revealed by solubility tests. Although the incorporation of PIS sequences into PHB main backbone did not enhance the thermal stability of the product, it reduced its crystallinity, which could be advantageous for faster biodegradation rate. These products, composed of PHB and PIS or PLLA sequences, are an interesting alternative in biomedical applications.