Cost-effective monitoring for a soil vapor extraction (SVE) system: a simplified modeling and gas sensor test

In order to establish cost-effective monitoring strategies for soil vapor extraction (SVE), a simplified model for multi-component mass transfer of a complex liquid mixture in porous media and gas sensor are proposed and experimentally evaluated. The basic task for the cost-effective monitoring of SVE is to decide how to predict the performances of venting systems in terms of the contaminant vapor removal rate and the time required to accomplish the clean-up specification. The method includes classifying of individual components of a complex mixture on the basis of gas chromatographic (GC) profile and treating each resulting group as a pseudo-single compound. BTEX components of gasoline were selected for model input and the remainders were divided into 4 groups based on their GC retention times. The model proposed in this study is capable of predicting with accuracy volatilization behaviors of gasoline components in soil and the gas sensor (FIGARO TGS 823) was tested by GC-FID to toluene and TPH-GRO(Total Petroleum Hydrocarbon-Gasoline Range Organics) gas samples. A VOC gas sensor was developed which recognizes TPH-GRO concentrations between 250 and 50 ppm. The developed gas sensor test and proposed model can be used as a valuable tool for the cost-effective monitoring for SVE systems.     

Seasonal variation, risk assessment and source estimation of PM 10 and PM10-bound PAHs in the ambient air of Chiang Mai and Lamphun, Thailand

Daily PM10 concentrations were measured at four sampling stations located in Chiang Mai and Lamphun provinces, Thailand. The sampling scheme was conducted during June 2005 to June 2006; every 3 days for 24 h in each sampling period. The result revealed that all stations shared the same pattern, in which the PM10 (particulate matters with diameter of less than 10 microm) concentration increased at the beginning of dry season (December) and reached its peak in March before decreasing by the end of April. The maximum PM10 concentration for each sampling station was in the range of 140-182 microg/m(3) which was 1.1-1.5 times higher than the Thai ambient air quality standard of 120 microg/m(3). This distinctly high concentration of PM10 in the dry season (Dec. 05-Mar. 06) was recognized as a unique seasonal pattern for the northern part of Thailand. PM10 concentration had a medium level of negative correlation (r = -0.696 to -0.635) with the visibility data. Comparing the maximum PM10 concentration detected at each sampling station to the permitted PM10 level of the national air quality standard, the warning visibility values for the PM10 pollution-watch system were determined as 10 km for Chiang Mai Province and 5 km for Lamphun Province. From the analysis of PM10 constituents, no component exceeded the national air quality standard. The total concentrations of PM10-bond polycyclic aromatic hydrocarbons (PAHs) are calculated in terms of total toxicity equivalent concentrations (TTECs) using the toxicity equivalent factors (TEFs) method. TTECs in Chiang Mai and Lamphun ambient air was found at a level comparable to those observed in Nagasaki, Bangkok and Rome and at a lower level than those reported at Copenhagen. The annual number of lung cancer cases for Chiang Mai and Lamphun Provinces was estimated at two cases/year which was lower than the number of cases in Bangkok (27 cases/year). The principal component analysis/absolute principal component scores (PCA/APCS) model and multiple regression analysis were applied to the PM10 and its constituents data. The results pointed to the vegetative burning as the largest PM10 contributor in Chiang Mai and Lamphun ambient air. Vegetative burning, natural gas burning & coke ovens, and secondary particle accounted for 46-82%, 12-49%, and 3-19% of the PM10 concentrations, respectively. However, natural gas burning & coke ovens as well as vehicle exhaust also deserved careful attention due to their large contributions to PAHs concentration. In the wet season and transition periods, 42-60% of the total PAHs concentrations originated from vehicle exhaust while 16-37% and 14-38% of them were apportioned to natural gas burning & coke ovens and vegetative burning, respectively. In the dry period, natural gas burning & coke ovens, vehicle exhaust, and vegetative burning accounted for 47-59%, 20-25%, and 19-28% of total PAHs concentrations. The close agreement between the measured and predicted concentrations data (R(2) > 0.8) assured enough capability of PCA/APCS receptor model to be used for the PM10 and PAHs source apportionment.     

铵盐气溶胶对烟气排放连续监测系统颗粒物比对监测的影响研究

利用拉曼光谱对采样后的滤筒进行分析,发现废气中的硫酸铵-硫酸氢铵气溶胶是造成成都市部分企业烟气排放连续监测系统(CEMS)颗粒物比对监测结果不合格的主要原因。通过比较分析得出:在对含硫酸铵-硫酸氢铵气溶胶废气进行颗粒物浓度比对监测时,参比方法(重量法)测定的颗粒物浓度是一定标干采样体积下废气中固体微粒和硫酸铵-硫酸氢铵液体微粒结晶后产生的晶体的总质量,基于光散射法的CEMS颗粒物浓度测试系统测定的颗粒物浓度只是一定标干采样体积下废气中固体微粒的质量,由此导致参比方法测出的颗粒物浓度远大于CEMS测出的浓度,造成比对误差远超出允许值范围。     

工业温室气体CO2排放监测技术前期研究

介绍了国内外二氧化碳（ CO2）气体检测方法,选取红外传感器、非分散红外和气相色谱3种方法监测工业燃煤废气中的CO2。试验结果表明,3种方法的精密度和准确度均满足要求;单一燃煤废气中CO2的体积分数范围为6．70％～15．10％,同一排气筒中CO2体积分数5 min的波动范围为0～22．4％;同一排气筒（单一燃煤废气）中CO2和O2的体积分数有一定的关联性,二者之和基本稳定在19％～21％范围;非分散红外法和气相色谱法测定同一样品的相对偏差为0．9％～3．4％;红外传感器适用于有组织排放的现场监测,另2种方法适用于无组织废气和环境空气监测。     

固定污染源废气监测用挥发性卤代烃标准气体制备不确定度研究

针对固定污染源挥发性卤代烃污染物的排放监测需求,采用称量法制备固定污染源废气监测用挥发性卤代烃标准气体(各组分具有浓度差异),并开展制备不确定度评定研究。通过分析原料试剂纯度、液态/气态组分称量、混合液配比、摩尔质量、气体残留等因素和环节引入的不确定度,确立标准气体制备不确定度评定流程。最终,确定固定污染源废气监测用挥发性卤代烃标准气体制备过程引入的相对扩展不确定度(k=2)小于1%。液态/气态组分称量和上一级中间气浓度引入的不确定度对特性量值不确定度的贡献较大,原料试剂纯度对不确定度的影响较小,摩尔质量和气体残留对不确定度的影响可忽略。     

Mercury and other elements in lichens near the INA Naftaplin gas treatment plant, Molve, Croatia

This paper describes the use of epiphytic lichens as bioindicators for spatial monitoring of mercury and other elements in air near the natural gas treatment facilities at Molve, Croatia. It is well known that at this location the concentration of mercury in natural gas is very high and therefore it has to be removed from natural gas before further processing in order to prevent technological and environmental problems. In order to monitor the efficiency of an industrial facility for removal of mercury from natural gas, mercury measurements in air and lichens were performed during 9 months in 1997/1998. In situ lichens Parmelia sulcata, Xantoria parientina and Hypogymnia physodes and transplanted lichen species Hypogymnia physodes were used. A good correlation between mercury concentrations in air and lichens was found. The concentrations of barium and bromium were also significantly elevated in transplanted lichens, most probably related to technological process at the gas treatment plant and/or other geological factors. It was confirmed that lichens can successfully be used as bioindicators, provided a careful experiment is designed, particularly the amount of lichens transplanted, the duration of exposure and the initial levels and homogeneity of transplanted lichens.     

Monitoring of cyclic organochlorines in the marine environment

Cyclic organochlorines are highly hydrophobic chemicals which usually possess a high persistence to microbial breakdown. These behavioural aspects determine the suitability of each environmental compartment for monitoring purposes, which is discussed.It is concluded, that monitoring of (cyclic) organochlorines should only be executed for compounds about which solid information is available on their environmental behaviour in abiotic and biotic environmental compartments. Under these conditions benthic invertebrates which use glycogen as their main energy-depot, appear to be the most suitable tool for environmental monitoring of lipophilic compounds. Concentrations should be expressed on the basis of (total) extractable lipids.The organisms to be compared should be sampled at a time when they have a similar physiological condition. This does not automatically mean synoptic sampling.Multi-component mixtures, such as PCB's, should be monitored on the basis of (selected) individual components in order to account for differences in behaviour of each component between different environmental compartments and animal species.Some representatives of the compounds discussed are strong inducers of mixed function oxygenase (MFO) enzyme systems. Therefore it should be investigated, if monitoring of MFO activity in addition to concentrations can be regarded as an early warning system of additive effects.     

环境在线监测监控管理与发布系统

阐述了省级环境在线监测监控管理与发布系统的组成及功能特点,介绍了采用GPRS无线数据传输方式,对水、气、污染源等环境在线监测自动化系统进行数据采集、统计与GIS发布的实现方式,指出其具有传输速率高、延时小、实时性强、建设方便、费用低廉等显著优点。     

Biocomplementation of SVE to achieve clean-up goals in soils contaminated with toluene and xylene

Soil vapor extraction (SVE) and bioremediation (BR) are two of the most common soil remediation technologies. Their application is widespread; however, both present limitations, namely related to the efficiencies of SVE on organic soils and to the remediation times of some BR processes. This work aimed to study the combination of these two technologies in order to verify the achievement of the legal clean-up goals in soil remediation projects involving seven different simulated soils separately contaminated with toluene and xylene. The remediations consisted of the application of SVE followed by biostimulation. The results show that the combination of these two technologies is effective and manages to achieve the clean-up goals imposed by the Spanish Legislation. Under the experimental conditions used in this work, SVE is sufficient for the remediation of soils, contaminated separately with toluene and xylene, with organic matter contents (OMC) below 4 %. In soils with higher OMC, the use of BR, as a complementary technology, and when the concentration of contaminant in the gas phase of the soil reaches values near 1 mg/L, allows the achievement of the clean-up goals. The OMC was a key parameter because it hindered SVE due to adsorption phenomena but enhanced the BR process because it acted as a microorganism and nutrient source.     

烟尘烟气监测全程序质量监督评价方法研究

建立了烟尘、烟气监测全程序质量监督体系,确定了监督检查工作需要控制的环节,并细化了各环节需要重点关注的内容。以层次分析法等关键技术为基础,通过赋予监测全过程各环节不同的指标权重,建立了统一化、标准化的综合评价模式。研究将评价体系分为2个层次,一级指标3个,二级指标19个,并确定了每个指标的测评内容及计算方法。将该体系应用于6家监测机构的质量监督工作,证明其实用性和适用性良好。     

铬盐工业项目特征污染物的监测与数据问题分析

对铬及其化合物工业项目排放废气中特征污染物的监测方法和评价标准问题进行探讨,提出了验收监测应参考《大气污染物综合排放标准》(GB 16297—1996)的建议;通过对监测数据的合理性和逻辑性分析,提出了现场监测和数据审核的注意事项,应严格监控工况,并详细记录关键设备运行参数;提出应把废气中六价铬作为特征污染物控制指标,并结合新颁布的《环境空气质量标准》(GB 3095—2012)中对六价铬的要求,确定合理的排放限值,并研究适合的配套监测方法,为后续铬及其化合物工业污染物排放标准以及特征污染物监测方法的制修订提供技术依据。     

电镀企业竣工环保验收监测及后续监管中存在问题探讨

结合电镀企业竣工环保验收监测工作实践,对单位产品基准排水量和排气量的计算和评价,电镀标准中对污染物处理设施排气量的规定,第一类污染物在不同采样点评价标准的选择,重金属排放总量计算以及后续电镀企业废水、废气、污泥监管中存在的问题进行了探讨,并提出了相应的建议。     

GPRS烟气在线监控系统的设计

阐述了采用完全抽取方式的GPRS烟气在线监控系统的功能和构成。该系统从功能上分为烟气信息监测监控收集子系统、烟气信息加工及处理子系统和环境管理决策支持及信息发布子系统,结构上分为监测点和监控中心两部分。监控中心包括省级监控中心和市级监控中心,监测点包括仪器分析单元、控制单元和通讯系统。指出基于中国移动GPRS／GSM的烟气数据监控系统具有建设使用成本低、监测监控范围大、积木化结构、技术先进和数据并行收取等特点,具有广阔的应用前景。     

The evaluation of a low resolution fourier transform infrared (FTIR) gas analyser for monitoring of solvent emission rates under field conditions

The applicability of a low resolution (8 cm-1) Fourier transform infrared (FTIR) gas analyser with an absorption path length of 3 m was evaluated for the on-line monitoring of organic solvent mixture emissions in a flexographic ink manufacturing plant. The on-line monitoring revealed that the highest variations of solvent concentrations, up to three decades, occurred in the exhaust air. The FTIR analyser with a dynamic range of four decades covers well the concentration ranges typically found in the exhaust air and in the workroom air of ink manufacturing plants. The average emission rate of solvent mixture based on a sampling period of two days was 1.8 kg h-1 consisting of mainly ethanol (70%), ethyl acetate (15%) and propan-2-ol (11%). The detection limits of the analyser for the solvent compounds ranged from 0.3 to 4.3 mg m-3 and the measurement uncertainty was less than 10% in the concentration range of 8-15,000 mg m-3. These characteristics make the apparatus appropriate for most industrial hygiene applications. An FTIR spectrophotometer, equipped with an multipoint sampling unit, facilitates rapid identification of solvent components, real-time display of concentration data relevant to workroom air and environment monitoring as well as process control. Furthermore, the on-line concentration information enabled a rapid selection of representative sampling locations. The spectrophotometer is transportable, rugged and relatively simple to calibrate even in a hostile industrial environment.     

燃煤电厂烟气排放过程监控系统设计与应用

介绍了燃煤电厂烟气排放过程（工况）监控系统的架构,排放过程监控子系统、参数监测子系统和数据采集传输子系统的实现方式,过程监控采集参数选择方法,模型建立步骤与验证方法。结合实际应用,分析如何判定脱硫设施运转正常,烟气参数监测是否正确,并提出了做好过程监控系统工作的相关建议。     

上海浦东国际机场飞机尾气排放对机场附近空气质量的影响

统计2012年10月和11月浦东机场飞机机型和航班架次,根据各类飞机起降的污染物排放设计工作参数,估算出2012年浦东机场飞机起降时排放的NO2、SO2、CO和HC的估算值。利用浦东新区13个空气监测子站二氧化氮和二氧化硫数据绘制等值线图。结果显示,机场所在的江镇点位和祝桥点位二氧化氮浓度变化受飞机影响很大,而飞机排放的二氧化硫对两个点位的影响可以忽略不计。建议采用改进飞机滑行路线、探讨征收飞机碳排放税等措施减少飞机尾气排放对空气质量的影响。     

浅析国控废气污染源在线比对监测存在的问题及对策——以镇江市为例

以镇江市国控废气污染源在线比对监测为例,分析了国控废气污染源比对监测存在的典型问题,从监测规范、比对方法、运维管理等角度剖析原因,提出,合理设置手工与在线监测点位,减少比对监测方法干扰因素,加强在线监测仪器维护监督管理等建议,从而提高比对监测合格率,更好地开展国控污染源在线比对监测工作。     

定型机油烟废气监测分析方法初探

定型机废气污染是当前环境投诉的热点之一,油烟污染是定型机废气的主要问题,我国尚无定型机废气监测分析的标准方法。本文参照《餐饮业油烟排放标准》（试行）（GB 18483-2001）中的方法,比较了餐饮业油烟废气和定型机油烟废气在成分、排放方式等方面的相同点和不同点,从采样方法、采样时间等对定型机油烟废气的监测分析进行了初探,确定了定型机油烟废气竣工验收参考的采样方法和时间等要素。     

Organic carbon causes interference with nitrate and nitrite measurements by UV/Vis spectrometers: the importance of local calibration

Compared with sporadic conventional water sampling, continuous water-quality monitoring with optical sensors has improved our understanding of freshwater dynamics. The basic principle in photometric measurements is the incident light at a given wavelength that is either reflected, scattered, or transmitted in the body of water. Here, we discuss the transmittance measurements. The amount of transmittance is inversely proportional to the concentration of the substance measured. However, the transmittance is subject to interference, because it can be affected by factors other than the substance targeted in the water. In this study, interference with the UV/Vis sensor nitrate plus nitrite measurements caused by organic carbon was evaluated. Total or dissolved organic carbon as well as nitrate plus nitrite concentrations were measured in various boreal waters with two UV/Vis sensors (5-mm and 35-mm pathlengths), using conventional laboratory analysis results as references. Organic carbon increased the sensor nitrate plus nitrite results, not only in waters with high organic carbon concentrations, but also at the lower concentrations (< 10 mg C L^?1) typical of boreal stream, river, and lake waters. Our results demonstrated that local calibration with multiple linear regression, including both nitrate plus nitrite and dissolved organic carbon, can correct the error caused by organic carbon. However, high-frequency optical sensors continue to be excellent tools for environmental monitoring when they are properly calibrated for the local water matrix.     

Polybrominated diphenyl ethers (PBDEs) and 2,2′,4,4′,5,5′-hexabromobiphenyl (BB-153) in landfill leachate in Cape Town, South Africa

An assessment of the concentrations of selected polybrominated diphenyl ether (PBDE) congeners as well as BB 153 in leachate samples collected from three landfill sites within the city of Cape Town was conducted. A liquid–liquid extraction technique was employed for the isolation of all the target compounds from the leachate samples. Extracts obtained were further subjected to multi-layer column chromatography employing different forms of silica gel. The prepared samples were analysed using a high capillary gas chromatograph equipped with a micro-electron capture detector (GC-μECD). The overall mean concentrations of the total PBDEs, including BDE 209 ranged between 5.65 and 2,240, 0.28–20.5 and 1.66–1,170 ng/l for Bellville, Coastal Park, and Vissershok landfill sites, respectively. The mean concentrations of BB 153, which were generally low in most of the samples analysed, were 70.4, 7.14 and 8.16 ng/l for Bellville, Coastal Park and Vissershok sites, respectively. The influence of precipitation on the characteristics and quantity of leachate produced from the landfill sites investigated was most pronounced during the August/September sampling regime. Generally, the trend observed in this study clearly indicated a wide variation in the levels of these contaminants in all the landfill sites studied from one sampling period to the other. However, the principal component analysis revealed that the release of these contaminants might be associated with two or three possible sources. This study further confirmed the relevance of landfill leachate as an important source of PBDE contamination of the environment, especially the groundwater and surface water sources.