Facile Green Preparation of Lignocellulosic Biosorbent from Lemongrass Leaf for Cationic Dye Adsorption

Journal of Polymers and the Environment - Lignocellulosic biosorbents for wastewater treatment are generally powders. However, powdered biosorbents require the time and energy taken up in grinding...     

Effective Removal of Dyes from Aqueous Solutions by a Gelatin Hydrogel

Journal of Polymers and the Environment - Adsorptive removal of dyes from industrial wastewater has attracted intensive interests in recent years. Hydrogels is a kind of promising adsorbent in dyes...     

阳离子嫩黄染料与苯酚在活性炭上竞争吸附的研究

用阳离子嫩黄染料和苯酚作为分子量差异悬殊的两种机吸附质，研究它们在两种国产活性炭上的吸附性能。在双组分竞争吸附中，阳离子嫩黄染吸附占明显优势，而 酚的吸附量则比在单组分系统时要小。本文还用理想吸附溶液（ＩＡＳ）模型对双组分竞争吸附作了预测。     

Adsorption Efficiency of Polyaspartate-Montmorillonite Composite Towards the Removal of Pb(II) and Cd(II) from Aqueous Solution

The selective modification of sodium montmorillonite (Na⁺-Mt) surface with polyionene followed by poly (succinimde-co-aspartate) has been considered. Na⁺-Mt was allowed to react with well characterized polyionene in two fold excess. The resulting polyionene/Mt (IC) was further modified with poly (succinimide-co-aspartate) through an ion exchange process. The obtained polyaspartate/Mt (IPS) composite was characterized by elemental analysis, X-ray diffraction, FTIR spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and BET surface analyzer. The adsorption efficiency of IPS composite was investigated for the removal of Pb(II) and Cd(II) from aqueous solution under different experimental conditions including initial metal ions concentration, temperature and single and binary mixture systems of metal ions. The experimental data were analyzed by Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models. Langmuir model reveals that the monolayer adsorption capacity of IPS was 92.59 and 67.57 mg/g for Pb(II) and Cd(II), respectively. The modification of parent Na⁺-Mt enhanced their adsorption capacity by about 87.91 and 29.84% for Pb(II) and Cd(II), respectively, due to inclusion of extra active sites of polyaspartate. The mean sorption energy, E calculated from Dubinin–Radushkevich isotherm were 2.75 and 1.98 kJ/mol for the adsorption of Pb(II) and Cd(II), respectively, indicating physical adsorption process. Also, The thermodynamic parameters were calculated and indicated that the adsorption was spontaneous and exothermic process. The mechanism of cation exchange and complexation of metal ions was suggested. IPS composite has a considerable potential for the removal of heavy metal ions from aqueous solution and wastewater stream.     

Facile Preparation of Chitosan Films for High Performance Removal of Reactive Blue 19 Dye from Aqueous Solution

This study aimed at finding effective strategies for high-performance removal of reactive blue 19 (RB19) dye from aqueous solution. Chitosan (CS) films had been prepared by using solvent casting with mild drying for this purpose. The CS films were characterized by X-ray diffraction, field-emission scanning electron microscopy, and Fourier transform infrared (FTIR) spectroscopy. The performance of RB19 removal using CS were evaluated by varying contact time, solution pH, initial dye concentration, and adsorbent dosage. Adsorption isotherms, kinetics, and desorption were investigated by batch experiments. Results showed that CS films exhibited the optimal adsorption performance for RB19 removal and high maximum adsorption capacities of RB19, which were 799 and 822.4 mg g^?1 at 20 and 40 °C, respectively. Adsorption kinetic data were well described by the pseudo-second-order kinetic model. FTIR analyses further indicated that interactions between RB19 and the CS film occurred during adsorption. The CS films also exhibited satisfactory desorption of RB19 at about 80 % after 30 min of desorption at pH 11. Our study demonstrated that the CS films can be easily prepared and applied for effective removal of RB19 in treatment of wastewater.     

Modified Sugarcane Bagasse with Tartaric Acid for Removal of Diazonium Blue from Aqueous Solutions

The present study concerns with exploring the possibility of using of tartaric acid pretreated sugarcane bagasse (SCB) for removing diazonium blue (DB) from aqueous solutions. The effect of different factors on the efficiency of the adsorbent for the DB dye removal was investigated, including initial dye concentration, contact time, SCB dosage and SCB particle size. Langmuir, Freundlich, Tempkin and D–R isothermal models have been employed to analyze the adsorption equilibrium data. It was found that the adsorption of the dye fits well with the D–R model. The adsorption kinetics was also done applying four kinetic models. The regression equation coefficients refer to fitting the data to the second-order kinetic equation for removal of the DB dye. It is probable that the rate limiting step is a chemical adsorption between the adsorbent and the dye. This chemisorption process is further confirmed from the energy value of 15.1 kJ mol^?1 deduced from the D–R isotherm.     

树脂吸附法去除水及空气中的CS2

采用XDA-1树脂吸附固定床工艺，对CS2饱和水溶液和含CS2的空气分别进行了动态吸附性能和影响因素的研究。在室温、CS2饱和水溶液流速为40BV／h（BV为树脂床体积）、中性或弱酸性的条件下，XDA—1树脂对水中饱和CS2的吸附效率达98．1％，对CS2的吸附量可达54．0g／L。在室温和气体流速为600BV／h的条件下，XDA-1树脂对空气中CS2的吸附效率为63．9％-90．0％，对CS2的吸附量可达28．0～36．8g／L。采用水蒸气解吸和冰水冷凝可以回收84．9％-90．0％的CS2。     

Insights into Effective Adsorption of Lead ions from Aqueous Solutions by Using Chitosan-Bentonite Composite Beads

Journal of Polymers and the Environment - The chitosan (Ch)—bentonite (B) composite was synthesized and its adsorption properties were investigated for lead ions. The characterization of the...     

Removal of Methylene Blue Dye from Aqueous Solution using PDADMAC Modified ZSM-5 Zeolite as a Novel Adsorbent

Journal of Polymers and the Environment - In the present work, we modified ZSM-5 zeolite using a bio polymer poly (diallyl dimethyl ammonium chloride) and employed it for the removal of cationic...     

Simultaneous Removal of Cationic and Anionic Dyes from Binary Solutions Using Carboxymethyl Chitosan Based IPN Type Resin

Journal of Polymers and the Environment - In this study, a novel bead form IPN type resin comprising poly (2-Dimethylaminoethyl) methacrylate and carboxymethyl chitosan networks with a high dye...     

响应面法优化烧烤竹炭对水中磷的吸附条件

采用响应面法优化烧烤竹炭(BBC)对水中磷的吸附条件。用Box-Behnken Design实验设计考察初始磷质量浓度、BBC粒径、BBC加人量和初始溶液pH等因素对磷去除率的影响。实验结果表明:各因素对磷去除率影响的大小顺序依次为初始溶液pHBBC粒径初始磷质量浓度BBC加入量;BBC吸附水中磷的最佳反应条件为初始磷质量浓度26.81 mg/L,BBC粒径0.15 mm,BBC加入量10.6 g/L,初始溶液pH 4.42;在最佳反应条件下,BBC对磷的去除率达90.04%。     

Converting Waste Polystyrene into Adsorbent: Potential Use in the Removal of Lead and Cadmium Ions from Aqueous Solution

Waste of polystyrene was converted into a cation exchange resin and was used for the removal of lead and cadmium metals from aqueous solution. Wastes consisting of coffee cups were crushed into small pieces and immersed into a solution of sulfuric acid in order to attach sulfonic group to polymer chain, these groups are responsible for the exchange properties of the modified plastic. The cation exchange capacity (CEC) was determined and was comparable to commercial exchangers. The adsorption isotherms of resin with synthetic wastewater containing lead and cadmium ions were tested. Adsorption analysis results obtained at various concentrations showed that the adsorption pattern on the resin followed Langmuir isotherms.     

Anionic Methyl Orange Removal from Aqueous Solutions by Activated Carbon Reinforced Conducting Polyaniline as Adsorbent: Synthesis,Characterization, Adsorption Behavior,Regeneration and Kinetics Study

This work investigated the elimination of Methyl Orange (MO) using a new adsorbent prepared from Activated Carbon (AC) with polyaniline reinforced by a simple oxidation chemical method. The prepared materials were characterized using XRD, TGA, FTIR and nitrogen adsorption isotherms. Furthermore, PANI@CA highest specific surface area values (near 332 m² g^?1) and total mesoporous volume (near 0.038 cm³ g^?1) displayed the better MO removal capacity (192.52 mg g^?1 at 298 K and pH 6.0), which is outstandingly higher than that of PANI (46.82 mg g^?1). Besides, the process’s adsorption, kinetics, and isothermal analysis were examined using various variables such as pH, MO concentration and contact time. To pretend the adsorption kinetics, various kinetics models, the pseudo first- and pseudo second- orders, were exercised to the experimental results. The kinetic analysis revealed that the pseudo second order rate law performed better than the pseudo first order rate law in promoting the formation of the chemisorption phase. In the case of isothermal studies, an analysis of measured correlation coefficient (R²) values showed that the Langmuir model was a better match to experimental results than the Freundlich model. By regeneration experiments after five cycles, acceptable results were observed.

     

Removal of Cr(VI) Ions from Aqueous Solutions Using Poly 3-Methyl Thiophene Conducting Electroactive Polymers

This paper deals with a new application of poly 3-methyl thiophene synthesized chemically onto sawdust (termed as P3MTh/SD) as an effective adsorbent for removal of Cr(VI) ions from aqueous solutions using column system. Chemical synthesis of poly 3-methyl thiophene was performed by addition of ferric chloride (in chloroform) as oxidant to sawdust which had previously been soaked in monomer solution. All the sorption experiments were conducted using dynamic or column system at room temperature. The effect of important parameters such as pH and initial concentration on uptake of Cr(VI) was investigated. In order to find out the possibility of the regeneration and reuse of the exhausted adsorbent, desorption studies were also performed. The currently introduced adsorbent was found to be an efficient adsorbent for removal of highly toxic and hazardous Cr(VI) ions from aqueous solutions. As our breakthrough analysis has indicated, each gram of P3MTh/SD is able to remove more than 95% of Cr(VI)ions from 300 mL of Cr(VI) polluted solution with the initial concentration of 25 mg L⁻¹ in column system. Sorption/desorption of Cr(VI) ions was found to be a highly pH dependent processes.     

Extraction of Lignosulfonate from Black Liquor into Construction of a Magnetic Lignosulfonate-Based Adsorbent and Its Adsorption Properties for Dyes from Aqueous Solutions

Journal of Polymers and the Environment - Lignosulfonate, one of the lignin derivatives, was extracted from the black liquor as a byproduct of the wood and paper industry. It was used to prepare...     

中孔活性炭对水溶液中Cr3+的吸附

采用模板法和氢氧化钾化学活化法制备出不同中孔率的中孔活性炭并用于水中Cr3+的静态吸附,探讨了中孔活性炭吸附Cr3+的影响因素.实验结果表明,当溶液pH为6.0、吸附温度为50℃、吸附时间为120min、活性炭加入量为2.0g/L以及活性炭中孔率为80.0％～90.0％时.中孔活性炭对溶液中Cr3+的去除率达到98.5％.分别采用Langmuir和Freundlich方程拟合活性炭对Cr3+吸附的等温线,发现Langmuir等温吸附模型对活性炭吸附Cr3+拟合程度更好.活性炭中孔率的增大有利于提高Cr3+的平衡吸附量,但同时还受到活性炭表面酸总量的影响.吸附Cr3+前、后活性炭的FTIR谱图表明,Cr3+与活性炭表面含氧官能团发生了离子交换反应.     

Evaluation of the Biosorption Characteristics of <Emphasis Type="Italic">Tremella fuciformis</Emphasis> for the Decolorization of Cationic Dye from Aqueous Solution

The present work reported on the evaluation of the methylene blue dye biosorption property of Tremella fuciformis under different experimental conditions. Batch mode experiments were carried out using different experimental parameters such as initial pH, dye concentration, biosorbent amount, contact time and temperature. Four widely used kinetic models were used to elucidate the biosorption kinetics. And the kinetic analysis illustrated that the experimental data best followed the pseudo-second-order kinetic model. Biosorption equilibrium was also investigated using four widely used isotherm models. The results indicated that the experimental equilibrium data fitted very well with Langmuir isotherm models. Thermodynamic analysis of biosorption processes was found to be feasibility, spontaneous and exothermic nature of MB biosorption. These results indicated that T. fuciformis would be a high effective and environmental friendly biosorbent for MB removal from aqueous solution.     

The Removal of Acid Violet 90 from Aqueous Solutions Using PANI and PANI/Clinoptilolite Composites: Isotherm and Kinetics

Polyaniline (PANI) and polyaniline/Gördes-clinoptilolite (PANI/GC) composite materials were synthesized by the chemical oxidative polymerization technique and used in the adsorption of Acid Violet 90 metal-complex dye (AV 90). The samples were characterized by X-ray diffractions, nitrogen adsorption–desorption isotherms, scanning electron microscopes and Fourier transform infrared. The effect of initial pH (2–8), sorbent dosage (0.5–4.0 g/L) and initial dye concentrations (50–400 mg/L) on adsorption onto PANI and PANI/GC were examined in a batch system. Langmuir, Freundlich and Temkin isotherm models were used to investigate the adsorption mechanism of AV 90 on PANI and PANI/GC. Langmuir isotherm model for PANI/GC and Freundlich isotherm model for PANI were fitted well with the experimental data. The highest dye uptake capacities were obtained with Langmuir isotherm model as 153.85 mg/g and 72.46 mg/g for PANI and PANI/GC, respectively. In order to determine the adsorption kinetics, pseudo first-order and second-order kinetic models were studied. As a result, the adsorption of AV 90 dye on PANI and PANI/GC was better identified with Pseudo second-order kinetic model than the first one.     

Fe(III) Complexed Polydopamine Modified Mg/Al Layered Double Hydroxide Enhances the Removal of Cr(VI) from Aqueous Solutions

Journal of Polymers and the Environment - Herein, we report the preparation of Fe(III) complexed polydopamine modified Mg/Al layered double hydroxides composite material (LDHs@PDA-Fe(III)) and its...     

Experimental and Modeling Studies for the Removal of Crystal Violet Dye from Aqueous Solutions using Eco-friendly <Emphasis Type="Italic">Gracilaria corticata</Emphasis> Seaweed Activated Carbon/Zn/Alginate Polymeric Composite Beads

This research article describes, an eco-friendly activated carbon prepared from the Gracilaria corticata seaweeds which was employed for the preparation of biodegradable polymeric beads for the efficient removal of crystal violet dye in an aqueous solution. The presence of chemical functional groups in the adsorbent material was detected using FTIR spectroscopy. The morphology and physical phases of the adsorbent materials were analyzed using SEM and XRD studies respectively. Batch mode dye adsorption behavior of the activated carbon/Zn/alginate polymeric beads was investigated as a function of dosage, solution pH, contact time, initial dye concentration and temperature. Maximum dye removal was observed at a pH of 5.0, 1 g of adsorbent dosage with 60 mg/L dye concentration, 50 min of contact time and at 30 °C. The equilibrium modeling studies were analyzed with Freundlich and Langmuir adsorption isotherms and the adsorption dynamics was predicted with Lagergren’s pseudo-first order, pseudo-second order equations and intra particle diffusion models. The process of dye removal followed a pseudo second-order kinetics rather than pseudo first order. The thermodynamic parameters like standard Gibbs free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were determined and the results imply that the adsorption process was spontaneous, endothermic and increases the randomness between the adsorbent and adsorbate. The results from the experimental and correlation data reveal that the Gracilaria corticata activated carbon/Zn/alginate polymeric beads have proved to be an excellent adsorbent material for the removal of CV dye.