Levels and Composition of Atmospheric Particulates (PM10) in a Mining-Industrial Site in the City of Lavrion,Greece

Abstract

The present work focuses on the characterization of air quality and the identification of pollutant origin at a former mining site in the city of Lavrion, Greece. A historical metallurgy complex is reused for establishing the Lavrion Technology and Cultural Park (LTCP). A serious problem with this is the severe soil contamination that resulted from intensive mining and metallurgical activities that has taken place in the greater area for the past 3000 years. Among other consequences, surface-polluted depositions, rich in heavy and toxic metals, are loose and easily wind-eroded, resulting in transportation of particu-late matter (PM) in the surrounding atmosphere. On the other hand, there are a number of industries relatively close to the site that are potential sources of PM air pollution. The current study deals with the collection and analysis of PM₁₀ samples with respect to their concentration in heavy metals, such as Pb, Cd, Cu, Fe, Zn, Mn, Cr, and Ni. Though not a heavy metal, As also is included. Furthermore, the source of these elements is verified using statistical correlation and by calculating enrichment factors (EFs), considering that some substances are certainly of contaminated soil origin. Results show that PM₁₀ and element concentrations are relatively low during winter but significantly increase during summer. Fe, Pb, Zn, Mn, and Cu may be considered of contaminated soil origin, while As, Ni, Cd, and Cr are very much enriched with respect to contaminated soil, indicating another possible source attributed to the adjacent industrial plants.     

Sources of airborne particulates (PM10) in the port city of Rijeka,Croatia

Environmental Science and Pollution Research - The air quality monitoring in Rijeka started in the early 1970s and has been oriented to air pollution caused by the big industrial sources (new...     

Ionic composition of PM(10) in the area of Thessaloniki,Greece

Airborne particulate matter (PM(10)) was collected from July 1997 to July 1998 at three locations in the city of Thessaloniki. PM(10) samples were analyzed for Cl(-), NO3(-), SO4(2-), Ca(2+), Mg(2+), Na(+), K(+) and NH4(+). The average PM(10) concentrations were found similar in all three sites with higher values in cold period. The ionic content comprised the 17-23% of the PM(10) mass and sulfate made up the 35-38% of the PM(10) ionic content with an average concentration of 4.80-7.26 microg m(-3). Good correlation was found for SO4(2-) and NO3(-) with Ca(2+), Mg(2+) and Cl(-). Two factors were found to influence the variance of ionic constituents in PM(10) by using factor analysis. Data evaluation considering wind direction showed that higher PM(10) and other ionic concentrations are associated with calm conditions, suggesting influences of local sources.     

Analysis of atmospheric aerosol (PM2.5) in Recife city,Brazil

Several studies indicate that mortality and morbidity can be well correlated to atmospheric aerosol concentrations with aerodynamic diameter less than 2.5 µm (PM_2.5). In this work the PM_2.5 at Recife city was analyzed as part of a main research project (INAIRA) to evaluate the air pollution impact on human health in six Brazilian metropolitan areas. The average concentration, for 309 samples (24-hr), from June 2007 to July 2008, was 7.3 µg/m³, with an average of 1.1 µg/m³ of black carbon. The elemental concentrations of samples were obtained by x-ray fluorescence. The concentrations were then used for characterizing the aerosol, and also were employed for receptor modelling to identify the major local sources of PM_2.5. Positive matrix factorization analysis indicated six main factors, with four being associated to soil dust, vehicles and sea spray, metallurgical activities, and biomass burning, while for a chlorine factor, and others related to S, Ca, Br, and Na, we could make no specific source association. Principal component analysis also indicated six dominant factors, with some specific characteristics. Four factors were associated to soil dust, vehicles, biomass burning, and sea spray, while for the two others, a chlorine- and copper-related factor and a nickel-related factor, it was not possible to do a specific source association. The association of the factors to the likely sources was possible thanks to meteorological analysis and sources information. Each model, although giving similar results, showed factors’ peculiarities, especially for source apportionment. The observed PM_2.5 concentration levels were acceptable, notwithstanding the high urbanization of the metropolitan area, probably due to favorable conditions for air pollution dispersion. More than a valuable historical register, these results should be very important for the next analysis, which will correlate health data, PM_2.5 levels, and sources contributions in the context of the six studied Brazilian metropolises.

Implications: The analysis of fine particulate matter (PM_2.5) in Recife city, Brazil, gave a significant picture of the local concentration and composition of this pollutant, which exhibits robust associations to adverse human health effects. Data from 1 year of sampling evaluated the seasonal variability and its connections with weather patterns. Source apportionment in this metropolitan area was obtained based in a combination of receptor models: principal component analysis (PCA)/chemical mass balance (CMB) and positive matrix factorization (PMF). These results give guidelines for local air pollution control actions, providing significant information for a health study in the context of establishing a new national air pollution protocol based on Brazilian cities data.     

Statistical characterization of atmospheric PM10 and PM2.5 concentrations at a non-impacted suburban site of Istanbul, Turkey

Inhalable particulate matter (PM10) has been monitored at several stations by Istanbul Municipality. On the other hand, information about fine fraction aerosols (PM2.5) in Istanbul atmosphere was not reported. In this study, 86 daily aerosol samples were collected between July 2002 and July 2003. The PM10 annual arithmetic mean value of 47.1 microg m(-3), was lower than the Turkish air quality standard of 60 microg m(-3). On the other hand, this value was found higher than the annual European Union air quality PM(10) standard of 40 microg m(-3). Furthermore, the annual mean concentration of PM2.5 20.8 microg m(-3) was found higher than The United States EPA standard of 15 microg m(-3). The statistics and relationships of fine, coarse, and inhalable particles were studied. Cyclic behavior of the monthly average concentrations of PM10 and PM2.5 data were investigated. Several frequency distribution functions were used to fit the measured data. According to Chi-squared and Kolmogorov-Smirnov tests, the frequency distributions of PM2.5 and PM10 data were found to fit Log-logistic functions.     

Arsenic speciation of atmospheric particulate matter (PM10) in an industrialised urban site in southwestern Spain

An arsenic speciation study has been performed in PM10 samples collected on a fortnight basis in the city of Huelva (SW Spain) during 2001 and 2002. The arsenic species were extracted from the PM10 filters using a NH2OH x HCl solution and sonication, and determined by HPLC-HG-AFS. The mean bulk As concentration of the samples analyzed during 2001 and 2002 slightly exceed the mean annual 6 ng m(-3) target value proposed by the European Commission for 2013, arsenate [As(V)] being responsible for the high level of arsenic. The speciation analyses showed that As(V) was the main arsenic species found, followed by arsenite [As(III)] (mean 6.5 and 7.8 ng m(-3) for As(V), mean 1.2 and 2.1 ng m(-3) for As(III), in 2001 and 2002, respectively). The high levels of arsenic species found in PM10 in Huelva have a predominant industrial origin, such as the one from a nearby copper smelter, and do not present a seasonal pattern. The highest daily levels of arsenic species correspond to synoptic conditions in which the winds with S and SW components transport the contaminants from the main emission source. The frequent African dust outbreaks over Huelva may result in an increment of mass levels of PM10, but do not represent a significant input of arsenic in comparison to the anthropogenic source. The rural background levels of arsenic around Huelva are rather high, in comparison to other rural or urban areas in Spain, showing a relatively high atmosphere residence time of arsenic. This work shows the importance of arsenic speciation in studies of aerosol chemistry, due to the presence of arsenic species [As(III) and As(V)] with distinct toxicity.     

武汉春季大气PM10浓度及有机组成变化特征

采集了武汉春季大气PM10样品,用超声萃取、衍生化、气相色谱/质谱(GC/MS)技术分析了其有机组成.结果表明,PM10质量浓度为160.3～296.7 μg/m3,其夜晚浓度大于白天.PM10中有机物浓度总体表现为正烷酸>左旋葡聚糖>正构烷烃>二元酸>甘油酸酯>多环芳烃>甾醇>藿烷和甾烷的特征,夜晚浓度大于白天,工作日(周一至周五)大于周末(周六、周日).武汉大气颗粒有机物(POM)既有来源于植物蜡等自然源的输入,也有交通和食物烹饪等人为源的影响.     

PM10 regional transport pathways in Thessaloniki,Greece

In this study, the most dominant regional transport pathways for the city of Thessaloniki, Greece were identified and linked to air quality issues with respect to particulate matter (PM). Using air mass trajectories, cluster analysis techniques and PM10 measurements of a background-urban station of the greater Thessaloniki area during 2001–2004, it was found that north-eastern and southern flows were the most frequent in appearance with high potential to influence the city of Thessaloniki, especially when coinciding with biomass burning or Saharan dust events correspondingly. These incidents appeared to occur mostly during summer adding to a PM10 monthly mean up to 10 μg m^?3. High concentrations of surface PM10 related to north-eastern flows were in most cases accompanied with high aerosol columnar optical depths implying that particulate matter transport from the North-East was multi-layered. South-southwesterly flows originating from N. Africa, though less frequent, seemed to affect decisively Thessaloniki's aerosol budget especially during transition seasons. These flows were related with an increase of the monthly PM10 average up to 20–30 μg m^?3 for the time period studied. Finally, northerly flows were found to transport rather clean air masses that did not seem to contribute to the air quality deterioration of the city.     

PM10-bound polycyclic aromatic hydrocarbons (PAHs) in the Greater Area of Athens, Greece

Polycyclic aromatic hydrocarbons (PAHs) associated to ambient PM10 were determined at four sites within the Greater Athens Area (GAA), Greece, during the period May 2001-June 2002. Daily average PM10 samples were collected using reference samplers installed in two urban locations (Maroussi, MAR and Aristotelous, ARI), a mixed urban-industrial location (Elefsina, ELE), and a background location (Thracomacedones, THR). Spatial and temporal variation of ambient PAH levels and possible relationships with conventional air pollutants and meteorological parameters were investigated. Moreover, source identification was attempted using diagnostic ratios. The PAH concentrations observed in this study, even in downtown Athens, were towards the lowest end of the range of values reported for other European urban locations. The mean concentration of the well known carcinogen B[alpha]Py was at all four sites below the proposed value of 1 ng m-3 (annual average assessment threshold). Automobile traffic was identified as the major PAH source in the GAA exhibiting greatest contribution in the urban sites.     

Characterization of PM10 atmospheric aerosol at urban and urban background sites in Fuzhou city, China

Background

PM₁₀ aerosol samples were simultaneously collected at two urban and one urban background sites in Fuzhou city during two sampling campaigns in summer and winter. PM₁₀ mass concentrations and chemical compositions were determined.

Methods

Water-soluble inorganic ions (Cl^?, NO ₃ ^? , SO ₄ ^2? , NH ₄ ⁺ , K⁺, Na⁺, Ca²⁺, and Mg²⁺), carbonaceous species (elemental carbon and organic carbon), and elements (Al, Si, Mg, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, and Pb) were detected using ion chromatography, thermal/optical reflectance, and proton-induced X-ray emission methods, respectively.

Results

PM₁₀ mass concentrations, as well as most of the chemical components, were significantly increased from urban background to urban sites, which were due to enhanced anthropogenic activities in urban areas. Elements, carbonaceous species, and most of the ions were more uniformly distributed at different types of sites in winter, whereas secondary ion SO ₄ ^2? , NO ₃ ^? , and NH ₄ ⁺ showed more evident urban-background contrast in this season. The chemical mass closure indicated that mineral dust, organic matters, and sulfate were the most abundant components in PM₁₀. The sum of individually measured components accounted for 86.9?C97.7% of the total measured PM₁₀ concentration, and the discrepancy was larger in urban area than in urban background area.

Conclusion

According to the principal component analysis?Cmultivariate linear regression model, mineral dust, secondary inorganic ions, sea salt, and motor vehicle were mainly responsible for the PM₁₀ particles in Fuzhou atmosphere, and contributed 19.9%, 53.3%, 21.3%, and 5.5% of PM₁₀, respectively.     

Characterization of atmospheric particulates, particle-bound transition metals and polycyclic aromatic hydrocarbons of urban air in the centre of Athens (Greece)

The concentrations of trace metals and polycyclic aromatic hydrocarbons (PAHs) adsorbed to total suspended particulate (TSP) and finer fractions of airborne particulate matter (PM) were determined from a site in the centre of Athens (Greece), which is characterized by heavy local traffic and is densely populated, during the winter and summer periods in 2003-2004. Also, we collected and analyzed samples of diesel and gasoline exhaust particles from local vehicles (buses, taxis and private cars) and from chimney exhaust of residential central heating appliances. A seasonal effect was observed for the size distribution of aerosol mass, with a shift to larger fine fractions in winter. The most commonly detected trace metals in the TSP and PM fractions were Fe, Pb, Zn, Cu, Cr, V, Ni and Cd and their concentrations were similar to levels observed in heavily polluted urban areas from local traffic and other anthropogenic emissions. Analysis of 16 PAHs bound to PM showed that they are mostly traffic related. In general, the fine particulate PAHs concentrations were higher than coarse particles. The most common PAHs in PM(10.2) and PM(2.1) were pyrene, phenanthrene, acenapthylene and fluoranthene, which are associated with diesel and gasoline exhaust particles. The results of this study underlined the importance of local emission sources, especially vehicular traffic, central heating and other local anthropogenic emissions. Compared with other big cities, Athens has much higher levels of airborne particles, especially of the finer fractions PM(10) and PM(2.5), correlated with traffic-related air pollution.     

Concentrations of aliphatic and polycyclic aromatic hydrocarbons in ambient PM2.5 and PM10 particulates in Doha,Qatar

Organic carbon (OC), elemental carbon (EC), and 90 organic compounds (36 polycyclic aromatic hydrocarbons [PAHs], 25 n-alkane homologues, 17 hopanes, and 12 steranes) were concurrently quantified in atmospheric particulate matter of PM_2.5 and PM₁₀. The 24-hr PM samples were collected using Harvard Impactors at a suburban site in Doha, Qatar, from May to December 2015. The mass concentrations (mean ± standard deviation) of PM_2.5 and PM₁₀ were 40 ± 15 and 145 ± 70 µg m^?3, respectively, exceeding the World Health Organization (WHO) air quality guidelines. Coarse particles comprised 70% of PM₁₀. Total carbonaceous contents accounted for 14% of PM_2.5 and 10% of PM₁₀ particulate mass. The major fraction (90%) of EC was associated with the PM_2.5. In contrast, 70% of OC content was found in the PM_2.5–10 fraction. The secondary OC accounted for 60–68% of the total OC in both PM fractions, indicating photochemical conversions of organics are much active in the area due to higher air temperatures and solar radiations. Among the studied compounds, n-alkanes were the most abundant group, followed by PAHs, hopanes, and steranes. n-Alkanes from C₂₅ to C₃₅ prevailed with a predominance of odd carbon numbered congeners (C₂₇–C₃₁). High-molecular-weight PAHs (5–6 rings) also prevailed, within their class, with benzo[b + j]fluoranthene (Bb + jF) being the dominant member. PAHs were mainly (80%) associated with the PM_2.5 fraction. Local vehicular and fugitive emissions were predominant during low-speed southeasterly winds from urban areas, while remote petrogenic/biogenic emissions were particularly significant under prevailing northwesterly wind conditions.

Implications: An unprecedented study in Qatar established concentration profiles of EC, OC, and 90 organic compounds in PM_2.5 and PM₁₀. Multiple tracer organic compounds for each source can be used for convincing source apportionment. Particle concentrations exceeded WHO air quality guidelines for 82–96% of the time, revealing a severe problem of atmospheric PM in Doha. Dominance of EC and PAHs in fine particles signifies contributions from combustion sources. Dependence of pollutants concentrations on wind speed and direction suggests their significant temporal and spatial variability, indicating opportunities for improving the air quality by identifying sources of airborne contaminants.     

Long-term trends in atmospheric pollen levels in the city of Thessaloniki,Greece

We examined the long-term trends in pollen atmospheric levels in Thessaloniki, the second largest city of Greece. On the basis of data collected during the period 1987–2005, we estimated trends in the atmospheric pollen levels for the 16 different taxa, each of whose contribution to the total atmospheric pollen concentration was at least 0.5%. We also tested for trends towards earlier, longer or more highly peaked pollen seasons. The salient feature of these data is that the levels of pollen have been increasing; this is true for the majority of the individual taxa examined (12 out of 16) and for their aggregate. On average, the atmospheric pollen concentration is doubling every decade, but for some species the rate is much higher, with doubling times less than 5 years. Among the taxa with the highest rate of long-term trend in atmospheric pollen concentration, four belong to the group of woody plants (Cupressaceae, Quercus, Platanus, Pinaceae) and only one to that of herbs (Urticaceae). For the pollen-season-related attributes (onset, peak, end and duration), there was no systematic tendency and the changes were more nuanced. The observed increase in pollen abundance coincides with a rise in air temperature, which is the only meteorological factor to have experienced a sustained and significant change over the same period in Thessaloniki. Our results suggest that changes in pollen distributions are dominated by increases in pollen production rather than changes in flowering phenology and that several species showing strong trends might serve as bio-indicators of expected climate change. Given that the pollen-producing reservoir around the city has not increased, these results provide further evidence of the impact of climate change on plant biota.     

Elemental characterization of PM10, PM2.5 and PM1 in the town of Genoa (Italy)

The particulate matter (PM) concentration and composition, the PM10, PM2.5, PM1 fractions, were studied in the urban area of Genoa, a coastal town in the northwest of Italy. Two instruments, the continuous monitor TEOM and the sequential sampler PARTISOL, were operated almost continuously on the same site from July 2001 to September 2004. Samples collected by PARTISOL were weighted to obtain PM concentration and then analysed by PIXE (particle induced X-ray emission) and by ED-XRF (energy dispersion X-ray fluorescence), obtaining concentrations for elements from Na to Pb. Some of the filters used in the TEOM microbalance were analysed by ED-XRF to calculate Pb concentration values averaged over 7-30 d periods.     

The study of TSP, PM(2.5-10) and PM2.5 during Taiwan Chi-Chi Earthquake in the traffic site of central Taiwan, Taichung

Ambient particle concentration was taken on the traffic sampling site over the Chung-Chi Road over bridge (CCROB) in front of Hungkuang Institute of Technology (HKIT). The sampling time was from August 1999 to December 1999. During the sampling period, Taiwan's biggest earthquake in more than a century registered 7.3 on the Richter scale (Taiwan Chi-Chi Earthquake). Besides, there were more than 20,000 aftershocks that followed the Taiwan Chi-Chi Earthquake within three months. Thus, the PM2.5, PM(2.5-10) particle concentrations were also collected then and compared with total suspended particle (TSP) in this study. The average PM(2.5-10), PM2.5 and TSP concentrations are 24.6, 58.0 and 106 microg/m3, respectively, after the Taiwan Chi-Chi Earthquake. The average TSP concentrations before and after Taiwan Chi-Chi Earthquake were 70 and 127 microg/m3, respectively. It is clearly shown that the average concentration of TSP after Taiwan Chi-Chi Earthquake was about 1.8 times as that of TSP concentration before Taiwan Chi-Chi Earthquake in the traffic site of central Taiwan. And the ratios of PM2.5/PM(2.5-10), PM2.5/PM10 and PM2.5/TSP are 2.2%, 67.2%, 38.9%, respectively. The results also indicated about Chi-Chi fine particle concentration (PM25) and the TSP increases in the traffic site of central Taiwan after Taiwan Chi-Chi Earthquake.     

A study on nighttime–daytime PM10 concentration and elemental composition in relation to atmospheric dispersion in the urban area of Milan (Italy)

In this paper, results on a PM10 daytime–nighttime measurement campaign carried out in Milan to study the evolution of PM10 concentration and composition in relation to atmospheric dispersion conditions are shown. To account for the evolution of atmospheric dispersion conditions, Radon hourly concentration measurements were performed. The significant correlation between PM10 and ²²²Rn daytime concentrations evidences the dominant role of atmospheric dispersion in determining the temporal variation of PM10 levels. Whenever ²²²Rn concentrations accumulate during the night (indicating the formation of nocturnal atmospheric stability conditions), PM10 concentrations are higher than those registered during the daytime before, despite a decrease in emissions from active sources. On the contrary, when ²²²Rn concentrations do not accumulate during night hours, PM10 levels are lower than those measured during the daytime before.As concerns the average elemental concentrations (in ng m⁻³), the nighttime–daytime variations are in the range −17% to +37%; during the night, soil-related elements (Al, Si, Ca, Ti) decrease while anthropogenic elements (Zn, Cu, Fe, Pb) increase.A case study concerning a ‘green’ Sunday (when traffic was forbidden from 8 a.m. to 8 p.m.) is also discussed. The difference of PM10 concentration and elemental composition registered during the ‘green’ Sunday daytime and the following nighttime, together with the information on atmospheric dilution power obtained by Radon measurements, allowed the characterisation of the traffic source elemental profile and increased the comprehension of the low effectiveness of some PM10 reduction strategies.     

Mutagenic and recombinagenic activity of airborne particulates, PM10 and TSP, organic extracts in the Drosophila wing-spot test

The genotoxicity associated with air pollution in the city of Canoas, Rio Grande do Sul (Brazil), was assessed in November (spring) and January (summer). We applied the somatic mutation and recombination test (SMART) in Drosophila melanogaster in its standard version with normal bioactivation (ST) and in its variant with increased cytochrome P450-dependent biotransformation capacity (HB). The data indicated the genotoxicity of TSP and PM10 collected in November, in both ST and HB crosses. The genotoxic activity of the PM10 material in the spring sample was exclusively associated with the induction of mitotic recombination, whereas the TSP genetic toxicity was due to both recombinational as well as point and/or chromosomal mutation events. Considering PM10 collected in January, a positive response--100% (17.10 m3/ml) concentration--was observed in the HB cross, which was not detected in the ST cross.     

Using PM10 geochemical maps for defining the origin of atmospheric pollution in Andalusia (Southern Spain)

In this work we present a detailed study of atmospheric PM₁₀ pollution in Andalusia (Southern Spain) based on geochemical maps. The study includes determination of PM₁₀ levels and bulk chemical composition with samples from 17 representative monitoring stations (rural, urban background, traffic hot spot, and urban zones with industrial influence) during 2007. The knowledge of background levels and concentrations of relevant chemical compounds and elements allows the quantification of the main sources of pollution in relevant cities and sites of ecological interest.In comparison to other stations in Spain and mainland Europe, PM₁₀ in Andalusia is characterized by high levels of crustal matter and secondary inorganic components (SIC). This has been attributed to the following causes: 1) High road traffic and industrial emissions, 2) High frequency of North African air mass outbreaks contributing between 3 and 4 μg m^?3 in western Andalusia and 4–7 μg m^?3 in eastern Andalusia, and 3) Climate factors such as low rainfall, dry soils favouring resuspension, and high photochemical activity.Atmospheric particulate matter in urban areas located in the vicinity of industrial estates is enriched in secondary inorganic compounds and metals. Three main hot spots have been identified according their high trace element concentrations: Huelva (As, Cu, Zn, Se, and Bi), Strait of Gibraltar (V, Ni, Cr, and Co) and Bailén (V and Ni). The transport of pollutants from cities and industrial estates to areas of ecological interest (e.g. Doñana National Park) has been found to cause the increase in background levels in a number of trace elements (e.g. As) in the air. An important outcome of this study is that geochemical maps of atmospheric matter are a powerful tool for illustrating spatial variation patterns of geochemical components and identifying specific pollution hot spots.