PCB and dioxin-like PCB in indoor air of public buildings contaminated with different PCB sources--deriving toxicity equivalent concentrations from standard PCB congeners

Data on dioxin-like PCB in indoor air of buildings with PCB-containing materials and on possible correlation between toxicity equivalent concentrations (TEQ) and levels of non-dioxin-like standard PCB is sparse. As part of a larger survey on indoor-air contamination with PCB, the connection between the concentration of standard PCB congeners and the dioxin-like toxicity expressed as TEQ was investigated. Indoor air samples (n=8) were collected in four public buildings with known PCB sources and total PCB levels in the range from 715 to 2250 ng/m3 and analyzed for the six non-dioxin-like standard PCB (congeners 28, 52, 101, 138, 153, 180), the twelve dioxin-like PCB congeners according to WHO and the 17 2,3,7,8-substituted PCDD/PCDF congeners. In three buildings where PCB were used as flame retardant coatings of acoustic ceiling tiles, PCB 101 had the maximum level among the six standard PCB, while in the building with permanent elastic sealants as PCB source, congeners 28 and 52 dominated the pattern by far. In the case of permanent elastic sealants as PCB source (n=3) a total PCB concentration of 1000 ng/m3 corresponded to a total TEQ level of 0.3-0.6 pg/m3. In contrast, in rooms with acoustic ceiling tiles as PCB source, 1.8-4.7 pg TEQ/m3 per 1000 ng total PCB/m3 were found. Linear regression analysis between PCB and TEQ indicated that PCB 118 might be used to calculate the total TEQ of dioxin-like PCB and PCDD/PCDF. By means of such a correlation it is possible to estimate TEQ by extrapolation from the results of less sophisticated analytical methods. It is tentatively recommended to use PCB 118 for screening purposes or re-evaluation of standard PCB indoor-air measurements. If only the six non-dioxin-like PCB standard congeners are available, a regression algorithm using the sum of PCB 101, 138, 153 and 180 might be used instead.     

Exoenzymes of Trametes versicolor can metabolize coplanar PCB congeners and hydroxy PCB

Two fractions containing the oxidase activity toward 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonate) (ABTS) were obtained using ion-exchange DEAE-Sepharose column chromatography of the culture fluid of white-rot fungus, Trametes versicolor. These two fractions can reduce the level of coplanar PCB congeners (Co-PCBs). The ABTS oxidase in the first fraction passed through the DEAE-Sepharose column. The ABTS oxidase in the second fraction was adsorbed to the column at 相似文献   

销毁含多氯联苯废弃物焚烧炉的二噁、类二噁和多氯联苯排放

我国正在研制专用于销毁高浓度多氯联苯（ＰＣＢｓ）的焚烧炉,主要处理废旧的含（ＰＣＢｓ）的电力电容器和变压器,应用可靠准确的监测方法测定了试验性焚烧炉渣、烟灰排气和废水中的二口恶口英（ｄｉｏｘｉｎｓ）,类二口恶口英多氯联苯（ｄｉｏｘｉｎｌｉｋｅＰＣＢｓ）和ＰＣＢｓ含量,结果表明该炉试烧高浓度ＰＣＢｓ时,焚毁率可以达到９９．９９９９％,炉渣中的２,３,７,８ＴＣＤＤ毒性当量为８７．８６ｐｇＴＥＱ／ｇ,烟灰中残留二口恶口英和类二口恶口英的总２,３,７,８ＴＣＤＤ毒性当量为４７．２３ｎｇＴＥＱ／ｇ．     

Detailed PCB congener patterns in incinerator flue gas and commercial PCB formulations (Kanechlor)

In this study, we determined the detailed PCB congener patterns in flue gases from eight incinerators and four commercial PCB formulations (Kanechlors). About 160 PCB peaks were identified in samples using a DB-5 column and HRGC/HRMS. The concentration of incinerator stack emission gas ranged from 0.02 to 44 ngWHO-TEQ/Nm3. The ratios of dioxin-like PCBs in the total PCB concentration were from 3.4% to 25.7% and from 0.63% to 9.1% in stack emission gases and Kanechlor samples, respectively. The PCB congener profiles of Kanechlor samples were similar to those of previous studies. To determine characteristic congeners in flue gas and Kanechlor samples, principal component analysis (PCA) of the data was conducted using STATISTICA for Windows 5.0J (StatSoft, Inc.). As a result, we obtained four principal components (PCs) and accounted for 74% of the total variance. PC 1 was interpreted combustion, PC 2 and PC 3 were interpreted the difference in the number of substituted chlorines and, PC 4 could not be determined. Moreover, we obtained three groups according to the PCB congeners pattern among samples by PCA. These specific congeners that represent characteristics of each class were identified. These data will be useful for the source analysis of PCBs in the environment.     

Levels of PCB 126 and PCB 153 in plasma and tissues in goats exposed during gestation and lactation

The aim of the present study was to gain knowledge about the disposition of the PCB congeners 126 and 153 in a goat model where pregnant does were given oral doses of PCB from day 60 of gestation until delivery. The goat kids were thus exposed to PCB during gestation and lactation. The doses of PCB 153 and PCB 126 were 98 and 49 ng/kg body wt/day, respectively. PCB levels were measured in plasma from the does at day 90 of gestation and at delivery, and in plasma from the kids at birth and four weeks post partum. Concentrations of PCB were analysed in brain, liver and fat tissue from the does six weeks after delivery and in liver and fat tissue from the kids at nine months of age. The ratio of estimated body burden to ingested dose in the does, was 0.95 +/- 0.07 for PCB 153 and 0.41 +/- 0.03 for PCB 126. Approximately 9% of PCB 153 and 6% of PCB 126 was transferred from the mothers to their kids during gestation and lactation. Prenatal exposure contributed to a much lower fraction of the body burden than postnatal PCB intake via milk, due to the fact that almost 100% of the PCB 153 transferred from the does to kids was transferred via milk, and the PCB 126 intake via milk was threefold higher than the calculated body burden. The hepatic PCB 126 concentration in both does and kids was significantly higher than the concentration in fat, in contrast to PCB 153, where the highest concentrations were found in fat. A significant difference in body burden between the does at delivery, the newborn kids, and the kids at four weeks of age, did not influence the plasma concentration of PCB 153 on a fat weight basis, which showed no difference with sampling time. Our results suggest that PCB 126 and PCB 153 have different pharmacokinetic properties. The higher levels of PCB 126 in liver tissue compared to fat tissue confirm the concept of hepatic sequestration. The similar blood concentration of PCB 153 in the does at delivery and their newborn kids despite the considerable difference in body burden, suggests a high degree of placental transfer. This supports previous observations that low molecular weight, lipid-soluble, non-polar chemicals reach the fetus to the greatest possible extent. For PCB 153, the body burden may provide the appropriate dose metric at steady state, but may give a minor underestimation of PCB 126 at low environmental exposure levels due to hepatic sequestration.     

Volatility of TCDD and PCB from soil

Volatilisation fluxes of 2,3,7,8-tetrachlorodibenzodioxin and Aroclors 1242, 1254 and 1260 were estimated from the model of Jury et.al., developed for compounds with similar physical properties. The influence of soil water content, soil organic matter and water evaporation was investigated. Increasing soil organic matter decreased the volatilisation flux of all four chemicals. Water evaporation was accompanied by increased fluxes, implying that the chemicals were susceptible to wicking. The trends observed were in qualitative agreement with field and laboratory studies. The predicted fluxes serve as a basis for comparing their volatilisation behaviour against pesticides and other homologues, and for the construction of models describing the environmental fate of these compounds.     

Congener-specific accumulation of polychlorinated biphenyls in ovarian follicular wall follows repeated exposure to PCB 126 and PCB 153. Comparison of tissue levels of PCB and biological changes

OBJECTIVE: Small (SF), medium (MF) and large (LF) preovulatory porcine follicles were isolated and incubated in an Erlenmeyer flask containing 5 ml of medium with addition of PCB 126 or PCB 153 to test differences in their accumulation in the follicular wall. METHODS; The follicles were incubated in M199 medium at 37 degrees C with constant shaking at 70 rpm, for 6 days. The media were changed every day and repeated dose 25 pg/ml of PCB 126 or 25 ng/ml of PCB 153 was added each day till 6 days of culture. Media were collected every day and frozen for steroid analysis by RIA. 24 h after the last treatment follicles were frozen for further polychlorinated biphenyls (PCB) content analysis. PCB concentrations in the follicular wall were analysed by mass spectrometry. RESULTS: 3.3%; 3.6% and 5.6% of total PCB 126 dose, and 71%; 71.4% and 30.4% of total PCB 153 dose accumulated in SF, MF and LF follicles, respectively. The accumulative effect of PCB was manifested by the disruption of estradiol (E2) secretion. In SF antiestrogenic action of PCB 126 was observed during the whole time of exposure while PCB 153 decreased E2 till 4 days of culture and then estrogenic action was observed. In MF, both these congeners decreased E2 till 5 days of exposure and then estrogenic actions were noted with the highest magnification in the case of PCB 126. In LF both PCB studied increased E2 till 3 days of exposure with the highest magnification of PCB 126, then antiestrogenic action was noted. Testosterone secretion was generally affected in a pattern oposite to that of E2 suggesting action on P450arom activity. CONCLUSION: The results of these studies demonstrated that disruption of aromatization process in the follicles following repeated exposure to both congeners is not directly correlated with the bioaccumulation or amount of PCB within the follicular wall.     

Environmental PCB forensics: processes and issues

Environmental Science and Pollution Research - PCB forensic science is the process of identifying the source(s) of polychlorinated biphenyls (PCBs) at a site in the context of a legal proceeding to...     

PCB in soils and estimated soil-air exchange fluxes of selected PCB congeners in the south of Sweden

PCB concentrations were studied in different soils to determine the spatial variation over a region of approximately 11 000 km(2). PCB congener pattern was used to illustrate the spatial differences, as shown by principal component analysis (PCA). The relationship to different soil parameters was studied. PCB concentrations in soil showed a large variation between sampling-areas with median concentrations ranging between 2.3 and 332 ng g(-1) (dw). Highest concentrations were found at two sites with sandy soils, one with extremely high organic carbon content. Both sites were located on the west coast of southern Sweden. Soils with similar soil textures (i.e. sandy silt moraine) did not show any significant differences in PCB concentrations. PCB congener composition was shown to differ between sites, with congener patterns almost site-specific. PCB in air and precipitation was measured and the transfer of chemicals between the soil and air compartments was estimated. Soil-air fugacity quotient calculations showed that the PCBs in the soil consistently had a higher fugacity than the PCBs in the air, with a median quotient value of 2.7. The gaseous fluxes between soil and air were estimated using standard modelling equations and a net soil-air flux estimated by subtracting bulk deposition from gaseous soil-air fluxes. It was shown that inclusion of vertical sorbed phase transport of PCBs in the soil had a large effect on the direction of the net soil-air exchange fluxes.     

Atmospheric PCB congeners across Chicago

We have measured PCBs in 184 air samples collected at 37 sites in the city of Chicago using an innovative system of high-volume air samplers mounted on two health clinic vans. Here we describe results of sampling conducted from November 2006 to November 2007. The samples were analyzed for all 209 PCB congeners using a gas chromatograph with tandem mass spectrometry (GC-MS/MS). The ΣPCBs (sum of 169 peaks) in Chicago ranged from 75 pg m(-3) to 5500 pg m(-3) and primarily varied as a function of temperature. The congener patterns are surprisingly similar throughout the city even though the temperature-corrected concentrations vary by more than an order of magnitude. The average profile resembles a mixture of Aroclor 1242 and Aroclor 1254, and includes many congeners that have been identified as being aryl hydrocarbon receptor (AhR) agonists (dioxin-like) and/or neurotoxins. The toxic equivalence (TEQ) and neurotoxic equivalence (NEQ) in air were calculated and investigated for their spatial distribution throughout the urban-industrial complex of Chicago. The NEQ concentrations are linearly correlated with ΣPCBs while the TEQ concentrations are not predictable. The findings of this study suggest that airborne PCBs in Chicago are widely present and elevated in residential communities; there are multiple sources rather than one or a few locations of very high emissions; the emission includes congeners associated with dioxin-like and neurotoxic effects and congeners associated with unidentified sources.     

Pressure-assisted ozonation of PCB and PAH contaminated sediments

Sediment contamination by recalcitrant organics such as polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) is prevalent and of a great concern. Remediation efforts are hampered by the hydrophobic nature of the contaminants that limits their availability as well as by the sediment matrix that limits their exposure to treatment agents. Using contaminated sediment samples from the Passaic River, St. Louis River, Waukegan Harbor, and Wells National Estuarine Research Reserve, this research demonstrated a new ozonation technique that incorporates rapid, successive cycles of pressurization (690 kPa) and depressurization, enabling more effective treatment than conventional ozonation would. Conventional ozonation reached maximum 60% and 40% removal of PAHs from the Passaic River (40 mg kg(-1) initially) and St. Louis River sediment (520 mg kg(-1) initially), respectively, in 1h; however, removals ceased despite prolonged treatment for 2h. The pressure-assisted technique removed 96% of PAHs from both river sediments within 1h; it completely removed both PAHs (16 mg kg(-1) initially) and PCBs (5.1 mg kg(-1) initially) from the Waukegan Harbor sediment in 0.5 h. The heightened treatment is explained by soil aggregate fracturing upon pressure cycles that exposes the contaminants as well as by the confluence of hydrophobic contaminants and O(3) at the gas-liquid interface in the presence of microbubbles. The technique is expected to accelerate O(3) treatment of a wide range of organic contaminants, and it may provide treatment to dredged and stored contaminated sediment.     

Evaluation of cumulative PCB exposure estimated by a job exposure matrix versus PCB serum concentrations

Although polychlorinated biphenyls (PCBs) have been banned in many countries for more than three decades, exposures to PCBs continue to be of concern due to their long half-lives and carcinogenic effects. In National Institute for Occupational Safety and Health studies, we are using semiquantitative plant-specific job exposure matrices (JEMs) to estimate historical PCB exposures for workers (n?=?24,865) exposed to PCBs from 1938 to 1978 at three capacitor manufacturing plants. A subcohort of these workers (n?=?410) employed in two of these plants had serum PCB concentrations measured at up to four times between 1976 and 1989. Our objectives were to evaluate the strength of association between an individual worker’s measured serum PCB levels and the same worker’s cumulative exposure estimated through 1977 with the (1) JEM and (2) duration of employment, and to calculate the explained variance the JEM provides for serum PCB levels using (3) simple linear regression. Consistent strong and statistically significant associations were observed between the cumulative exposures estimated with the JEM and serum PCB concentrations for all years. The strength of association between duration of employment and serum PCBs was good for highly chlorinated (Aroclor 1254/HPCB) but not less chlorinated (Aroclor 1242/LPCB) PCBs. In the simple regression models, cumulative occupational exposure estimated using the JEMs explained 14–24 % of the variance of the Aroclor 1242/LPCB and 22–39 % for Aroclor 1254/HPCB serum concentrations. We regard the cumulative exposure estimated with the JEM as a better estimate of PCB body burdens than serum concentrations quantified as Aroclor 1242/LPCB and Aroclor 1254/HPCB.     

PCB边角料的成分与热重-差热分析研究

在温度为380℃、N₂∶O₂=7∶3（体积比）的条件下,对PCB边角料进行的化学成分分析实验结果表明：4种PCB边角料中SiO₂+CaO+Al₂O₃大约在32%～38%之间,金属含量在22%～28%之间,其余为树脂,大约为45%左右;热重差热分析在氮气气氛、升温速率为20℃/min的条件下进行,其结果为：失重在12%～36%之间,热值在13～19 MJ/kg左右,失重主要发生在300～400℃之间,约占总失重的70%～90%,300℃以下质量基本上没有变化,400～1 200℃之间,质量约占10%～30%：并分析了TG-DTA曲线的影响因素,为工业回收废弃PCB提供了有价值的基础数据。     

PCBs fires: Correlation of chlorobenzene isomer and PCB homolog contents of PCB fluids with PCDD and PCDF contents of soot

PCBs, PCDDs, and PCDFs are subject to new regulations promulgated under the Toxic Substances Control Act and the Resource Conservation and Recovery Act. The finding of PCDDs and PCDFs in PCBs could restrict disposal options for PCBs. A review of major fire incidents in the U.S., indicates that PCDDs have been found only in the Binghamton, N.Y., transformer fire incident. Laboratory combustion studies further support PCDFs formation from PCBs and PCDDs from chlorobenzenes. No PCDDs were found in analyses of fluids from transformers involved in transformer fire incidents. PCDFs do not appear to increase in PCBs askarel fluids from normal usage in electrical equipment.     

PCB removal from contaminated dredged material

The purpose of this study was to evaluate the feasibility of decontaminating PCB contaminated sediment using land treatment technology. Five glass aquariums were set up to test the disappearance of polychlorinated biphenyls (PCBs) in dredged sediment under laboratory conditions that simulated photodegradation, biological transformation, and volatilization in dredged material confined disposal facilities (CDFs). A 40% decline in PCB concentration was achieved over a period of 5 months. Analysis of the variance in the data showed that periodic tilling produced a tangible effect on the disappearance of PCBs. However, the process or processes responsible for PCB disappearance could not be determined. PCB disappearance from the sediment was most likely caused by a combination of photolysis, volatilization, and biodegradation mechanisms rather than by any single process.     

Synthesis of C-labelled PCB methyl sulphones

Five methylsulphonyltetrachloro-(¹⁴C)biphenyls and three methylsulphonylpentachloro-(¹⁴C)biphenyls were synthesized, 3,4-Dichloro-(¹⁴C)aniline was reacted with 2,3- and 2,6-dichlorothioanisole and 2,4,5-trichloro-(¹⁴C)aniline with 2,5-dichlorothioanisole. The PCB methyl sulphides were oxidized with hydrogen peroxide to the corresponding sulphones.     

Fate of PCDF/PCB congeners and change of clinical symptoms in patients with Yusho PCB poisoning for 30 years

Two mass-food poisonings called Yusho and Yucheng occurred in Japan and Taiwan in 1968 and 1979, respectively. Blood samples from five Yusho patients and three Yucheng patients were collected several times from 1982 to 1998 and from 1980 to 1995, respectively, and analyzed for polychlorinated dibenzofurans (PCDF) and polychlorinated biphenyls (PCB) congeners. Fat base concentrations of 2,3,4,7,8-penta-CDF in the Yusho patients, which were responsible for about 70% of the dioxin toxicity, are estimated to be decreased from 60 ppb in 1969 to 800 ppt in 1997 with the median half-life of 2.9 years in the first 15 years after onset and 7.7 years in the next stage of 15 years. Typical Yusho symptoms of acneiform eruption, dermal pigmentation and increased eye discharge were very gradually recovered with lapse of several years. However, enzyme and/or hormone-mediated signs of high serum triglyceride, high serum thyroxin, immunoglobulin disorder and others are persistently maintained for 30 years.     

PCB concentrations in soil from central and southern Wales

Soil samples were collected from 84 locations in central and southern Wales. PCB concentrations ranged from 1.9 μg/kg to 1208 μg/kg with a mean of 86 μg/kg. with a mean and median of 11 μg/kg. Concentrations were highest in the southern, industrialised region, and decreased towards the northern boundary of the sampling area. The study was combined with a re-evaluation of an earlier survey of PCBs in British soils, to assess the significance of potential PCB emission sources impacting onto the sampling sites.     

Dioxin and dioxin-like PCB exposure of non-breastfed Dutch infants

The exposure of humans to PCDD/Fs (polychlorinated dibenzo-p-dioxins and dibenzofurans) and dioxin-like PCBs (dl-PCBs, i.e. polychlorinated non-ortho and mono-ortho biphenyls) occurs predominantly via the intake of food. Young children have a relatively high intake of these substances, due to their high food consumption per kilogram body weight. As the exposure of non-breastfed infants to these compounds has not been assessed before in The Netherlands, we studied the dietary intake of 17 PCDD/Fs and 11 dioxin-like PCBs in 188 Dutch non-breastfed infants between 4 and 13 months. The food intake of the infants was assessed by a 2-d food record. From these data PCDD/F and dioxin-like PCB intake was calculated using PCDD/F and dioxin-like PCB concentrations of food products sampled in 1998/1999 in The Netherlands. The long-term PCDD/F and dioxin-like PCB exposure of the infants was calculated using the statistical exposure model (STEM). For infants of 5 months the chronic exposure to PCDD/F and dioxin-like PCB was 1.1pg WHO-TEQ (toxic equivalents) per kilogram body weight (bw) per day (95th percentile: 1.7pg WHO-TEQ/kg bwxd), which mainly originated from infant formula and vegetables and increased to 2.3pg WHO-TEQ/kg bwxd (95th percentile 3.7pg WHO-TEQ/kg bwxd) for infants just over 1 year old eating the same food as their parents. The percentage of formula-fed infants with an exposure exceeding the TDI of 2pg WHO-TEQ/kg bwxd was 5% at 5 months, 49% at 9 months and 64% at 12 months.