Sorption and desorption of cadmium by different fractions of biosolids-amended soils

To evaluate the importance of both the inorganic and organic fractions in biosolids on Cd chemistry, a series of Cd sorption and desorption batch experiments (at pH 5.5) were conducted on different fractions of soils from a long-term field experimental site. The slope of the Cd sorption isotherm increased with rate of biosolids and was different for the different biosolids. Removal of organic carbon (OC) reduced the slope of the Cd sorption isotherm but did not account for the observed differences between biosolids-amended soils and a control soil, indicating that the increased adsorption associated with biosolids application was not limited to the increased OC from the addition of biosolids. Removal of both OC and Fe/Mn further reduced the slopes of Cd sorption isotherms and the sorption isotherm of the biosolids-amended soil was the same as that of the control, indicating both OC and Fe/Mn fractions added by the biosolids were important to the increased sorption observed for the biosolids-amended soil samples. Desorption experiments failed to remove from 60 to 90% of the sorbed Cd. This "apparent hysteresis" was higher for biosolids-amended soil than the control soil. Removal of both OC and Fe/Mn fractions was more effective in removing the observed differences between the biosolids-amended soil and the control than either alone. Results show that Cd added to biosolids-amended soil behaves differently than Cd added to soils without biosolids and support the hypothesis that the addition of Fe and Mn in the biosolids increased the retention of Cd in biosolids-amended soils.     

Use of constructed wetland for the removal of heavy metals from industrial wastewater

This study was conducted to investigate the effectiveness of a continuous free surface flow wetland for removal of heavy metals from industrial wastewater, in Gadoon Amazai Industrial Estate (GAIE), Swabi, Pakistan. Industrial wastewater samples were collected from the in-let, out-let and all cells of the constructed wetland (CW) and analyzed for heavy metals such as lead (Pb), cadmium (Cd), iron (Fe), nickel (Ni), chromium (Cr) and copper (Cu) using standard methods. Similarly, samples of aquatic macrophytes and sediments were also analyzed for selected heavy metals. Results indicate that the removal efficiencies of the CW for Pb, Cd, Fe, Ni, Cr, and Cu were 50%, 91.9%, 74.1%, 40.9%, 89%, and 48.3%, respectively. Furthermore, the performance of the CW was efficient enough to remove the heavy metals, particularly Cd, Fe, and Cu, from the industrial wastewater fed to it. However, it is suggested that the metal removal efficiency of the CW can be further enhanced by using proper management of vegetation and area expansion of the present CW.     

Fate of biosolids trace metals in a dryland wheat agroecosystem

Biosolids land application for beneficial reuse applies varying amounts of trace metals to soils. Measuring plant-available or total soil metals is typically performed to ensure environmental protection, but these techniques do not quantify which soil phases play important roles in terms of metal release or attenuation. This study assessed the distribution of Cd, Cr, Cu, Mo, Ni, Pb, and Zn associated with soluble/exchangeable, specifically adsorbed/carbonate-bound, amorphous Mn hydroxyoxide-bound, amorphous Fe hydroxyoxide-bound, organically complexed, and residual inorganic phases. Biosolids were applied every 2 yr from 1982 to 2002 (except in 1998) at rates of 0, 6.7, 13.4, 26.8, and 40.3 dry Mg biosolids ha(-)(1) to 3.6- by 17.1-m plots. In 2003, 0- to 20-cm and 20- to 60-cm soil depths were collected and subjected to 4 mol L(-1) HNO(3) digestion and sequential extraction. Trace metals were concentrated in the 0- to 20-cm depth, with no significant observable downward movement using 4 mol L(-1) HNO(3) or sequential extraction. The sequential extraction showed nearly all measurable Cd present in relatively mobile forms and Cr, Cu, Mo, Ni, Pb, and Zn present in more resistant phases. Biosolids application did not affect Cd or Cr fractionation but did increase relatively immobile Cu, Mo, and Zn phases and relatively mobile Cu, Ni, and Pb pools. The mobile phases have not contributed to significant downward metal movement. Long-term, repeated biosolids applications at rates considered several times greater than agronomic levels should not significantly contribute to downward metal transport and ground water contamination for soils under similar climatic conditions, agronomic practices, and histories.     

A washing procedure to mobilize mixed contaminants from soil: II. Heavy metals

We conducted a laboratory study to assess the efficiency of nonionic and anionic surfactants in combination with a sparing quantity of ethylenediaminetetraacetate (EDTA) to simultaneously extract heavy metals (HMs) and polychlorinated biphenyl (PCB) compounds from a field-contaminated soil. A soil wash that mobilized both HMs and PCBs was combined with back-extraction with hexane to remove PCBs from the aqueous wash. The aqueous washing suspension was then regenerated by precipitation of the HMs induced by corrosion and hydrolysis of zero-valent Mg to provide a cleaned soil and innocuous extract. Finally, the washing suspension was recycled twice to mobilize more contaminants from the soil particulate fraction. After ultrasonic equilibration, EDTA in admixture with a nonionic surfactant did not appreciably change the efficiency of mobilization of most heavy metals (Al, Cd, Cr, Fe Mn, Ni, and Zn), but did increase the recovery of Cu and Pb. The release of EDTA from HM complexes was efficient for most metals (99%) but was influenced by the chemical characteristics of the surfactant. The EDTA recovery (62-65%) after three cycles of soil washing, hexane back-extraction, and Mg(0) treatment was similar for all reagent combinations. In toto, these studies demonstrate that after treatment with ultrasound, selected heavy metals can be coextracted efficiently from soil with a single washing suspension containing EDTA and a nonionic surfactant.     

Copper availability in seven Israeli soils incubated with and without biosolids

Land application is becoming a preferred option for disposal of sewage sludge (biosolids) from wastewater treatment plants. However, it creates potential risks due to the heavy metal contents of these materials, with copper (Cu) being of chief concern. The long-term fate of biosolid metals applied to agricultural soils is not well understood, particularly in the soils of the Middle East. This investigation was conducted to determine whether the availability of Cu changes with time in biosolid-amended and nonamended soils from Israel. Seven soils, typifying the span of properties and formation environments encountered in Israel, were incubated with and without biosolids for 7 yr, and changes in organic carbon (OC) content and labile Cu concentration were determined. Isotopic exchange techniques, using 64Cu, and ion activity measurements, using a Cu2+ ion selective electrode, revealed that the available Cu concentration remained relatively low and stable over the 7-yr incubation. This was despite substantial reductions in OC. This study shows that, with regard to Cu, application of such biosolids to these soils at rates of up to 250 Mg ha(-1) does not pose a threat to the environment in the short to medium term.     

Distribution of heavy metals in sediments of Igbede, Ojo and Ojora rivers of Lagos, Nigeria

The distribution of some heavy metals, namely Cd, Pb, Zn, Fe, Cu, Cr and Mn in epipellic sediments of Igbede, Ojo and Ojora rivers of Lagos was studied weekly in the early summer (November) of 2003. The levels of selected trace metals were determined using Atomic Absorption Spectrophotometer (UNICAM 969 AAS SOLAR). Trends in heavy metal burdens in the sediments revealed weekly variations in all the rivers assessed. Statistical analyses also showed different mean levels of trace metals in the aquatic environments, the distribution of which followed the sequence Fe > Zn > Mn > Pb > Cu > Cr > Cd, Fe > Zn > Cu > Mn > Pb > Cr > Cd and Fe > Zn > Mn > Cu > Cr > Pb > Cd in Igbede, Ojo and Ojora rivers respectively. Fe recorded the highest concentration levels (1,582.95 ± 96.57 μ g/g–1,910.34 ± 723.19 μ g/g) in all the sediments investigated while the Cd levels (0.06 ± 0.10 μ g/g–0.47 ± 0.36 μ g/g) were the lowest. Expectedly, trace metal concentrations in fine grain muddy sediments of the Igbede and Ojo coastline were much higher than those of Ojora which consist of coarse and sandy deposits covering the near shore area. Generally, the results obtained fell within tolerable limits stipulated by World Health Organization (WHO).     

Photosynthesis, chlorophyll integrity, and spectral reflectance in lichens exposed to air pollution

The major objective of the present study was to identify the relationship of physiologial parameters of the photosynthetic system with the elemental content of the lichen Ramalina lacera (With.) J.R. Laund. Thalli of R. lacera were collected in an unpolluted site and transplanted in a national park and an industrial region in Israel for 8 mo. Analyses of photosynthetic activity, chlorophyll integrity, spectral reflectance, and amount of 11 metals were performed after this period of exposure. The normalized difference vegetation index (NDVI), indicative of the spectral reflectance response of the thallus, correlated with photosynthetic rate and chlorophyll and K content and correlated inversely with amounts of Ba, Cr, Cu, and Ni. The NDVI appears to enable the detection of early signs of pollutant-induced stress before changes in other physiological parameters become apparent. Elevated amounts of Cr, Cu, Fe, Mn, Ni, and Zn in lichens transplanted to an industrial area and the correlation of Mn and Ni, Mn and V, Ni and V, Fe and Mn, Fe and V, and Fe and Zn point for the greater part to metal processing in a steel smelter. Correlations of Cr and Ni, Cu and Ni, Zn and Cu, Cu and Mn, and Zn and Ni could be related to metal processing in the industrial area but indicate also vehicular activity as a possible originator.     

Biosolids decomposition after surface applications in west Texas

In a semiarid environment, climate is a critical factor in the decomposition of surface-applied biosolids. This study examined the effect of 2- to 7-yr exposure times on the composition of single applications of New York, NY biosolids in western Texas. Exposure time effects on organic matter, N, P, S, Cu, Cr, Pb, Hg, and Zn were studied near Sierra Blanca, TX. Due to organic matter decomposition, total organic C decreased from 340 g kg(-1) in fresh biosolids to 180 g kg(-1) in biosolids after 82 mo of exposure, whereas the inorganic ash content of the biosolids increased from 339 to 600 g kg(-1). Total N decreased from 50 to 10 g N kg(-1) and total S decreased from 12 to 6 g S kg(-1). Bicarbonate-available P in the biosolids decreased from 0.9 to 0.2 g kg(-1). Successive H2O extractions yielded soluble P concentrations consistent with dicalcium phosphate (dical) for fresh biosolids and tricalcium phosphate (trical) for biosolids exposed for 59 months or more. Sparingly soluble phosphates, such as dical and trical, potentially yield > 0.5 mg P L(-1) in runoff waters for extended periods after biosolids applications, especially after multiple applications. Selective dissolution of the biosolids indicated that as much as 66 to 78% of P exists as iron phosphates, 16 to 21% as Fe oxides, and 5 to 12% as insoluble Ca phosphates. Chemical analyses of ash samples suggest that Cu and Zn have been lost from biosolids through leaching or runoff and no losses of Pb, Cr, or Hg have occurred since application.     

Phytoextraction of heavy metals by willows growing in biosolids under field conditions

Biosolids produced by sewage treatment facilities can exceed guideline thresholds for contaminant elements. Phytoextraction is one technique with the potential to reduce these elements allowing reuse of the biosolids as a soil amendment. In this field trial, cuttings of seven species/cultivars of Salix(willows) were planted directly into soil and into biosolids to identify their suitability for decontaminating biosolids. Trees were irrigated and harvested each year for three consecutive years. Harvested biomass was weighed and analyzed for the contaminant elements: As, Cd, Cu, Cr, Hg, Pb, Ni, and Zn. All Salix cultivars, except S. chilensis, growing in soils produced 10 to 20 t ha(-1) of biomass, whereas most Salix cultivars growing in biosolids produced significantly less biomass (<6 t ha(-1)). Salix matsudana (30 t ha(-1)) and S. × reichardtii A. Kerner (18 t ha(-1)) had similar aboveground biomass production in both soil and biosolids. These were also the most successful cultivars in extracting metals from biosolids, driven by superior biomass increases and not high tissue concentrations. The willows were effectual in extracting the most soluble/exchangeable metals (Cd, 0.18; Ni, 0.40; and Zn, 11.66 kg ha(-1)), whereas Cr and Cu were extracted to a lesser degree (0.02 and 0.11 kg ha(-1)). Low bioavailable elements, As, Hg, and Pb, were not detectable in any of the aboveground biomass of the willows.     

Solubility of phosphorus and heavy metals in potting media amended with yard waste-biosolids compost

The potential risk of surface and ground water contamination by phosphorus (P) and heavy metals leached from compost-based containerized media has become an environmental concern. Solubility and fractionation of P and heavy metals were evaluated in media containing 0, 25, 50, 75, or 100% compost derived from biosolids and yard trimmings for potential impacts on the environment. As compost proportion in peat-based media increased from 0 to 100%, concentrations of total P, Cd, Cu, Ni, Pb, Zn, and Mn in the media increased whereas concentrations of total Co and Cr decreased. Except for Cu, all heavy metals in the water-soluble fraction decreased with increasing compost proportion in the media, because of higher Fe, Al, and Ca concentrations and pH values of the composts than the peat. When the media pH is controlled and maintained at normal range of plant growth (5.5-6.5), leaching of the heavy metals is minimal. Incorporation of compost to the peat-based media also decreased the proportion of total P that was water-soluble. However, concentrations of bioavailable inorganic phosphorus (NaHCO3-IP), readily mineralizable organic phosphorus (NaHCO3-OP), potentially bioavailable inorganic phosphorus (NaOH-IP), and potentially bioavailable organic phosphorus (NaOH-OP) were still higher in the media amended with compost because of higher total P concentration in the compost. Further study is needed to verify if less or no topdressing of chemical P fertilizer should be applied to the compost-amended media to minimize P effect on the environment when compost-amended potting media are used for nursery or greenhouse crop production systems.     

Effect of biosolids processing on lead bioavailability in an urban soil

The potential for biosolids products to reduce Pb availability in soil was tested on a high Pb urban soil with biosolids from a treatment plant that used different processing technologies. High Fe biosolids compost and high Fe + lime biosolids compost from other treatment plants were also tested. Amendments were added to a Pb-contaminated soil (2000 mg kg(-1) Pb) at 100 g kg(-1) soil and incubated for 30 d. Reductions in Pb bioavailability were evaluated with both in vivo and in vitro procedures. The in vivo study entailed feeding a mixture of the Pb-contaminated soil and AIN93G Basal Mix to weanling rats. Three variations of an in vitro procedure were performed as well as conventional soil extracts [diethylenetriaminepentaacetic acid (DTPA) and Ca(NO3)2] and sequential extraction. Addition of the high Fe compost reduced the bioavailability of soil Pb (in both in vivo and in vitro studies) by 37 and 43%, respectively. Three of the four compost materials tested reduced Pb bioavailability more than 20%. The rapid in vitro (pH 2.3) data had the best correlation with the in vivo bone results (R = 0.9). In the sequential extract, changes in partitioning of Pb to Fe and Mn oxide fractions appeared to reflect the changes in in vivo Pb bioavailability. Conventional extracts showed no changes in metal availability. These results indicate that addition of 100 g kg(-1) of high Fe and Mn biosolids composts effectively reduced Pb availability in a high Pb urban soil.     

Assessment of the Effectiveness of Environmental Dredging in South Lake,China

Environmental dredging is a primary remedial option for removal of the contaminated material from aquatic environment. Of primary concern in environmental dredging is the effectiveness of the intended sediment removal. A 5-year field monitoring study was conducted to assess the effectiveness of the environmental dredging in South Lake, China. The concentrations of total nitrogen (TN), total phosphors, and heavy metals (Zn, Pb, Cd, Cu, Cr, Ni, Hg, and As) before and after dredging in sediment were determined and compared. Multiple ecological risk indices were employed to assess the contamination of heavy metals before and after dredging. Our results showed that the total phosphorus levels reduced 42% after dredging. Similar changes for Hg, Zn, As Pb, Cd, Cu, Cr, and Ni were observed, with reduction percentages of 97.0, 93.1, 82.6, 63.9, 52.7, 50.1, 32.0, and 23.6, respectively, and the quality of sediment improved based on the criterion of Sediment Quality Guidelines by USEPA and contamination degree values (C_d) decreased significantly (paired t-test, p < 0.05). Unexpectedly, the TN increased 49% after dredging compared to before dredging. Findings from the study demonstrated that the environmental dredging was an effective mechanism for removal of total phosphorus and heavy metals from South Lake. Nevertheless, the dredging was ineffective to remove total nitrogen from sediment. We conclude that the reason for the observed increase in TN after dredging was likely ammonia release from the sediment impairing the dredging effectiveness.     

Recovery and distribution of biosolids-derived trace metals in a clay loam soil

The long-term mobility of trace metals has been cited as a potential hazard by critics of EPA 503 rule governing the land application of biosolids. The objectives of this study were to assess the accumulation of Cu, Ni, Cd, and Zn within the soil profile; the distribution of exchangeable, specifically adsorbed, organic, and oxide fractions of each metal; and mass balance of Cu, Ni, and Zn 17 yr after a single biosolids application. Biosolids were applied to 1.5- x 2.3-m confined plots of a Davidson clay loam (fine, kaolinitic, thermic Rhodic Kandiudult) in 1984 at 0, 42, 84, 126, 168, and 210 Mg ha(-1). The highest biosolids application supplied 4.5, 750, 43, and 600 kg ha(-1) of Cd, Cu, Ni, and Zn, respectively. Soils were sampled to a depth of 0.9 m and sectioned into 5-cm increments after separating the Ap horizon. Total (EPA-3050B), bioavailable (Mehlich-I), sequential extraction, and dispersible clay analyses were performed on samples from the control, 126 Mg ha(-1), and 210 Mg ha(-1) treatments. Trace metals are still concentrated in the top 0.2 m with slight enrichment down to 0.3 m. More than 85% of applied Cu, Ni, and Zn are still found in the topsoil where biosolids was incorporated and 95% or more of the applied metals were accounted for with mass balance calculations. Mehlich-I results showed a slight increase in metal concentration down to 0.35 m. Biosolids application increased the concentrations of trace metals in all the extracted fractions. The major portions of Cu, Zn, and Ni are associated with the metal-oxides fraction. Dispersible clay content and water-soluble metal contents were low and except for water-soluble Zn they were not affected by biosolids application. Results from this study showed that 17 yr after biosolids application there was negligible movement of trace metals through the soil profile and consequently there is little risk of contamination of ground water at this site.     

Mobilization of trace metals and inorganic compounds during resuspension of anoxic sediments from Trepangier Bayou, Louisiana

The release of trace metals (Mn, Ni, Co, Cu, Zn, Pb, and Cd) and inorganic compounds (As) from initially anoxic Trepangier Bayou sediments, Louisiana and the sources of the released metals were investigated. After 1 to 2 d aeration, significant amounts of trace metals (Mn, Zn, Cd, Ni, and Co) were released to the aqueous phase with increased acidity, primarily due to the oxidation of acid-volatile sulfide and ferrous iron and iron sulfide minerals. The addition of a bacterial inhibitor, NaN,, to the Trepangier sediment during resuspension inhibited metal release, suggesting that microbial catalysis can regulate metal mobilization during sediment resuspension. In a well buffered system, oxidation of iron sulfides alone did not appear to induce trace metal release. Moreover, when Trepangier sediment was resuspended in anoxic conditions at neutral pH, <1% of the trace metal content was released, whereas a significant release of metal was observed under acidic anoxic conditions. Although oxidation of iron sulfide minerals is an essential prerequisite for the release of Zn, Co, Cd, and Ni, carbonates and oxides also play a role. The trace metals and inorganic compounds investigated could be classified into three groups according to their release characteristics: (i) Mn, Zn, Cd, Ni, and Co; (ii) Fe, Pb, and As; and (iii) Cu. The groupings appeared to depend on the sources of compounds and their relative affinity, after oxidation, to iron oxyhydroxides or organic matter.     

Metal distribution and stability in constructed wetland sediment

The A-01 wetland treatment system (WTS) is a surface flow wetland planted with giant bulrush [Schoenoplectus californicus (C.A. Mey.) Palla] that is designed to remove Cu and other metals from the A-01 National Pollution Discharge Elimination System (NPDES) effluent at the Savannah River Site near Aiken, SC. Copper, Zn, and Pb concentrations in water were usually reduced 60 to 80% by passage through the treatment system. The Cu concentrations in the wetland sediments increased from about 4 to 205 and 796 mg kg(-1), respectively, in the organic and floc sediment layers in cell 4A over a 5-yr period. Metal concentrations were higher in the two top layers of sediment (i.e., the floc and organic layers) than in the deeper inorganic layers. Sequential extraction was used to evaluate remobilization and retention of Cu, Pb, Zn, Mn, and Fe in the wetland sediment. Metal remobilization was determined by the potentially mobile fraction (PMF) and metal retention by the recalcitrant factor (RF). The PMF values were high in the floc layer but comparatively low in the organic and inorganic layers. High RF values for Cu, Zn, and Pb in the organic and inorganic layers indicated that these metals were strongly bound in the sediment. The RF values for Mn were lower than for the other elements especially in the floc layer, indicating low retention or binding capacity. Retention of contaminants was also evaluated by distribution coefficient (Kd) values. Distribution coefficient (Kd) values were lower for Cu and Zn than for Pb, indicating a smaller exchangeable fraction for Pb.     

Removal of heavy metals in rinsing wastewater from plating factory by adsorption with economical viable materials

The removal of heavy metals from plating factory wastewater with economical materials was investigated by the column method. Montmorillonite, kaolin, tobermorite, magnetite, silica gel and alumina were used as the economical adsorbents to wastewater containing Cd(II), Cr(VI), Cu(II) and Pb(II). This removal method of heavy metals proved highly effective as removal efficiency tended to increase with increasing pH and decrease with increasing metal concentration. The removal percentages by adsorption onto montmorillonite, tobermorite, magnetite, and silica gel showed high values for all metals. From the results for the heat of adsorption, the adsorption process in the present study might be chemisorption. The proposed method was successfully applied to the removal of Cd(II), Cr(VI) and Cu(II) in rinsing wastewater from plating factory in Nagoya City, Aichi Prefecture, Japan. Since the economical adsorbents used can be obtained commercially because they are easily synthesized, the wastewater treatment system developed is rapid, simple and cheap for the removal of heavy metals.     

Heavy metal content and distribution in surface sediments of the Seyhan River, Turkey

Chemical fractionation of seven heavy metals (Cd, Cr, Cu, Mn, Ni, Pb and Zn) was studied using a modified three-step sequential procedure to assess their impacts in the sediments of the Seyhan River, Turkey. Samples were collected from six representative stations in two campaigns in October 2009 and June 2010, which correspond to the wet and dry seasons, respectively. The total metal concentrations in the sediments demonstrated different distribution patterns at the various stations. Cadmium was the only metal that was below detection at all stations during both sampling periods. Metal fractionation showed that, except for Mn and Pb, the majority of metals were found in the residual fraction regardless of sampling time, indicating that these metals were strongly bound to the sediments. The potential mobility of the metals (non-residual fractions) is reflected in the following ranking: Pb > Mn > Zn > Cu > Ni > Cr in October 2009 and Mn > Pb > Zn > Cu > Ni > Cr in June 2010. The second highest proportion of metals was bound to organic matter/sulfides, originating primarily from anthropogenic activities. Non-residual metal fractions for all stations were highest in June 2010, which may be linked to higher organic matter concentrations in the sediment samples with 1.40% and 15.1% in October 2009 and June 2010, respectively. Potential sediment toxicity was evaluated using the Risk Assessment Code (RAC). Based on RAC classification, Cd and Cr pose no risk, Cu and Ni pose low risk, Pb and Zn were classified as medium risk metals, while the environmental risk from Mn was high. In addition, based on the sediment quality guidelines (SQG), the Seyhan River can be classified as a river with no, to moderate, toxicological risks, based on total metal concentrations.     

Bacterial pretreatment enhances removal of heavy metals during treatment of post-methanated distillery effluent by Typha angustata L

A combination of bacterial pretreatment followed by free water surface flow through wetland plants was investigated to determine its effect on removal of heavy metals in bioremediation of post-methanated distillery effluent (PMDE). The bacterial pretreatment was intended to transform the metal complexes and organic pollutants into simpler, biologically assimilable molecules. The 10% and 30% v/v concentrations of PMDE favored luxuriant bacterial growth; the 50% concentration supported less growth, whereas the undiluted effluent (i.e., 100%) supported very little bacterial growth. The use of bacterial pretreatment combined with the constructed wetland system greatly increase the overall bioaccumulation of all heavy metals by the plants compared with the control treatment. However, the integration of bacterial pretreatment of PMDE with the Typha angustata resulted in enhanced removal of Cd (34.02–61.50% increase), Cr (35.90–57.60% increase), Cu (32.88–54.22% increase), Fe (32.50–51.26% increase), Mn (35.99–82.85% increase), Ni (35.85–59.24% increase), Pb (33.45–59.51% increase) and Zn (31.95–53.70% increase) compared with a control that lacked this pretreatment. In addition to the bioaccumulation of these heavy metals, several physico-chemical parameters also improved at the 30% effluent concentration: color, BOD, COD, phenol and total nitrogen decreased by 98.33%, 98.89%, 98.50%, 93.75% and 82.39%, respectively, after 7 days of free water surface flow treatment. The results suggest that bacterial pretreatment of PMDE, integrated with phytoremediation will improve the treatment process of PMDE and promote safer disposal of this waste.     

Understanding heavy metal and suspended solids relationships in urban stormwater using simulated rainfall

Urban stormwater from simulated rainfall on three different landuses in Queensland State, Australia (residential, industrial, commercial) was analysed for heavy metals and physico-chemical parameters such as Dissolved Organic Carbon (DOC) and Total Suspended Solids (TSS). Rainfall events were simulated using a specially designed rainfall simulator for paved surfaces. Event mean concentration samples were separated into five different particle sizes and analysed individually for eight metal elements (Zn, Fe, Cr, Cd, Cu, Al, Mn and Pb). Multivariate data analysis was carried out for the data thus generated. It was found that DOC and TSS influence the distribution of the metals in the different particle size classes. Zn was correlated with DOC at all three sites. Similarly, Pb, Fe and Al were correlated with TSS at all sites. The distribution of Cu was found to vary between the three sites, whilst Cd concentrations were too low to assess any relationships with other parameters. No correlation between Electrical Conductivity (EC), pH and heavy metals was found at the three sites. The identification of physico-chemical parameters influencing the distribution process kinetics of heavy metals in urban stormwater will significantly enhance the efficiency of urban stormwater management systems.     

Utilization of pulp and paper industrial wastes to remove heavy metals from metal finishing wastewater

Two pulp and paper industrial wastes, lime mud (LM) and recovery boiler ash (RB), have low moisture contents, low heavy metal contaminations and contain various carbonate compounds which contribute to a high pH. Metal finishing wastewater (MF-WW) has a low pH, high levels of TDS and high contaminations from Cr, Cu, Pb and Zn. The heavy metals from MF-WW were removed by sorption and precipitation mechanisms. LM gave better results in removing heavy metals from MF-WW than RB. At a reaction time of 45 min, the maximum removal efficiencies for Cr (93%) and Cu (99%) were obtained at 110 g L⁻¹ of LM, but at 80 g L⁻¹ for Pb (96%) and Zn (99%). Treatment with LM gives a higher sludge volume than with RB. However, the leachability of heavy metals from LM is lower. Leachability of heavy metals in the sediment for all selected treatment conditions is within government standards.