Modeling the non-point source pollution risks by combing pollutant sources,precipitation, and landscape structure

Traditional models of nutrient simulation usually focus on the pollutant sources and precipitation, lacking the quantification of landscape structure. We developed a new prediction model of pollution risks by combing pollutant sources, precipitation, and landscape structure, which was defined as the source-precipitation-landscape model (SPLM). The SPLM was applied to simulate the non-point source (NPS) total nitrogen (TN) exports in one of the largest river basins in China (the Haihe River Basin, HRB). TN concentrations of 35 sampling catchments in 2013 were used to test the accuracy of the SPLM. Simulated results showed that (1) the SPLM had a relative high accuracy in the simulation of NPS TN export and intensity, especially for TN intensity. (2) The mean TN export and intensity of all the 1578 catchments in the HRB were 441.97 t and 2.08 t/km², respectively. (3) The TN export intensities differed greatly among the sub-basins in the HRB, ranging from 0.64 to 6.81 t/km². On the whole, the TN export intensities of the plain sub-basins (e.g., the Tuhaimajia River, the Heilonggang River, and the Beisihe River) were much higher than those of mountainous sub-basins (e.g., the Yongding River, the Beisanhe River, and the Luanhe River). (4) The contributions to TN exports, from high to low, were land use (38.82%), livestock husbandry (33.57%), and rural population (27.61%). Among all the ten pollution sources, arable land (30.87%), rural population (27.61%), and large livestock (17.73%) had the top three contributions to TN exports. This study provides a feasible tool for policymakers and administrators to develop workable management measures for the mitigation of NPS pollution. This SPLM can be extended to other regions in a rapid urbanization context.

     

Compilation and application of a primary PM2.5 emissions inventory with high sectoral resolution in Japan

To elucidate the macro-structure of the PM_2.5 emissions generated by Japan's economic activities, this paper presents an emission inventory of primary particles of PM_2.5 with high sectoral resolution based on the Japanese Input–Output Tables, comprising some 400 sectors. These primary PM_2.5 emissions were estimated by multiplying the estimated energy consumption associated with each fuel type by a PM₁₀ emission factor incorporating the technological level of dust collection in each sector and the mass ratio of PM_2.5 to PM₁₀. Non-energy emissions from agricultural open burning were also determined. Total PM_2.5 emissions in 2000 were 252 kt, 49% of which were due to mobile emission sources. Changes in total PM_2.5 emissions between 1990 and 2000 were also calculated. This showed that a substantial increase in energy sector emissions due to rising coal consumption was offset by a sharp decline in emissions from road vehicles and shipping vessels, resulting in an overall decrease in total emissions. In addition, the emissions induced by economic demand in each sector were quantified by means of input–output analysis, which revealed that demand for construction, foods and communications and services constituted the principal causes of real domestic emissions. An assessment of sectoral contributions to PM_2.5 emissions that takes into account the effects of human exposure, expressed as external costs, suggests that the contribution of transportation is greater than indicated on the grounds of direct emissions alone.     

Polychlorinated biphenyls (PCBs) in marine fishes from China: Levels, distribution and risk assessment

Muscle tissues of large yellow croakers (Pseudosciaena crocea) and sliver pomfret (Pampus argenteus) from nine coastal cities of East China including Dalian, Tianjin, Qingdao, Shanghai, Zhoushan, Wenzhou, Fuzhou, Quanzhou and Xiamen were analyzed for polychlorinated biphenyl (PCB) concentrations. Thirty-six PCB congeners were quantified in the fishes, of which 11 congeners were dioxin-like PCBs. The total PCB concentrations of the present study were at the low end of the global range, which may be related to the smaller usage and shorter consumption history of PCBs in China. PCBs 18, 29, 52, 66, 101, 104, 138, 153, 180 and 194 were the major constituents found in the fish samples. Regression analysis showed a strong positive correlation (R² = 0.800; p < 0.001) between total dioxin-like PCBs and total PCB concentrations, and that total PCB concentrations explain 80% of the variability in total dioxin-like PCB concentrations. Among the species investigated, significantly higher concentrations of total PCBs were found in croakers than in pomfrets, which may be attributed to their different feeding and living habits. No significant difference in total PCB concentrations among the cities was observed; principal component analysis (PCA) of PCB profiles indicated that PCB pollution came from similar sources in the sampling areas and that there may be other PCB sources in Dalian and Wenzhou. The calculated carcinogenic risks (CRs) from the two species based on a low consumption group and high consumption group were all greater than 10⁻⁶, suggesting that daily exposure to dioxin-like PCBs via fish consumption results in a lifetime cancer risk of greater than one in one million. In contrast, the hazard quotients (HQs) of noncancer risks were all less than unity.     

Paradigm changes in freshwater aquaculture practices in China: Moving towards achieving environmental integrity and sustainability

Contribution of fisheries and aquaculture to global food security is linked to increased fish consumption. Projections indicate that an additional 30–40 million tonnes of fish will be required by 2030. China leads global aquaculture production accounting for 60% in volume and 45% in value. Many changes in the Chinese aquaculture sector are occurring to strive towards attaining environmental integrity and prudent use of resources. We focus on changes introduced in freshwater aquaculture developments in China, the main source of food fish supplies. We bring forth evidence in support of the contention that Chinese freshwater aquaculture sector has introduced major paradigm changes such as prohibition of fertilisation in large water bodies, introduction of stringent standards on nutrients in effluent and encouragement of practices that strip nutrients among others, which will facilitate long-term sustainability of the sector.     

2种典型餐厨垃圾资源化处理工艺的环境影响分析

为了评估餐厨垃圾资源化处理工艺对环境的影响,运用生命周期评价的方法,比较了2种典型的资源化处理工艺——好氧堆肥和湿热处理对环境的影响。结果表明,2种餐厨垃圾资源化处理工艺对全球变暖、生态毒性、酸化和富营养化的影响各有不同。其中,好氧堆肥对全球变暖的贡献较大,碳排放为337.7 kg CO_2eq./t。湿热处理为163.1 kg CO_2eq./t。在环境影响负荷方面,湿热处理工艺中的高能耗加重了毒性的影响。但由于其对环境的酸化、富营养化的不利影响较小,湿热处理的环境影响负荷总值是好氧堆肥的62.5%。总体上,湿热处理是一种对环境影响较小的餐厨垃圾处理工艺。     

Dissolved phosphorus transport from soil to surface water in catchments with different land use

Diffuse phosphorus (P) export from agricultural land to surface waters is a significant environmental problem. It is critical to determine the natural background P losses from diffuse sources, but their identification and quantification is difficult. In this study, three headwater catchments with differing land use (arable, pasture and forest) were monitored for 3 years to quantify exports of dissolved (<0.45 µm) reactive P and total dissolved P. Mean total P exports from the arable catchment ranged between 0.08 and 0.28 kg ha^?1 year^?1. Compared with the reference condition (forest), arable land and pasture exported up to 11-fold more dissolved P. The contribution of dissolved (<0.45 µm) unreactive P was low to negligible in every catchment. Agricultural practices can exert large pressures on surface waters that are controlled by hydrological factors. Adapting policy to cope with these factors is needed for lowering these pressures in the future.     

A review of the export of carbon in river water: fluxes and processes

This review summarizes data on exports of carbon from a large number of temperate and boreal catchments in North America, Europe and New Zealand. Organic carbon losses, usually dominated by dissolved organic matter, show relatively little variation, most catchments exporting between 10 and 100 kg C ha(-1) yr(-1). Inorganic carbon exports occur at a similar rate. However, a lack of information on the flux of particulate organic carbon and dissolved CO2 is highlighted, particularly for rivers in Europe. Processes regulating the flux of organic carbon to streams and its subsequent fate in-stream are reviewed, along with the effects of land use and acidification on these processes. The size of the global riverine flux of carbon in relation to the global carbon cycle and the possible effects of environmental change on the export of carbon in rivers are considered.     

The relationship between renewable energy consumption,carbon emissions,output, and export in industrial and agricultural sectors: evidence from China

Environmental Science and Pollution Research - This paper examines the long-term and short-term relationships between renewable energy consumption, output and export, and CO2 emissions in China...     

The influence of biomass energy consumption on CO<Subscript>2</Subscript> emissions: a wavelet coherence approach

In terms of today, one may argue, throughout observations from energy literature papers, that (i) one of the main contributors of the global warming is carbon dioxide emissions, (ii) the fossil fuel energy usage greatly contributes to the carbon dioxide emissions, and (iii) the simulations from energy models attract the attention of policy makers to renewable energy as alternative energy source to mitigate the carbon dioxide emissions. Although there appears to be intensive renewable energy works in the related literature regarding renewables’ efficiency/impact on environmental quality, a researcher might still need to follow further studies to review the significance of renewables in the environment since (i) the existing seminal papers employ time series models and/or panel data models or some other statistical observation to detect the role of renewables in the environment and (ii) existing papers consider mostly aggregated renewable energy source rather than examining the major component(s) of aggregated renewables. This paper attempted to examine clearly the impact of biomass on carbon dioxide emissions in detail through time series and frequency analyses. Hence, the paper follows wavelet coherence analyses. The data covers the US monthly observations ranging from 1984:1 to 2015 for the variables of total energy carbon dioxide emissions, biomass energy consumption, coal consumption, petroleum consumption, and natural gas consumption. The paper thus, throughout wavelet coherence and wavelet partial coherence analyses, observes frequency properties as well as time series properties of relevant variables to reveal the possible significant influence of biomass usage on the emissions in the USA in both the short-term and the long-term cycles. The paper also reveals, finally, that the biomass consumption mitigates CO₂ emissions in the long run cycles after the year 2005 in the USA.     

Black carbon emissions in China

Black carbon (BC) is an important aerosol species because of its global and regional influence on radiative forcing and its local effects on the environment and human health. We have estimated the emissions of BC in China, where roughly one-fourth of global anthropogenic emissions is believed to originate. China's high rates of usage of coal and biofuels are primarily responsible for high BC emissions. This paper pays particular attention to the application of appropriate emission factors for China and the attenuation of these emissions where control devices are used. Nevertheless, because of the high degree of uncertainty associated with BC emission factors, we provide ranges of uncertainty for our emission estimates, which are approximately a factor of eight. In our central case, we calculate that BC emissions in China in 1995 were 1342 Gg, about 83% being generated by the residential combustion of coal and biofuels. We estimate that BC emissions could fall to 1224 Gg by 2020. This 9% decrease in BC emissions can be contrasted with the expected increase of 50% in energy use; the reduction will be obtained because of a transition to more advanced technology, including greater use of coal briquettes in place of raw coal in cities and towns. The increased use of diesel vehicles in the future will result in a greater share of the transport sector in total BC emissions. Spatially, BC emissions are predominantly distributed in an east–west swath across China's heartland, where the rural use of coal and biofuels for cooking and heating is widespread. This is in contrast to the emissions of most other anthropogenically derived air pollutants, which are closely tied to population and industrial centers.     

基于支持向量机的湿法脱硫塔污染治理优化与能效评价

环境污染排放治理与系统综合能耗之间的协同优化与评价是解决我国环境与能源不堪重负的理论前提。针对燃煤电厂脱硫系统协同优化与评价的关键问题,基于湿法脱硫控制系统在线运行数据的支持向量机(SVM)智能深度自学习,构建了脱硫系统实时在线污染排放指标和系统综合能耗指标的协同预测模型,明晰了关键调控参数-污染排放治理-系统综合能耗之间的协同耦合规律,据此提出了工业级锅炉脱硫塔的污染排放治理与系统综合能耗的创新协同评估方法。结果表明：出口二氧化硫排放浓度和系统综合能耗指标与氧含量呈负关联协同耦合关系,与浆液密度呈先减后增的协同耦合关系,而污染排放治理与系统综合能耗指标呈负关联协同耦合关系;提高氧含量并将浆液密度控制在约1 250 kg·m⁻³,可使系统污染排放治理与综合能耗指标均处于最优状态,协同优化可使系统综合能耗指标最大降幅达8.3%。示范工程验证表明：脱硫系统污染排放与综合能耗指标的协同预测模型精准可靠,其最大误差小于10%。综合上述结果,基于支持向量机的回归方法可应用于工业级湿法脱硫锅炉的污染排放治理与能效评价,对实际脱硫工程的优化运行具有指导意义。     

Estimating historical anthropogenic global sulfur emission patterns for the period 1850–1990

It is important to establish a reliable regional emission inventory of sulfur as a function of time when assessing the possible effects of global change and acid rain. This study developed a database of annual estimates of national sulfur emissions from 1850 to 1990. A common methodology was applied across all years and countries allowing for global totals to be produced by adding estimates from all countries. The consistent approach facilitates the modification of the database and the observation of changes at national, regional, or global levels. The emission estimates were based on net production (i.e., production plus imports minus exports), sulfur content, and sulfur retention for each country's production activities. Because the emission estimates were based on the above considerations, our database offers an opportunity to independently compare our results with those estimates based on individual country estimates. Fine temporal resolution clearly shows emission changes associated with specific historical events (e.g., wars, depressions, etc.) on a regional, national, or global basis. The spatial pattern of emissions shows that the US, the USSR, and China were the main sulfur emitters (i.e., approximately 50% of the total) in the world in 1990. The USSR and the US appear to have stabilized their sulfur emissions over the past 20 yr, and the recent increases in global sulfur emissions are linked to the rapid increases in emissions from China. Sulfur emissions have been reduced in some cases by switching from high- to low-sulfur coals. Flue gas desulfurization (FGD) has apparently made important contributions to emission reductions in only a few countries, such as Germany.     

Measuring environmental efficiency and technology inequality of China’s power sector: methodological comparisons among data envelopment analysis,free disposable hull,and super free disposable hull models

Environmental Science and Pollution Research - China’s power sector has received great research attention because of its large energy consumption and CO2 emissions. This study assesses the...     

Speciation and origin of particulate copper in runoff water from a Mediterranean vineyard catchment

Fungicide treatments have led to large copper contents of the topsoils of most vineyards. This paper examines the contamination of surface waters by copper in a Mediterranean wine-growing catchment. Its aims were to characterise the forms of copper associated with suspended matter during a heavy autumn storm event and to identify which soils contribute the most to the copper exports. A mixing model involving three reservoirs, corresponding to three soil-landscape units (plateau, terraces and footslope-depression system) and two tracers (reducible iron content and dolomite/calcite ratio) was used to estimate the contribution of each reservoir to erosion during a storm flow. The average copper concentration of the suspended matter was 245 mg kg(-1), of which 1% was exchangeable, 4% acid-soluble, 10% oxidizable, 23% reducible and 63% residual. The soils of the plateau of the catchment (chromic luvisols and haplic calcisols-FAO soil classification) were the source of 42% of copper exports but represented only 27% of the total catchment area.     

International trade in meat: the tip of the pork chop

This paper provides an original account of global land, water, and nitrogen use in support of industrialized livestock production and trade, with emphasis on two of the fastest-growing sectors, pork and poultry. Our analysis focuses on trade in feed and animal products, using a new model that calculates the amount of "virtual" nitrogen, water, and land used in production but not embedded in the product. We show how key meat-importing countries, such as Japan, benefit from "virtual" trade in land, water, and nitrogen, and how key meat-exporting countries, such as Brazil, provide these resources without accounting for their true environmental cost. Results show that Japan's pig and chicken meat imports embody the virtual equivalent of 50% of Japan's total arable land, and half of Japan's virtual nitrogen total is lost in the US. Trade links with China are responsible for 15% of the virtual nitrogen left behind in Brazil due to feed and meat exports, and 20% of Brazil's area is used to grow soybean exports. The complexity of trade in meat, feed, water, and nitrogen is illustrated by the dual roles of the US and The Netherlands as both importers and exporters of meat. Mitigation of environmental damage from industrialized livestock production and trade depends on a combination of direct-pricing strategies, regulatory approaches, and use of best management practices. Our analysis indicates that increased water- and nitrogen-use efficiency and land conservation resulting from these measures could significantly reduce resource costs.     

A method to estimate the impact of clear-cutting on nutrient concentrations in boreal headwater streams

Large-scale forestry operations, like clear-cutting, may impair surface water quality if not done with environmental considerations in mind. Catchment and country level estimates of nutrient loads from forestry are generally based on specific export values, i.e., changes in annual exports due to the implemented forestry operations expressed in kg ha⁻¹. We introduce here a specific concentration approach as a method to estimate the impact of clear-cutting on nutrient concentrations and export in headwater streams. This new method is potentially a more dynamic and flexible tool to estimate nutrient loads caused by forestry, because variation in annual runoff can be taken into account in load assessments. We combined water quality data from eight boreal headwater catchment pairs located in Finland and Sweden, where the effect of clear-cutting on stream water quality has been studied experimentally. Statistically significant specific concentration values could be produced for total nitrogen, nitrate, ammonium, and phosphate. The significant increases in the concentrations of these nutrients occurred between 2 and 6 years after clear-cutting. Significant specific concentration values could not be produced for total phosphorus and total organic carbon with the whole dataset, although in some single studies significant increases in their concentrations after clear-cutting were observed. The presented method enables taking into account variation in runoff, temporal dynamics of effects, and the proportional size of the treated area in load calculations. The number of existing studies considering large site-specific variation in responses to clear-cutting is small, and therefore further empirical studies are needed to improve predictive capabilities of the specific concentration values.     

废铅蓄电池回收的节能降碳案例分析

为了解我国废铅蓄电池回收过程的节能降碳现状,以典型废铅蓄电池回收工艺为研究对象,分析了废铅蓄电池回收过程的产品综合能耗和碳排放情况。结果表明,案例企业的单位产品综合能耗 (当量能耗) 为98.35 kgce·t⁻¹;天然气消耗是最大的能耗来源;铅膏熔炼工序是废铅蓄电池回收过程中产品综合能耗和碳排放量最大的工序;焦粉作为还原剂进入熔炼工序的排放是最主要的碳排放源。在燃料燃烧、能源作为原材料、净购入电力和热力方面,能耗和碳排放量核算是线性相关的,在上述方面寻求节能措施可使废铅蓄电池回收企业实现同时降碳。此外,碳酸盐引起的过程排放和耗能工质也会影响企业的节能降碳效果,建议在后续的核算指南中进行统一规定。本研究结果可为废铅蓄电池回收过程的节能降碳提供参考。     

Energy consumption and energy-saving potential analysis of pollutant abatement systems in a 1000-MW coal-fired power plant

Pollutant abatement systems are widely applied in the coal-fired power sector, and the energy consumption is considered an important part of the auxiliary power. An energy consumption analysis and assessment model of pollutant abatement systems in a power unit was developed based on the dynamic parameters and technology. The energy consumption of pollutant abatement systems in a 1000-MW coal-fired power unit that meets the ultra-low emission limits and the factors of operating parameters, including unit load and inlet concentration of pollutants, on the operating power were analyzed. The results show that the total power consumption of the pollutant abatement systems accounted for 1.27% of the gross power generation during the monitoring period. The wet flue gas desulfurization (WFGD) system consumed 67% of the rate, whereas the selective catalytic reduction (SCR) and electrostatic precipitator (ESP) systems consumed 8.9% and 24.1%, respectively. The power consumption rate of pollutant abatement systems decreased with the increase of unit load and increased with the increase of the inlet concentration of pollutants. The operation adjustment was also an effective method to increase the energy efficiency. For example, the operation adjustment of slurry circulation pumps could promote the energy-saving operation of the WFGD system.

Implications: The application of pollutant abatement technologies increases the internal energy consumption of the power plant, which will lead to an increase of power generation costs. The real-time energy consumption of the different pollutant abatement systems in a typical power unit is analyzed based on the dynamic operating data. Further, the influence of different operating parameters on the operating power of the system and the possible energy-saving potential are analyzed.     

Mitigation of CO2 Emissions from the EU-15 Building Stock. Beyond the EU Directive on the Energy Performance of Buildings (9 pp)

-

Goal Scope and Background. The European Directive on Energy Performance of Buildings which came into force 16 December 2002 will be implemented in the legislation of Member States by 4 January 2006. In addition to the aim of improving the overall energy efficiency of new buildings, large existing buildings will become a target for improvement, as soon as they undergo significant renovation. The building sector is responsible for about 40% of Europe's total end energy consumption and hence this Directive is an important step for the European Union in order that it should reach the level of saving required by the Kyoto Agreement. In this the EU is committed to reduce CO2 emissions relative to the base year of 1990 by 8 per cent, by 2010. But what will be the impact of the new Directive, how large could be the impacts of extending the obligation for energy efficiency retrofitting towards smaller buildings? Can improvement of the insulation offset or reduce the growing energy consumption from the increasing installation of cooling installations? EURIMA, the European Insulation Manufacturers Association and EuroACE, the European Alliance of Companies for Energy Efficiency in Buildings, asked Ecofys to address these questions.

Methods

The effect of the EPB Directive on the emissions associated with the heating energy consumption of the total EU 15 building stock has been examined in a model calculation, using the Built Environment Analysis Model (BEAM), which was developed by Ecofys to investigate energy saving measures in the building stock. The great complexity of the EU-15 building stock had to be simplified by examining five standard buildings with eight insulation standards, which are assigned to building age and renovation status. Furthermore, three climatic regions (cold, moderate, warm) were distinguished for the calculation of the heating energy demand. This gave a basic 210 building types for which the heating energy demand and CO2 emissions from heating were calculated according to the principles of the European Norm EN 832.

Results and Discussion

The model calculations demonstrates that the main contributor to the total heating related CO2 emissions of 725 Mt/a from the EU building stock in 2002 is the residential sector (77%) while the remaining 23% originates from non-residential buildings. In the residential sector, single-family houses represent the largest group responsible for 60% of the total CO2 emissions equivalent to 435 Mt/a.

-

- The technical potential: If all retrofit measures in the scope of the Directive were realised immediately for the complete residential and non-residential building stock the overall CO2 emission savings would add up to 82 Mt/a. An additional saving potential compared to the Directive of 69 Mt/a would be created if the scope of the Directive was extended to cover retrofit measures in multi-family dwellings (200-1000m2) and non-residential buildings smaller than 1000m2 used floor space. In addition including the large group of single-family dwellings would lead to a potential for additional CO2 emission reductions compared to the Directive of 316 Mt/a.

-

- Temporal mobilization of the potential: Calculations based on the building stock as it develops over time with average retrofit rates demonstrated that regulations introduced following the EPB Directive result in a CO2 emissions decrease of 34 Mt/a by the year 2010 compared to the business as usual scenario. Extending the scope of the EPB Directive to all residential buildings (including single and multi-family dwellings), the CO2 emission savings potential over the 'business as usual' scenario could be doubled to 69 Mt/a in the year 2010. This creates an additional saving potential compared to the Directive of 36 Mt/a.

-

- Cooling demand: The analysis demonstrated that in warm climatic zones the cooling demand can be reduced drastically by a combination of lowering the internal heat loads and by improved insulation. With the reduction of the heat loads to a moderate level the cooling demand, e.g. of a terraced house located in Madrid, can be reduced by an additional 85% if the insulation level is improved appropriately.

Conclusions

This study demonstrates that the European Directive on Energy Performance of Buildings will have a significant impact on the CO2 emissions of the European building stock. The main saving potential lies in insulation of the existing building stock. Beyond this, CO2 emissions could, however, be greatly reduced if the scope of the Directive were to be extended to include retrofit of smaller buildings.

Recommendation and Perspective

The reductions should be seen in relation to the remaining gap of 190 Mt CO2 eq. per annum between the current emission levels of EU-15 and the target under the Kyoto-Protocol for the year 2010. The energy and industrial sector will probably contribute only a fraction of this reduction via the newly established EU emissions trading scheme and connected projects under the flexible mechanism. In addition, the traffic sector is likely to continue its growth path leading to a widening of the gap. Thus, there is likely to be considerable pressure on the EU building sector to contribute to the EU climate targets beyond what will be achieved by means of the current EPB Directive. Legislators on the EU and national level are therefore advised to take accelerated actions to tap the very significant emission reduction potentials available in the EU building stock.     

Endosulfan in China 1—gridded usage inventories

Background, aim, and scope  Endosulfan, an organochlorine pesticide (OCP), is genotoxic in mammalian cells and generally considered to be toxic and classified by the World Health Organization and the US Environmental Protection Agency as priority pollutants and a nominator for inclusion in a future iteration of the persistent organic pollutants treaty. Endosulfan is a currently used pesticide and still being used worldwide. The general trend of total global endosulfan use has increased continuously since the first year when this pesticide was applied. It is critical to create national endosulfan usage/emission inventories for China to carry out source–receptor relation analysis, risk assessment, and other research related to endosulfan in this country. Chinese inventories have been published for some OCPs, such as technical HCH and lindane, DDT, and chlordane; for endosulfan, however, there has not been any usage inventory available on any scales (national or provincial), although endosulfan has been widely used since 1994 in this country. This is the first part of the work. The goal of this paper is to quantify the historical production and usage of endosulfan in China and to compile gridded historical usage inventories of endosulfan for this country. Based on these usage inventories, emission and residue inventories will be created, which is the goal of the second part of the work. Materials and methods  Due to the lack of national production and usage information of endosulfan in China, a method to estimate the use of endosulfan was developed. First, information of crops on which endosulfan is applied and average endosulfan use and annual application frequencies of endosulfan on these crops were collected. Secondly, usage of endosulfan on each crop was estimated using the national cropland area for each province from Chinese government reports. Finally, with the help of GIS (geographic information system), the usage data of this insecticide was allocated to a grid system, with a 1/4° longitude by 1/6° latitude resolution, with a size for each grid cell of approximately 25 km by 25 km. Results and discussion  The use of endosulfan in agriculture in China started on cotton in 1994, and on wheat, tea, tobacco, apples, and other fruits in 1998. Endosulfan usage on cotton, wheat, tea, tobacco, and apples in China has been estimated to be approximately 25,700 t between 1994 and 2004. The province with the highest usage of endosulfan is Henan Province, with a total usage reaching 4,000 t, followed by the uses in Xinjiang Autonomous Region (3,200 t), Shandong Province (3,000 t), Hebei Province (2,100 t), and Anhui Province (1,900 t). Gridded usage inventories of endosulfan at a 1/4° longitude by 1/6° latitude resolution have been created, which indicate that the intensive endosulfan use was in the south of Hebei Province, west of Shandong Province, east of Henan Province, north of Anhui Province, east of Jiangsu Province, and some areas in Yunnan Province and Xinjiang Autonomous Region. General agreement has been found between the usage data from our estimation and the small amount of usage data published in China. Conclusions  This is the first national gridded endosulfan usage inventory produced for China. The annual applications of endosulfan from 1994 to 2004 in China were estimated based on the total areas of major crops, on which endosulfan was applied, and spatial distribution of the application was generated at provincial and prefecture levels. With the help of GIS, endosulfan usage based on prefecture was transferred to a 1/4° longitude by 1/6° latitude gridding system. The satisfaction of the inventories was supported by the consistence between the estimation of the annual usage and the reported annual production of endosulfan. Recommendations and perspectives  This gridded endosulfan usage inventory created in this study will be improved upon availability of new information of endosulfan. The usage inventories can be used to create gridded emission and residue inventories for this insecticide. It is believed that this work will pave the way for further endosulfan studies in China and beyond.