Application of polyaniline-based adsorbents for dye removal from water and wastewater—a review

Environmental Science and Pollution Research - Several industries release varying concentration of dye-laden effluent with substantial negative consequences for any receiving environmental...     

Application of ozone for the removal of bisphenol A from water and wastewater – A review

The extensive use of Bisphenol A (BPA) in the plastics industry has led to increasing reports of its presence in the aquatic environment, with concentrations of ng L^?1 to μg L^?1. Various advanced oxidation processes, including ozonation, have been shown to effectively degrade BPA. This paper reviews the current advancements in using ozone to remove BPA from water and wastewater.Most of the published work on the oxidation of BPA by ozone has focused on the efficiency of BPA removal in terms of the disappearance of BPA, and the effect of various operational parameters such as ozone feed rate, contact time and pH; some information is available on the estrogenic activity of the treated water. Due to increasing operational reliability and cost effectiveness, there is great potential for industrial scale application of ozone for the treatment of BPA. However, there is a significant lack of information on the formation of oxidation by-products and their toxicities, particularly in more complex matrices such as wastewater, and further investigation is needed for a better understanding of the environmental fate of BPA.     

Does area deprivation modify the association between exposure to a nitrate and low-dose atrazine metabolite mixture in drinking water and small for gestational age? A historic cohort study

Birth weight may be influenced by environmental and socio-economic factors that could interact. The main objective of our research was to investigate whether area deprivation may modify the association between drinking water exposure to a mixture of atrazine metabolites and nitrates during the second trimester of pregnancy and prevalence of small for gestational age (SGA) neonates. We conducted a historic cohort study in Deux-Sèvres, France between 2005 and 2010, using birth records, population census and regularly performed drinking water withdrawals at community water systems. Exposure to an atrazine metabolite/nitrate mixture in drinking water was divided into six classes according to the presence or absence of atrazine metabolites and to the terciles of nitrate concentrations in each trimester of pregnancy. We used a logistic regression to model the association between SGA and mixture exposure at the second trimester while taking into account the area deprivation measured by the Townsend index as an effect modifier and controlling for the usual confounders. We included 10,784 woman–neonate couples. The risk of SGA when exposed to second tercile of nitrate without atrazine metabolites was significantly greater in women living in less deprived areas (OR?=?2.99; 95 % CI (1.14, 7.89)), whereas it was not significant in moderately and more deprived areas. One of the arguments used to explain this result is the presence of competing risk factors in poorer districts.     

A high-resolution historical sediment record of nutrients,trace elements and organochlorines (DDT and PCB) deposition in a drinking water reservoir (Lake Brêt,Switzerland) points at local and regional pollutant sources

The ¹³⁷Cs and ²¹⁰Pb dating of a 61-cm long sediment core retrieved from a drinking water reservoir (Lake Brêt) located in Switzerland revealed a linear and relatively high sedimentation rate (～1 cm year^?1) over the last decades. The continuous centimeter scale measurement of physical (porewater and granulometry), organic (C_org, P, N, HI and OI indexes) and mineral (C_min and lithogenic trace elements) parameters therefore enables reconstructing the environmental history of the lake and anthropogenic pollutant input (trace metals, DDT and PCBs) at high resolution. A major change in the physical properties of the lowermost sediments occurred following the artificial rise of the dam in 1922. After ca. 1940, there was a long-term up-core increase in organic matter deposition attributed to enhance primary production and anoxic bottom water conditions due to excessive nutrient input from a watershed predominantly used for agriculture that also received domestic effluents of two wastewater-treatment plants. This pattern contrasts with the terrigenous element input (Eu, Sc, Mg, Ti, Al, and Fe) which doubled after the rising of the dam but continuously decreased during the last 60 years. By comparison, the trace metals (Cu, Pb and Hg) presented a slight enrichment factor (EF) only during the second part of the 20th century. Although maximum EF Pb (>2) occurred synchronously with the use of leaded gasoline in Switzerland (between ca. 1947 and 1985) the Hg and Cu profiles exhibited a relatively similar trend than Pb during the 20th century, therefore excluding the alkyl-lead added to petrol as the dominant (atmospheric) source of lead input to Lake Brêt. Conversely, the Cu profile that did not follow the decrease registered in Pb and Hg during the last 10 years, suggests an additional source of Cu probably linked to the impact of agricultural activities in the area. In absence of heavy industries in the catchment, the atmospheric deposition of DDT and PCBs via surface runoff followed the historical emissions of POPs in Switzerland. Such result highlights the regional contamination of freshwater resources by the large-scale emission of toxic industrial chemicals in the 1960s and 1970s as well as the efficiency of the regulatory measures subsequently taken.     

Synthesis and optimization of spherical nZVI (20–60 nm) immobilized in bio-apatite-based material for efficient removal of phosphate: Box-Behnken design in a fixed-bed column

In the present study, bio-apatite/nZVI composite was synthesized through Fe(III) reduction with sodium borohydride and was fully characterized by FTIR, XRD, SEM–EDX, TEM, BET, BJH, and pH_PZC. Column experiments were carried out for the removal of phosphate as a function of four operational parameters including initial phosphate concentration (100–200 mg L^?1), initial solution pH (2–9), bed height (2–6 cm), and influent flow rate (2.5–7.5 mL min^?1) using a response surface methodology (RSM) coupled with Box-Behnken design (BBD). 2D contour and 3D surface plots were employed to analyze the interactive effects of the four operating parameters on the column performance (e.g., uptake capacity and saturation time). According to ANOVA analysis, the influent flow rate and bed height are the most important factor on phosphate uptake capacity and saturation time, respectively. A quadratic polynomial model was excellently fitted to experimental data with a high coefficient of determination (>?0.96). The RSM-BBD model predicted maximum phosphate adsorption capacity of 85.71 mg g^?1 with the desirability of 0.995 under the optimal conditions of 135.35 mg L^?1, 2, 2 cm, and 7.5 mL min^?1 for initial phosphate concentration, initial solution pH, bed height, and influent flow rate, respectively. The XRD analysis demonstrated that the reaction product between bio-apatite/nZVI composite and phosphate anions was Fe₃ (PO₄)₂. 8H₂O (vivianite). The suggested adsorbent can be effectively employed up to five fixed-bed adsorption–desorption cycles and was also implemented to adsorb phosphate from real samples.