Environmental and health risk assessment of Pb,Zn, As and Sb in soccer field soils and sediments from mine tailings: solid speciation and bioaccessibility

Areas polluted by the persistent presence of metal(loid)s induce health problems, especially when recreational activities (on land or water) promote human exposure to the pollutants. This study focuses on one of the most encountered worldwide mining waste, i.e. those from the extraction of Pb–Zn–Ag. The representative Pb–Zn-rich tailing (about 64,100 m³) sampled is located near a soccer field and a famous river for fishing. The scientific interests is relative to: (1) mobility and bioaccessibility of metal(oid)s, (2) human risk assessments and (3) relationship between human risks and solid-bearing phases in the environment. Soccer field soils, tailings and sediments from the nearby river were sampled; moreover, metal(loid) speciation (from BCR experiments) and bioaccessibility were measured and solid speciation performed by X-ray diffraction and electron microscopy in order to highlight metal(loid) dispersion and impact. Results demonstrate that the soccer field is highly contaminated by Pb, Zn, As and Sb due primarily to waste runoff. In terms of risk assessment, Pb and As human bioaccessibility highlights the major health risk (48 and 22.5 % of human bioaccessibility, respectively). Since local populations are regularly in close contact with metal(loid)s, the health risk due to pollutant exposure needs to be reduced through sustainable waste disposal and the rehabilitation of polluted sites.     

Relationship between e-waste recycling and human health risk in India: a critical review

Informal recycling of waste (including e-waste) is an emerging source of environmental pollution in India. Polychlorinated biphenyls (PCBs), polychlorinated diphenyl ethers (PBDEs), and heavy metals, among other substances, are a major health concern for workers engaged in waste disposal and processing, and for residents living near these facilities, and are also a detriment to the natural environment. The main objective of this review article was to evaluate the status of these impacts. The review found that, huge quantity of e-waste/waste generated, only a small amount is treated formally; the remainder is processed through the informal sector. We also evaluated the exposure pathways, both direct and indirect, and the human body load markers (e.g., serum, blood, breast milk, urine, and hair), and assessed the evidence for the association between these markers and e-waste exposure. Our results indicated that the open dumping and informal e-waste recycling systems should be replaced by the best available technology and environmental practices, with proper monitoring and regular awareness programs for workers and residents. Further and more detailed investigation in this area is also recommended.     

From bioavailability to risk assessment of polluted soil using snails: link between excess transfer and inhibition of sexual maturation

Environmental Science and Pollution Research - An accurate assessment of the environmental risk of soils contaminated by metal(loid)s (MEs) requires quantifying exposure and knowing the toxicity of...     

A novel dismantling process of waste printed circuit boards using water-soluble ionic liquid

Recycling processes for waste printed circuit boards (WPCBs) have been well established in terms of scientific research and field pilots. However, current dismantling procedures for WPCBs have restricted the recycling process, due to their low efficiency and negative impacts on environmental and human health. This work aimed to seek an environmental-friendly dismantling process through heating with water-soluble ionic liquid to separate electronic components and tin solder from two main types of WPCBs—cathode ray tubes and computer mainframes. The work systematically investigates the influence factors, heating mechanism, and optimal parameters for opening solder connections on WPCBs during the dismantling process, and addresses its environmental performance and economic assessment. The results obtained demonstrate that the optimal temperature, retention time, and turbulence resulting from impeller rotation during the dismantling process, were 250 °C, 12 min, and 45 rpm, respectively. Nearly 90% of the electronic components were separated from the WPCBs under the optimal experimental conditions. This novel process offers the possibility of large industrial-scale operations for separating electronic components and recovering tin solder, and for a more efficient and environmentally sound process for WPCBs recycling.     

Impact of the earthworm Lumbricus terrestris (L.) on As, Cu, Pb and Zn mobility and speciation in contaminated soils

To assess the risks that contaminated soils pose to the environment properly a greater understanding of how soil biota influence the mobility of metal(loid)s in soils is required. Lumbricus terrestris L. were incubated in three soils contaminated with As, Cu, Pb and Zn. The concentration and speciation of metal(loid)s in pore waters and the mobility and partitioning in casts were compared with earthworm-free soil. Generally the concentrations of water extractable metal(loid)s in earthworm casts were greater than in earthworm-free soil. The impact of the earthworms on concentration and speciation in pore waters was soil and metal specific and could be explained either by earthworm induced changes in soil pH or soluble organic carbon. The mobilisation of metal(loid)s in the environment by earthworm activity may allow for leaching or uptake into biota.     

Transport and attenuation of metal(loid)s in mine tailings amended with organic carbon: Column experiments

A laboratory-scale column experiment was conducted to evaluate the effect of organic carbon amendments on the mobility of As, Cu, Fe, Mn, Mo, Ni, Pb, Sb, Tl and Zn in mine tailings. Three columns were packed with sulfide- and carbonate-rich tailings, which were amended with a 1:1 (vol.) mixture of peat and spent brewing grain at proportions of 0, 2 and 5vol.%. A simulated input solution characterized by circumneutral pH and elevated concentrations of SO(4) and S(2)O(3) was passed through the columns for 540 days. The input solution contained low concentrations of metal(loid)s during the initial 300 days and elevated concentrations thereafter. Decreases in mass transport of S(2)O(3) were observed in all columns; with increased attenuation observed at 5 vol. % organic carbon content. Removal of Mn, Ni, Cu, Sb and Mo was observed in all columns during the initial 300 days. However, during this time, mobilization of Fe, As, Zn and Pb was observed, with the greatest increases in concentration observed at the higher organic carbon content. During the final 240 days, S(2)O(3) removal was enhanced in columns containing organic carbon, and Fe, Mn, Ni, Tl, As and Sb removal also was observed. This study demonstrates the influence of organic carbon amendments on metal(loid) mobility in mine tailings. Decreases in mass discharge of metal(loid)s may be achieved using this technique; however, site-specific geochemical conditions must be considered before field-scale implementation.     

Application of different single extraction procedures for assessing the bioavailability of heavy metal(loid)s in soils from overlapped areas of farmland and coal resources

Heavy metal(loid) extraction from soils in overlapped areas of farmland and coal resources (OAFCR) is crucial in understanding heavy metal bioavailability in soil and the subsequent risks to crops and consumers. However, limited attention has been paid to the extraction procedure of heavy metal(loid)s in OAFCR soils in the research. This study therefore explored different single and mixed extraction procedures, such as acetic acid (HOAc), citric acid, ammonium bicarbonate-diethylenetriaminepentaacetic acid (AB-DTPA), ethylene diamine tetraacetic acid + ammonium acetate (EDTA+NH₄OAc), and total digestion (HNO₃-HClO₄-HF) to determine the bioavailability of As, Cd, Cr, Cu, Pb, and Zn in OAFCR soil in Xuzhou, China. The results showed the metal(loid) extraction capacity from soil of the different procedures could be ranked as AB-DTPA > EDTA+NH₄OAc > HOA_C > citric acid. The transfer ability of heavy metal(loid)s from soil to wheat tissues and from wheat roots to aerial parts was analyzed by calculating the bioconcentration factor and transfer factor, respectively. Transfer factors of all metal(loid)s were < 1 except Cr whose transfer factor from root to shell and straw were > 1. It is suspected that foliar uptake plays a dominant role in Cr uptake. Correlation analysis between the bioavailability of heavy metal(loid)s in soil and uptake in respective wheat tissues was performed to recommend the best extraction procedures for different studies. The results show that AB-DTPA extraction is recommended for Cu uptake to wheat roots, straws, shells and grains, Zn uptake to roots, and Cd uptake to roots and straws.

     

Impact assessment of waste management options in Singapore

This paper describes the application of life cycle assessment for evaluating various waste management options in Singapore, a small-island city state. The impact assessment method by SimaPro is carried out for comparing the potential environmental impacts of waste treatment options including landfilling, incineration, recycling, and composting. The inventory data include gases and leachate from landfills, air emissions and energy recovery from incinerators, energy (and emission) savings from recycling, composting gases, and transport pollution. The impact assessment results for climate change, acidification, and ecotoxicity show that the incineration of materials imposes considerable harm to both human health and the environment, especially for the burning of plastics, paper/cardboard, and ferrous metals. The results also show that, although some amount of energy can be derived from the incineration of wastes, these benefits are outweighed by the air pollution (heavy metals and dioxins/furans) that incinerators produce. For Singapore, landfill gases and leachate generate minimal environmental damage because of the nation's policy to landfill only 10% of the total disposed wastes. Land transportation and separation of waste materials also pose minimal environmental damage. However, sea transportation to the landfill could contribute significantly to acidification because of the emissions of sulfur oxides and nitrogen oxides from barges. The composting of horticultural wastes hardly imposes any environmental damage. Out of all the waste strategies, the recycling of wastes offers the best solution for environmental protection and improved human health for the nation. Significant emission savings can be realized through recycling.     

Distribution of polycyclic aromatic hydrocarbons in soils at Guiyu area of China, affected by recycling of electronic waste using primitive technologies

The concentration, distribution, profile and possible source of polycyclic aromatic hydrocarbons (PAHs) in soil were studied in Guiyu, an electronic waste (E-waste) recycling center, using primitive technologies in Southeast China. Sixteen USEPA priority PAHs were analyzed in 49 soil samples (0-10 cm layer) in terms of individual and total concentrations, together with soil organic matter (SOM) concentrations. The concentrations of a sum of 16 PAHs ranged from 44.8 to 3206 microgkg(-1) (dry weight basis), in the descending order of E-waste open burning sites (2065 microgkg(-1))>areas near burning sites (851microgkg(-1))>rice fields (354 microgkg(-1))>reservoir areas (125microgkg(-1)). The dominant PAHs were naphthalene, phenanthrene and fluoranthene, which were mainly derived from incomplete combustion of E-waste (e.g. wire insulations and PVC materials), and partly from coal combustion and motorcycle exhausts. All individual and total PAH concentrations were significantly correlated with SOM except for naphthalene and acenaphthylene. Principal component analysis was performed, which indicated that PAHs were mainly distributed into three groups in accordance with their ring numbers and biological and anthropogenic source. In conclusion, PAH concentrations in the Guiyu soil were affected by the primitive E-waste recycling activities.     

Trace metal and metalloid levels in surface water of Marcal River before and after the Ajka red mud spill, Hungary

The aim of this study was to compare and assess the dissolved concentrations of trace elements (As, Zn, Hg, Cd, Cr, Ni, Pb and Cu) in surface water of Marcal River before and after the red mud spill that occurred in Ajka, western Hungary, in October 2010. The caustic sludge flooded the surrounding settlements and polluted the nearby Torna Creek, which flows through the Marcal and Raba rivers into the Danube. A total of 92 surface water samples were collected from the Marcal River in the period of 2007–2012 and analysed for dissolved trace metal(loid)s by atomic absorption spectroscopy method. After the spill, the water management authority initially focused on acid dosing of surface waters to lower pH and was effective in lowering both pH and metal(loid) concentrations. Among the dissolved trace metal(loid)s, arsenic and nickel levels were moderately higher in the Marcal River 2 years since the spill compared to that observed in the pre-disaster period. The concentrations of dissolved trace metal(loid)s did not exceed the European water quality standards and the US Environmental Protection Agency aquatic life criteria values (excluding one sample for cadmium).     

Foliar application of lead and arsenic solutions to Spinacia oleracea: biophysiochemical analysis and risk assessment

Environmental Science and Pollution Research - Atmospheric contamination by heavy metal(loid)s is a widespread global issue. Recent studies have shown foliar pathway of heavy metal(loid) uptake by...     

The impact of municipal solid waste management on greenhouse gas emissions in the United States

Technological advancements, environmental regulations, and emphasis on resource conservation and recovery have greatly reduced the environmental impacts of municipal solid waste (MSW) management, including emissions of greenhouse gases (GHGs). This study was conducted using a life-cycle methodology to track changes in GHG emissions during the past 25 years from the management of MSW in the United States. For the baseline year of 1974, MSW management consisted of limited recycling, combustion without energy recovery, and landfilling without gas collection or control. This was compared with data for 1980, 1990, and 1997, accounting for changes in MSW quantity, composition, management practices, and technology. Over time, the United States has moved toward increased recycling, composting, combustion (with energy recovery) and landfilling with gas recovery, control, and utilization. These changes were accounted for with historical data on MSW composition, quantities, management practices, and technological changes. Included in the analysis were the benefits of materials recycling and energy recovery to the extent that these displace virgin raw materials and fossil fuel electricity production, respectively. Carbon sinks associated with MSW management also were addressed. The results indicate that the MSW management actions taken by U.S. communities have significantly reduced potential GHG emissions despite an almost 2-fold increase in waste generation. GHG emissions from MSW management were estimated to be 36 million metric tons carbon equivalents (MMTCE) in 1974 and 8 MMTCE in 1997. If MSW were being managed today as it was in 1974, GHG emissions would be approximately 60 MMTCE.     

Chromosomal aberrations and DNA damage in human populations exposed to the processing of electronics waste

Background, aim, and scope  It has been known that the pollutants of electronic wastes (E-wastes) can lead to severe pollution to the environment. It has been reported that about 50% to 80% of E-wastes from developed countries are exported to Asia and Africa. It has become a major global environmental problem to deal with ‘E-wastes’. E-waste recycling has remained primitive in Jinghai, China. This not only produces enormous environmental pollution but also can bring about toxic or genotoxic effects on the human body, threatening the health of both current residents and future generations living in the local environment. The concentration of lead in the blood of children in the E-waste polluted area in China is higher than that of the control area. But little is known about the cytogenetic effect to human beings caused by the pollution of E-wastes. In the present study, experiments have been performed to investigate the genetics of permanent residents of three villages with numerous E-waste disposal sites and to analyze the harmful effects of exposure to E-wastes. Materials and methods  In total, 171 villagers (exposed group) were randomly selected from permanent residents of three villages located in Jinghai County of Tianjin, China, where there has been massive disposal of E-wastes. Thirty villagers were selected from the neighboring towns without E-waste disposal sites to serve as controls. Chromosomal aberrations and cytokinesis blocking micronucleus were performed to detect the cytogenetic effect, dic + r (dicentric and ring chromosome), monomer, fragments (acentric fragments, minute chromosomes, and acentric rings), translocation, satellite, quadriradial, total aberrations, and micronuclear rate were scored for each subject. DNA damage was detected using comet assay; the DNA percentage in the comet tail (TDNA%), tail moment (TM), and Olive tail moment (OTM) were recorded to describe DNA damage to lymphocytes. Results  The total chromosome aberration rates (5.50%) and micronuclear rates (16.99%) of the exposure group were significantly higher than in the control group (P = 0.000). The percentage of DNA in the comet tail, tail moment, and Olive tail moment detected by comet assay showed that there was a significant difference in DNA damage in the exposure group (P = 0.000). The chromosome aberration, micronucleus rate, and DNA damage observed in women were significantly higher than those in men. Chromosome aberration and micronuclear rates of both smokers and non-smokers in the exposure group are obviously higher than that in the control group (P = 0.000). Discussion  The use of outdated (and unsafe) ways to deal with E-wastes can lead to exposure to a variety of substances harmful to human health. The components of pollution may enter the human body through the air, drinking water, and food chain to damage human genetic material, resulting in genomic instability. The rates of chromosomal aberration, micronucleus formation, and the degree of DNA damage in women in the group exposed to electronic waste were significantly higher than in men. The reason for this may be concerned with the traditional lifestyle of the local residents or the difference of sensitivity to the exposure to E-wastes or any others. Further investigations are needed to provide evidence to demonstrate this. Conclusions  Here, we report the obviously cytogenetic toxicity to the exposure population by the E-waste pollution for the first time. E-waste pollution may be a potential agent of genetic mutation, and may induce cytogenetic damage within the general population exposed to the pollution. These findings need to be considered, and steps should be taken to protect the current population and future generations from the effects of pollution with E-wastes. Recommendations and perspectives  The above results remind us that the impact of E-waste recycling on environmental quality of Jinghai should be evaluated soon. Moreover, it is urgent for the government to prohibit E-waste import and its processing by outdated ways. The future studies such as pollutant details of drinking water, air, and soil in the area as well as epidemiological investigations on the harmful effect to children must be performed eagerly. All the data available do provide a compelling case for immediate action in both countries to address workplace health and safety and waste management. Qiang Liu and Jia Cao contributed equally to this study and share the first authorship.     

Green manure plants for remediation of soils polluted by metals and metalloids: Ecotoxicity and human bioavailability assessment

Borage, white mustard and phacelia, green manure plants currently used in agriculture to improve soil properties were cultivated for 10 wk on various polluted soils with metal(loid) concentrations representative of urban brownfields or polluted kitchen gardens. Metal(loid) bioavailability and ecotoxicity were measured in relation to soil characteristics before and after treatment. All the plants efficiently grow on the various polluted soils. But borage and mustard only are able to modify the soil characteristics and metal(loid) impact: soil respiration increased while ecotoxicity, bioaccessible lead and total metal(loid) quantities in soils can be decreased respectively by phytostabilization and phytoextraction mechanisms. These two plants could therefore be used for urban polluted soil refunctionalization. However, plant efficiency to improve soil quality strongly depends on soil characteristics.     

Avoiding Land Disposal of Hazardous Waste

In response to a growing societal mandate, land disposal of hazardous wastes is gradually being replaced by treatment technologies. This shift to "alternative technologies" is the result of the impacts of past land disposal practices on other environmental media (groundwater, surface water, and air). A prime motivation for adopting alternatives to land disposal is to eliminate these cross-media impacts. Alternative technologies, however, can themselves have cross-media environmental impacts which must be recognized and addressed before such technologies are extensively applied. This paper discusses hazardous waste constituents, common disposal practices, alternative technologies currently being applied, possible cross-media environmental impacts of the alternative technologies, and proposed methods of mitigating these environmental impacts. Case studies from uncontrolled hazardous waste sites and industrial operations are used to illustrate the application of alternative technologies. Case studies include the application of waste treatment technologies as well as the adoption of waste minimization techniques.     

Revisiting e-waste management practices in selected African countries

ABSTRACT

African countries are among the prime destinations of electronic waste (e-waste) also called Waste of Electrical and Electronic Equipment (WEEE), and have been challenged with the management of its environmental and health impacts. This paper was carried out to understand the e-waste sector and policy responses in selected African countries. Data for the study were generated from sources; such as policy documents, legislations and literature. Findings show that the import of WEEE is on rising in Africa while landfill and incineration continued to be widely used handling approaches. Countries studied lack WEEE specific national policies and stringent policy instruments to enforce proper collection and recycling systems. Despite the start-ups in emerging recycling operations, a major gap is that informal e-waste actors dominate the e-waste chain from collection to material extraction and refurbish activities through rudimentary tools that cannot detect toxic elements. Tackling the problem demands integrated multi-actor interventions with multiple stakeholders to reduce WEEE inflow on one hand, and ramping up safe recycling capacity on the other hand.     

Trends in primary particulate matter emissions from Canadian agriculture

Particulate matter (PM) has long been recognized as an air pollutant due to its adverse health and environmental impacts. As emission of PM from agricultural operations is an emerging air quality issue, the Agricultural Particulate Matter Emissions Indicator (APMEI) has been developed to estimate the primary PM contribution to the atmosphere from agricultural operations on Census years and to assess the impact of practices adopted to mitigate these emissions at the soil landscape polygon scale as part of the agri-environmental indicator report series produced by Agriculture and Agri-Food Canada. In the APMEI, PM emissions from animal feeding operations, wind erosion, land preparation, crop harvest, fertilizer and chemical application, grain handling, and pollen were calculated and compared for the Census years of 1981-2006. In this study, we present the results for PM10 and PM2.5, which exclude chemical application and pollen sources as they only contribute to total suspended particles. In 2006, PM emissions from agricultural operations were estimated to be 652.6 kt for PM10 and 158.1 kt for PM2.5. PM emissions from wind erosion and land preparation account for most of PM emissions from agricultural operations in Canada, contributing 82% of PM10 and 76% of PM2.5 in 2006. Results from the APMEI show a strong reduction in PM emissions from agricultural operations between 1981 and 2006, with a decrease of 40% (442.8 kt) for PM10 and 47% (137.7 kt) for PM2.5. This emission reduction is mainly attributed to the adoption of conservation tillage and no-till practices and the reduction in the area of summer fallow land.     

Transport impacts on atmosphere and climate: Land transport

Emissions from land transport, and from road transport in particular, have significant impacts on the atmosphere and on climate change. This assessment gives an overview of past, present and future emissions from land transport, of their impacts on the atmospheric composition and air quality, on human health and climate change and on options for mitigation.In the past vehicle exhaust emission control has successfully reduced emissions of nitrogen oxides, carbon monoxide, volatile organic compounds and particulate matter. This contributed to improved air quality and reduced health impacts in industrialised countries. In developing countries however, pollutant emissions have been growing strongly, adversely affecting many populations. In addition, ozone and particulate matter change the radiative balance and hence contribute to global warming on shorter time scales. Latest knowledge on the magnitude of land transport's impact on global warming is reviewed here.In the future, road transport's emissions of these pollutants are expected to stagnate and then decrease globally. This will then help to improve the air quality notably in developing countries. On the contrary, emissions of carbon dioxide and of halocarbons from mobile air conditioners have been globally increasing and are further expected to grow. Consequently, road transport's impact on climate is gaining in importance. The expected efficiency improvements of vehicles and the introduction of biofuels will not be sufficient to offset the expected strong growth in both, passenger and freight transportation. Technical measures could offer a significant reduction potential, but strong interventions would be needed as markets do not initiate the necessary changes. Further reductions would need a resolute expansion of low-carbon fuels, a tripling of vehicle fuel efficiency and a stagnation in absolute transport volumes. Land transport will remain a key sector in climate change mitigation during the next decades.     

Initiatives to reduce lead from electronic devices: evidence of success from the toxicity characteristic leaching procedure

Discarded electronic devices (E-waste) have historically been found to exceed US Toxicity Characteristic hazardous waste thresholds for lead. Research was conducted to assess whether global and national lead reduction initiatives in the past decade translate to reduced toxicity characteristic leaching procedure (TCLP) lead leaching from E-waste. Nine categories of devices were subjected to TCLP and in all devices except one (smoke detectors), mean TCLP lead concentration results decreased by an order of magnitude or more (to levels below regulation thresholds). Mean TCLP lead concentrations decreased from 29.1 mg/L (2000–2005) to 0.224 mg/L (2008+) for cell phones and 1.26 mg/L (2000–2005) to 0.060 mg/L (2008+) for PCs. Most recently manufactured electronic devices (of those types tested here) comply with the definition of non-hazardous waste under US regulations.

Implications: Discarded electronic devices (E-waste) have often been tested as hazardous waste in the US because of lead leaching. Toxicity characteristic leaching procedure (TCLP) testing on more recently manufactured devices reveals that global lead reduction efforts have resulted in newer devices complying with US non-hazardous waste definitions. While these results highlight the success of lead reduction efforts, they raise policy questions regarding how best to incentivize E-waste recycling going forward.     

北京和上海典型复合包装废物处置环境影响比较

采用生命周期评价法研究比较了北京和上海两地纸塑铝复合包装处置阶段的环境影响。通过现场和资料调研的方式获得此阶段的能量物质的输入输出和环境外排数据。结果表明:北京和上海两地纸塑铝复合包装处置阶段的环境影响潜值分别为-0.428 Pt和9.776 Pt,其主要集中在气候变化、土地占用和无机物对健康的损害三方面;每提高10%的回收率,其环境影响潜值北京和上海可分别降低5.446 Pt和5.799 Pt;上海地区纸塑铝复合包装处置阶段对环境的影响在任何同回收率的情况都要高于北京地区,其主要原因是上海地区填埋产生的温室气体释放量过大和再生企业距离打包点较远。