Concentrations of polychlorinated dibenzo-p-dioxins in processed ball clay from the United States

Processed ball clays commonly used by the ceramic art industry in the United States were collected from retail suppliers and analyzed for the presence and concentration of the 2,3,7,8-Cl substituted polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs). The average PCDD toxic equivalent (TEQ) concentrations of these processed ball clays was approximately 800 pg/g (TEQ-WHO) with characteristic congener profiles and isomer distributions similar to patterns of previously analyzed raw and processed ball clays. The PCDF concentrations were below the average limit of detection (LOD) of 0.5 pg/g. Correlation analyses reveal no significant relationship between total organic carbon (TOC) and either individual, homologues, and total tetra-through octa-chlorinated PCDD congeners, or TEQ concentrations of the processed ball clays. The results are consistent with earlier studies on levels of PCDDs in ball clays. Data from earlier studies indicated that dioxins may be released to the environment during the processing of raw clay or the firing process used in commercial ceramic facilities. The presence of dioxin in the clays also raises concerns about potential occupational exposure for individuals involved in the mining/processing of ball clay, ceramics manufacturing and ceramic artwork.     

In situ sensing of subsurface contamination—part I: near-infrared spectral characterization of alkanes,aromatics, and chlorinated hydrocarbons

There is an imperative need for a chemical sensor capable of remote, in situ, long-term monitoring of chemical species at sites containing toxic chemical spills, specifically at chemical waste dumps, landfills, and locations with underground storage tanks. In the current research, a series of experiments were conducted measuring the near-infrared optical absorption of alkanes, aromatics, and chlorinated hydrocarbons. A spectral library was then developed to characterize the optical spectra of liquid hydrocarbons. Near-infrared analysis was chosen due to compatibility with optical fibers. The goal was to differentiate between classes of hydrocarbons and to also discriminate between compounds within a class of similar molecular structures. It was observed that unique absorption spectra can be obtained for each hydrocarbon, and this uniqueness can be used to discriminate between hydrocarbons from different families. Statistical analyses, namely, principal component analysis (PCA) and correlation coefficient (Spearman and Pearson methods), were attempted to match absorption spectra from an unknown hydrocarbon with the database with limited success. An algorithm was subsequently written to identify the characteristic peaks of each hydrocarbon that could be used to match data from an unknown chemical species with the database.     

Characterization of the Khamaseen (spring) dust in Jordan

During the spring each year, the Eastern Mediterranean is affected by Khamaseen dust cyclones sourced from the North African Sahara. In order to characterize Khamaseen dust in Jordan, we collected dust from ten localities during the spring of 2006. The collected dust was analyzed for grain size, mineralogy, and chemical composition. The dust is predominantly aluminosilicates (clay minerals and feldspars), quartz and carbonates with minor amounts of phosphate. The particles are mostly subrounded to subangular and generally between 5 and 20 μm in size. The majority of the elements analyzed have a natural abundance and distribution. However, several elements such as As, Cd, Cr, Cu, Pb, Se and Zn have higher than natural abundances due to anthropogenic enrichment by various enrichment factors. The analyzed dust samples are chemically homogenous, indicating a similar provenance and good mixing by the Khamaseen winds. The rare earth elements patterns are similar to those of the upper continental crust composition and average shale. Total amount of dust deposited on Jordan during the spring of 2006 is around 0.3 million tons.     

Dibenzo-p-dioxins in the environment from ceramics and pottery produced from ball clay mined in the United States

Processed ball clay samples used in the production of ceramics and samples of the ceramic products were collected and analyzed for the presence and concentration of the 2,3,7,8-Cl substituted polychlorinated dibenzo-p-dioxins and -furans (PCDDs/PCDFs). The processed ball clay had average PCDD concentrations of 3.2 ng/g toxic equivalents, a congener profile, and isomer distribution consistent with those found previously in raw ball clay. The PCDF concentrations were below the average limit of detection (LOD) of 0.5 pg/g. The final fired ceramic products were found to be free of PCDDs/PCDFs at the LODs. A consideration of the conditions involved in the firing process suggests that the PCDDs, if not destroyed, may be released to the atmosphere and could represent an as yet unidentified source of dioxins to the environment. In addition, the PCDDs in clay dust generated during manufacturing operations may represent a potential occupational exposure.     

Dibenzo-p-dioxins in the environment from ceramics and pottery produced from ball clay mined in the United States

Processed ball clay samples used in the production of ceramics and samples of the ceramic products were collected and analyzed for the presence and concentration of the 2,3,7,8-Cl substituted polychlorinated dibenzo-p-dioxins and -furans (PCDDs/PCDFs). The processed ball clay had average PCDD concentrations of 3.2 ng/g toxic equivalents, a congener profile, and isomer distribution consistent with those found previously in raw ball clay. The PCDF concentrations were below the average limit of detection (LOD) of 0.5 pg/g. The final fired ceramic products were found to be free of PCDDs/PCDFs at the LODs. A consideration of the conditions involved in the firing process suggests that the PCDDs, if not destroyed, may be released to the atmosphere and could represent an as yet unidentified source of dioxins to the environment. In addition, the PCDDs in clay dust generated during manufacturing operations may represent a potential occupational exposure.     

Saharan dust incursion over the Tyrrhenian Sea

The Tyrrhenian Sea aerosol was sampled by both mesh and filter techniques. Geostrophic back trajectories were used to identify potential aerosol catchment regions, and it was shown that the atmosphere over the Tyrrhenian Sea received incursions of Saharan dust during the collection period in the autumn of 1979. Mineralogical and chemical parameters were used to characterize this desert-derived material and it was shown that it exerts an important influence on the composition of the local aerosol. On the basis of the present data, it was concluded that the northward movement of Saharan dust across, the Mediterranean can result in the transport of relatively large amounts of crustal material to the southern European coast and so should be included in estimates of Saharan dust production.     

A cheap protocol for colour measure and for diagnostic in planning a cultural heritage restoration. Case study: main façade of Palazzo Governi (Cagliari,Sardinia, Italy)

Due to the bad state of conservation, “Palazzo Governi”, a seventeenth-century building located in the old town district of “Stampace” in Cagliari (Sardinia, Italy), was subjected to restoration. Thus, according to the Italian Law n. 1089, the main façade colour must be reproduced, and therefore, its identification was required. The available samples looked fairly degraded, in particular as an easy plaster to crumble; so, some other analyses able to identify the degradation cause were performed. Two different approaches were adopted to attain the first goal, the visual colour assessment by a sensory panel (subjective) and the instrumental measurement by colorimetry (objective). Ion chromatography and inductively coupled plasma–optical emission spectroscopy analyses, as well as conductivity and pH measurements, were performed to evaluate the presence of water-soluble salts inside the plaster, as possible cause of degradation; the binder/aggregate ratio was also evaluated. A full mineralogical and petrographic characterisation of the materials constituting the samples, as well as the identification of their stratigraphy and some other morphologic and structural features suitable to highlight eventual forms of degradation, were performed by optical microscopy. Scanning electron microscopy coupled to X-ray microanalysis was been also used in order to confirm and/or to integrate data obtained by optical microscopy. The samples have been compared with two samples coming from two other buildings, also located in Sardinia, that looked in good conservation state. The results evidenced that the causes of degradation come from a high salt (especially sulphate) content and a scarce presence of binder in the plaster that can be imputed to a wrong initial composition and/ or to a leaching by acidic rain.     

Investigation on the effect of sintering temperature on kaolin hollow fibre membrane for dye filtration

Despite its extraordinary price, ceramic membrane can still be able to surpass polymeric membrane in the applications that require high temperature and pressure conditions, as well as harsh chemical environment. In order to alleviate the high cost of ceramic material that still becomes one of the major factors that contributes to the high production cost of ceramic membrane, various attempts have been made to use low cost ceramic materials as alternatives to well-known expensive ceramic materials such as alumina, silica, and zirconia in the fabrication of ceramic membrane. Thus, local Malaysian kaolin has been chosen as the ceramic material in this study for the preparation of kaolin hollow fibre membrane since it is inexpensive and naturally abundant in Malaysia. Due to the fact that the sintering process plays a prominent role in obtaining the desired morphology, properties, and performances of prepared ceramic membrane, the aim of this work was to study the effect of different sintering temperatures applied (ranging from 1200 to 1500 °C) in the preparation of kaolin hollow fibre membrane via dry/wet phase inversion-based spinning technique and sintering process. The morphology and properties of membrane were then characterised by SEM, AFM, FTIR, XRD, and three-point bending test, while the performances of membrane were investigated by conducting water permeation and Reactive Black 5 (RB5) dye rejection tests. From the experimental results obtained, the sintering temperature of 1400 °C could be selected as the optimum sintering temperature in preparing the kaolin hollow fibre membrane with the dense sponge-like structure of separation layer that resulted in the good mechanical strength of 70 MPa with the appreciable water permeation of 75 L/h m² bar and RB5 rejection of 68%.     

PCBs in air, soil and milk in industrialized and urban areas of KwaZulu-Natal, South Africa

Information regarding polychlorinated biphenyls (PCBs) in environmental media in Africa is limited. This paper presents results of a monitoring program conducted in KwaZulu-Natal Province, South Africa designed to characterize levels, trends and sources of airborne PCBs. Particulate and vapor samples were sampled over the 2004-2005 period at three sites. The total PCB concentration averaged 128 ± 47 pg m⁻³, and levels were highest in winter. Tri- through hexa-congeners predominated, and the vapor fraction was predominant. Several tetra- through hexa-chlorinated congeners had levels comparable to those at urban sites in the northern hemisphere, but hepta- through deca-congeners resembled levels at background sites. PCB source areas, deduced using spatial and temporal patterns, compositional information and trajectory analyses, likely included local, regional and global sources. Soils at three rural sites showed high PCB concentrations, and milk from a local dairy showed PCB concentrations comparable to USA levels in year 2000.     

An investigation of interurban variations in the chemical composition and mutagenic activity of airborne particulate organic matter using an integrated chemical class/bioassay system

Previous investigations in this laboratory have demonstrated that the mutagenic activities of extractable particulate organic matter (EOM) from cities which differ in their principal fuels and meteorology can vary significantly. To gain a better understanding of these interurban variations, an Integrated Chemical Class/Biological Screening System was developed and used for a more detailed examination of differences in the chemical composition and mutagenic activity of EOM. The screening system involved coupling in situ Ames mutagenicity determinations on high performance thin layer chromatography (HPTLC) plates with class specific chemical analyses on a second set of plates. The system was used to screen for mutagenic activity and selected chemical classes (including PAH, nitro-PAH, phenols, carboxylic acids, carbonyls, aza-arenes and alkylating agents) in EOM from the following sites: New York City; Elizabeth, N.J.; Mexico City; Beijing, China; Philadelphia, PA; and the Caldecott Tunnel (CA).The results of this study demonstrated mutagenic activity and chemical compositional differences in HPTLC subfractions of particulate organic matter from these cities and from the Caldecott Tunnel. The greatest interurban differences in chemical classes were observed for the phenols, carbonyl compounds and alkylating agents. Interurban variations in mutagenic activities were greatest for EOM subfractions of intermediate polarity. These differences are probably related to interurban differences in the fuels used, types of sources and atmospheric conditions. The relationships between these variables are not well understood at present.     

Heavy metals, polycyclic aromatic hydrocarbons and polychlorinated biphenyls in surface sediments of the Naples harbour (southern Italy)

The Naples's harbour is one of the largest and most important commercial and tourist port of the Mediterranean basin. It is located on the southeast coast of Italy and receives industrial and municipal wastewaters from the city of Naples. Due to its social and economic impact, a comprehensive assessment of levels and sources of contamination of bottom sediments in this area of the Mediterranean basin is essential to identify potential danger due to mobilization of contaminants produced by managing of the same sediments. In this study, superficial sediments collected from 189 sampling sites were analyzed for grain size, heavy metals (Cr, Cu, Ni, Pb, V, Zn, Co, Sn, Cd, Hg, As, Al and Fe), 16 priority polycyclic aromatic hydrocarbons (PAHs) and perylene and 38 individual polychlorinated biphenyl (PCB) congeners. Compared to the estimated local background, Cu, Zn, Pb, Cd, Sn and Hg show enrichment factors >3 and only Hg evidences a median value higher than the NOAA (effects range - median) guidelines. Principal component analysis allowed us to clearly discriminate two areas mainly affected by heavy metals contamination and influenced by different sources related to industrial, commercial and/or urban activities. Priority PAHs are predominantly represented by three-five-ring compounds with concentrations ranging between 9 and 31774 ng g(-1) and frequently higher than the NOAA ER-M index. A prevalent pyrolitic origin of PAH was assessed on the basis of the relative abundance of the different congeners and selected isomer ratios. The concentrations of PCBs, as sum of the 38 congeners, ranged from 1 to 899 ng g(-1), with a predominance of highly chlorinated (tetra- and penta-chlorobiphenyls) congeners. WHO-TEQ values, calculated for the PCDD-like PCB congeners, suggest a relatively high level of toxicity. Generally, the concentration of PAHs and PCBs were higher near the sites of intense industrial, shipping and/or commercial activities suggesting a direct influence of these sources on the pollutant distribution patterns.     

Waste recycling of cathode ray tube glass through industrial production of transparent ceramic frits

ABSTRACT

Cathode ray tube (CRT) glass contains significant amounts of alkali and alkaline earth oxides, making it a useful by-product for use in the ceramics industry. Among the various alkali oxides present, those of strontium (SrO), calcium (CaO), and magnesium (MgO) are well known flux materials used widely in the ceramics industry. The most effective flux, SrO, is also a limited resource. In this study, we aimed to develop an environmentally friendly, low-cost method for recycling CRT waste by using it to produce transparent ceramic frits on an industrial scale. Four different samples were fabricated containing between 13 and 25 wt.% CRT panel glass. The color values, sintering behaviors, phases, and microstructural properties of the corresponding samples were analyzed and compared. The results indicate that a composition containing 25 wt.% CRT panel glass could pass the ISO 10545 test. Thus, the results confirm that CRT glass can be used to inexpensively produce transparent ceramic frits at an industrial scale.

Implications: The recycling of electronic waste (e-waste), including CRT waste, has increased by high rates of computer and TV consumption. This increase in consumption is likely to increase the rate at which CRTs are discarded. However, CRTs cannot be recycled in the desired amount. Owing to the high silicate, barium and strontium content of CRTs, it has great potential for glass ceramics such as frits. CRT panel glass to produce commercial transparent frit at low cost through an industrial production route for use in single-fire sintered products. Thus, CRT wastes can be recycled cost-effective, sustainable and environmentally friendly.     

Air Pollution Damage to Exterior Household Paints

ABSTRACT

The present study focuses on the elemental characterization of fine and coarse particles collected at a coastal site of southwestern Italy, in a suburban area of the Calabria region. A chemical tracer analysis was carried out to identify the major emission sources influencing on the atmospheric aerosol levels. Size-resolved particulate samples were collected during three 2-week seasonal sampling campaigns: autumn (19 October to 2 November 2003), winter (19 January to 2 February 2004) and spring (26 April to 10 May 2004). Ambient concentrations of selected elements (Fe, Mn, Mg, Ca, V, Cu, Cr, Ni, Zn, Pb, and Cd) associated to fine and coarse size fractions were determined using atomic absorption spectrometry (AAS). The enrichment factor method was applied, suggesting a prevailing anthropogenic component for all the detected elements, with Fe, Mg, Mn, and Ca as exceptions. Trajectory sector analysis was used in order to discriminate the influence of different air mass origins and paths. Long-range transport from both the continental Europe and the Saharan region proved to be the main influencing factors. African dust outbreaks, whose occurrence frequency was greater during the autumn and spring seasonal monitoring periods, gave rise to a total of eight exceedances of the European Commission (EC) PM₁₀ daily limit value as well as an increase in values of the crustal-derived elements (Fe, Mg, and Ca). Long-range transport from the heavily industrialized area of Central/Eastern Europe contributed to the high levels of Zn, Cd, and Pb that were recorded during the winter sampling campaign. Seasonal trend and comparison with measurements previously performed across the Mediterranean basin were also presented and discussed.

IMPLICATIONS This paper, which investigates both natural and anthropogenic aerosol sources, contributes to the characterization of fine and coarse particles in a suburban area of the southern Italian region of Calabria whose air quality assessment is still being defined. The monitoring site involved in this study, located at the interface between continental Europe and the Mediterranean basin, offers an important platform to study the influence of seasonal meteorology and predominant circulation patterns on the aerosol concentration levels and their chemical composition.     

A simplified approach to the indirect evaluation of the chemical composition of atmospheric aerosols from PM mass concentrations

The present work shows a straightforward procedure to indirectly estimate the chemical composition at a given site only from the determination of the PM concentrations, and the classification of the days according to the main meteorological scenarios. A previous study based on the mean chemical composition associated to the main meteorological scenarios is required.This experiment has been carried out with data from two monitoring sites in the North-Western Mediterranean, one regional and one suburban background. At both sites, one-year datasets on chemical PM₁₀ composition were obtained. Based on these datasets, the mean PM₁₀ compositions according to the most relevant meteorological situations were calculated for both locations. After that, the reconstruction of the chemical composition for all the days with available PM₁₀ concentrations was completed. Subsequently, the estimated PM₁₀ composition was compared with that determined experimentally. The comparison between the rebuilt and the experimental results was very satisfactory in the case of the regional background site, and relatively replaced in the other case. Furthermore, the validation of the method at the regional background site has been conducted from the reconstruction of a 4-year data base, and subsequent comparison with the experimental chemical composition.Our results show that it is possible to attain a good approach to the chemical composition at regional background sites, where local emission sources are negligible. Conversely, when the local sources rise in importance, i.e., at a suburban background site, the approach is suitable only for those components with a more regional origin and/or those from long range transport of air masses.     

Food (miles) for Thought - Energy Balance for Locally-grown versus Imported Apple Fruit (3 pp)

- This commentary compares the primary energy requirement for apples (cultivar ‘Braeburn’), which were either imported or locally-grown in Meckenheim, Germany. Imported apples of the same cultivar were grown in a Southern hemisphere winter in Nelson, Southland, New Zealand, and were picked at the end of March with subsequent 28 d transport by sea for sale in April in Germany. Locally-grown apples (cultivar ‘Braeburn’) were picked in mid-October and required a primary energy of nearly 6 MJ/kg of fruit including 0.8 MJoule/kg for five months CA storage at 1°C during a Northern hemisphere winter until mid-March. This compared favourably with 7.5 MJoule/kg for overseas shipment from New Zealand, i.e. a ca. 27% greater energy requirement for these imported fruits. Overall, the primary energy requirement of regional produce, stored several months on-site, partially compensated for the larger energy required to import fresh fruit from overseas. This result is in marked contrast to reported overestimates of a reported up to 8-fold energy requirement for domestic versus imported apple juice concentrate [7]. Our own findings of less primary energy required for domestic apple fruit is discussed with respect to providing local employment, fruit orchards preserving the countryside, quality assurance systems for local fruit such as QS and EUREP-GAP, networking and other factors favouring regional production.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in marine mussels from French coasts: levels, patterns and temporal trends from 1981 to 2005

The levels and temporal trends of toxic polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were determined in archived marine mussels collected between 1981 and 2005 from selected sites along French coasts. The geographical distribution and levels of PCDD/Fs generally reflect regional inputs of these contaminants: the highest concentrations were determined in samples from the Seine river estuary (English Channel) and Toulon area (Mediterranean coast); the lowest levels were determined in Corsica (Mediterranean Sea). PCDD/F isomeric composition showed a fairly homogeneous distribution pattern throughout the various sampling sites. This pattern, dominated by 2,3,7,8-TCDF and OCDD, can be considered as typical for the study species. However, on a more local scale, some differences in isomeric composition in mussels were identified in relation to local source characteristics. The time trend study showed a pronounced decrease in PCDD/F concentrations over the 24-year period at most sites, except Toulon on the Mediterranean Sea, where the decrease was not significant. This overall decrease probably reflects the general drop in PCDD/F emissions in Europe since 1980. However, high concentrations were determined in mussels collected in recent years (1999, 2001 and 2005) from the mouth of the Seine river. These concentrations are related to particular hydrological conditions, and intensive sediment dredging due to a new port construction at the mouth of the estuary. The results presented in this paper provide reference data on the contamination of shellfish by persistent organic pollutants in the marine environment.     

Interlaboratory comparison of Receptor Model results for Houston aerosol

In exercises for the Mathematical and Empirical Receptor Models Workshop (Quail Roost II), nine investigators independently applied receptor models to apportion ambient aerosol mass concentrations to components from emission sources in Houston, TX. The receptor model results were based upon ambient aerosol compositional data supplied to investigators that included mass, elemental and ionic species concentrations for consecutive 12-h sampling periods at the University of Houston between 10 and 19 September 1980. Some investigators performed additional analyses by X-ray powder diffraction, scanning electron microscopy with automated image analysis and X-ray energy spectroscopy and light microscopy. In most cases, the fine (0.2–2.5 μm) and coarse (2.5–15 μm) fractions were analyzed separately by the receptor models. The models tested include effective variance type chemical mass balance, weighted ridge regression, multiple linear regression, factor analysis and target transformation factor analysis. The number of source classes determined ranged from 4 (by multiple linear regression) to 23 (by light microscopy). Results are presented and compared in eight general emissions categories.     

Aerosol and ozone observations during six cruise campaigns across the Mediterranean basin: temporal,spatial, and seasonal variability

The Mediterranean basin, because of its semi-enclosed configuration, is one of the areas heavily affected by air pollutants. Despite implications on both human health and radiative budget involving an increasing interest, monitoring databases measuring air pollution directly over this area are yet relatively limited. Owing to this context, concentrations of fine (PM_2.5) and coarse (PM_2.5–10) particles along with other ancillary data, such as ozone levels and meteorological parameters, were measured during six cruise campaigns covering almost the whole Mediterranean basin. Elemental composition of both PM_2.5 and PM_2.5–10 was also determined to identify specific tracers for different classes of particles that can be found in the Mediterranean atmosphere. Outcomes resulting from the integration of a preliminary qualitative examination with a more quantitative analysis, based on receptor modelling, suggested that European continental influence, Saharan dust outbreaks, wildfire events, sea spray and fossil fuel combustion were the leading causes of the aerosol-ozone variations within the Mediterranean basin. Shipping emissions, consisting in both local harbours and maritime traffic across the basin, were also tested using the marker ratio of V/Ni. Peak values observed for coarse fraction have shown to be driven by the occurrence of African dust events. Considering the major influence of Continental pollution and wildfire events, the spatial variability resulted in larger fine particle concentrations and higher ozone levels over the Eastern Mediterranean side in comparison to the Western one.     

Adsorption and desorption characteristics of hydrophobic pesticide endosulfan in four Indian soils

Adsorption and desorption characteristics of endosulfan in four Indian soils were studied extensively. The soils used were clayey soil (CL--lean clay with sand), red soil (GM--silty gravel with sand), sandy soil (SM--silty sand with gravel) and composted soil (PT--peat) as per ASTM (American Society for Testing and Materials) standards. Adsorption and desorption rates were calculated from kinetic studies. These values varied for alpha and beta endosulfan depending on the soil type. Maximum specific adsorption capacities (qmax) for different soils were calculated by Langmuir model. The values varied from 0.1 to 0.45 mg g(-1) for alpha endosulfan and 0.0942-0.2722 mg g(-1) for beta endosulfan. Maximum adsorption took place in clay soil followed by composted soil and red soil. Adsorptions of alpha and beta endosulfan were negligible in sand. The binding characteristics of various functional groups were calculated using Scatchard plot. Effect of functional groups was more predominant in clayey soil. Organic matter also played a significant role in adsorption and desorption of endosulfan. Endosulfan adsorption decreased drastically in clay soil when the pH was reduced. Desorption was higher at both acidic and alkaline pH ranges compared to neutral pH. Results indicated that alpha endosulfan is more mobile compared to beta endosulfan and mobility of endosulfan is maximum in sandy soil followed by red soil. It can be inferred that crystal lattice of the clay soil plays a significant role in endosulfan adsorption and desorption. Immobilization of endosulfan is more advisable in clay soil whereas biological and or chemical process can be applied effectively for the remediation of other soil types.     

Monitoring of sources and atmospheric processes controlling air quality in an urban Mediterranean environment

Different monitoring parameters (PM mass concentrations, number–size distribution, black carbon, gaseous pollutants, and chemical composition, among others) are currently used in air quality studies. Urban aerosols are the result of several sources and atmospheric processes, which suggests that a single monitoring technique is insufficient to quantitatively evaluate all of them.This study assesses the suitability of a number of monitoring techniques (PM mass concentrations, number and size distribution of ultra-fine particles, levels of gaseous pollutants, and a complete chemical characterization of PM₁₀ and PM_2.5) by examining the response of those techniques to the different emission sources and/or atmospheric processes affecting an urban Mediterranean area (Barcelona, NE Spain).The results of this work reveal that the PM mass, the number concentration and the chemical composition give different, but complementary, information. Whereas the mineral matter, a key atmospheric aerosol component across the Mediterranean, is not properly quantitatively assessed by measuring sub-micrometric particles, the monitoring of the number concentration is indispensable to interpret the origin of specific aerosol episodes. Furthermore, the chemical composition yields very relevant information to deduce the causes of specific pollution episodes.The number concentration of ultra-fine particles in urban areas is strongly dependent upon vehicle exhaust emissions, which may cause adverse health impacts. Moreover, urban Mediterranean environments are favourable to produce nucleation-mode particles (<20 nm) with photochemical origin. In those cases, these particles are expected to be of high solubility and consequently their toxicity may differ from that of traffic-generated ultra-fine particles. Thus, the use of a single monitoring parameter to evaluate the health effects seems to be not enough.