Processing of Straw/Corn Stover: Comparison of Life Cycle Emissions

The LCA emissions from four renewable energy routes that convert straw/corn stover into usable energy are examined. The conversion options studied are ethanol by fermentation, syndiesel by oxygen gasification followed by Fischer Tropsch synthesis, and electricity by either direct combustion or biomass integrated gasification and combined cycle (BIGCC). The greenhouse gas (GHG) emissions of these four options are evaluated, drawing on a range of studies, and compared to the conventional technology they would replace in a western North American setting. The net avoided GHG emissions for the four energy conversion processes calculated relative to a “business as usual” case are 830 g CO₂e/kWh for direct combustion, 839 g CO₂e/kWh for BIGCC, 2,060 g CO₂e/L for ethanol production, and 2,440 g CO₂e/L for FT synthesis of syndiesel. The largest impact on avoided emissions arises from substitution of biomass for fossil fuel. Relative to this, the impact of emissions from processing of fossil fuel, e.g., refining of oil to produce gasoline or diesel, and processing of biomass to produce electricity or transportation fuels, is minor.     

Effects of Land Use Intensification on Fish Assemblages in Mediterranean Climate Streams

Southern Portugal is experiencing a rapid change in land use due to the spread of intensive farming systems, namely olive production systems, which can cause strong negative environmental impacts and affect the ecological integrity of aquatic ecosystems. This study aimed to identify the main environmental disturbances related with olive grove intensification on Mediterranean-climate streams in southern Portugal, and to evaluate their effects on fish assemblage structure and integrity. Twenty-six stream sites within the direct influence of traditional, intensive, and hyper-intensive olive groves were sampled. Human-induced disturbances were analyzed along the olive grove intensity gradient. The integrity of fish assemblages was evaluated by comparison with an independent set of least disturbed reference sites, considering metrics and guilds, based on multivariate analyses. Along the gradient of olive grove intensification, the study observed overall increases in human disturbance variables and physicochemical parameters, especially organic/nutrient enrichment, sediment load, and riparian degradation. Animal load measured the impact of livestock production. This variable showed an opposite pattern, since traditional olive groves are often combined with high livestock production and are used as grazing pasture by the cattle, unlike more intensive olive groves. Stream sites influenced by olive groves were dominated by non-native and tolerant fish species, while reference sites presented higher fish richness, density and were mainly occupied by native and intolerant species. Fish assemblage structure in olive grove sites was significantly different from the reference set, although significant differences between olive grove types were not observed. Bray–Curtis similarities between olive grove sites and references showed a decreasing trend in fish assemblage integrity along the olive grove intensification gradient. Olive production, even in traditional groves, led to multiple in-stream disturbances, whose cumulative effects promoted the loss of biota integrity. The impacts of low intensity traditional olive groves on aquatic ecosystems can be much greater when they are coupled with livestock production. This paper recommends best practices to reduce negative impacts of olive production on streams, contributing to guide policy decision-makers in agricultural and water management.     

Organic olive orchards on sloping land: More than a specialty niche production system?

Five organic Sloping and Mountainous Olive Plantation Production Systems (SMOPS) have been studied in four olive-producing areas in four European countries (Spain, Italy, Greece and Portugal). Results indicate that these SMOPS provide ecological, economic and social benefits to the regions in which they are located, although most of these benefits are not strictly limited to the organic production systems. Erosion control and organic matter balance remain significant issues in four of the SMOPS and we suggest that subsidy support should be conditional on the implementation of additional soil and water conservation measures that should be provided with specific funding. Most of the SMOPS will remain dependent on a similar level of support in order for olive production to remain economically feasible. The lower profitability compared to non-organic olive production systems suggests that there is limited scope for expansion of organic olive production, although in the study areas where there is little such production, such as Western Crete (Greece) and Basilicata-Salerno (Italy) the scope remains great. The analysis of the reasons for the beneficial effects of olive cultivation in the areas studied indicates that in most cases soil management techniques adopted in or recommended for organic production systems could provide similar benefits in other production systems as well.     

OLIVERO: the project analysing the future of olive production systems on sloping land in the Mediterranean basin

From 2003 to 2006, a consortium of six European partners analysed the future of olive production systems on sloping land in the Mediterranean basin. Olive production on such land dates back to pre-Roman times, but the production systems (known by the acronym SMOPS, for "Sloping and Mountainous Olive Production Systems"), are under threat. Many are unsustainable environmentally (erosion hazard), socially (exodus of young people) or economically (high labour costs). The OLIVERO research project was possible thanks to a grant of euro1.5 million from the European Union, which gives out euro2.5 billion in subsidies annually for olive production. An extended survey conducted by the project in five sites in Portugal, Spain, Italy and Greece revealed the diversity and multifunctionality of SMOPS. Four main systems were identified as important for the future: traditional, organic, semi-intensive and intensive. The conceptual framework of OLIVERO involved six phases, ranging from the initial survey up to policy recommendations. In all phases there was intensive contact with stakeholders and institutions. End-users were identified at three levels: local, intermediate and regional, and national/international. This paper presents the highlights of the physical analysis of land and water resources, crop and land management, and economics and policies. Scenario studies gave insight into the possible future: some SMOPS will be gradually abandoned or transformed into nature conservation areas, others will exploit drip irrigation and follow the intensification patterns of agriculture in the valleys, and a third group will continue to be managed more extensively, perhaps augmenting their income with other activities (possibly off-farm) or turning to organic production systems. At the five international OLIVERO meetings held from 2003 to 2006, knowledge, experience and ideas on the future of olive production systems were intensively exchanged. A network was established for ongoing and future cooperation. Two end-user seminars were held in Matera (Italy) and Lisbon. Over 70 scientific papers have been published.     

Comparative Life Cycle Assessment of Lignocellulosic Ethanol Production: Biochemical Versus Thermochemical Conversion

Lignocellulosic biomass can be converted into ethanol through either biochemical or thermochemical conversion processes. Biochemical conversion involves hydrolysis and fermentation while thermochemical conversion involves gasification and catalytic synthesis. Even though these routes produce comparable amounts of ethanol and have similar energy efficiency at the plant level, little is known about their relative environmental performance from a life cycle perspective. Especially, the indirect impacts, i.e. emissions and resource consumption associated with the production of various process inputs, are largely neglected in previous studies. This article compiles material and energy flow data from process simulation models to develop life cycle inventory and compares the fossil fuel consumption, greenhouse gas emissions, and water consumption of both biomass-to-ethanol production processes. The results are presented in terms of contributions from feedstock, direct, indirect, and co-product credits for four representative biomass feedstocks i.e., wood chips, corn stover, waste paper, and wheat straw. To explore the potentials of the two conversion pathways, different technological scenarios are modeled, including current, 2012 and 2020 technology targets, as well as different production/co-production configurations. The modeling results suggest that biochemical conversion has slightly better performance on greenhouse gas emission and fossil fuel consumption, but that thermochemical conversion has significantly less direct, indirect, and life cycle water consumption. Also, if the thermochemical plant operates as a biorefinery with mixed alcohol co-products separated for chemicals, it has the potential to achieve better performance than biochemical pathway across all environmental impact categories considered due to higher co-product credits associated with chemicals being displaced. The results from this work serve as a starting point for developing full life cycle assessment model that facilitates effective decision-making regarding lignocellulosic ethanol production.     

Biorefinery study of availability of agriculture residues and wastes for integrated biorefineries in Brazil

Brazil has a great potential for use renewable raw materials in biorefineries. It is one of the largest producers of agricultural and animal commodities, which produce large amounts of residues and wastes. These agricultural residues and animal waste can be effectively transformed to energy and other products in systems similar to a ethanol refinery where an integrated process involves conversion for biomass into fuel, energy and chemicals, integrated in the context of a biorefinery. The objective of this work is the determination of the actual availability of main agricultural residues and animal wastes generated in Brazil and of their generation potential index and their prospects for 2020. The results indicate that the sugarcane has the highest agronomic availability, reaching 157 million tons of fresh material and an estimated reuse potential of 19.6 million tons (dry basis), followed by soybeans, rice, maize, orange, wheat, cotton, cassava and tobacco.     

Agronomic application of olive mill wastewaters with phosphate rock in a semi-arid Mediterranean soil modifies the soil properties and decreases the extractable soil phosphorus

Olive mill wastewater (OMW), a by-product of the olive-mill industry, is produced in large amounts in Mediterranean countries. The presence of indigenous phosphate deposits in some countries like Tunisia provides an incentive for direct application or local chemical treatment at low cost to improve the solubility of low reactive phosphate rocks (PRs). The use of naturally occurring low-molecular weight organic acids (LMWOAs) that are present in OMW represents a new perspective in PR research and a possible solution for the recycling of the OMW. The present work was aimed at evaluating, under natural situations (field of olive trees), the effects of agronomic application of OMW (amounts applied: 30, 60 m(3) ha(-1)) with PR (amounts applied: 150 kg ha(-1)) on olive trees soil properties. We measured organic C, nitrogen (N), extractable phosphorus (P), exchangeable calcium (Ca), and exchangeable potassium (K), as well as other properties (pH and electrical conductivity). Our data provide evidence that agronomic application of OMW with PR has important effects on soil properties. Increases in organic C, total N, extractable P and exchangeable potassium (K) were found after the first agronomic application of OMW and PR. These increases were only temporary, following the second agronomic application of OMW and PR, significant reductions were detected in the extractable soil P (19.67 mg kg(-1) in the control soil vs. 8.99 mg kg(-1) in the amended soil). Changes in the extractable soil P could alter plant productivity and plant community structure because shifts in nutriment availability can affect the balance between limiting and non-limiting nutrients.     

China

For the first time since the mid-1960s, China became a net oil importer in 1993. That the country will remain a net oil importer is inevitable and probably irreversible for the foreseeable future. In the period to 2000, its crude oil production is projected to increase only 2% annually, while demand for refined oil products is expected to grow at 6.6% per annum. As a result, China's net oil imports are expected to reach 1.3 million barrels per day in 2000, accounting for almost one-third of its projected oil consumption. Most of the imports will come from the Middle East, and China's dependence on Middle Eastern oil is expected to increase significantly in the future .     

Traditional olive orchards on sloping land: Sustainability or abandonment?

Traditional olive orchards account for a large share of the area under olives in the EU, particularly in marginal areas, like those analysed in the OLIVERO project. In general, traditional olive growing can be described as a low-intensity production system, associated with old (sometimes very old) trees, grown at a low density, giving small yields and receiving low inputs of labour and materials. Though such systems are environmentally sustainable, their economic viability has become an issue, since EU policies favour more intensive and competitive systems. Orchards that have not been intensified seem to be threatened by the recent reform of the EU olive and olive oil policy, as income support has been decoupled from production. The main purpose of this paper is to identify the present constraints to traditional olive growing, and to recommend some private and public interventions to prevent its abandonment. During the OLIVERO project, traditional olive production systems were identified and described in five target areas (Trás-os-Montes-Portugal, Cordoba and Granada/Jaen-Spain, Basilicata/Salerno-Italy, and West Crete-Greece). The causes and consequences of abandonment are discussed, based on the analysis of the costs and returns, which revealed that these systems are barely economically sustainable. Their viability is only assured if reduced opportunity costs for family labour are accepted, and the olive growing is part-time. Based on these results, recommendations are made to prevent the abandonment of traditional olive growing and to preserve its environmental benefits.     

Industry to Industry By-products Exchange Network towards zero waste in palm oil refining processes

This paper presents a systematic framework for optimal utilization of by-products generated during crude palm oil refining processes. Three by-products are considered in the supply chain network: soapstock, palm fatty acid distillate (PFAD) and spent bleaching earth (SBE). These by-products, generated from neutralization, deodorization and bleaching processes, are viable feedstocks to other commercial industries such as animal feed, biodiesel, lubricant and soap. The case study is formulated as Mixed Integer Linear Programming (MILP) and integrated into the framework with the objective to maximize the refinery's profit as well as moving towards a conscious mindset of zero waste. This is the first time that such framework is developed and applied for the palm oil industry. The framework is called as Industry to Industry By-products Exchange Network (I2IBEN). An illustrative case study demonstrates a significant potential profit of MYR182, 893 per month.     

Rural development and ecological management of endogenous resources: the case of mountain olive groves in Los Pedroches comarca (Spain)

In this paper, we explore the dissemination potential of organic farming in Andalucía, using the case of Olivarera de los Pedroches, a small farmer cooperative. This will be done in the search for an agroecological strategy in the olive tree organic agricultural sector. A comparative analysis of organic and conventional olive oil production is made: both in economic terms, and regarding employment creation, taking into account its environmental benefits. This will permit us to shed light on certain elements necessary in the design of rural policies linked to this economic sector, and in the family farming social stratum. After a brief analysis of the Andalucían inequality structure in rural areas—both historically and at present times—this work presents the following issues: (i) a systematic characterization of European olive cultivation, with special reference to the Spanish and Andalucían situations; (ii) an exploration of the socio-economic impact of the case study within the context of the major actors involved, and their relations in terms of its reproducibility, taking into account their relationships with institutional and policy arrangements. Organic agriculture in Spain has developed slowly since 1995—the year in which aid towards this type of production began to be established—and, at present, begins to show an exponential increase. Many farmers began the transition to ecological handling of olive groves. Consequently, the organic management of the olive groves and the sale of organic olive oil can be a stimulus to farmers to increase their profits. Hence, it can be a fundamental pillar on which to establish rural development in areas with a high level of importance concerning this crop. In this work, data clearly show that, in spite of high costs, organic olive farming has advantages over conventional agriculture in terms of incomes and employment. Copyright © 2001 John Wiley & Sons, Ltd.     

Utilising of the oiled rolling mills scale in iron ore sintering process

Up to 5% of steel is lost with the scale at hot rolling operation. This waste contains 69-72% of iron in the form of oxides. However, its recycling is confronted with presence of up to 20% of oil and 10% of water. E.g. when the oiled scale is introduced as an additive to the iron ore sintering mixture, incomplete combustion of liberated oil at heating during sintering process creates problems for gas cleaning and may even lead to damage of the equipment. A possibility to improve combustion of the scale's oil at the sintering process by preparation of a mixture with peat was shown in the laboratory experiments. Industrial trials demonstrate possibility to increase the oil combustion degree at sintering 2.7 times as much. Consumption of the oiled scale was increased from zero to 12.8 kg (in a form of scale-peat blend) per ton of sinter, which allows for closing the loop of this waste at the integrated steelmaking factory.     

Comparison of jatropha and karanja biofuels on their combustion characteristics

Biofuel blends produced from Jatropha (Jatropha curcas) and Karanja (Pongamia pinnata) oil were evaluated for their combustion properties. Two kinds of blends (regular diesel with Jatropha and Karanja oil) were prepared at 20% volume to the diesel and tested as alternative fuels in single cylinder (vertical), water-cooled, direct injection diesel engine at the rated speed of 1500 rpm. The performance of the engine in terms of thermal efficiency at full load for diesel was 30%. For Jatropha and Karanja biodiesel blends, the thermal efficiencies were 29.0% and 28.6%, respectively. The maximum cylinder pressure and ignition delay for biodiesel fuel blends are very close to that of regular diesel. Prolonged combustion was observed for Karanja oil blend in comparison to Jatropha oil blend. The combustion pattern also reveals the slow burning characteristics of vegetable oils and this study indicates that the blended biofuels have combustion characteristics that are similar to regular diesel fuels.     

Water Consumption in the Production of Ethanol and Petroleum Gasoline

We assessed current water consumption during liquid fuel production, evaluating major steps of fuel lifecycle for five fuel pathways: bioethanol from corn, bioethanol from cellulosic feedstocks, gasoline from U.S. conventional crude obtained from onshore wells, gasoline from Saudi Arabian crude, and gasoline from Canadian oil sands. Our analysis revealed that the amount of irrigation water used to grow biofuel feedstocks varies significantly from one region to another and that water consumption for biofuel production varies with processing technology. In oil exploration and production, water consumption depends on the source and location of crude, the recovery technology, and the amount of produced water re-injected for oil recovery. Our results also indicate that crop irrigation is the most important factor determining water consumption in the production of corn ethanol. Nearly 70% of U.S. corn used for ethanol is produced in regions where 10–17 liters of water are consumed to produce one liter of ethanol. Ethanol production plants are less water intensive and there is a downward trend in water consumption. Water requirements for switchgrass ethanol production vary from 1.9 to 9.8 liters for each liter of ethanol produced. We found that water is consumed at a rate of 2.8–6.6 liters for each liter of gasoline produced for more than 90% of crude oil obtained from conventional onshore sources in the U.S. and more than half of crude oil imported from Saudi Arabia. For more than 55% of crude oil from Canadian oil sands, about 5.2 liters of water are consumed for each liter of gasoline produced. Our analysis highlighted the vital importance of water management during the feedstock production and conversion stage of the fuel lifecycle.     

A review on the production of fermentable sugars from lignocellulosic biomass through conventional and enzymatic route—a comparison

The scarcity of fossil fuels has urged the economically developed countries to find the resources for an alternative energy sources. In apprehension to this, biofuels, like bioethanol and biobutanol, produced from lignocellulosic biomass were considered as potential alternative. There are several methods for the pretreatment of biomass before it is being used as a feedstock for the production of fermentable sugars. However, one of the crucial concerns here is to enumerate an economic pretreatment scheme that can be implemented in large scale for the production of mostly exposed cellulosic part from biomass. This will ensure an effective hydrolysis of cellulose for the production of fermentable sugars and the production of biobutanol from these derived sugars. Moreover, the keynote understanding of an effective fermentation is the production of less inhibitory compounds like furfural, hydroxymethyl furfural during the hydrolysis of cellulose. Enzymatic hydrolysis of cellulose was reported as the most efficient method is this aspect. Trichoderma sp. was found the mostly used resources for the enzyme called cellulase and Aspergillus sp. for hemicellulase enzymes. The most crucial part here is the isolation of proper enzyme that will increase the rate of hydrolysis. Moreover, selection of proper pretreatment process will be a key benefit to the production of fermentable sugars through enzymatic hydrolysis. Based on the biomass nature, the evaluated hot water pretreatment followed by enzymatic hydrolysis with a provision of enzyme reusability (like encapsulated or enzyme separation with membrane) seems to be promising for enhanced biofuel-production.     

Energy balance and global warming potential of corn straw-based bioethanol in China from a life cycle perspective

As the second largest corn producer in this world, China has abundant corn straw resources. The study assessed the energy balance and global warming potential of corn straw-based bioethanol production and utilization in China from a life cycle perspective. The results revealed that bioethanol used as gasoline and diesel blend fuel could reduce global warming potential by 10%–97% and 4%–96%, respectively, as compared to gasoline and diesel for transport. The total global warming potential, net global warming potential, net energy, and Net Energy Ratio per MJ ethanol generated from corn straw-based bioethanol system are estimated to be 0.20 kg CO₂-eq, 0.012 kg CO₂-eq, 0.60 MJ, and 1.87, respectively. By using sensitivity analysis, we found that the collected coefficient and compressing density of straw have a more obvious influence on energy balance; transportation distance has a more obvious influence on global warming potential emission factor. The by-products may be utilized as fertilizer, animal feed, cement replacement, or high-value lignin chemicals, which make a contribution to offsetting 0.28 MJ per MJ ethanol of energy consumption.     

An assessment of energy recovery methods applicable to domestic refuse disposal

Any recycled material for re-use must be competitive in both quality and cost when compared with virgin raw materials. In the case of domestic refuse these two constraints mean that direct recycling for materials re-use is very restricted and indirect uses are sought instead. One major area of indirect recycling is energy recovery. This paper presents economic analyses performed on a net energy output basis for incineration for both heat and electrical energy production and also for gas production by pyrolysis. Acid hydrolysis of refuse for the production of ethyl alcohol or protein is also presented and analysed in detail since by this means finite oil reserves are conserved. An economic case is made for further work in this area as it is shown to be the only refuse recycling process with the potential to accomplish both refuse disposal and energy recovery at costs substantially less than straight incineration.     

A Review of the External Positions of the Oil-Importing Developing Countries and their Relationship to the World Oil Market

Many oil-importing developing countries faced greater difficulties coping with the second oil shock (1979–80) than with the first (1973–74). The recent decline in oil prices has offset only a small part of the adverse effect of the earlier increases, and a number of these countries continue to face severe problems in servicing their external debt. This paper explores the reasons for these difficulties, which are associated in part with the higher levels of real interest rates in recent years and with the slowdown in economic activity in industrial countries. Estimates are provided of the effects of changing oil prices on the net real cost of oil imports in developing countries. The paper concludes with an assessment of the medium-term prospects for the financing of external deficits.     

Performance evaluation of Nahar oil–diesel blends in a single cylinder direct injection diesel engine

This study attempts to use plentiful available high oil content (67% of Nahar seed kernel) non-edible feedstock as a source for powering diesel engine. Various performance and emission characteristics of prepared Nahar oil–diesel blends (5%, 10%, 20%, 30%, and 40%) are analyzed in a single cylinder direct injection diesel engine at different load spectrum, in order to judge the optimum blend, which can be efficiently used in a diesel engine. 10% blending of Nahar oil with diesel fuel has shown a reduction in hydrocarbon and carbon monoxide emission by 8.64% and 8.34%, respectively. With the increase in blend concentration, the nitrogen oxide emission decreased considerably and smoke emission increased slightly. Further pressure crank angle and heat release rate analysis of 10% blending of Nahar oil with diesel confirms its smooth combustion inside the engine combustion chamber.     

Solid olive waste in environmental cleanup: oil recovery and carbon production for water purification

A potentially-economic three-fold strategy, to use solid olive wastes in water purification, is presented. Firstly, oil remaining in solid waste (higher than 5% of waste) was recovered by the Soxhlet extraction technique, which can be useful for the soap industry. Secondly, the remaining solid was processed to yield relatively high-surface area active carbon (AC). Thirdly, the resulting carbon was employed to reversibly adsorb chromate ions from water, aiming to establish a water purification process with reusable AC. The technique used here enabled oil recovery together with the production of a clean solid, suitable for making AC. This process also has the advantage of low production cost.