Attempt to adsorb N-nitrosamines in solution by use of zeolites

The strong adsorption of zeolite for N-nitrosamines in solution was first revealed by use of adsorption, and temperature programmed surface reaction (TPSR) techniques. N-nitrosodimethylamine (NDMA) and N-nitrosopyrrolidine (NPYR) as well as N-nitrosohexamethyleneimine (NHMI) can be adsorbed on zeolite Y, ZSM-5 and A in the solution of methylene chloride or water, which will be helpful for removal of the N-nitrosamines pollution in environmental protection. The equilibrium data were fitted to Freundlich-type isotherms, but the adsorption capacity of zeolites mainly depended on their pore size, surface area and acid-basic properties. Molecular size of adsorbate and solute-solvent interaction also strongly affected the adsorption of N-nitrosamines on zeolite in solution. The extraordinary adsorption properties of NaA zeolite for N-nitrosamines in aqueous solution is first reported and discussed.     

Fine route for an efficient removal of 2,4-dichlorophenoxyacetic acid (2,4-D) by zeolite-supported TiO2

Zeolites HY, Hbeta and HZSM-5 with different physico-chemical properties were chosen as support for TiO2 to illustrate their adsorption, dispersion and electronic structure in photocatalysis. The extent of TiO2 loading was monitored by XRD and BET surface area measurements. The adsorption capacity of HY zeolite was found to be high and hence chosen for further modification to continue the investigation. Photodegradation kinetics were carried out with 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solution. The extent of 2,4-D degradation on TiO2/HY loading revealed the importance of adsorption in photocatalysis. Mineralisation studies on all three zeolites with 1 wt.% TiO2 loading demonstrated the good dispersion properties of TiO2/HY. Its photocatalytic activity was found to be excellent with formulated 2,4-D. Comparison of relative photonic efficiencies demonstrated that supported photocatalysts exhibited higher activity than some of the commercial photocatalysts. The high activity of supported TiO2 is due to synergistic effects of improved adsorption of 2,4-D and efficient delocalisation of photogenerated electrons by zeolite support.     

Effective uptake of decontaminating agent (citric acid) from aqueous solution by mesoporous and microporous materials: an adsorption process

The presence of citric acid in decontamination waste can cause complexation of the radioactive cations resulting in interferences in their removal by various treatment processes such as chemical precipitation, ion-exchange, etc., which are employed for the removal of radioactivity and may cause potential danger to the environment. Mesoporous Al-MCM-41 (Si/Al=30, 51, 72 and 97) and Si-MCM-41 molecular sieves were synthesized hydrothermally and characterized by XRD, BET (surface area) and FT-IR to evaluate the removal of citric acid through an adsorption process. Adsorption of citric acid over Al-MCM-41 shows the applicability of Freundlich and Langmuir isotherm and follows first order kinetics. The effects of contact time, concentration of citric acid, adsorbents (various Si/Al ratios of Al-MCM-41, Si-MCM-41, Hbeta zeolite and commercial carbon) and pH have been investigated. It has been found that the amount of citric acid adsorbed per unit gram of catalyst followed the order Al-MCM-41 (Si/Al=30)>Al-MCM-41 (Si/Al=51)>activated charcoal>Al-MCM-41 (Si/Al=72)>Al-MCM-41 (Si/Al=97)>Si-MCM-41>Hbeta zeolite.     

Adsorption of arsenate on soils. Part 1: laboratory batch experiments using 16 Chinese soils with different physiochemical properties

Laboratory batch experiments were carried out to study the adsorption of arsenate on 16 Chinese soils with different physicochemical properties. Wide differences in arsenate adsorption were observed, and the Jiangxi and Hubei soils were more effective sorbents for arsenate than other soils. The Langmuir one-surface and two-surface equations were used to model the arsenate adsorption data. Except for the Jiangxi and Hubei soils, the Langmuir one-surface equation gave reasonably good fits to the arsenate adsorption data. However, the Langmuir two-surface equation generally provided a better fit than the Langmuir one-surface equation. For soils with relative high organic matter (OM), dissolved organic carbon (DOC) or extractable phosphate, the Langmuir one-surface and two-surface equations described the adsorption isotherms similarly. In contrast, for soils with relatively low contents of OM, DOC or extractable phosphate, the Langmuir two-surface equation gave the better fit to the arsenate adsorption data.     

胶质芽孢杆菌、黑曲霉及与沸石联合对模拟废水中Fe~（3＋）处理研究

研究沸石、胶质芽孢杆菌（Bacillus mucilaginosus）、黑曲霉（Aspergillus Niger）、胶质芽孢杆菌与沸石联合以及黑曲霉与沸石联合对模拟废水中Fe3＋的吸附等温曲线,分析它们对Fe3＋模拟废水的吸附及絮凝作用。结果表明：沸石对Fe3＋吸附作用符合Freundlich方程;胶质芽孢杆菌分泌含有—OH和COO-的胞外多糖,对Fe3＋具有较好的吸附效果;沸石与胶质芽孢杆菌联合对模拟废水中Fe3＋的处理,低浓度以沸石对Fe3＋的吸附为主,加入胶质芽孢杆菌絮凝剂使吸附了Fe3＋的沸石进行絮凝沉降,吸附等温曲线符合Langmuir吸附等温方程,高浓度两者共同作用使吸附量增加;黑曲霉对Fe3＋的吸附符合BET吸附等温方程;沸石与黑曲霉两者共同作用对Fe3＋模拟废水吸附等温曲线为直线。通过去除效果对比分析可知：胶质芽孢杆菌既有吸附又有絮凝功能;胶质芽孢杆菌絮凝剂无论是对Fe3＋的吸附还是对吸附Fe3＋沸石的絮凝都比黑曲霉对Fe3＋处理效果好;胶质芽孢杆菌和一些非金属矿物复合处理污染废水是一种无毒、低成本环保的处理方法,本研究将为它们在工程中的应用提供实践依据。     

Sorption of organic compounds to activated carbons. Evaluation of isotherm models

Sorption to ‘hard carbon’ (black carbon, coal, kerogen) in soils and sediments is of major importance for risk assessment of organic pollutants. We argue that activated carbon (AC) may be considered a model sorbent for hard carbon. Here, we evaluate six sorption models on a literature dataset for sorption of 12 compounds onto 12 ACs and one charcoal, at different temperatures (79 isotherms in total). A statistical analysis, accounting for differences in the number of fitting parameters, demonstrates that the dual Langmuir equation is in general superior and/or preferable to the single and triple Langmuir equation, the Freundlich equation, a Polanyi–Dubinin–Manes equation, and the Toth equation. Consequently, the analysis suggests the presence of two types of adsorption sites: a high-energy (HE) type of site and a low-energy (LE) type of site. Maximum adsorption capacities for the HE domain decreased with temperature while those for the LE domain increased. Average Gibbs free energies for adsorption from the hypothetical pure liquid state at 298 K were fairly constant at −15 ± 4 and −5 ± 4 kJ mol⁻¹ for the HE and LE domain, respectively.     

Prediction of the adsorption capacity for volatile organic compounds onto activated carbons by the Dubinin-Radushkevich-Langmuir model

Prediction of the adsorption capacity for volatile organic compounds (VOCs) onto activated carbons is elucidated in this study. The Dubinin-Radushkevich (D-R) equation was first used to predict the adsorption capacity of nine aromatic and chlorinated VOCs onto two different activated carbons. The two key parameters of the D-R equation were estimated simply from the properties of the VOCs using quantitative structure-activity relationship and from the pore size distribution of the adsorbent. The approach based on the D-R equation predicted well the adsorption capacity at high relative pressures. However, at the relative pressures lower than -1.5 x 10(-3), the D-R approach may significantly overestimate adsorption capacity. To extrapolate the approach to lower relative pressures, the integration of the D-R equation and the Langmuir isotherm, called the D-R-L model, was proposed to predict adsorption capacity over a wide range of relative pressures of VOCs. In this model, the Langmuir isotherm parameters were extracted from the predicted D-R isotherm at high relative pressures. Therefore, no experimental effort was needed to obtain the parameters of the D-R-L model. The model successfully predicted the adsorption capacity of aromatic and chlorinated hydrocarbons tested onto BPL and Sorbonorit B carbons over relative pressures ranging from 7.4 x 10(-5) to 0.03, suggesting that the model is applicable at the low relative pressures of VOCs often observed in many environmental systems. In addition, the molecular size of organic compounds may be an important factor affecting the adsorption capacity of activated carbons. For BPL carbon, an ultramicroporous adsorbent, the limiting pore volume Wo of the D-R equation decreased when the kinetic diameter of the adsorbate was larger than 6 angstroms. However, for Sorbonorit B carbon, no reduction of Wo was found, suggesting that the Wo may be related to the pore size distribution of the adsorbents, as well as to their molecular size. This size exclusion effect may play an important role in predicting the adsorption capacity of VOCs onto microporous adsorbents in the D-R-L model and in the corresponding D-R equation.     

The Langmuir two-surface equation as a model for cadmium adsorption on peat

The Langmuir isotherm equation is often used to describe the adsorption of cadmium on peat. If the total surface onsists of two or more populations of sites with different bonding energies, it is proposed that the Langmuir two-surface equation be used. The effects of the contact time and pH on adsorption were investigated in batch experiments. Adsorption batch isotherm studies were carried out by using 12 solutions with initial concentrations of 5–110 mg/l. The samples were analysed by using axial ICP-AES. Adsorption data were compared using four different linearizations (Lineweaver-Burk, Eadie-Hofstee, Scatchard and Langmuir linearizations). Better results among linearizations were found with the Langmuir linearization, but the results obtained by using the nonlinear regression were still the best. A new, nonlinear regression method for the calculation of the equation constants was created by using the system of equations and these findings were compared to the results found using earlier methods.     

Geochemistry of inorganic arsenic and selenium in a tropical soil: effect of reaction time, pH, and competitive anions on arsenic and selenium adsorption

Factors that can affect As and Se adsorption by soils influence the bioavailability and mobility of these elements in the subsurface. This research attempted to compare the adsorption capacities of As(III), As(V), Se(IV), and Se(VI) on a tropical soil commonly found in Singapore in a single-species system. The effect of reaction time, pH, and competitive anions at different concentrations on the adsorption of both As and Se species were investigated. The As and Se adsorption isotherm were also obtained under different background electrolytes. The batch adsorption experiments showed that the sequence of the As and Se adsorption capacities in the soil was As(V) > Se(IV) > As(III) > Se(VI). The adsorption kinetics could be best described by the Elovich equation. The adsorption of As(V), Se(IV), and Se(VI) appeared to be influenced by the variable pH-dependent charges developed on the soil particle surfaces. Phosphate had more profound effect than SO4(2-) on As and Se adsorption in the soil. The competition between PO4(3-) and As or Se oxyanions on adsorption sites was presumably due to the formation of surface complexes and the surface accumulation or precipitation involving PO4(3-). The thermodynamic adsorption data for As(V) and Se(IV) adsorption followed the Langmuir equation, while the As(III) and Se(VI) adsorption data appeared to be best-represented by the Freundlich equation.     

Modeling adsorption in multicomponent systems using a Freundlich-type isotherm

The suitability of a Freundlich-type isotherm, the Sheindorf-Rebuhn-Sheintuch (SRS) equation, to represent the competitive adsorption of Sr, Cs and Co in Ca-montmorillonite suspensions was investigated. Experimental adsorption data were obtained for systems containing these cations as single-component, binary and ternary mixtures. The competition coefficient α_ij, which were obtained based on the experimental adsorption data for bicomponent systems, can be viewed as a way to quantify competitive interactions. The competition coefficients obtained for the cations under consideration indicate that their competitive interactions are of similar magnitude, with the cation least affected by competitive effects being Cs, while the adsorption of Co was more significantly affected by the presence of Cs, and Sr by the presence of Co. After α_ij-values were substituted in the SRS equation, the adsorption of systems of three or more components could be predicted. To validate the SRS equation, the adsorption values predicted by this equation for the ternary mixture Sr---Cs--- Co were compared to values determined experimentally. The SRS equation successfully modeled adsorption for the range of concentrations that followed Freundlich behavior.     

活性炭吸附化学战剂--沙林染毒水的试验研究

研究了 5种国产活性炭吸附水中沙林的性能及影响因素。果壳质活性炭的吸附性能优于煤质活性炭。果壳活性炭WP 2 0 2的吸附等温线方程为 qe=11 45C0 39e ,其粉状炭在 10min时能达到吸附容量的 98%。活性炭颗粒小则吸附速度快 ,温度升高不利于吸附。活性炭与水中的氯反应后 ,吸附性能下降 3 0 % ,在含盐量 2 0 0 0mg/L的苦咸水中吸附量降低 5 %。处理化学战剂 -沙林染毒水宜多种水处理技术相结合 ,并采用活性炭吸附作为最后一级处理单元     

污泥活性炭对次甲基蓝废水的吸附

立足于污泥的资源化,利用化学活化法制得的污泥基活性炭,处理次甲基蓝染料废水.考察了污泥活性炭的粒径以及染料废水的pH值对染料脱色效果以及活性炭的吸附量的影响,并对吸附过程进行等温吸附线和吸附动力学分析.结果表明,在本研究的范围内,污泥活性炭的粒径越小、染料废水的pH值越高,则污泥活性炭对染料废水的吸附效果越好.当粒径在200目以上时,去除率及吸附量分别为88.2％和136.7 mg/g;当pH值为11时,去除率和吸附量分别为90.4％和91.9 mg/g.污泥活性炭对次甲基蓝染料的吸附脱除符合Langmuir吸附等温线和Lagergren准二级动力学方程.     

Adsorption mechanism of chloroacetanilide herbicides to modified montmorillonite

This study was undertaken to characterize the adsorption mechanism of alachlor and metolachlor on montmorillonite modified with cationic surfactants. Adsorbed amounts of cationic surfactant on montmorillonite surfaces were determined by CNHSO analyzer. Equilibrium concentrations of alachlor and metolachlor were determined by GC and adsorption results were fit to a linear regression equation. The slope of the isotherms (Kd) was normalized to the fraction of organic carbon on montmorillonite complexes to produce corresponding Koc. Adsorption of surfactants fit very well to Langmuir equation. Increased basal spacing indicates that surfactant molecules could penetrate through the interlayer spacing and arrange themselves in different ways. Equilibrium data of alachlor and metolachlor suggest that adsorption may occur via physical or chemical bonds. Koc values of alachlor or metolachlor decreased as the fraction of the organic carbon increased in montmorillonite complexes indicating independent adsorption process. Changes of the molar free energy of the adsorption reactions were in the range of physical adsorption, indicating that adsorption reactions are spontaneous and the molecules either adsorb on the surface or penetrate into the inter-layers of montmorillonite-surfactant complex. Careful investigation of the adsorption data suggests that interaction may occur via the active groups such as carbonyl group (-C=O), anilidic (C-N) group and/or phenyl rings. This information may provide better understanding on adsorption mechanism and be useful in designing ecologically acceptable herbicide formulations.     

改性沸石吸附低浓度氨氮废水及其脱附的研究

采用氯化钠溶液对浙江某地天然沸石改性,以低浓度氨氮废水为处理对象,比较了天然沸石和改性沸石的吸附等温线、吸附动力学和动态吸附,并进行了改性沸石的动态脱附研究.结果表明,沸石的平衡吸附量随着平衡浓度的增大而增大;Freundlich方程比Langmuir方程更好地描述沸石吸附低浓度氨氮废水的行为,改性沸石比天然沸石具有更...     

玉米秸秆活性炭的制备及其吸附动力学研究

以玉米秸秆为原材料,采用ZnCl2活化法制备玉米秸秆活性炭,吸附次甲基蓝染料废水,进行动力学分析。本实验用Langmuir和Freundlich模型对吸附等温线进行拟合,结果表明,玉米秸秆活性炭对次甲基蓝的吸附与Langmuir方程拟合良好,R2=0.9857。采用Lagergren准一级速率模型、Lagergren准二级速率模型、Bangham动力学方程和Elovich动力学方程分别对秸秆活性炭吸附次甲基蓝溶液进行吸附动力学拟合,通过分析得出吸附过程与Lagergren准二级速率模型拟合最好,R2=0.9979。秸秆活性炭对次甲基蓝的最大吸附量达到909.09 mg/g,具有很高的吸附能力。     

海藻酸钠-刺槐豆胶复合凝胶珠吸附孔雀绿简

以刺槐豆胶、海藻酸钠为材料制备复合凝胶珠,利用红外光谱、热重分析对其进行表征,探讨孔雀绿浓度、吸附时间及pH对复合凝胶珠吸附孔雀绿的影响。红外光谱和热重分析表明,复合凝胶珠制备成功且热稳定性介于刺槐豆胶和海藻酸钠之间。复合凝胶珠对孔雀绿的吸附在5 h后达到平衡,pH=6为最佳吸附pH,相同条件下复合凝胶珠对孔雀绿的吸附作用优于活性炭,其对孔雀绿的吸附行为符合Freundlich吸附等温方程和颗粒内扩散模型。海藻酸钠-刺槐豆胶复合凝胶珠有望成为新的处理印染废水的吸附剂。     

海藻酸钠-刺槐豆胶复合凝胶珠吸附孔雀绿

以刺槐豆胶、海藻酸钠为材料制备复合凝胶珠,利用红外光谱、热重分析对其进行表征,探讨孔雀绿浓度、吸附时间及pH对复合凝胶珠吸附孔雀绿的影响。红外光谱和热重分析表明,复合凝胶珠制备成功且热稳定性介于刺槐豆胶和海藻酸钠之间。复合凝胶珠对孔雀绿的吸附在5h后达到平衡,pH=6为最佳吸附pH,相同条件下复合凝胶珠对孔雀绿的吸附作用优于活性炭,其对孔雀绿的吸附行为符合Freundlich吸附等温方程和颗粒内扩散模型。海藻酸钠一刺槐豆胶复合凝胶珠有望成为新的处理印染废水的吸附剂。     

污泥基活性炭吸附Cu2+的应用研究

以城市污水处理厂剩余污泥为原料,以ZnCl₂为活化剂制取污泥基活性炭。以此污泥基活性炭为吸附剂,对含Cu²⁺的废水进行了吸附实验研究。考察了溶液pH值、Cu²⁺的起始浓度对Cu²⁺离子吸附量的影响;利用等温吸附实验作出吸附等温线,并考察了污泥基活性炭吸附剂吸附Cu²⁺的动力学方程。实验结果表明,污泥基活性炭对Cu²⁺具有良好的吸附性能。吸附的最佳pH值为5;吸附符合Langmuir和Freundlich吸附等温方程,吸附为优惠吸附,吸附量随着吸附质溶液浓度的增加而增大;吸附平衡时间为4 h,吸附动力学符合二级动力学方程。     

污泥基活性炭吸附Cu（2＋）的应用研究

以城市污水处理厂剩余污泥为原料,以ZnCl2为活化剂制取污泥基活性炭。以此污泥基活性炭为吸附剂,对含Cu2＋的废水进行了吸附实验研究。考察了溶液pH值、Cu2＋的起始浓度对Cu2＋离子吸附量的影响;利用等温吸附实验作出吸附等温线,并考察了污泥基活性炭吸附剂吸附Cu2＋的动力学方程。实验结果表明,污泥基活性炭对Cu2＋具有良好的吸附性能。吸附的最佳pH值为5;吸附符合Langmuir和Freundlich吸附等温方程,吸附为优惠吸附,吸附量随着吸附质溶液浓度的增加而增大;吸附平衡时间为4 h,吸附动力学符合二级动力学方程。     

4A沸石去除水中Pb2＋的研究

在静态条件下,研究了4A沸石对废水中Pb2＋的吸附性能,并探讨了影响吸附的因素。实验表明：当温度为30℃,废水pH为5～6,0．01g4A沸石对100mg／LPb2＋溶液10mL吸附20min,Pb2＋的去除率可达到99％以上。在实验研究条件下,4A沸石对Pb2＋的吸附符合Langmuir和Freundlich等温吸附方程,相关系数为0．9819和0．9998。经计算,4A沸石对Pb2＋的饱和吸附量为125mg／g。4A沸石吸附水中Pb2＋达到吸附平衡的时间较短;溶液pH值的变化对吸附效果影响不显著;温度从室温略微升高,Pb2＋的去除率略有增大。吸附在4A沸石上的Pb“可回收利用,处理后的4A沸石可以再生,且重复使用性能较好。