Megacities and atmospheric pollution

About half of the world's population now lives in urban areas because of the opportunity for a better quality of life. Many of these urban centers are expanding rapidly, leading to the growth of megacities, which are defined as metropolitan areas with populations exceeding 10 million inhabitants. These concentrations of people and activity are exerting increasing stress on the natural environment, with impacts at urban, regional and global levels. In recent decades, air pollution has become one of the most important problems of megacities. Initially, the main air pollutants of concern were sulfur compounds, which were generated mostly by burning coal. Today, photochemical smog--induced primarily from traffic, but also from industrial activities, power generation, and solvents--has become the main source of concern for air quality, while sulfur is still a major problem in many cities of the developing world. Air pollution has serious impacts on public health, causes urban and regional haze, and has the potential to contribute significantly to climate change. Yet, with appropriate planning, megacities can efficiently address their air quality problems through measures such as application of new emission control technologies and development of mass transit systems. This review is focused on nine urban centers, chosen as case studies to assess air quality from distinct perspectives: from cities in the industrialized nations to cities in the developing world. While each city--its problems, resources, and outlook--is unique, the need for a holistic approach to the complex environmental problems is the same. There is no single strategy in reducing air pollution in megacities; a mix of policy measures will be needed to improve air quality. Experience shows that strong political will coupled with public dialog is essential to effectively implement the regulations required to address air quality problems.     

A spatial multicriteria model for determining air pollution at sample locations

Atmospheric pollution in urban centers has been one of the main causes of human illness related to the respiratory and circulatory system. Efficient monitoring of air quality is a source of information for environmental management and public health. This study investigates the spatial patterns of atmospheric pollution using a spatial multicriteria model that helps target locations for air pollution monitoring sites. The main objective was to identify high-priority areas for measuring human exposures to air pollutants as they relate to emission sources. The method proved to be viable and flexible in its application to various areas.

Implications:?Spatial multicriteria models provide a tool for air pollution management in urban areas. Analytic hierarchy process (AHP) modeling can help with the process of prioritizing monitoring site locations and minimizing costs.     

Urban woodlands: their role in reducing the effects of particulate pollution

In recent years a substantial research effort has focused on the links between particulate air pollution and poor health. As a result the PM10 value has been set as a measure of such pollutants which can directly cause illness. Due to their large leaf areas relative to the ground on which they stand and the physical properties of their surfaces, trees can act as biological filters, removing large numbers of airborne particles and hence improving the quality of air in polluted environments. The role of vegetation and urban woodlands in reducing the effects of particulate pollution is reviewed here. The improvement of urban air quality achieved by establishing more trees in towns and cities is also illustrated.     

New indicator approaches for effective urban air quality management

Measurements of urban air quality at monitoring stations in developed countries have frequently involved the criteria gaseous pollutants, particulates, hazardous air pollutants, perceived air quality and relevant meteorological conditions. Large numbers of indicators have therefore been established to quantify emissions, concentrations and environmental and human health impacts of each of these groups of substances. To simplify the data for management, several indicators have been grouped together to form urban air quality indices but the weightings of individual variables is contentious. In industrialising and developing countries, data may be limited and traditional air pollutant indicators cannot often be constructed. The emphasis therefore has to be placed on the development of policy-relevant indicators, such as Response Indicators that reflect different policy principles for regulating air pollutant emissions. Indices that quantify the air quality management capabilities and capacities at the city level provide further useful decision-relevant tools. Four sets of indices, namely, 1. air quality measurement capacity, 2. data assessment and availability, 3. emissions estimates, and 4. management enabling capabilities, and a composite index to evaluate air quality management capability, were constructed and applied to 80 cities. The indices revealed that management capability varied widely between the cities. In some of the cities, existing national knowledge on urban air quality could have been more effectively used for management. It was concluded that for effective urban air quality management, a greater emphasis should be given, not just to monitoring and data capture programmes, but to the development of indicators and indices that empower decision-makers to initiate management response strategies. Over-reliance on restricted, predetermined sets of traditional air quality indicators should be avoided.     

Air Quality in Selected Megacities

Abstract

About half of the world's population now lives in urban areas because of the opportunity for a better quality of life. Many of these urban centers are expanding rapidly, leading to the growth of megacities, which are often defined as metropolitan areas with populations exceeding 10 million inhabitants. These concentrations of people and activity are exerting increasing stress on the natural environment, with impacts at urban, regional and global levels. In recent decades, air pollution has become one of the most important problems of megacities. Initially, the main air pollutants of concern were sulfur compounds, which were generated mostly by burning coal. Today, photochemical smog—induced primarily from traffic, but also from industrial activities, power generation, and solvents—has become the main source of concern for air quality, while sulfur is still a major problem in many cities of the developing world. Air pollution has serious impacts on public health, causes urban and regional haze, and has the potential to contribute significantly to global climate change. Yet, with appropriate planning megacities can efficiently address their air quality problems through measures such as application of new emission control technologies and development of mass transit systems.

This review is focused on nine urban centers, chosen as case studies to assess air quality from distinct perspectives: from cities in the industrialized nations to cities in the developing world. This review considers not only megacities, but also urban centers with somewhat smaller populations, for while each city—its problems, resources, and outlook—is unique, the need for a holistic approach to complex environmental problems is the same. There is no single strategy to reduce air pollution in megacities; a mix of policy measures will be needed to improve air quality. Experience shows that strong political will coupled with public dialogue is essential to effectively implement the regulations required to address air quality.     

Simulating urban-scale air pollutants and their predicting capabilities over the Seoul metropolitan area

Urban-scale air pollutants for sulfur dioxide, nitrogen dioxide, particulate matter with aerodynamic diameter > or = 10 microm, and ozone (O3) were simulated over the Seoul metropolitan area, Korea, during the period of July 2-11, 2002, and their predicting capabilities were discussed. The Air Pollution Model (TAPM) and the highly disaggregated anthropogenic and the biogenic gridded emissions (1 km x 1 km) recently prepared by the Korean Ministry of Environment were applied. Wind fields with observational nudging in the prognostic meteorological model TAPM are optionally adopted to comparatively examine the meteorological impact on the prediction capabilities of urban-scale air pollutants. The result shows that the simulated concentrations of secondary air pollutant largely agree with observed levels with an index of agreement (IOA) of >0.6, whereas IOAs of approximately 0.4 are found for most primary pollutants in the major cities, reflecting the quality of emission data in the urban area. The observationally nudged wind fields with higher IOAs have little effect on the prediction for both primary and secondary air pollutants, implying that the detailed wind field does not consistently improve the urban air pollution model performance if emissions are not well specified. However, the robust highest concentrations are better described toward observations by imposing observational nudging, suggesting the importance of wind fields for the predictions of extreme concentrations such as robust highest concentrations, maximum levels, and >90th percentiles of concentrations for both primary and secondary urban-scale air pollutants.     

Bioavailability evaluation,uptake of heavy metals and potential health risks via dietary exposure in urban-industrial areas

A verity of human activities i.e. urbanization and industrialization have been resulted serious environmental contaminations by heavy metals in all over the world. The settlement of populations in urban and nearby industrial areas for economic development has significant share in their exposure to these metallic contaminants. Depending on the nature and type of the pollutants, targeted urban-industrial environments can have harmful and chronic health risk impacts on exposed local inhabitants and may require detoxification, healing and remedial therapy. Consequently, environmental monitoring as well as human health risk assessments of urban environments under industrial influence are key dominant features. We believe this work will provide new insights into the studies of metals exposure and associated health risks in emerging industrials cities of developing countries. Present study aimed to study the bioavailability of metals, quantify the changeability in soil and vegetable metal concentrations and estimation of human health risks via dietary exposure, focusing on urban-industrial environment. Soil and vegetable samples were collected in six random sites within the urban, periurban and industrial areas and analyzed for metal concentrations. In addition, risk assessment model proposed by US-EPA was employed to estimate the potential health risk of heavy metals via dietary intake. Results indicated that the heavy metal concentrations were noteworthy in periurban and urban-industrial areas. However, contamination levels varied with the type of vegetable, and the point source pollution such as traffic, urban wastes and industrial effluent. According to the estimated THQ and HI values for non-carcinogenic risk, little or no negative impact of heavy metals was observed on local inhabitants. However, the concentrations of Cr, Cd, Pb and Ni were nearly closed to the permissible limits described by US-EPA in urban-industrial areas. Conclusively, some efficient remedial strategies should be focus to overcome the increasing levels of Cr, Cd, Pb and Ni in this study area to protect the health of local inhabitants.     

Human health effects of air pollution

Hazardous chemicals escape to the environment by a number of natural and/or anthropogenic activities and may cause adverse effects on human health and the environment. Increased combustion of fossil fuels in the last century is responsible for the progressive change in the atmospheric composition. Air pollutants, such as carbon monoxide (CO), sulfur dioxide (SO(2)), nitrogen oxides (NOx), volatile organic compounds (VOCs), ozone (O(3)), heavy metals, and respirable particulate matter (PM2.5 and PM10), differ in their chemical composition, reaction properties, emission, time of disintegration and ability to diffuse in long or short distances. Air pollution has both acute and chronic effects on human health, affecting a number of different systems and organs. It ranges from minor upper respiratory irritation to chronic respiratory and heart disease, lung cancer, acute respiratory infections in children and chronic bronchitis in adults, aggravating pre-existing heart and lung disease, or asthmatic attacks. In addition, short- and long-term exposures have also been linked with premature mortality and reduced life expectancy. These effects of air pollutants on human health and their mechanism of action are briefly discussed.     

Simulating Urban-Scale Air Pollutants and Their Predicting Capabilities over the Seoul Metropolitan Area

Abstract

Urban-scale air pollutants for sulfur dioxide, nitrogen dioxide, particulate matter with aerodynamic diameter >10 μm, and ozone (O₃) were simulated over the Seoul metropolitan area, Korea, during the period of July 2-11, 2002, and their predicting capabilities were discussed. The Air Pollution Model (TAPM) and the highly disaggregated anthropogenic and the biogenic gridded emissions (1 km × 1 km) recently prepared by the Korean Ministry of Environment were applied. Wind fields with observational nudging in the prognostic meteorological model TAPM are optionally adopted to comparatively examine the meteorological impact on the prediction capabilities of urban-scale air pollutants. The result shows that the simulated concentrations of secondary air pollutant largely agree with observed levels with an index of agreement (IOA) of >0.6, whereas IOAs of ～0.4 are found for most primary pollutants in the major cities, reflecting the quality of emission data in the urban area. The observationally nudged wind fields with higher IOAs have little effect on the prediction for both primary and secondary air pollutants, implying that the detailed wind field does not consistently improve the urban air pollution model performance if emissions are not well specified. However, the robust highest concentrations are better described toward observations by imposing observational nudging, suggesting the importance of wind fields for the predictions of extreme concentrations such as robust highest concentrations, maximum levels, and >90th percentiles of concentrations for both primary and secondary urban-scale air pollutants.     

Forecasting human exposure to atmospheric pollutants in Portugal – A modelling approach

Air pollution has become one main environmental concern because of its known impact on human health. Aiming to inform the population about the air they are breathing, several air quality modelling systems have been developed and tested allowing the assessment and forecast of air pollution ambient levels in many countries. However, every day, an individual is exposed to different concentrations of atmospheric pollutants as he/she moves from and to different outdoor and indoor places (the so-called microenvironments). Therefore, a more efficient way to prevent the population from the health risks caused by air pollution should be based on exposure rather than air concentrations estimations. The objective of the present study is to develop a methodology to forecast the human exposure of the Portuguese population based on the air quality forecasting system available and validated for Portugal since 2005. Besides that, a long-term evaluation of human exposure estimates aims to be obtained using one-year of this forecasting system application. Additionally, a hypothetical 50% emission reduction scenario has been designed and studied as a contribution to study emission reduction strategies impact on human exposure.To estimate the population exposure the forecasting results of the air quality modelling system MM5-CHIMERE have been combined with the population spatial distribution over Portugal and their time-activity patterns, i.e. the fraction of the day time spent in specific indoor and outdoor places. The population characterization concerning age, work, type of occupation and related time spent was obtained from national census and available enquiries performed by the National Institute of Statistics. A daily exposure estimation module has been developed gathering all these data and considering empirical indoor/outdoor relations from literature to calculate the indoor concentrations in each one of the microenvironments considered, namely home, office/school, and other indoors (leisure activities like shopping areas, gym, theatre/cinema and restaurants). The results show how this developed modelling system can be useful to anticipate air pollution episodes and to estimate their effects on human health on a long-term basis. The two metropolitan areas of Porto and Lisbon are identified as the most critical ones in terms of air pollution effects on human health over Portugal in a long-term as well as in a short-term perspective. The coexistence of high concentration values and high population density is the key factor for these stressed areas. Regarding the 50% emission reduction scenario, the model results are significantly different for both pollutants: there is a small overall reduction in the individual exposure values of PM₁₀ (<10 μg m^?3 h), but for O₃, in contrast, there is an extended area where exposure values increase with emission reduction. This detailed knowledge is a prerequisite for the development of effective policies to reduce the foreseen adverse impact of air pollution on human health and to act on time.     

Atmospheric pollution in an urban environment by tree bark biomonitoring - part II: Sr, Nd and Pb isotopic tracing

The harmful effect of manmade particles on natural processes and human health is documented by a large number of studies showing a positive correlation between particulate matter (PM) concentration and health effects. Diminution of this health risk necessitates among others the precise knowledge of the particle sources, their physical and chemical properties and their dissemination in the environment. Pb isotope ratios have been successfully used during the past decades as tracers of anthropogenic Pb disseminated in the biosphere. Here we show that tree bark biomonitoring with lead (Pb), strontium (Sr) and neodymium (Nd) isotope ratios as tracers allow a thorough analysis of the impacts of industrial and other anthropogenic emissions on the urban environment. This is the first comprehensive multi-isotope tracer study of atmospheric pollution in an urban environment allowing to identify and to integrate the different plume paths of emissions in a digital map system. This innovative approach might become an important tool for environmental management and policy-making processes dealing especially with risks and surveillance of air quality in the urban environment.     

Statistical Modelling of CO and NO2 Concentrations in the Athens Area - Evaluation of Emission Abatement Policies (7 pp)

- DOI: http://dx.doi.org/10.1065/espr2006.04.299 Goal, Scope and Background This paper describes a statistical modelling approach, suggested as a policy tool in the Athens area for the assessment of the emissions reduction level required to meet the air quality standards for two criteria air pollutants, namely CO and NO2. Methods. More than ten years of hourly CO and NOx-NO2 concentration data measured by the monitoring network of the Hellenic Ministry for the Environment, Physical Planning and Public Works were analyzed and the original dataset has been reduced using a data evaluation procedure. Results and Discussion Seasonal pollutant concentration trends suggested that the reduction of CO and NOx concentrations observed in the beginning of the '90s is almost entirely attributed to the increase of the catalyst-equipped cars during this period. The numerical parameters of an empirical model relating EU standard exceedances with mean annual concentrations were defined and the model was validated using datasets from years that were not used for the estimation of these parameters. This model was used in conjunction with a roll-back equation as a policy tool for the assessment of the effect of different CO and NOx emissions reduction scenarios on air quality standard compliance for CO and NO2. Results predicted with this empirical modelling approach were assessed with monitored data averaged over a 3-year period, giving satisfactory results. Conclusion A methodology suggested for assessing the effects of different emissions reduction scenarios on air quality standard attainment was successfully applied for CO and NO2 in the Athens area. Recommendation and Perspective The proposed methodology can provide a useful tool for the evaluation of policies already in progress as well as the development of future policies for emissions reduction in urban areas with similar characteristics, aiming at air quality standard compliance on a timely manner. Such a methodology could be applied in other urban areas of Greece characterized by dense traffic, therefore assisting the development of national policies in relation to air pollutants for which standard exceedances occur.     

An air quality modeling study comparing two possible sites for the new international airport for Mexico City

Using an air quality model, two future urban scenarios induced by the construction of the new international airport for Mexico City are compared at a regional level. The air quality model couples the meteorology model MM5 and state-of-the-art photochemistry. The air quality comparison is made using metrics for the criterion gases selected for the study. From the two urban scenarios compared, the option for Tizayuca is moderately better than the option for Texcoco, because relative reductions in O3 and other photochemical pollutants are achieved over highly populated areas. Regardless of the site, the air quality for the central region of Mexico in the future will deteriorate. In the region of central Mexico, SO2 and NO2 will become important pollutants.     

Development of a speciated, hourly, and gridded air pollutants emission modeling system--a case study on the precursors of photochemical smog in the Seoul metropolitan area, Korea

A speciated, hourly, and gridded air pollutants emission modeling system (SHEMS) was developed and applied in predicting hourly nitrogen dioxide (NO2) and ozone (O3) levels in the Seoul Metropolitan Area (SMA). The primary goal of the SHEMS was to produce a systemized emission inventory for air pollutants including ozone precursors for modeling air quality in urban areas. The SHEMS is principally composed of three parts: (1) a pre-processor to process emission factors, activity levels, and spatial and temporal information using a geographical information system; (2) an emission model for each source type; and (3) a post-processor to produce report and input data for air quality models through database modeling. The source categories in SHEMS are point, area, mobile, natural, and other sources such as fugitive emissions. The emission database produced by SHEMS contains 22 inventoried compounds: sulfur dioxide, NO2, carbon monoxide, and 19 speciated volatile organic compounds. To validate SHEMS, the emission data were tested with the Urban Airshed Model to predict NO2 and O3 concentrations in the SMA during selected episode days in 1994. The results turned out to be reliable in describing temporal variation and spatial distribution of those pollutants.     

Analysis of air quality observations with the aid of the source-receptor relationship approach

In this study, an attempt was made to analyze time series of air quality measurements (O3, SO2, SO4(2-), NOx) conducted at a remote place in the eastern Mediterranean (Finokalia at Crete Island in 1999) to obtain concrete information on potential contributions from emission sources. For the definition of a source-receptor relationship, advanced meteorological and dispersion models appropriate to identify "areas of influence" have been used. The model tools used are the Regional Atmospheric Modeling System and the Lagrangian-type particle dispersion model (forward and backward in time), with capabilities to derive influence functions and definition of "areas of influence." When high levels of pollutants have been measured at the remote location of Finokalia, particles are released from this location (receptor) and traced backward in time. The influence function derived from particle distributions characterizes dispersion conditions in the atmosphere and also provides information on potential contributions from emission sources within the modeling domain to this high concentration. As was shown in the simulation results, the experimental site of Finokalia in Crete is influenced during the selected case studies, primarily by pollutants emitted from the urban conglomerate of Athens. Secondarily, it is influenced by polluted air masses arriving from Italy and/or the Black Sea Region. For some specific cases, air pollutants monitored at Finokalia were possibly related to war activities in the West Balkan Region (Kosovo).     

Urban Air Pollution in Latin America and the Caribbean

Urban air pollution has become an increasing problem in Latin America and the Caribbean. One reason is the rapid expansion in the size of the urban population. This phenomenon is associated with an increase in the number of vehicles and in energy utilization which, in addition to industrial processes often concentrated in the cities, are the primary sources of air pollution in Latin American cities. The air quality standards established in such countries are frequently exceeded although control programs have been implemented. The urban areas more affected by anthropogenic pollutant emissions are Sao Paulo, Brazil; Santiago, Chile; and Mexico City. In Latin America, the population of cities with high priority air pollution problems include approximately 81 million people or 26.5 percent of the total urban population of Latin America, corresponding to 30 million children (< 15 years), 47 million adults (15-59 years) and 4 million elderly people (≧60 years) who are exposed to air pollutant levels that exceed World Health Organization (WHO) guidelines for adequate health protection.     

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO2, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well. Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO2 pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.     

An Air Quality Modeling Study Comparing Two Possible Sites for the New International Airport for Mexico City

Abstract

Using an air quality model, two future urban scenarios induced by the construction of the new international airport for Mexico City are compared at a regional level. The air quality model couples the meteorology model MM5 and state-of-the-art photochemistry. The air quality comparison is made using metrics for the criterion gases selected for the study. From the two urban scenarios compared, the option for Tizayuca is moderately better than the option for Texcoco, because relative reductions in O₃ and other photochemical pollutants are achieved over highly populated areas. Regardless of the site, the air quality for the central region of Mexico in the future will deteriorate. In the region of central Mexico, SO₂ and NO₂ will become important pollutants.     

Simulation of wind-driven dispersion of fire pollutants in a street canyon using FDS

Air quality in urban areas attracts great attention due to increasing pollutant emissions and their negative effects on human health and environment. Numerous studies, such as those by Mouilleau and Champassith (J Loss Prevent Proc 22(3): 316–323, 2009), Xie et al. (J Hydrodyn 21(1): 108–117, 2009), and Yassin (Environ Sci Pollut Res 20(6): 3975–3988, 2013) focus on the air pollutant dispersion with no buoyancy effect or weak buoyancy effect. A few studies, such as those by Hu et al. (J Hazard Mater 166(1): 394–406, 2009; J Hazard Mater 192(3): 940–948, 2011; J Civ Eng Manag (2013)) focus on the fire-induced dispersion of pollutants with heat buoyancy release rate in the range from 0.5 to 20 MW. However, the air pollution source might very often be concentrated and intensive, as a consequence of the hazardous materials fire. Namely, transportation of fuel through urban areas occurs regularly, because it is often impossible to find alternative supply routes. It is accompanied with the risk of fire accident occurrences. Accident prevention strategies require analysis of the worst scenarios in which fire products jeopardize the exposed population and environment. The aim of this article is to analyze the impact of wind flow on air pollution and human vulnerability to fire products in a street canyon. For simulation of the gasoline tanker truck fire as a result of a multivehicle accident, computational fluid dynamics large eddy simulation method has been used. Numerical results show that the fire products flow vertically upward, without touching the walls of the buildings in the absence of wind. However, when the wind velocity reaches the critical value, the products touch the walls of the buildings on both sides of the street canyon. The concentrations of carbon monoxide and soot decrease, whereas carbon dioxide concentration increases with the rise of height above the street canyon ground level. The longitudinal concentration of the pollutants inside the street increases with the rise of the wind velocity at the roof level of the street canyon.     

Ambient air quality and asthma cases in Niğde, Turkey

Urban air quality is one of the key factors affecting human health. Turkey has transformed itself into an urban society over the last 30 years. At the same time, air pollution has become a serious impairment to health in many urban areas in the country. This is due to many reasons. In this study, a nonparametric evaluation was conducted of health effects that are triggered by urban air pollution. Ni?de, the city which is the administrative centre of Nigde province was chosen of the effects of air pollution since, like many central Turkish cities, it is situated on a valley where atmospheric inversion occurs. In this paper, the relationship between ambient urban air quality, namely PM₁₀ and sulphur dioxide (SO₂), and human health, specifically asthma, during the winter season is examined. Air pollution data and asthma cases from 2006 to 2010 are covered in this study. The results of our study indicate that total asthma cases reported in Nigde between 2008 and 2010 were highly dependent on ambient SO₂ concentration. More asthma cases were recorded when 30 μg?m^?3 or higher SO₂ was present in the ambient air than those recorded under cleaner ambient air conditions. Moreover, it was determined that in Nigde in 2010, asthma cases reported in males aged between 45 and 64 were closely correlated with ambient SO₂ (α?=?0.05).