Rapid reductive destruction of hazardous organic compounds by nanoscale Fe0

Fe0-mediated reductive destruction of hazardous organic compounds such as chlorinated organic compounds (COCs) and nitroaromatic compounds (NACs) in the aqueous phase is one of the latest innovative technologies. In this paper, rapid reductive degradation of COCs and NACs by synthesized nanoscale Fe0 in anaerobic batch systems was presented. The nanoscale Fe0, characterized by high specific surface area and high reactivity, rapidly transformed trichloroethylene (TCE), chloroform (CF), nitrobenzene (NB), nitrotoluene (NT), dinitrobenzene (DNB) and dinitrotoluene (DNT) under ambient conditions, which results in complete disappearance of the parent compounds from the aqueous phase within a few minutes. GC analysis reported that the main products of the dechlorination of TCE and CF were ethane and methane as well as that most of the nitro groups in NACs were reductively transformed to amine groups. These results suggest that the rapid reductive destruction by nanoscale Fe0 is potentially a viable in situ or aboveground treatment of groundwater contaminated with hazardous organic compounds including COCs and NACs.     

Effect of metal ions and humic acid on the dechlorination of tetrachloroethylene by zerovalent iron

The dechlorination of tetrachloroethylene (PCE) by zerovalent iron (Fe(0)) in the presence of metal ions and humic acid was investigated. In the absence of metal ion and humic acid, 64% of the initial PCE was dechlorinated after 125 h with the production of ethane and ethene as the major end products. The dechlorination followed pseudo-first-order kinetics and the normalized surface rate constant (k(SA)) for PCE dechlorination was (3.43+/-0.61)x10(-3)lm(-2)h(-1). Addition of metal ions enhanced the dechlorination efficiency and rate of PCE, and the enhancement effect followed the order Ni(II)>Cu(II)>Co(II). The k(SA) for PCE dechlorination in the presence of metal ions were 2-84 times higher than that in the absence of metal ions. X-ray photoelectron spectroscopy (XPS) showed that Cu(II) and Ni(II) were reduced by Fe(0) to zerovalent metals, and resulted in the formation of bimetallic system to accelerate the dechlorination reaction. On the contrary, humic acid out-competed the reactive sites on iron surface with PCE, and subsequently decreased the dechlorination efficiency and rate of PCE by Fe(0). However, the reactivity of Fe(0) for PCE dechlorination in the presence of metal ions and humic acid increased by a factor of 3-161 when compared to the iron system containing humic acid alone. Since humic acid and metal ions are the most often found co-existing compounds in the contaminated aquifers with chlorinated hydrocarbons, results obtained in this study is useful to better understand the feasibility of using Fe(0) for long-term application to the remediation of contaminated sites.     

Degradation of picric acid and 2,6-DNT in marine sediments and waters: the role of microbial activity and ultra-violet exposure

Bio- and photo-transformation of two munitions and explosives of concern, 2,6-dinitrotoluene (2,6-DNT) and 2,4,6-trinitrophenol (picric acid) were assessed in spiked marine sediments and water. A sandy and a fine-grained sediment, with 0.25% and 1.1% total organic carbon, respectively, were used for biotransformation assessments at 10 and 20 degrees C. Sterilized sediments were used as controls for biotic vs. abiotic transformation. Transformation products were analyzed by HPLC, GC/MS and LC/MS. Biotransformation in sediments started soon after the initial contact of the chemicals with the sediments and proceeded for several months, with rates in the following sequence: fine-grain at 20 degrees C > fine-grain at 10 degrees C > sand at 20 degrees C > sand at 10 degrees C. The biotransformation paths seemed to be similar for all conditions. The major biotransformation product of 2,6-DNT was 2-amino-6-nitrotoluene (2-A-6-NT). 2-Nitrotoluene (2-NT) and other minor components, including N,N-dimethyl-3-nitroaniline, benzene nitrile, methylamino-2-nitrosophenol and diaminophenol, were also identified. After more prolonged incubation these chemicals were replaced by high molecular weight polymers. Several breakdown products of picric acid were identified by GC/MS, including 2,4-dinitrophenol, amino dinitrophenols, 3,4-diamino phenol, amino nitrophenol and nitro diaminophenol. Photo-transformation of 2,6-DNT and picric acid in seawater was assessed under simulated solar radiation (SSR). No significant photolysis of picric acid in seawater was observed for up to 47 days, but photo-transformation of 2,6-DNT began soon after the initial exposure to SSR, with 89% being photo-transformed in 24 h and none remaining after 72 h. High molecular weight chemicals were generated, with mass spectra ranging from molecular weight 200-500 compared to 182 for DNT, and the color of the stock solution changed from clear to orange. Complexity of the mass spectra and mass differences among fragments suggest that multiple polymers were produced and were co-eluting during the LC/MS analyses.     

Reactions of the amine-containing drugs fluoxetine and metoprolol during chlorination and dechlorination processes used in wastewater treatment

The reactivities of the amine-containing pharmaceuticals fluoxetine and metoprolol with hypochlorite were studied using conditions that simulate wastewater disinfection including neutral pH (7.0), a range of reaction times (2–60 min), and a molar excess of hypochlorite relative to the pharmaceutical concentration (5.7 times). The reactions were monitored using liquid chromatography (LC) with several detection modes including ultraviolet absorbance (UV), mass spectrometry (MS), and post-column reaction/reductive electrochemistry (EC) for determining active chlorine products. At levels of 10 μM, both compounds reacted rapidly (<2 min) to form principally N-chloramine products that were stable in aqueous solution for at least 1 h. The reaction was also studied in wastewater, and similar reactivity was noted. These results demonstrate that the cations fluoxetine and metoprolol are likely to be rapidly transformed into neutral N-chloramines during wastewater disinfection. The reactivity of the N-chloramines was also studied with sulfite to simulate dechlorination, which is often employed in wastewater treatment. Both N-chloramines reacted slowly with sulfite. In the pure water dechlorination experiments, it was estimated that 70% and 10% of the peak areas remained after 2 min reaction time for fluoxetine and metoprolol, respectively. At longer reaction times both N-chloramines had been completely reduced by sulfite, and the product of the sulfite reduction reaction was the parent pharmaceutical amine. Since typical dechlorination times in wastewater treatment are on the order of seconds, this suggests the chloramines formed from these two basic drugs might evade dechlorination and be released into the environment. The implications of chloramine release are discussed.     

Aerobic and anaerobic degradation of profluralin and trifluralin

Abstract

The degradation of profluralin [N‐(cyclopropylmethyl)‐α,α,α‐trifluoro‐2,6‐dinitro‐N‐propyl‐]p‐toluidine] and trifluralin (α,α,α‐trifluoro‐2,6‐dinitro‐N,N‐dipropyl‐p‐toluidine) was studied under aerobic and anaerobic soil conditions. Three soils (Goldsboro loamy sand, Cecil loamy sand, Drummer clay loam) were each treated with 1 ppmw herbicide; anaerobic conditions were maintained by flooding. Soil samples were extracted monthly and subjected to TLC analysis. No degradation was detected in sterile controls. Aerobic degradation of both herbicides was greatest in the Cecil loamy sand soil over the entire incubation period. Degradation of profluralin in Cecil soil under aerobic conditions was 86 percent after 4 months with three products detected; 83 percent of the trifluralin was degraded with two products detected. Anaerobic degradation accounted for 72 percent of the profluralin and 78 percent of the trifluralin after 4 months. Degradation of both herbicides increased with incubation time for the first 3 months and decreased slightly thereafter. Generally there was more extensive degradation (percent and in number of products formed) of profluralin than trifluralin under the conditions tested. More degradation products were detected for both herbicides under aerobic conditions than under anaerobic conditions.     

Comparative toxic and genotoxic effects of chloroacetanilides,formamidines and their degradation products on Vibrio fischeri and Chironomus riparius

Toxic and genotoxic effects of alachlor, metolachlor, amitraz, chlordimeform, their respective environmentally stable degradation products 2,6-diethylaniline, 2-ethyl-4-methylaniline, 2,4-dimethylaniline, and two other related compounds, 3,4-dichloroaniline and aniline were compared. Acute toxicity tests with Chironomus riparius (96 h) and Vibrio fischeri (Microtox) and genotoxicity tests with a dark mutant of V. fischeri (Mutato) were carried out. Our results demonstrate that toxicity and genotoxicity of the pesticides are retained upon degradation to their alkyl-aniline metabolites. In the case of the herbicides alachlor and metolachlor, the toxicity to V. fischeri was enhanced upon degradation. Narcosis alone explains toxicity of the compounds to the midge, but not so for the bacteria suggesting a disparity in the selectivity of the test systems. All compounds showed direct genotoxicity in the Vibrio test. but amitraz and its metabolite were genotoxic at concentrations 10(3)-10(5) lower than all the other compounds. The observations indicate that stable aniline degradation products of the pesticides may contribute considerably to environmental risks of pesticides application and that genotoxic effects may arise upon degradation of pesticides.     

Rapid treatment of water contamined with atrazine and parathion with zero-valent iron.

The utility of fine-grained iron metal in the remediation of water contamined with Atrazine and Parathion was investigated. Batch procedures under water treatment conditions (ambient temperature and pH of approximately 7) indicated that these pesticides degrade rapidly in the presence of iron powder (40-60 mesh, 40 g/l). The decline in the concentration of pesticide was monitored by HPLC. Experiments with unbuffered solutions showed a steady increase in pH values during the reactions. Therefore, experiments were run in buffered solutions. Different buffered solutions resulted in different degradation rates indicating that the buffer plays an important role in enhancing the degradation process. Tests were also performed on an industrial effluent solution containing a variety of pesticides. Although the products of degradation were not characterized, our HPLC results indicated the disappearance of all the parent pollutants.     

Degradation of benomyl, picloram, and dicamba in a conical apparatus by zero-valent iron powder

Reduction of some pesticides (benomyl, picloram, and dicamba) was studied in an aerobic batch conical pilot system to investigate the disappearance of these pesticides on contact with iron powder (20 g/l, 325-mesh). Aqueous buffered solutions of the compounds were added to the system followed by zero-valent iron powder (ZVIP), and the decline in the pesticide concentrations was monitored over time. HPLC analyses show a complete disappearance of picloram (1.20 mg/l) after 20 min of reaction. Benomyl (1.00 mg/l) and dicamba (1.25 mg/l) disappear after 25 and 40 min, respectively. The t₅₀ values ranged from 3 to 5.5 min, and were about slightly less than the t_1/2 values reported when the log of the relative HPLC peak area was plotted versus time, where the relative peak area was calculated by dividing the measured peak area by the initial peak area. Pathways for the degradation of the studied pesticides by ZVIP are proposed.     

Degradation and mineralization of sulcotrione and mesotrione in aqueous medium by the electro-Fenton process: a kinetic study

Introduction

The degradation and mineralization of two triketone (TRK) herbicides, including sulcotrione and mesotrione, by the electro-Fenton process (electro-Fenton using Pt anode (EF-Pt), electro-Fenton with BDD anode (EF-BDD) and anodic oxidation with BDD anode) were investigated in acidic aqueous medium.

Methods

The reactivity of both herbicides toward hydroxyl radicals was found to depend on the electron-withdrawing effect of the aromatic chlorine or nitro substituents. The degradation of sulcotrione and mesotrione obeyed apparent first-order reaction kinetics, and their absolute rate constants with hydroxyl radicals at pH?3.0 were determined by the competitive kinetics method.

Results and discussion

The hydroxylation absolute rate constant (k _abs) values of both TRK herbicides ranged from 8.20?×?10⁸ (sulcotrione) to 1.01?×?10⁹ (mesotrione) L?mol^?1?s^?1, whereas those of the TRK main cyclic or aromatic by-products, namely cyclohexane 1,3-dione , (2-chloro-4-methylsulphonyl) benzoic acid and 4-(methylsulphonyl)-2-nitrobenzoic acid, comprised between 5.90?×?10⁸ and 3.29?×?10⁹?L?mol^?1?s^?1. The efficiency of mineralization of aqueous solutions of both TRK herbicides was evaluated in terms of total organic carbon removal. Mineralization yields of about 97?C98% were reached in optimal conditions for a 6-h electro-Fenton treatment time.

Conclusions

The mineralization process steps involved the oxidative opening of the aromatic or cyclic TRK by-products, leading to the formation of short-chain carboxylic acids, and, then, of carbon dioxide and inorganic ions.     

Biotransformation of phenylurea herbicides by a soil bacterial strain, Arthrobacter sp. N2: structure, ecotoxicity and fate of diuron metabolite with soil fungi

In order to assess the influence of the aromatic substitution on the ability of a soil bacterial strain, Arthrobacter sp. N2, to degrade phenylurea herbicides, biotransformation assays were performed in mineral medium with resting cells of this soil bacterial strain on three phenylurea herbicides (diuron, chlorotoluron and isoproturon). Each herbicide considered, led to the formation of only one metabolite detected by HPLC analysis. After isolation, the metabolites were identified by NMR and MS, as the corresponding substituted anilines. According to the Microtox test (realized on the bacterium Vibrio fischeri), these metabolites presented non-target toxicity far more important (up to 600 times higher for 4-isopropylaniline) than the parent molecule. For isoproturon and chlorotoluron, the amount of substituted anilines obtained at the end of the biotransformation was very low, whereas the biotransformation of diuron into 3,4-dichloroaniline was almost quantitative. In this last case, the degradation product accumulated in the medium. In soil, other microorganisms are present that might degrade it. So the biotransformation of 3,4-dichloroaniline was then tested with four fungal strains: Aspergillus niger, Beauveria bassiana, Cunninghamella echinulata var. elegans and Mortierella isabellina. The aniline was further transformed with all the microorganisms tested. Only one metabolite was detected by HPLC analysis and after isolation, it was identified to be 3,4-dichloroacetanilide. This acetylated compound led to biological effects less important on V. fischeri than 3,4-dichloroaniline. These results stress the importance of identifying the degradation products to assess the impact of a polluting agent. Indeed, the pollutant may undergo transformation yielding compounds more toxic than the parent molecule.     

Time trends of perfluorinated compounds from the sediment core of Tokyo Bay, Japan (1950s-2004)

Perfluorinated compounds (PFCs) were detected in sediment core samples collected in Tokyo Bay to reveal their time trends. The core sample deposited during 1950s-2004 was divided into two- to three-year intervals and the concentrations of 24 types of PFCs were determined. Perfluorooctane sulfonate (PFOS) decreased gradually from the early 1990s and its precursor decreased rapidly in the late 1990s, whereas perfluorooctanoic acid (PFOA) increased rapidly. The observed trends were regarded as a reflection of the shift from perfluorooctyl sulfonyl fluoride (PFOSF)-based products to telomer-based products after the phaseout of PFOSF-based products in 2001. The branched isomers of perfluoroundecanoic acid (PFUnDA) and perfluorotridecanoic acid (PFTrDA) were detected in the sample with its ratio of linear-isomer/branched-isomer concentrations decreasing. In this study, we revealed that the sediment core can serve as a tool for reconstructing the past pollution trend of PFCs and can provide interesting evidence concerning their environmental dynamics and time trend.     

Reactions of the amine-containing drugs fluoxetine and metoprolol during chlorination and dechlorination processes used in wastewater treatment

The reactivities of the amine-containing pharmaceuticals fluoxetine and metoprolol with hypochlorite were studied using conditions that simulate wastewater disinfection including neutral pH (7.0), a range of reaction times (2–60 min), and a molar excess of hypochlorite relative to the pharmaceutical concentration (5.7 times). The reactions were monitored using liquid chromatography (LC) with several detection modes including ultraviolet absorbance (UV), mass spectrometry (MS), and post-column reaction/reductive electrochemistry (EC) for determining active chlorine products. At levels of 10 μM, both compounds reacted rapidly (<2 min) to form principally N-chloramine products that were stable in aqueous solution for at least 1 h. The reaction was also studied in wastewater, and similar reactivity was noted. These results demonstrate that the cations fluoxetine and metoprolol are likely to be rapidly transformed into neutral N-chloramines during wastewater disinfection. The reactivity of the N-chloramines was also studied with sulfite to simulate dechlorination, which is often employed in wastewater treatment. Both N-chloramines reacted slowly with sulfite. In the pure water dechlorination experiments, it was estimated that 70% and 10% of the peak areas remained after 2 min reaction time for fluoxetine and metoprolol, respectively. At longer reaction times both N-chloramines had been completely reduced by sulfite, and the product of the sulfite reduction reaction was the parent pharmaceutical amine. Since typical dechlorination times in wastewater treatment are on the order of seconds, this suggests the chloramines formed from these two basic drugs might evade dechlorination and be released into the environment. The implications of chloramine release are discussed.     

Ecotoxicity characterization of dinitrotoluenes and some of their reduced metabolites

In the present study, the toxic effects of 2,4-dinitrotoluene (2,4-DNT), 2,6-dinitrotoluene (2,6-DNT) and a selection of their respective metabolites were examined and compared to 2,4,6-trinitrotoluene (TNT) using the 15-min Microtox (Vibrio fischen) and 96-h freshwater green alga (Selenastrum capricomutum) growth inhibition tests. All of the compounds tested were less toxic than TNT. Using the Microtox assay, 2,6-DNT was more toxic than 2,4-DNT and the order of toxicity for 2,6-DNT and its metabolites was: 2,6-DNT > or = 2A-6NT > 2,6-DAT; whereas that for 2,4-DNT was: 4A-2NT > 2A-4NT > 2,4-DNT > 2,4-DAT. For the algal test, 2,4-DNT was more toxic than 2,6-DNT and the order of toxicity for 2,4-DNT and its metabolites was: 2,4-DNT > 2,4-DAT approximately equal to 4A-2NT = 2A-4NT. The order of toxicity for 2,6-DNT and its reduced metabolites using the algal test was very similar to the Microtox bioassay. These results demonstrate that the reduced metabolites of 2,6-DNT tested in this study were less toxic than that of the parent compound, but certain partially reduced metabolites of 2,4-DNT can be more toxic than the parent molecule. These data put into question the general hypothesis that reductive metabolism of nitro-aromatics is associated with a sequential detoxification process.     

A study of silicon carbide synthesis from waste serpentine

There are 60000 tons of serpentine wastes produced in year 2004 in Taiwan. This is due to the well-developed joints in the serpentine ore body as well as the stringent requirements of the particle size and chemical composition of serpentine by iron making company. The waste also creates considerable environmental problems. The purpose of this study is reutilization of waste serpentine to produce a high value silica powder after acid leaching. These siliceous microstructure products obtained from serpentine would be responsible for high reactivity and characteristic molecular sieving effect. In this study, the amorphous silica powder was then synthesized to silicon carbide with the C/SiO(2) molar ratio of 3. The experiment results show that silicon carbide can be synthesized in 1550 degrees C. The formed silicon carbide was whisker beta type SiC which can be used as raw materials for industry.     

The fate of chloroacetanilide herbicides and their degradation products in the Nzoia Basin, Kenya

Alachlor, metolachlor and their respective environmentally stable aniline degradation products, 2,6-diethylaniline and 2-ethyl-6-methylaniline were analyzed in water and sediment samples from 9 sites along River Nzoia, Kenya using gas chromatography. The degradation products were detected in > 90% of the sediment and water samples, while the parent compounds occurred in < 14% of the water samples. Much higher concentrations of the pesticides and their degradation products occurred in the sediment than in the water (1.4 up to 10 800-fold), indicating an accumulation of the compounds in the sediment. The constant occurrence of the degradation products in the sediment during the study period infers a persistence of these compounds. It is hypothesized that the prevailing tropical climatic conditions favor a quick breakdown of the pesticides to their environmentally stable degradation products, thereby making the latter more important pollutants than their parent products in the study area.     

Microbial degradation of mefenoxam in rhizosphere of Zinnia angustifolia

The fate of the fungicide mefenoxam was studied in a containerized rhizosphere system. The rhizosphere system used Zinnia angustifolia (Tropic Snow) in a bark/sand potting mix and was compared to bulk potting mix (no plants). Rhizosphere microbial populations were allowed to establish for 3 weeks prior to fungicide addition (20 microg per g mix). Mefenoxam and degradation product concentrations were determined by High HPLC or capillary electrophoresis after extraction. Seventy eight percent of the fungicide originally applied to the rhizosphere was degraded after 21 days compared to 44% in bulk system (no plant). The primary degradation product was the free acid N-(2,6-dimethylphenyl)-N-(methoxyacetyl)-DL-alanine, which accounted for 71% of the applied parent chemical after 30 days. N-(2,6-dimethylphenyl)-acetamide was also detected, but in lesser amounts. Bacterial populations in the rhizosphere increased during the 30-day period, which correlated with an increase in degradation of the parent compound. Pure cultures of Pseudomonas fluorescens and Chrysobacterium indologenes isolated from the rhizosphere system could degrade the applied fungicide (10 microg/ml) almost completely to the free acid within 54 h.     

Multivariate analysis of photo-Fenton degradation of the herbicides tebuthiuron, diuron and 2,4-D

The degradation of herbicides in aqueous solution by photo-Fenton process using ferrioxalate complex (FeOx) as source of Fe2+ was evaluated under blacklight irradiation. The commercial products of the herbicides tebuthiuron, diuron and 2,4-D were used. The multivariate analysis, more precisely, the response surface methodology was applied to evaluate the role of FeOx and hydrogen peroxide concentrations as variables in the degradation process, and in particular, to define the concentration ranges that result in the most efficient degradation of the herbicides. The degradation process was evaluated by the determination of the remaining total organic carbon content (TOC), by monitoring the decrease of the concentrations of the original compounds using HPLC and by the chloride ion release in the case of diuron and 2,4-D. Under optimized conditions, 20 min were sufficient to mineralize 93% of TOC from 2,4-D and 90% of diuron, including oxalate. Complete dechlorination of these compounds was achieved after 10 min reaction. It was found that the most recalcitrant herbicide is tebuthiuron, while diuron shows the highest degradability. However, under optimized conditions the initial concentration of tebuthiuron was reduced to less than 15%, while diuron and 2,4-D were reduced to around 2% after only 1 min reaction. Furthermore, it was observed that the ferrioxalate complex plays a more important role than H2O2 in the photodegradation of these herbicides in the ranges of concentrations investigated.     

Pathway of anthracene modification under simulated solar radiation

Exposure of polycyclic aromatic hydrocarbons (PAHs) to sunlight results in rapid structural photomodification generally via oxidation reactions. These PAH modification products are in many cases more toxic than their parent compounds. In this study, anthracene (ANT), a rapidly photooxidized PAH, was irradiated with simulated solar radiation (SSR, 100 μmol m⁻² s⁻¹) in aqueous solution to examine the photomodification pathway. The photoproducts formed were identified by HPLC. The ANT product profile after 9 h in SSR was very complex, with more than 20 compounds detected. The photoproducts formed were anthraquinones, benzoic acids, benzaldehydes and phenols showing the process to be oxidative in nature. Some of the anthraquinones were themselves subject to photooxidation, and were thus intermediates in the product pathway. The kinetics of ANT photooxidation revealed a pseudo first-order reaction with a half-life of 2 h under the SSR source used. The kinetics of product formation allowed deduction of a probable photomodification pathway. This study indicates that PAH photooxidation products are likely to exist as complex, dynamically changing mixtures in PAH contaminated aquatic environments.     

Reductive degradation of carbaryl in water by zero-valent iron

Reduction of carbaryl solution by zero-valent iron powder (ZVIP) was studied in a rotator batch system (70 rpm) in order to evaluate the utility of this reaction in remediation of carbamate contaminated water. Degradation with different amount of ZVIP: 0.01, 0.02, 0.03, 0.04 g/ml at pH 6.6 and at ambient temperature was investigated. The results show that the process exhibits a degradation rate appearing to be directly proportional to the surface contact area of ZVIP (325-mesh) with the carbaryl molecules. Three analytical techniques were used to monitor carbaryl degradation: (1) A UV-Vis diode array spectrophotometer was used to record all spectra. (2) A high performance liquid chromatography was used to separate by-products and examine the evolution of breakdown products. (3) A home-built spectrophosphorimeter that uses the solid surface room temperature phosphorescence (SSRTP) was employed to observe selectively the decline of the carbaryl concentration at different amount of ZVIP on Whatman no. 1 filter paper. Results show that the reducing degradation of carbaryl with ZVIP as the source of electrons is effective with a half-life close to several minutes.     

白腐真菌降解经微电解预处理二硝基重氮酚废水的研究

利用自行培养、驯化的白腐真菌,对经过微电解预处理的二硝基重氮酚(DDNP)废水进行了生物降解试验.结果表明,经过微电解预处理后的DDNP废水(含CODCr467 mg/L)经生化处理108 h后,出水中CODCr在131 mg/L左右,达到国家二级排放标准;其中的苯胺类、硝基类的去除率达到99.9%以上,达到国家一级排放标准.对试验所获得的时间序列进行动力学研究结果证明,白腐真菌降解经微电解预处理后的DDNP废水的反应为准一级动力学反应.