Degradation of phenols in olive oil mill wastewater by biological,enzymatic, and photo-Fenton oxidation

Background, aim, and scope  

Olive oil mill wastewater (OOMW) environmental impacts minimization have been attempted by developing more effective processes, but no chemical or biological treatments were found to be totally effective to mitigate their impact on receiving systems. This work is the first that reports simultaneously the efficiency of three different approaches: biological treatment by two fungal species (Trametes versicolor or Pleurotus sajor caju), enzymatic treatment by laccase, and chemical treatment by photo-Fenton oxidation on phenols removal.     

Evaluation of olive oil mill wastewater toxicity on spinach

Background, aim, and scope

Olive oil mill wastewater (OMW), a by-product of the olive oil extraction process, is annually produced in huge amounts in olive-growing areas and represents a significant environmental problem in Mediterranean areas. We studied the impact of OMW dilutions (1:20 and 1:10) on spinach plants in order to evaluate OMW dilutions as a low-cost alternative method for the disposal of this waste.

Materials and methods

The effects of OMW dilutions were evaluated on seed germination, shoot and root elongation, biomass production, nutrient uptake and translocation, ascorbic acid content, polyphenols, photosynthetic pigments, and photosynthetic performance of spinach.

Results

Plant biomass was more affected than plant height and total chlorophyll; carotenoid and ascorbic acid content progressively decreased with decreasing OMW dilution. Exposure to both OMW dilutions resulted in overaccumulation of total polyphenols, which were negatively correlated to plant biomass and nutrients. Nutrient (Fe, Ca, and Mg) content was insufficient leading to reduced growth. Water use efficiency decreased mainly due to decreased CO₂ assimilation rate rather than to a decline of transpiration rate. Disturbances in photosystem II (PSII) photochemical efficiency could be better envisaged by the ratio between variable fluorescence and initial fluorescence (Fv/Fo), which showed much greater amplitude than the maximal photochemical efficiency of PSII photochemistry (Fv/Fm).

Conclusions

From the data obtained, it is suggested that 1:20 OMW dilutions are still phytotoxic and that higher OMW dilutions should be used in order to use this waste for the irrigation of spinach plants.     

Sequential treatment of olive oil mill wastewater with adsorption and biological and photo-Fenton oxidation

Olive oil mill wastewater (OMWW), a recalcitrant pollutant, has features including high phenolic content and dark color; thereby, several chemical or physical treatments or biological processes were not able to remediate it. In this study, the treatment efficiencies of three treatments, including adsorption, biological application, and photo-Fenton oxidation were sequentially evaluated for OMWW. Adsorption, biological treatment, and photo-Fenton caused decreasing phenolic contents of 48.69 %, 59.40 %, and 95 %, respectively. However, after three sequential treatments were performed, higher reduction percentages in phenolic (total 99 %) and organic contents (90 %) were observed. Although the studied fungus has not induced significant color reduction, photo-Fenton oxidation was considered to be an attractive solution, especially for color reduction. Besides, toxicity of OMWW treatment was significantly reduced.     

Valorization of treated olive mill wastewater in fertigation practice

Olive mill wastewater (OMW) brings about a major environmental problem in Tunisia as well as in the other Mediterranean countries. Its strong organic load and its toxicity due to the presence of complex phenolic compounds have dire effects when applied to soil. To overcome this difficulty, the OMW pretreatment was investigated in the present work using the Fenton oxidation reaction with zero-valent iron. Then, this pretreated wastewater was valorized in fertigation practice. The effects of the addition of different concentrations of both treated and raw OMW on soil and cropping system were investigated. The treatment by Fenton oxidation with zero-valent iron could reduce 50 % of COD and decrease 53 % of phenolic compounds. OMW application had a temporary effect on the soil pH and EC. The results showed that the evolution of soil pH and EC was related to the organic matter of the soil which depends on the spread concentrations of raw or treated OMW. After 15-day incubation period, the soil pH and EC tended to stabilize and return to the control level. Moreover, this stabilization is faster in treated OMW than that in raw OMW especially for concentrations as high as 3 and 4 %. Plants cultivated with treated OMW showed an increase in their germination. The results pointed an improvement in the stem length of plants which is almost similar to that of the control for both pea and tomato, especially for high concentrations of 3 and 4 %.     

紫外光助O3、H2O2氧化降解炼油废碱水的可行性实验

炼油高浓度有机废碱水是石化行业中很难降解的废水.本实验用光化学氧化技术对其进行了降解研究,比较了紫外光/空气、紫外光/O3、紫外光/空气/H2O2系统的处理效果.结果表明,光化学氧化技术降解此废水是可行的,紫外光可使废水中COD、油、酚的降解率明显提高.当废水中O3的投加量每小时为22 mg/L,或H2O2投加量为1%/L时,UV/O3法与UV/空气/H2O2法的降解效果相近.同时,通过控制O3浓度或H2O2的投加量等条件,可使废水中COD、油、酚和硫化物降解到地方污染物二级排放标准.     

A practical approach to the degradation of polychlorinated biphenyls in transformer oil

A practical and efficient disposal method for hydrodechlorination of polychlorinated biphenyls (PCBs) in transformer oil is reported. Transformer oil containing PCBs was treated by nanometric sodium hydride (nano-NaH) and transition metal catalysts. High destruction and removal efficiency (89.8%) can be attained by nano-NaH alone under mild conditions. The process exhibits apparent characteristics of a first order reaction. The reductive ability of nano-NaH was enhanced by the addition of transition metal catalysts. In the presence of TiCl4, 99.9% PCBs was hydrodechlorinated. The complex reducing reagents, Ni(OAc)2+i-PrONa, show extra hydrodechlorinating activity for di-chlorinated biphenyls.     

A kinetic study of anaerobic digestion of olive mill wastewater at mesophilic and thermophilic temperatures

The kinetics of the anaerobic digestion of olive mill wastewater (OMW) was studied in the mesophilic and thermophilic ranges of temperature. Two completely mixed continuous flow bioreactors operating at 35 degrees C and 55 degrees C and with an average biomass concentration of 5.45 g VSS litre(-1) were used. The thermophilic reactor worked satisfactorily between hydraulic retention times (HRT) of 10 to 40 days, removing between 94.6 and 84.4% of the initial chemical oxygen demand (COD). In contrast, the mesophilic reactor showed a marked decrease in substrate utilization and methane production at a HRT of 10 days. TVFA levels and the TVFA/alkalinity ratio were higher and close to the suggested limits for digester failure. The yield coefficient for methane production (1 CH(4) STP g(-1) COD(added)) was 28% higher in the thermophilic process than in the mesophilic one. Macroenergetic parameters, calculated using Guiot's kinetic model, gave yield coefficients for the biomass (Y) of 0.18 (mesophilic) and 0.06 g VSS g(-1) COD (thermophilic) and specific rates of substrate uptake for cell maintenance (m) of 0.12 (mesophilic) and 0.27 g COD g(-1) VSS.day(-1) (thermophilic). The experimental results showed the rate of substrate uptake (R(s); g COD g(-1) VSS.day(-1)), correlated with the concentration of biodegradable substrate (S(b); g COD litre(-1)), through an equation of the Michaelis-Menten type for the two temperatures used.     

Membrane filtration of olive mill wastewater and exploitation of its fractions.

Olive mill wastewater (OMW) produced from small units scattered in rural areas of Southern Europe is a major source of pollution of surface and subsurface water. In the present work, a treatment scheme based on physical separation methods is presented. The investigation was carried out using a pilot-plant unit equipped with ultrafiltration, nanofiltration, and reverse osmosis membranes. Approximately 80% of the total volume of wastewater treated by the membrane units was sufficiently cleaned to meet the standards for irrigation water. The concentrated fractions collected in the treatment concentrates were characterized by high organic load and high content of phenolic compounds. The concentrates were tested in hydroponic systems to examine their toxicity towards undesired herbs. The calculations of the cost of the overall process showed that fixed and operational costs could be recovered from the exploitation of OMW byproducts as water for irrigation and/or as bioherbicides.     

采油污水中聚丙烯酰胺的化学降解特性研究

通过模拟实验测定采油污水中聚丙烯酰胺(PAM)的相对分子质量的变化,判断其降解程度。实验研究了光催化氧化、含盐量、氧化剂等化学因素对聚丙烯酰胺降解的影响,从而得到聚丙烯酰胺在采油污水中的一些化学降解特性,为采油污水中聚丙烯酰胺的脱除提供判断和依据。     

Decolourization and removal of some organic compounds from olive mill wastewater by advanced oxidation processes and lime treatment

Background Olive mill wastewater (OMW) generated by the olive oil extracting industry is a major pollutant, because of its high organic load and phytotoxic and antibacterial phenolic compounds which resist biological degradation. Mediterranean countries are mostly affected by this serious environmental problem since they are responsible for 95% of the worldwide oliveoil production. There are many methods used for OMW treatment, such as adsorption, electro coagulation, electro-oxidation, biological degradation, advanced oxidation processes (AOPs), chemical coagulation, flocculation, filtration, lagoons of evaporation and burning systems, etc. Currently, there is no such economical and easy solution. The aim of this study was to evaluate the feasibility of decolourization and removal of phenol, lignin, TOC and TIC in OMW by UV/H₂O₂ (AOPs). The operating parameters, such as hydrogen peroxide dosage, times, pH, effect of UV and natural sunlight were determined to find the suitable operating conditions for the best removal. Moreover, there is no study reported in the literature related to the use of UV/H₂O₂ and lime together in OMW treatment. Methods OMW was obtained from an olive-oil producing plant (Muğla area of Turkey) which uses a modern production process. No chemical additives are used during olive oil production. This study was realised by using two different UV sources, while taking the time and energy consumption into consideration. These two sources were mercury lamps and natural sunlight. Before starting AOPs experiments, one litre of OMW was treated by adding lime until a pH of 7.00. Then, 100 ml was taken from each sample, and 1 to 10 ml of a 30% H₂O₂ (Riedel-deHaen) solution was added. These solutions in closed vessels were laid in the natural sunlight for a week and their compositions and colour changes were analysed daily by UV-Vis spectrophotometer. At the end of the one-week period, they were treated with lime. In this study, the effect of changes in the initial pH, times and H₂O₂ concentrations on removal was investigated. At the end of all experiments, changes in colour, phenol, lignin, TOC and TIC concentrations were analysed according to standard methods. Results and Discussion In the samples exposed to natural sunlight and having an H₂O₂/OMW ratio of 3 ml/100 ml, a significant colour removal was achieved approximately 90% of the time at the end of 7 days. When the same samples were treated with lime (pH: up to 7), 99% efficiency was achieved. When phenol and lignin removals were examined in the same concentration, phenol and lignin removal were found 99.5%, 35%, respectively. However, for maximum lignin removal, more use of H₂O₂ (10 ml H₂O₂/100 ml OMW) was found to be necessary. Under these conditions, it was found that lignin can be removed by 70%, but to 90% with lime, at the end of a seven-day period. Rate constants obtained in the experiments performed with direct UV were found to be much higher than those of the samples exposed to natural sunlight (k^a _lignin = 0.3883 ≫ k^b _lignin = 0.0078; k^a _phenol = 0.5187 ≫ k^b _phenol = 0.0146). Moreover, it should be remembered in this process that energy consumption may induce extra financial burden for organisations. Conclusions It was found, in general, that colour, lignin, total organic carbon and phenol were removed more efficiently from OMW by using H₂O₂ UV and lime OMW. Moreover, in the study, lime was found to contribute, both initially and after radical reactions, to the efficiency to a great extent. Recommendations and Perspectives Another result obtained from the study is that pre-purification carried out with hydrogen peroxide and lime may constitute an important step for further purification processes such as adsorption, membrane processes, etc.     

Biodegradation and detoxification of olive mill wastewater by selected strains of the mushroom genera Ganoderma and Pleurotus

Thirty-nine white-rot fungi belonging to nine species of Agaricomycotina (Basidiomycota) were initially screened for their ability to decrease olive-mill wastewater (OMW) phenolics. Four strains of Ganoderma australe, Ganoderma carnosum, Pleurotus eryngii and Pleurotus ostreatus, were selected and further examined for key-aspects of the OMW biodegradation process. Fungal growth in OMW-containing batch cultures resulted in significant decolorization (by 40-46% and 60-65% for Ganoderma and Pleurotus spp. respectively) and reduction of phenolics (by 64-67% and 74-81% for Ganoderma and Pleurotus spp. respectively). COD decrease was less pronounced (12-29%). Cress-seeds germination increased by 30-40% when OMW was treated by Pleurotus strains. Toxicity expressed as inhibition of Aliivibrio fischeri luminescence was reduced in fungal-treated OMW samples by approximately 5-15 times compared to the control. As regards the pertinent enzyme activities, laccase and Mn-independent peroxidase were detected for Ganoderma spp. during the entire incubation period. In contrast, Pleurotus spp. did not exhibit any enzyme activities at early growth stages; instead, high laccase (five times greater than those of Ganoderma spp.) and Mn peroxidases activities were determined at the end of treatment. OMW decolorization by Ganoderma strains was strongly correlated to the reduction of phenolics, whereas P. eryngii laccase activity was correlated with the effluent’s decolorization.     

Land spreading of olive mill wastewater: effects on soil microbial activity and potential phytotoxicity

Extremely high organic load and the toxic nature of olive mill wastewater (OMW) prevent their direct discharge into domestic wastewater treatment systems. In addition to the various treatment schemes designed for such wastewater, controlled land spreading of untreated OMW has been suggested as an alternative mean of disposal. A field study was conducted between October 2004 and September 2005 to assess possible effects of OMW on soil microbial activity and potential phytotoxicity. The experiment was carried out in an organic orchard located on a Vertisol-type soil (Jezre'el Valley, Israel) and included two application levels of OMW (36 and 72m(3)ha(-1)). Total microbial counts, and to less extent the hydrolytic activity and soil respiration were increased following the high OMW application level. A bench-scale lab experiment showed that the rate of OMW mineralization was mainly dependent on the general status of soil activity and was not related to previous acclimatization of the soil microflora to OMW. Soil phytotoxicity (% germination and root elongation) was assessed in soil extracts of samples collected before and after each OMW application, using germinating cress (Lepidium sativum L.) seeds. We found direct short-term effect of OMW application on soil phytotoxicity. However, the soil was partly or completely recovered between successive applications. No further phytotoxicity was observed in treated soils as compared with control soil, 3 months after OMW application. Such short-term phytotoxicity was not in correlation with measured EC and total polyphenols in the soil extracts. Overall, the results of this study further support a safe controlled OMW spreading on lands that are not associated with sensitive aquifers.     

Complexation parameters of heavy metals by olive mill wastewater determined by a cation exchange resin

Abstract

Complexing parameters in aqueous systems containing heavy metals and wastewater from olive‐oil mill (WOM) have been estimated using a cation exchange resin method. The parameters estimated were the maximum complexing ability (MCA), the stability constant (Kc) and a parameter indicating the stoichiometrical characteristics of the complex (a).

MCA of WOM for Cu, Zn, Pb and Mn was 0.470, 0.314, 0.068 and 0.300 mmol (g WOM)^‐1 respectively, and was related with the ionic radii of the various metal ions. The log Kc values followed the sequence: Cu>Pb>Zn>Mn in agreement with their respective electronegativities. In the case of Cu and Pb, data obtained here was compared with that determined in other work.     

Short-term impact of olive mill wastewater (OMWW) applications on the physico-chemical and microbiological soil properties of an olive grove in Argentina

The purpose of this work was to investigate the effects of spreading olive oil mill wastewater (OMWW) on soil biochemical parameters and olive production in an organically managed olive orchard. The experiment was carried out with three different doses of OMWW (80, 160 and 500 m³ ha^?1) and a control (untreated soil). Three samplings were done at 10, 30 and 90 days after the administration of the byproduct. OMWW application differentially modified the biochemical properties of the soil analyzed. Organic matter, organic carbon, total nitrogen and extractable phosphorus soil contents increased proportionally with each increasing dose. The values of these parameters decreased gradually with time. Total microbial activity was altered and the OMWW 500 m³ ha^?1 treatment proved to be the most active when compared with the other applied doses. OMWW agricultural application also modified the structure of soil microbial communities, particularly affecting Gram positive and negative bacteria, while fungal biomass did not show consistent changes. Although there was a salinity increase in the treated soil, especially at the highest dose, the productive parameters analyzed (fruit and oil tree^?1) were not affected. In light of the obtained results, we consider that low dose of OMWW could be considered an alternative farming practice for semiarid regions.     

Dose and frequency dependent effects of olive mill wastewater treatment on the chemical and microbial properties of soil

Olive mill wastewater (OMW) is a problematic by-product of olive oil production. While its high organic load and polyphenol concentrations are associated with troublesome environmental effects, its rich mineral and organic matter contents represent valuable nutrients. This study aimed to investigate the valorization of this waste biomass as a potential soil conditioner and fertilizer in agriculture. OMW was assayed at three doses 50, 100, and 200 m³ ha⁻¹ year⁻¹) over three successive years in olive fields. The effects of the effluent on the physico-chemical and microbial properties of soil-layers were assessed. The findings revealed that the pH of the soil decreased but electrical conductivity and organic matter, total nitrogen, sodium, and potassium soil contents increased in proportion with OMW concentration and frequency of application. While no variations were observed in phosphorus content, slow increases were recorded in calcium and magnesium soil contents. Compared to their control soil counterparts, aerobic bacteria and fungi increased in proportion with OMW spreading rates. The models expressing the correlation between progress parameters and OMW doses were fitted into a second degree polynomial model. Principal component analysis showed a strong correlation between soil mineral elements and microorganisms. These parameters were not related to phosphorus and pH.     

Monitoring the photochemical degradation of triclosan in wastewater by UV light and sunlight using solid-phase microextraction

Photo solid-phase microextraction (photo-SPME) is applied for the first time to study the photochemical behavior of an emerging pollutant, triclosan, in real contaminated wastewater samples using a solar simulator. In this study, water samples are extracted by SPME and then, the fiber coating is irradiated for a selected time. This on-fiber procedure, so-called photo-SPME, followed by gas chromatography-mass spectrometry makes it possible to study photodegradation kinetics and the generation of byproducts. Several photoproducts were identified in the real samples including the 2,8-dichlorodibenzo-p-dioxin, dichlorophenols and a compound tentatively identified as other DCDD congener or a dichlorohydroxydibenzofuran. Accordingly, it was possible to postulate main photodegradation mechanisms. Photo-SPME demonstrated slower kinetics in wastewater than in spiked ultrapure water probably due to the presence of dissolved organic matter. This technique was extensively compared with conventional aqueous photodegradation showing high similarity. The influence of pH on the triclosan photolysis and on the triclosan-dioxin conversion was also investigated in wastewater. Photodegradation of triclosan and formation of 2,8-DCDD occurred independently of sample pH. This study represents an advance in the use of photo-SPME to understand the photochemical fate of environmental organic pollutants and demonstrates its clear advantages with real samples.     

Lignin modifying enzymes of Coriolopsis polyzona and their role in olive oil mill wastewaters decolourisation

In order to decolourise olive oil mill wastewaters (OOMW) efficiently, production and differential induction of ligninolytic enzymes by the white rot Coriolopsis polyzona, were studied by varying growth media composition and/or inducer addition. Among various possible inducers, veratryl alcohol appeared to be the most efficient to enhance specific productions of lignin peroxidase (LiP), manganese peroxidase (MnP) and laccase by a factor of 18.5, 20.8 and 55, respectively. Ligninolytic enzymes were better produced in glucose based medium with a low nitrogen level (2.2 mM) under O2 atmosphere. The addition of 5 mM veratryl alcohol resulted in a maximal production of LiP, whereas maximal MnP and laccase were obtained at 10 mM. LiP production was totally repressed in presence of 100 microM Mn2+. The extrapolation of these conditions on OOMW based media was carried out at different effluent dilutions and the possible role of the different ligninolytic enzymes in OOMW decolourisation was studied. A better effluent decolourisation was obtained under LiP induction condition (5 mM veratryl alcohol) than when LiP was repressed (100 microM Mn2+). Furthermore, high levels of laccase had a detrimental effect on OOMW decolourisation concomitant to the formation of soluble polymeric aromatic compounds.     

A/O/O生物流化床处理焦化废水中酚类组成及降解特性分析

为了研究实际焦化废水处理工程中酚类污染物的组成及降解特性,实验中采用HLB小柱固相萃取水样,GC-MS选择性离子扫描方法检测环境中15种酚类污染物,除苯酚的平均回收率为72.6%以外,其他14种酚类的回收率在87.6%~102.3%之间,平行测定标准偏差均小于7.62%,能够满足环境中酚类污染物测定的需要。实验结果表明,焦化废水中含有高浓度的苯酚、甲基酚和萘酚,同时存在微量的氯酚和硝基酚。在生物流化床A/O/O组合工艺处理焦化废水的过程中,厌氧阶段高浓度酚类(苯酚、甲基酚和萘酚)、氯酚类去除率分别为29.3%和31.6%;一级好氧阶段分别为99%和92.4%;二级好氧阶段分别达到89%和6%;最终出水中酚类污染物浓度0.045 mg/L,满足钢铁行业废水达标排放要求。     

钢铁厂冷轧废水污泥中铬回收实验研究

钢铁厂冷轧废水污泥中含有10%以上的铬、20%以上的铁和1.5%以上的锌(均以质量分数计).为了从污泥中回收铬,首先研究了污泥中铬的形态,确定为Cr(Ⅲ);然后以碳酸钠为氧化助剂,将污泥与碳酸钠按一定比例混合后焙烧,再用水浸取.研究了碳酸钠的添加量、焙烧温度和时间、浸取时间和浸取方式对铬回收率的影响.研究表明,每克干污泥中添加0.6 g或以上碳酸钠,在固定床上700 ℃焙烧4 h以上,可实现60%以上的总铬浸出率,残渣为Fe2O3基脱硫剂原料.     

Characterization of carbons from olive cake by sorption of wastewater pollutants

Studies has been conducted to compare the sorption properties between raw carbons made from olive cake and commercial activated carbons to remove aquatic pollutant such as heavy metal (HM), phenol (Ph), dodecylbenzenesulfonic acid-sodium salt detergent (DBSNa) and methylene blue dye (MB). Effect of acidic treatments by H2SO4, HCl and HNO3 on the sorption properties of olive cake carbon (OCC) were studied by mass titration, SEM photographs, sorption isotherms. It is found that acidic treatment changes the surface properties of OCC but do not enhance its sorption capacity. Compared to commercial activated carbons the OCC derivatives generally are equally able to uptake HM and Ph from solution but MB and DBSNa are not. This different behaviour is to attribute to manufacturing and activation treatments so as surface groups of the precursor sorbent material. For the heavy metals, chromium and silver were removed effectively but to small extent cadmium. This may be because of the various charge densities of metal elements tested. The results of the multiple experiments indicate that sorption of cadmium ions can be significantly improved by the presence of complexing agents sorbed from the carbon. An empirical mathematical form is proposed to correlate experimental data and to compare the performance of the different sorbent materials.