Clay, Phosphate Adsorption, Dispersion, and Rheology

Soluble phosphate is a common ingredient of fertilizer used in agriculture production all over the world. This chemical mixed with soil is transported into the water and marine environment via rainfall causing a range of environmental problems such as toxic algae bloom. Kaolin clay is a common material found in soil and is used as a model system to understand the effects of phosphate adsorption on the flocculation/dispersion of the clay slurries. In the topics, torrential downpours are common. The large water flow will easily disperse the unflocculated or weakly flocculated sediments over a wide area including river and marine environments. Phosphate adsorption was found to weaken the interparticle forces between clay platelets in the slurries. At high enough concentration, it will completely deflocculate the clay slurries, i.e. the net interparticle force is repulsive. A deflocculated slurry is characterised by a low viscosity and no yield stress. As a result, it is much easier to disperse this slurry over a wide area possible even in a small downpour. This study will present the flow and yield stress behaviour of kaolin clay slurries under the influence of adsorbed phosphate.     

Superfund site remediation by landfilling—overview of landfill design,operation, closure,and postclosure issues

This article discusses the appropriateness of using landfills as part of remediating hazardous chemical and Superfund sites, with particular emphasis on providing for true long‐term public health and environmental protection from the wastes and contaminated soils that are placed in the landfills. On‐site landfilling or capping of existing wastes is typically the least expensive approach for gaining some remediation of existing hazardous chemical/Superfund sites. The issues of the deficiencies in US EPA and state landfilling approaches discussed herein are also applicable to the landfilling of municipal and industrial solid “nonhazardous” wastes. These deficiencies were presented in part as “Problems with Landfills for Superfund Site Remediation” at the US EPA National Superfund Technical Assistance Grant Workshop held in Albuquerque, New Mexico, in February 2003. They are based on the author's experience in investigating the properties of landfill liners and the characteristics of today's landfills, relative to their ability to prevent groundwater pollution and to cause other environmental impacts. Discussed are issues related to both solid and hazardous waste landfills and approaches for improving the ability of landfills to contain wastes and monitor for leachate escape from the landfill for as long as the wastes in the landfill will be a threat. © 2004 Wiley Periodicals, Inc.     

Estimation of nitrogen flow change in Beijing,China, for the years 1995, 2000, and 2004

Rapid economic growth in China has led to environmental pollution. Recycling nutrients is essential for sustainable agriculture, and it is necessary to estimate the amount of available organic resources in order to achieve this. Using nitrogen as a tracer, we estimated the organic resource flows in 1995, 2000, and 2004 in Beijing. The agricultural nitrogen flow was calculated from the fertilizer, agricultural product, and byproduct flows. The livestock nitrogen flow was calculated from the feed, excretion, and stock flows. The human nitrogen flow was calculated from the food intake, excretion, and food waste flows. The amounts of recyclable organic resources were estimated from these nitrogen flows. The Daxing, Fangshan, Miyun, Shunyi, and Tongzho areas had high nitrogen loads in 2004, as did the outer suburbs, but Beijing proper had an extremely low nitrogen flow and the inner suburbs had low nitrogen flows. The estimated amount of compost that could be produced from domestic organic waste across Beijing was equivalent to 88,100 t of nitrogen. The Beijing area contains 394,100 ha of farmland, so, if the compost was applied at an equivalent of 100 kg of nitrogen per hectare, the equivalent of 48,000 t of nitrogen would be surplus.     

Remediation,land use,and risk at Hanford

U.S. Department of Energy (US DOE) remediation responsibilities include the Hanford site in Washington State. Cleanup is governed by the Tri‐Party Agreement (TPA) between the US DOE as the responsible party and the U.S. Environmental Protection Agency and Washington State Department of Ecology as joint regulators. In 2003, the US DOE desired to implement a “Risk‐Based End State” (RBES) policy at Hanford, with remediation measures driven by acceptable risk standards using exposure scenarios based on the 1999 Hanford Comprehensive Land‐Use Plan. Facing resistance from regulators and stakeholders, the US DOE solicited public input on its policy. This led to a Hanford Site End State Vision in 2005 and a commitment that the TPA would continue to control remediation. This article describes how regulator and public participation modified RBES to an end‐state vision. © 2010 Wiley Periodicals, Inc.     

Stabilization of As, Cr, Cu, Pb and Zn in soil using amendments--a review

The spread of contaminants in soil can be hindered by the soil stabilization technique. Contaminant immobilizing amendments decrease trace element leaching and their bioavailability by inducing various sorption processes: adsorption to mineral surfaces, formation of stable complexes with organic ligands, surface precipitation and ion exchange. Precipitation as salts and co-precipitation can also contribute to reducing contaminant mobility. The technique can be used in in situ and ex situ applications to reclaim and re-vegetate industrially devastated areas and mine-spoils, improve soil quality and reduce contaminant mobility by stabilizing agents and a beneficial use of industrial by-products. This study is an overview of data published during the last five years on the immobilization of one metalloid, As, and four heavy metals, Cr, Cu, Pb and Zn, in soils. The most extensively studied amendments for As immobilization are Fe containing materials. The immobilization of As occurs through adsorption on Fe oxides by replacing the surface hydroxyl groups with the As ions, as well as by the formation of amorphous Fe(III) arsenates and/or insoluble secondary oxidation minerals. Cr stabilization mainly deals with Cr reduction from its toxic and mobile hexavalent form Cr(VI) to stable in natural environments Cr(III). The reduction is accelerated in soil by the presence of organic matter and divalent iron. Clays, carbonates, phosphates and Fe oxides were the common amendments tested for Cu immobilization. The suggested mechanisms of Cu retention were precipitation of Cu carbonates and oxy-hydroxides, ion exchange and formation of ternary cation-anion complexes on the surface of Fe and Al oxy-hydroxides. Most of the studies on Pb stabilization were performed using various phosphorus-containing amendments, which reduce the Pb mobility by ionic exchange and precipitation of pyromorphite-type minerals. Zn can be successfully immobilized in soil by phosphorus amendments and clays.     

Tensile Strength, Elongation, Hardness, and Tensile and Flexural Moduli of Injection-Molded TPS Filled with Glycerol-Plasticized DDGS

Continuing growth of biofuel industries is generating large amounts of coproducts such as distillers dried grains with solubles (DDGS) from ethanol production and glycerol from biodiesel. Currently these coproducts are undervalued, but they have application in the plastics industry as property modifiers. This research effort has quantified the effects on mechanical properties of adding DDGS and glycerol to a commercial thermoplastic starch (TPS). The methodology was to physically mix DDGS, as filler, with the TPS pellets and injection mold the blends into test bars using glycerol as a processing aid. The bars were then mechanically tested with blends from 0 to 65 %, by weight, of plasticized filler. The test bars were typically relatively brittle with little yielding prior to fracture with elongation between 1 and 3 %. The addition of glycerol enabled molding of blends with high levels of DDGS but did not increase strength. Any presence of filler decreased the tensile strength of the starch, and up to 30 % filler, the tensile strength drops about 15 %. The 20 and 50 % blends (without glycerol) have slightly greater stiffness than pure starch. With some other blends, the presence of plasticized filler degrades the tensile modulus with 35 % filler yielding about 1/3 the stiffness. Changes in the flexural modulus are much more pronounced as 20–25 % filled TPS has a 30 % increase in flexural stiffness. In terms of surface hardness, blends up to 60 % filler are within 20 % of the TPS baseline.     

Tensile Strength, Elongation, Hardness, and Tensile and Flexural Moduli of PLA Filled with Glycerol-Plasticized DDGS

Rapid growth of the biofuel industry is generating large amounts of coproducts such as distillers dried grains with solubles (DDGS) from ethanol production and glycerol from biodiesel. Currently these coproducts are undervalued, but they have application in the plastics industry as property modifiers. The objective of this research effort is to quantify the effects on mechanical properties of adding DDGS and glycerol to polylactic acid (PLA). The methodology was to physically mix DDGS, as filler, with PLA pellets and injection mold the blends into test bars using glycerol as a plasticizer. The bars were subject to mechanical testing procedures to obtain tensile strength, tensile and flexural moduli, elongation to break, and surface hardness of blends from 0 to 90?%, by weight, of plasticized filler. Blends were typically relatively brittle with little or no yielding prior to fracture, and the addition of glycerol enabled molding of blends with high levels of DDGS but did not increase strength. Any presence of filler decreased the tensile strength of the PLA, and 20?C30?% filler reduced strength by 60?%. The 35?C50?% filled PLA had about one-fifth the value for pure PLA; at 60?C65?% filler level, about 10?% tensile strength remained; and over 80?% filler, 95?% of the strength was lost. Over 20?% filler, the tensile modulus decreased. The 35?% plasticized, filled blend yielded about one-half the stiffness as the pure PLA case; flexural modulus trended in the same manner but demonstrated a greater loss of stiffness. Most blends had less than 3?% elongation to break while surface hardness measurements indicated that up to 60?% filler reduced Shore D hardness by less than 20?%. The tensile strength and modulus data are consistent with the findings of other researchers and indicate that the type of filler and amount and sequence of plasticization are secondary effects, and the total PLA displaced is the dominant factor in determining the mechanical strength of the PLA and DDGS blends. Up to 65?% plasticized DDGS filler can be injection molded, and sufficient mechanical strength exists to create a variety of products. Such a novel material provides higher-value utilization of the biofuel coproducts of glycerol and DDGS and maintains the biodegradable and biocompatible nature of PLA.     

Perchlorate: Sources,uses, and occurrences in the environment

Perchlorate contamination of groundwater and soil continues to be a hot topic in many sectors, including industry, the federal Departments of Defense and Energy, regulators, and the general public. This article presents information on what is currently known regarding perchlorate uses, known and suspected naturally occurring versus anthropogenic perchlorate sources, and past and present manufacturing locations. It provides the reader with a baseline as well as background information to facilitate an understanding of perchlorate in the environment for the ultimate purpose of remediation. The article is based on research conducted by the Interstate Technology Regulatory Council for a forthcoming, more substantial perchlorate overview document scheduled for publication later in 2005. The document will include an overview of the chemical and discussions of remediation techniques and methods of analysis. © 2005 Wiley Periodicals, Inc.     

Cement/clay interactions-- a review: experiments, natural analogues, and modeling

The concept of storing radioactive waste in geological formations calls for large quantities of concrete that will be in contact with the clay material of the engineered barriers as well as with the geological formation. France, Switzerland and Belgium are studying the option of clayey geological formations. The clay and cement media have very contrasted chemistries that will interact and lead to a degradation of both types of material. The purpose of this review is to establish an exhaustive list of laboratory experiments so as to identify the reaction sequences in the evolution of both the clay minerals and accessory minerals during their alteration in an alkaline environment. We review the data on clay dissolution kinetics in this environment, and include an invaluable study of natural analogues that allow one to correlate the phenomena in time. The available data and experiments make it possible to construct predictive numerical models. However, as the quality of the data is inhomogeneous, we recommend a continuation of the thermodynamic and kinetic data acquisition. It is obvious that the numerical modeling of the alkaline disturbance will be more relevant if it can combine the advantages of the different detailed models: mineralogical completeness, combined modeling of the clay and cement media, evolution of the porosity, consideration of the pCO2 and all the surface reactions.     

Behaviour of Cd,Cr, Mn,Ni, Pb,and Zn in sewage sludge incineration by fluidised bed furnace

Cd, Cr, Mn, Ni, Pb, and Zn behaviour during sewage sludge incineration was investigated in seven pilot tests using a circulating fluidised bed furnace. Dewatered sludge at a solids concentration of 15-18% was fed to the furnace either alone (two tests) or spiked with chlorinated organic compounds (five tests). The behaviour of metals in the fluidised bed furnace was studied by comparing metal concentrations in the two main ash streams: ash separated from the cyclone immediately following the fluidised bed furnace, and fly ash recovered in the final bag filter. A metal enrichment factor was defined as the ratio of metal concentration between filter ash and cyclone ash. Only Cd and Pb showed any significant enrichment. Their enrichment factors were mainly affected by chlorine concentration in the feed sludge. To check whether simple equilibrium models may explain and predict metal behaviour, experimental data were compared with percentage of the metal vaporisation in the combustion chamber predicted using a thermodynamic model. Discrepancies between model predictions and experimental results are accounted for by considering that kinetics may be a limiting factor in the formation of metal chloride gaseous species. Due to the very short sludge residence time in the fluidised bed furnace, the gaseous compounds have little chance to evolve completely.     

Treatment technologies for mercury in soil,waste, and water

Mercury occurs naturally in the environment and can be found in elemental (metallic), inorganic, and organic forms. Modern uses for mercury include chemical manufacturing, thermometers, and lighting (mercury vapor and fluorescent lamps). The chemical and allied products industry group is responsible for the largest quantity of mercury used in the United States. Mercury, particularly the organic methylmercury form, is a potent neurotoxin capable of impairing neurological development in fetuses and young children and of damaging the central nervous system of adults. Mercury regulations span multiple federal and state environmental statutes, as well as multiple agency jurisdictions. In August 2007, the U.S. Environmental Protection Agency's (US EPA's) Office of Superfund Remediation and Technology Innovation (OSRTI) published a report titled “Treatment Technologies for Mercury in Soil, Waste, and Water.“ The report identifies eight treatment technologies and 57 projects, 50 of which provide performance data. This information can help managers at sites with mercury‐contaminated media and generators of mercury‐contaminated waste and wastewater to identify proven and effective mercury treatment technologies; screen technologies based on application‐specific goals, characteristics, and costs; and apply experiences from sites with similar treatment challenges. This article provides a synopsis of the US EPA report, which is available at http://clu‐in.org/542R07003 . © 2007 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

     

Report: biomedical waste management practices at Balrampur Hospital, Lucknow, India.

Biomedical waste has become a serious health hazard in many countries, including India. Careless and indiscriminate disposal of this waste by healthcare establishments and research institutions can contribute to the spread of serious diseases such as hepatitis and AIDS (HIV) among those who handle it and also among the general public. The present study pertains to the biomedical waste management practices at Balrampur Hospital, a premier healthcare establishment in Lucknow, in North India. The study shows that infectious and non-infectious wastes are dumped together within the hospital premises, resulting in a mixing of the two, which are then disposed of with municipal waste at the dumping sites in the city. All types of wastes are collected in common bins placed outside the patients wards. For disposal of this waste the hospital depends on the generosity of the Lucknow Municipal Corporation, whose employees generally collect it every 2 or 3 days. The hospital does not have any treatment facility for infectious waste. The laboratory waste materials, which are disposed of directly into the municipal sewer without proper disinfection of pathogens, ultimately reach the Gomti River. All disposable plastic items are segregated by the rag pickers from the hospital as well as municipal bins and dumps. The waste is deposited either inside the hospital grounds, or outside in the community bin for further transportation and disposal along with municipal solid waste. The open dumping of the waste makes it freely accessible to rag pickers who become exposed to serious health hazards due to injuries from sharps, needles and other types of material used when giving injections. The results of the study demonstrate the need for strict enforcement of legal provisions and a better environmental management system for the disposal of biomedical waste in the Balrampur Hospital, as well as other healthcare establishments in Lucknow.     

Trends in Fish Community Structure,Biomass, and Production in Three Algoma,Ontario, Lakes

Long-term (i.e. >10 years) whole community fish dataincluding catch-per-unit-effort, abundance, biomass, andproduction from three lakes were used: 1) to examine variabilityin fish population and community measures among years using wholelake assessments of fish populations derived from mark recaptureexperiments, 2) to assess implications arising from monitoringindividual species vs. the whole fish community, and 3) toascertain whether, in fisheries assessments (science) a commonlyused surrogate measure, [catch-per-unit-effort (CPUE)] reflectedannual changes in the fish assemblage, and thus may be a goodestimator of abundance. High, long-term variability was evident in the abundance andbiomass of a fish species in our lakes, yet the communityremained relatively stable in terms of its biomass andproduction. Changes in total fish community biomass appear drivenby large species, which, relative to small fish species, remainstable among years. Among years, species richness remainedstable; however, fish species changed in the community. AnnualCPUE was found to be a suitable surrogate for abundance (N) ofsmall fishes; CPUE x mean weight of the catch (bCPUE) was asuitable surrogate for biomass (B) of large fishes. Prior toconcluding that a change in a fish population has occurred as aresult of a stressor, care must be taken to critically examinethe level of population assessment in order to avoid acceptingpotentially invalid conclusions.     

Developing a holistic strategy for integrated waste management within municipal planning: Challenges,policies, solutions and perspectives for Hellenic municipalities in the zero-waste,low-cost direction

The present position paper addresses contemporary waste management options, weaknesses and opportunities faced by Hellenic local authorities. It focuses on state-of-the-art, tested as well as innovative, environmental management tools on a municipal scale and identifies a range of different collaboration schemes between local authorities and related service providers. Currently, a policy implementation gap is still experienced among Hellenic local authorities; it appears that administration at the local level is inadequate to manage and implement many of the general policies proposed; identify, collect, monitor and assess relevant data; and safeguard efficient and effective implementation of MSWM practices in the framework of integrated environmental management as well. This shortfall is partly due to the decentralisation of waste management issues to local authorities without a parallel substantial budgetary and capacity support, thus resulting in local activity remaining often disoriented and isolated from national strategies, therefore yielding significant planning and implementation problems and delays against pressing issues at hand as well as loss or poor use of available funds. This paper develops a systemic approach for MSWM at both the household and the non-household level, summarizes state-of-the-art available tools and compiles a set of guidelines for developing waste management master plans at the municipal level. It aims to provide a framework in the MSWM field for municipalities in Greece as well as other countries facing similar problems under often comparable socioeconomic settings.     

煤矸石中铅、铬、镉的溶出性能

以滕南煤田某煤矿风化煤矸石为研究对象,应用主成分分析法分析了煤矸石粒径对Pb,Cr,Cd溶出浓度的影响,应用回归分析法分析了浸溶时间与Pb,Cr,Cd溶出浓度的关系特征。实验结果表明：模拟湿地浸溶条件下,煤矸石中Pb,Cd,Cr溶出浓度均超出或接近Ⅲ类水体水质标准,对水环境存在污染风险;煤矸石粒径对Pb,Cd,Cr溶出浓度存在影响,粒径越小则Pb、Cr、Cd溶出浓度越大,粒径小于8.0 cm的煤矸石浸溶贡献较大。建立了表征Pb,Cr,Cd溶出浓度与浸溶时间对数（以10为底）关系的一元三次多项式回归方程,经检验均具有显著性。     

A review of corn masa processing residues: generation, properties, and potential utilization

The production of corn masa-based products in the US has been increasing over the last several years, and as a result, so has the quantity of waste materials being generated from this industry. Although currently landfilled, these byproduct streams may have potential for value-added processing and utilization, which are options that simultaneously hold the promise of increased economic benefit for masa processors as well as decreased potential pollution for the environment. Fundamental to any byproduct development effort is knowledge of the characteristics of the residue stream, because physical and chemical properties are vital for the proper design of subsequent processing operations and applications. Data for masa byproduct materials are currently not readily available, however. Thus, the objective of this study was to fully investigate, review, and summarize the existing literature in order to develop a comprehensive knowledge base for these residue streams. The most substantial findings from this study were that masa residues currently are not being utilized as coproducts, but instead are being landfilled; they have a high fiber content, and thus much untapped potential exists for its extraction and value-added utilization vis-à-vis human and industrial applications, including phytosterol and ethanol production. It was also determined that masa byproducts, due to the high fiber content, may also be suitable for use as livestock feed additives, especially for ruminant animals that can digest these materials. Furthermore, due to substantial calcium content, masa byproducts could also potentially be used as a calcium resource. Under current processing practices, though, these residues have very high moisture contents. Before they can be effectively and economically utilized, they must be dehydrated in order to reduce transportation costs, decrease microbial activity, and increase shelf life.     

Solidification/stabilization for remediation of wood preserving sites: Treatment for dioxins,PCP, creosote,and metals

This article discusses the use of solidification/stabilization (S/S) to treat soils contaminated with organic and inorganic chemicals at wood preserving sites. Solidification is defined for this article as making a material into a freestanding solid. Stabilization is defined as making the contaminants of concern nonmobile as determined from a leaching test. S/S then combines both properties. For more information on S/S in general the reader should refer to other publications (Connors, J.R. [1990]). Chemical fixation and solidification of hazardous wastes. New York: Van Nostrand Reinhold; US Environmental Protection Agency. [1993a]. Engineering bulletin solidification/stabilization of organics and inorganics (EPA/540/S‐92/015); Wiles, C.C. [1989]. Solidification and stabilization technology. In H.M. Freeman [Ed.], Standard handbook of hazardous waste treatment and disposal. New York: McGraw Hill) as this article addresses only wood preserving sites and assumes basic knowledge of S/S processes. For a more general discussion of wood preserving sites and some other remedial options, the reader may wish to refer to a previous EPA publication (US Environmental Protection Agency. [1992a]. Contaminants and remedial options at wood preserving sites [EPA/600/R‐92/182]). This article includes data from the successful remediation of a site with mixed organic/inorganic contaminants, remediation of a site with organic contaminants, and detailed treatability study results from four sites for which successful formulations were developed. Included are pre‐ and post‐treatment soil characterization data, site vaines. ileizdot‐ names (in some cases), treatment formulas used (generic aridproprietary), costs, recommendations, and citatioiis to inore detailed refer‐ en ces. The data presen ted iiidica te that dioxins, pentachlorophepi 01 (PCP), creosote, polycyclic aromatic hydrocarbom (PAHsI, and metals can be treated at moderate cost by the use of S/S techuologp.     

Remediation,land use,and risk at Rocky Flats,and a comparison with Hanford

US Department of Energy (US DOE) responsibilities for its former national atomic weapons complex include remediation of the Rocky Flats facility near Denver, Colorado. In 1993, the site's primary mission shifted from “production'' of plutonium components for atomic weapons to cleanup of extensive radioactive and chemical contamination representing the legacy of production activities. Remediation was governed by the agreements between the US DOE as the responsible party and the US Environmental Protection Agency and the state of Colorado as joint regulators. In 1995, the Rocky Flats Future Use Working Group issued its final report, recommending among other features that long‐term cleanup reduce contamination levels to background. This article describes the circumstances that led the US DOE to complete the Rocky Flats cleanup more quickly and makes comparisons to the situation at the US DOE's Hanford site. © 2011 Wiley Periodicals, Inc.     

Outdoor Weathering Evaluation of Carbon-Black-Filled, Biodegradable Copolyester as Substitute for Traditionally Used, Carbon-Black-Filled, Nonbiodegradable, High-Density Polyethylene Mulch Films

Carbon-black-filled, biodegradable, copolyester mulch film (Eastar®, or EA, Tennessee Eastman, Kingsport, TN) and commercial carbon-black-filled, high-density polyethylene (HDPE) mulch film were exposed for 12 weeks to commercial vegetable crop growing conditions by being placed directly on irrigated soil in the field of the University of Tennessee Alcoa Highway State Agriculture Experiment Station (Knoxville, TN) and by being placed on a plywood exposure rack as described by the American Society of Testing and Materials (ASTM) Standard Test Method 1435: Outdoor Weathering of Plastics. Mechanical properties and weather information were collected in order to evaluate the feasibility of using the newly developed biodegradable EA mulch film to replace the nonbiodegradable HDPE mulch film. Results indicate that the EA mulch film exhibited favorable tensile strength and elongation-at-break during outdoor exposure rack testing and outdoor, in-field, placed directly on the soil, exposure testing, suggesting biodegradable EA could be a substitute for the HDPE nonbiodegradable material.     

Steam gasification of tyre waste, poplar, and refuse-derived fuel: a comparative analysis

In the field of waste management, thermal disposal is a treatment option able to recover resources from "end of life" products. Pyrolysis and gasification are emerging thermal treatments that work under less drastic conditions in comparison with classic direct combustion, providing for reduced gaseous emissions of heavy metals. Moreover, they allow better recovery efficiency since the process by-products can be used as fuels (gas, oils), for both conventional (classic engines and heaters) and high efficiency apparatus (gas turbines and fuel cells), or alternatively as chemical sources or as raw materials for other processes. This paper presents a comparative study of a steam gasification process applied to three different waste types (refuse-derived fuel, poplar wood and scrap tyres), with the aim of comparing the corresponding yields and product compositions and exploring the most valuable uses of the by-products.