资源循环科学与工程专业课程体系优化与教学内容创新实践的探索

针对资源循环科学与工程本科专业课程教学,以西安建筑科技大学该专业课程体系为案例,通过对毕业生和专业研讨会调研,分析了课程体系建设的现状和存在的问题。借鉴其他高校资源专业的课程体系和教学内容,通过梳理各门专业课程的教学内容和相互联系,构建了资源专业课程体系课程群,探索了课程体系优化的方法和增加创新实践环节的具体措施。     

Combustible and incombustible speciation of Cl and S in various components of municipal solid waste

Chlorine (Cl) and sulfur (S) in municipal solid waste (MSW) are important reactive elements during combustion. They generate the acidic pollutants HCl and SOx, and, furthermore, produce and suppress organic chlorinated compounds. Nevertheless, few practical reports about Cl and S content in MSW have been published. In combustion and recycling processes, both combustible Cl and S, and incombustible Cl and S species are equally important. This paper presents the results of a comprehensive study about combustible and incombustible Cl and S in MSW components, including kitchen garbage, paper, textiles, wood and leaves, plastics and small chips. By integrating this collected data with data about MSW composition, not only the overall content of Cl and S in MSW, but also the origins of both combustible and incombustible Cl and S were estimated. The average Cl content in bulk MSW was 3.7 g/kg of raw MSW, of which 2.7 and 1.0 g/kg were combustible and incombustible, respectively. The Cl contribution from plastics was 76% and 27% with respect to combustible and incombustible states. The average S content in bulk MSW was 0.81 g/kg of raw MSW, of which 0.46 g/kg was combustible and 0.35 g/kg was incombustible. Combustible S was mainly due to synthetic textiles, while incombustible S was primarily from paper.     

重庆市危险废物市场分析及预测

随着危险废物政策的不断完善,以及重庆市对环境监管力度的不断加大,危险废物收集体系日益健全,危险废物产生、收集、集中处置量将继续增长.现有利用处置设施能力不足,规划的利用处置设施能力与处置缺口出现结构不平衡问题.针对这些问题,对重庆市危险废物的产量及处置现状、现有及规划的危废利用处置设施进行了统计整理分析,并对未来产量进...     

Physical and chemical processes for solid waste treatment applied to a crewed space habitat

Solid wastes can be processed for material and energy recovery using a number of unit operations and system approaches. The selection and configuration of unit operations and systems depends upon the characteristics of the wastes to be processed and the uses for recovered secondary materials and for recovered energy forms. The discussion focuses on the types of materials and forms of energy potentially recoverable from solid wastes, waste processing and conversion systems, and design considerations.     

Physical,Mechanical, and Morphological Characteristics of Extruded Starch Acetate Foams

Starch acetates with degrees of substitution (DS) of 0.57, 1.11, 1.68, and 2.23 were prepared and extruded with either water or ethanol. The microstructure, physical properties (radial expansion ratio [RER] and unit density), mechanical properties (spring index [SI] and compressibility), and crystalline structure of the foams were investigated. The functional properties were a function of DS and blowing agent type. When water was used as the blowing agent and DS increased, the foams were pale yellow, with rough and uneven surfaces. The cells were dense, with thick cell walls. Lower RER and SI, with higher DS, were associated with high unit density and compressibility. When ethanol was used as the blowing agent, contrary results were observed. The snow-white foams had smooth surfaces, uniform cells, and smooth cell walls. High RER and SI, and low unit density and compressibility were observed. The changes in SI and compressibility with RER also were examined and found to depend on the type of solvent. A crystalline pattern was observed because of the formation of well-ordered structures during extrusion.     

Formulating a VET roadmap for the waste and recycling sector: A case study from Queensland, Australia

Vocational Education and Training (VET) is an essential tool for providing waste management and recycling workers with the necessary skills and knowledge needed to beneficially influence their own employment and career development; and to also ensure productivity and safe working conditions within the organisations in which they are employed. Current training opportunities within Queensland for the sector are limited and not widely communicated or marketed; with other States, particularly Victoria and New South Wales, realising higher numbers of VET enrollments for waste management courses. This paper presents current VET opportunities and trends for the Queensland waste management sector. Results from a facilitated workshop to identify workforce requirements and future training needs organised by the Waste Contractors and Recyclers Association of Queensland (WCRAQ) are also presented and discussion follows on the future training needs of the industry within Queensland.     

油气开采钻井固体废物处理与利用研究现状

对比分析了我国部分地区油气开采钻井固体废物的污染特征,对普通钻井固体废物和含油钻井固体废物的无害化处理与资源化利用技术分别进行梳理和分析,主要包括固化处理技术、生物处理技术、不落地处理技术、资源化利用技术、萃取技术、热解析技术和组合处理技术等。结合当前存在的主要问题针对性地提出了4条对策建议:加强源头控制,减少钻井固体废物产生量;对钻井固体废物进行分质分级区别处理和利用;开发高效、低成本、低能耗的钻井固体废物处理技术,发展联合处理工艺;制定相关政策和标准,加强油气田污染治理的事中事后监管。     

Monitoring and Analysis of Water,Salt and Nutrient Fluxes at the Mouth of a Lagoon

An intensive sampling program of physical and chemical parameters has been undertaken at Vassova lagoon, northeast Greece, in order to examine water circulation and estimate the instantaneous and residual fluxes of water, salt, nutrients and chlorophyll-a through the entrance canal of this lagoon. Field data of hydrographic and water quality parameters were collected under neap and spring tidal cycles, and under winter and summer conditions, to account for the fortnight and seasonal effects in the lagoon. The analysis showed that the Eulerian residual transport is positive in direction during both tidal cycles, thus pushing water, salt, nitrate-nitrogen, phosphate-phosphorus and chlorophyll-a inward Vassova lagoon. Tidal pumping was mostly positive during the neap tide and negative during the spring tidal cycle, thus pushing water, salt, phosphorus and chlorophyll-a outwards of Vassova lagoon.     

Element partitioning in combustion- and gasification-based waste-to-energy units

A critical comparison between combustion- and gasification-based waste-to-energy systems needs a deep knowledge of the mass flows of materials and elements inside and throughout the units. The study collected and processed data from several moving grate conventional incinerators and high-temperature shaft gasifiers with direct melting, which are in operation worldwide. A material and substance flow analysis was then developed to systematically assess the flows and stocks of materials and elements within each waste-to-energy unit, by connecting the sources, pathways, and intermediate and final sinks of each species. The patterns of key elements, such as carbon, chloride and heavy metals, in the different solid and gaseous output streams of the two compared processes have been then defined. The combination of partitioning coefficients with the mass balances on atomic species and results of mineralogical characterization from recent literatures was used to estimate a composition of bottom ashes and slags from the two types of waste-to-energy technologies. The results also allow to quantify some of the performance parameters of the units and, in particular, the potential reduction of the amount of solid residues to be sent to final disposal.     

电动力修复铅镉复合污染土壤

采用电动力修复技术处理Pb、Cd复合污染土壤,考察了柠檬酸和乙二胺四乙酸二钠（EDTA）作为电解液对棕壤（ZR）和红壤（HR）两种我国典型壤质中Pb、Cd去除效果的影响。实验结果表明：在电压梯度为2 V/cm,修复时间为4 d的条件下,ZR的最佳电解液为EDTA,Pb、Cd平均去除率为13.2%和17.8%,HR的最佳电解液为柠檬酸,Pb、Cd的平均去除率为20.0%和33.8%;延长修复时间至10 d能显著提高HR中Pb、Cd的去除率,电解液为柠檬酸时Cd平均去除率达91.1%,电解液为EDTA时Pb平均去除率达63.2%,修复后土壤中Cd和Pb含量均低于建筑用地土壤污染风险筛选值。综合考虑能耗及修复效果,EDTA是高效且经济的修复电解液。     

生物吸附在染料废水处理中的应用

生物吸附是微生物细胞和其它物质发生的一系列非发酵关联的吸附过程,其主要作用包括物理和化学吸附、静电作用、离子交换、络合、螯合、微量沉淀等。与生物降解相比,生物吸附不会产生有毒的代谢产物,为染料废水的处理和回收提供了一条经济可行的途径。综述了微生物对染料吸附的作用机制及影响因素如pH、温度、染料初始浓度等,介绍了生物吸附的发展现状及前景。     

N2O回收利用及减排技术研究进展

减排N₂O对控制地球温室效应和保护人类健康具有重要的意义。综述了有关分离纯化N₂O的技术及N₂O回收利用于芳烃氧化制苯酚的研究进展,介绍了N₂O的热分解及催化分解等减排技术的研究成果。指出：采用N₂O直接氧化芳烃制苯酚技术需要解决的技术关键是开发高选择性的催化剂;催化分解是目前可行的N₂O减排技术,而制备高活性且抗O₂、水蒸气及硫化物干扰的催化剂是今后的研究热点。     

Bacterial degradation of a new polyester,polyethylene glycol-phthalate polyester

Microorganisms which can assimilate a new polyester synthesized from polyethylene glycol (PEG) as a dihydroxyl compound and phthalic acid as a dicarboxyl compound were isolated from soils by enrichment culture techniques. Two cultures, K and N, were obtained: Culture K grew on PEG 4000 polyester and culture N assimilated PEG 6000 polyester. Each culture included two bacteria indispensable for the degradation of polyesters: bacteria K1 and K2 for PEG 4000 polyester-utilizing culture K and bacteria N1 and N2 for PEG 6000 polyester-utilizing culture N. Bacteria K2 and N2 were responsible for the hydrolysis of ester bonds in a polyester and both were identified as the same species,Comamonas acidovorans. Bacteria K1 and N6 could assimilate PEG as a sole carbon and energy source. Both are Gram-negative, non-spore-forming rods and resembled each other on their colony characteristics, although strain K1 could not grow on PEG 6000.C. acidovorans N2 (K2) grew on dialkyl phthalates (C₂–C₄) and phthalate and tributyrin, but not on PEG, diphthalic PEG, and PEG phthalate polyesters. Their culture supernatant and washed cells hydrolyzed PEG (400–20,000) phthalate and sebacate polyesters.C. acidovorans had higher esterase activity toward PEG phthalate, isophthalate, and terephthalate polyesters than known esterase and lipases. The esterase seemed to be an extracellular one and attached to the cell surface.     

How are WEEE doing? A global review of the management of electrical and electronic wastes

This paper presents and critically analyses the current waste electrical and electronic equipment (WEEE) management practices in various countries and regions. Global trends in (i) the quantities and composition of WEEE; and (ii) the various strategies and practices adopted by selected countries to handle, regulate and prevent WEEE are comprehensively examined. The findings indicate that for (i), the quantities of WEEE generated are high and/or on the increase. IT and telecommunications equipment seem to be the dominant WEEE being generated, at least in terms of numbers, in Africa, in the poorer regions of Asia and in Latin/South America. However, the paper contends that the reported figures on quantities of WEEE generated may be grossly underestimated. For (ii), with the notable exception of Europe, many countries seem to be lacking or are slow in initiating, drafting and adopting WEEE regulations. Handling of WEEE in developing countries is typified by high rate of repair and reuse within a largely informal recycling sector. In both developed and developing nations, the landfilling of WEEE is still a concern. It has been established that stockpiling of unwanted electrical and electronic products is common in both the USA and less developed economies. The paper also identifies and discusses four common priority areas for WEEE across the globe, namely: (i) resource depletion; (ii) ethical concerns; (iii) health and environmental issues; and (iv) WEEE takeback strategies. Further, the paper discusses the future perspectives on WEEE generation, treatment, prevention and regulation. Four key conclusions are drawn from this review: global amounts of WEEE will continue unabated for some time due to emergence of new technologies and affordable electronics; informal recycling in developing nations has the potential of making a valuable contribution if their operations can be changed with strict safety standards as a priority; the pace of initiating and enacting WEEE specific legislation is very slow across the globe and in some cases non-existent; and globally, there is need for more accurate and current data on amounts and types of WEEE generated.     

包装印刷业VOCs污染特征分析

选取了北京市的14家大型包装印刷企业进行现场采样、监测,统计分析了生产工艺和原辅材料,识别了VOCs污染来源和排放节点。根据不同排放节点的特征搭建了相应的采样系统,并以此为基础考察了VOCs的排放特征、臭氧生成潜势和二次有机气溶胶(SOA)生成潜势。结果表明:包装印刷业所排放的VOCs以醇类和酯类为主;乙醇和异丙醇为主要的臭氧前体物,生产线和烘干集气系统排气口为主要的臭氧生成节点;烷烃和醇类为主要的SOA前体物,烘干集气系统排气口为首要的SOA生成节点。     

乡镇垃圾分类循环利用现状——以闽侯县上街镇为例

由于我国乡镇经济的迅速发展以及乡镇村民生活水平加速提高,乡镇的垃圾种类及数量趋向于城市.乡镇村民居住较为分散,垃圾分类、收集、循环利用相较于城市困难,因此推进乡镇垃圾分类循环利用迫在眉睫.本文从闽侯县上街镇展开调查,以乡镇垃圾分类、回收循环利用为关键词展开分析,并从上街镇垃圾分类循环利用模式存在的问题进行分析、总结和建...     

Guidelines for the evaluation and assessment of the sustainable use of resources and of wastes management at healthcare facilities.

This paper presents guidelines that can be used by managers of healthcare facilities to evaluate and assess the quality of resources and waste management at their facilities and enabling the principles of sustainable development to be addressed. The guidelines include the following key aspects which need to be considered when completing an assessment. They are: (a) general management; (b) social issues; (c) health and safety; (d) energy and water use; (e) purchasing and supply; (f) waste management (responsibility, segregation, storage and packaging); (g) waste transport; (h) recycling and re-use; (i) waste treatment; and (j) final disposal. They identify actions required to achieve a higher level of performance which can readily be applied to any healthcare facility, irrespective of the local level of social, economic and environmental development. The guidelines are presented, and the characteristics of facilities associated with sustainable (level 4) and unsustainable (level 0) healthcare resource and wastes management are outlined. They have been used to assess a major London hospital, and this highlighted a number of deficiencies in current practice, including a lack of control over purchasing and supply, and very low rates of segregation of municipal solid waste from hazardous healthcare waste.     

核化危害源项反演技术现状及研究展望

源项反演对缓解和遏制核化危害源、精准预测核化危害时空传输和扩散情况、辅助作战行动和保障决策等具有十分重要的意义.本文从源项反演应用平台和源项反演关键算法(包括欧拉方法、拉格朗日方法、深度学习等)两个方面,对国内外核化危害源项反演技术的现状和二者间的差距进行了总结与分析.研究指出,利用深度学习提高反演精度和速率、从单污染...     

Phosphorus Storage in Fine Channel Bed Sediments

Deposition and storage of fine sediment on channel beds represents an important component of a catchment’s sediment budget and can have important implications for sediment-associated P fluxes, due to storage and remobilisation, and for P concentrations through water–sediment interactions. Spatial and temporal variations in P content and storage in fine bed sediment have been studied in two UK lowland catchments, the Rivers Frome and Piddle in Dorset. Fine bed sediment was sampled in representative reaches on a bi-monthly basis using a re-suspension cylinder, and the resulting samples were analysed for total P, a range of P fractions and particle size. The results demonstrate significant spatial and temporal variability in PP concentrations and storage, with maximum and minimum P concentrations and storage occurring in late summer and winter, respectively. Temporal variations in concentrations reflect residence times of the sediment and ambient P concentrations, while variations in storage are mainly due to hydrological regimes. Spatial variations reflect catchment characteristics, the location of inputs and local variations in hydrological and channel bed conditions.     

Removal of Cr6 + and Ni2+ from aqueous solution using bagasse and fly ash

Raw bagasse and fly ash, the waste generated in sugar mills and boilers respectively have been used as low-cost potential adsorbents. Raw bagasse was pretreated with 0.1N NaOH followed by 0.1N CH3COOH before its application. These low-cost adsorbents were used for the removal of chromium and nickel from an aqueous solution. The kinetics of adsorption and extent of adsorption at equilibrium are dependent on the physical and chemical characteristics of the adsorbent, adsorbate and experimental system. The effect of hydrogen ion concentration, contact time, sorbent dose, initial concentrations of adsorbate and adsorbent and particle size on the uptake of chromium and nickel were studied in batch experiments. The Sorption data has been correlated with Langmuir, Freundlich and Bhattacharya and Venkobachar adsorption models. The efficiencies of adsorbent materials for the removal of Cr(VI) and Ni(II) were found to be between 56.2 and 96.2% and 83.6 and 100%, respectively. These results were obtained at the optimized conditions of pH, contact time, sorbent dose, sorbate concentration of 100 mg/l and with the variation of adsorbent particles size between 0.075 and 4.75 mm. The order of selectivity is powdered activated carbon > bagasse > fly ash for Cr(VI) removal and powdered activated carbon > fly ash > bagasse for Ni(II) removal.