Techno-economic assessment of waste sorting scenarios regional case study: Madaba sorting plant,Jordan

Journal of Material Cycles and Waste Management - Material Recovery Facilities (MRF) shall play a strategic role in developing countries to satisfy the sustainable development. The aim of this...     

Correction to: Review on evolution of municipal solid waste management in India: practices,challenges and policy implications

Journal of Material Cycles and Waste Management -     

Correction to: Effect of feed slurry dilution and total solids on specific biogas production by anaerobic digestion in batch and semi-batch reactors

Journal of Material Cycles and Waste Management -     

Assessment of the cementitious and microstructural characteristics of an innovative waste-based eco-cement

Journal of Material Cycles and Waste Management - The cementitious and microstructural characteristics of an innovative waste-based eco-cement consisting of ground granulated blast-furnace slag...     

Evaluation of physico-chemical and structural properties of biochar produced from pyrolysis of urban biowaste

Journal of Material Cycles and Waste Management - Understanding proper utilization and evaluation of biowaste materials in any metropolitan city across the world is crucial with respect to...     

Recycling of low-silicate iron tailings in the production of lightweight building materials

Journal of Material Cycles and Waste Management - A feasible process for preparing lightweight building materials from the low-silicate iron tailings was developed. Various proportions of...     

Optimization of microwave treatment for dewaterability enhancement of electroplating sludge

Journal of Material Cycles and Waste Management - In this study, the dewaterability characteristics of electroplating sludge have been investigated after treatment with microwave irradiation. While...     

Conversion of chicken feather waste via hydrothermal carbonization: process optimization and the effect of hydrochar on seed germination of Acacia auriculiformis

Journal of Material Cycles and Waste Management - Using statistical response surface methodology this paper primarily investigates the role of process parameters at different levels (temperature,...     

Recycling of industrial waste material of fly ash cenosphere for the treatment of car wash water effluent

Journal of Material Cycles and Waste Management - This study presents the investigation on the preparation, characterisation and utilisation of the modified industrial waste material of Fly Ash...     

Evaluation by year of the valuable/hazardous material content of lithium-ion secondary battery cells and other components of notebook computer battery packs

Journal of Material Cycles and Waste Management - Our objective was to provide the information necessary to efficiently recover metals from end-of-life lithium-ion secondary batteries by assessing...     

Plastic waste management: is circular economy really the best solution?

Journal of Material Cycles and Waste Management -     

Announcement

Journal of Material Cycles and Waste Management -     

Improvement of energy recovery potential of wet-refuse-derived fuel through bio-drying process

Journal of Material Cycles and Waste Management - This paper proposes novel wet-refuse-derived fuel (Wet-RDF) bio-drying process with the variation of initial organic substrate and moisture...     

Evaluation of properties and composition of the mixed municipal waste fine fraction,the case study of Czech Republic

Journal of Material Cycles and Waste Management - Estimation of mixed municipal waste composition is important for the option of suitable waste treatment. Many studies have presented their...     

Eddy current separation of broken lithium battery products in consideration of the shape factor

Journal of Material Cycles and Waste Management - Among the common recycling methods for lithium battery materials, pyrometallurgy recycling leads to high energy consumption and carbon emission...     

Influence of ferrochrome ash on mechanical and microstructure properties of ambient cured fly ash-based geopolymer concrete

Journal of Material Cycles and Waste Management - Earlier studies indicated that the reactive MgO reduces shrinkage crack and porosity, and accelerates the hydration and strength development....     

Economic evaluation of thermochemical conversion of municipal solid waste to syngas: a case study of Cape Town municipality

Journal of Material Cycles and Waste Management - Thermochemical conversions of the combustible components of municipal solid waste (MSW) minimize the emissions and net effects of greenhouse gas...     

The impact of the policy of municipal solid waste source-separated collection on waste reduction: a case study of China

Journal of Material Cycles and Waste Management - To fight against environmental pressure arising from growing municipal solid waste (MSW), the program of MSW source-separated collection has been...     

Experimental study on reuse of recycled concrete aggregates for load-bearing components of building structures

Journal of Material Cycles and Waste Management - Recycled aggregates recovered from abandoned buildings or demolished concrete structures were reused to produce concrete columns as new building...     

Evaluation of compositional characteristics of organic waste shares in municipal solid waste in fast-growing metropolitan cities of India

Journal of Material Cycles and Waste Management - India currently has the second largest urban population worldwide, while facing an increasing burden on its urban solid waste infrastructure. To...