Characterization of urban solid waste in Chihuahua, Mexico

The characterization of urban solid waste generation is fundamental for adequate decision making in the management strategy of urban solid waste in a city. The objective of this study is to characterize the waste generated in the households of Chihuahua city, and to compare the results obtained in areas of the city with three different socioeconomic levels. In order to identify the different socioeconomic trends in waste generation and characterization, 560 samples of solid waste were collected during 1 week from 80 households in Chihuahua and were hand sorted and classified into 15 weighted fractions. The average waste generation in Chihuahua calculated in this study was 0.676 kg per capita per day in April 2006. The main fractions were: organic (48%), paper (16%) and plastic (12%). Results show an increased waste generation associated with the socioeconomic level. The characterization in amount and composition of urban waste is the first step needed for the successful implementation of an integral waste management system.     

LCA of selective waste collection systems in dense urban areas

This paper presents research concerning the environmental analysis of the selective collection management of municipal solid waste. The main goal of this study is to quantify and to compare, by means of Life Cycle Assessment (LCA), the potential environmental impacts of three selective collection systems modelled on densely populated urban areas. These systems are: the mobile pneumatic, the multi-container and the door-to-door. Impact assessment method based on CML 2 baseline 2000 is applied to the different systems. The study separates and analyzes the collection systems in substages: two urban substages and one inter-city substage. At the urban level, the multi-container system has the least environmental impact of all systems. The mobile pneumatic system has greater environmental impacts in terms of global warming, fresh water aquatic ecotoxicity, terrestrial ecotoxicity, acidification and eutrophication. In this system, the pipes and the pneumatic transport have the greatest impacts. The door-to-door system has a greatest environmental impact in terms of abiotic depletion, ozone layer depletion and human toxicity. An overall evaluation of the three substages, with a sensitivity analysis, indicates that the mobile pneumatic system at an inter-city distance of 20 km shows the greatest environmental impacts and the greatest energy demand. Inter-city transport is key; the results show that from an inter-city distance of 11 km onwards, this becomes the substage which most contributes to global warming impact and energy demand, in all the systems.     

Bioconversion of lawn waste amended with kitchen waste and buffalo dung in to value-added vermicompost using Eisenia foetida to alleviate landfill burden

Journal of Material Cycles and Waste Management - Enormous quantities of waste such as lawn waste (LW) and kitchen waste (KW) are generated in urban institutes, proper management of which is...     

Waste landfill plant and waste disposal plant efficiencies in China

Journal of Material Cycles and Waste Management - As resident awareness of environmental issues has grown, waste disposal has become an important part of urban environmental governance. Most...     

Municipal solid waste management challenges in developing countries--Kenyan case study

This paper provides an overview of the state of municipal solid waste management (MSWM) by local authorities in Kenya as a case study of a low-income developing country. Approaches of possible solutions that can be undertaken to improve municipal solid waste (MSW) services are discussed. Poor economic growth (1.1% in 1993) has resulted in an increase in the poverty level which presently stands at 56%. Migration from the rural areas to the urban areas has resulted in unplanned settlements in suburban areas accommodating about 60% of the urban population on only 5% urban land area. Political interference also hampers smooth running of local authorities. Vulnerability of pollution of surface and groundwater is high because local authorities rarely considered environmental impact in siting MSW disposal sites. Illegal dumping of MSW on the river banks or on the roadside poses environmental and economic threats on nearby properties. Poor servicing of MSW collection vehicles, poor state of infrastructure and the lack of adequate funding militate against optimization of MSW disposal service. The rural economy needs to be improved if rural-urban migration is to be managed. Involvement of stakeholders is important to achieve any meaningful and sustainable MSWM. The role of the informal sector through community-based organizations (CBOs), Non-Governmental Organizations (NGOs) and the private sector in offering solutions towards improvement of MSWM also is explored.     

Report: integrated industrial waste management systems in China.

Various models of urban sustainable development have been introduced in recent years and some of these such as integrated waste management have been proved to be of particular value. Integrated industrial waste management systems include all the administrative, financial, legal, planning and engineering functions involved in solutions to the problems of industrial waste. Even though the pace of the improvement made to China's industrial waste management capacity is impressive, China has been unable to keep up with the increasing demand for waste management. This paper will evaluate the application of integrated industrial waste management systems in promoting urban sustainable development in the context of three case study cities in China (positive case, average case and negative case) by identifying and accessing the factors that affect the success or failure of integrated industrial waste management systems.     

A goal-oriented characterization of urban waste

More stringent requirements for the protection of the environment coupled with new incentives for materials recovery, lead modern waste management practice on the line of a more differentiated approach. Separation, or more precisely, non-mixing at the source, is one of the most promising strategies. However, before deciding which categories of urban waste should be collected separately, it is useful to have more detailed knowledge regarding the characteristics of waste. A 5-year investigation has produced enough information to answer such questions as “if one decides to convert food and garden waste to compost instead of burning them, how much less cadmium would be released into the atmosphere?” or, “if the quantities of mercury released into the environment should be drastically reduced, which categories of waste should be collected and treated separately?” This paper discusses sampling and analytical techniques and defines what is a representative sample. It presents the methods applied to determine the annual flow of various chemical elements from 52 waste categories from a European urban area. The results determined through this approach are compared to the total outputs in the gas, wastewater, cinders and fly ashes of the incinerator which currently burns these wastes.     

Factors influencing waste separation and utilization among households in the Lake Victoria crescent,Uganda

Wastes, which are the by-products of consumption, are a growing problem in the urban and peri-urban areas of the Lake Victoria region largely due to high urban population growth rates, consumption habits, low collection rates and hence waste accumulation. Whereas the biodegradable proportion is high and could be reutilized, a few have tapped the economic potential of this waste. This study was conducted to explore the potential alternatives and determinants of waste separation and utilization among urban and peri-urban households in the Lake Victoria crescent. A random sample of households in five urban and peri-urban areas of the crescent were selected and surveyed. Logit models were used to establish the factors influencing waste separation and utilization in urban and peri-urban areas of the lake crescent. Results indicate that, gender, peer influence, land size, location of household and membership of environmental organization explain household waste utilization and separation behaviour. Campaigns for waste separation and reuse should be focused in the peri-urban areas where high volumes of wastes are generated and accumulate. Social influence or pressure should be used to encourage more waste reuse and separation.     

Policy-making coordination of municipal solid waste policies in China: a content analysis

Journal of Material Cycles and Waste Management - Massive urbanization and rapid development of urban economy have increased the generation of municipal solid waste in China. Like all developing...     

Towards zero waste in emerging countries - a South African experience

The aim of this paper is to describe the optimisation of Waste Minimisation/Zero Waste strategies into an already established integrated waste management system and to present a Zero Waste model for post-consumer waste for urban communities in South Africa. The research was undertaken towards the fulfilment of the goals of the Polokwane Declaration on Waste Management [DEAT, 2001. Department of Environmental Affairs and Tourism, Government of South Africa. Polokwane Declaration. Drafted by Government, Civil Society and the Business Community. National Waste Summit, Polokwane, 26-28 September 2001], which has set as its target the reduction of waste generation and disposal by 50% and 25%, respectively, by 2012 and the development of a plan for Zero Waste by 2022. Two communities, adjacent to the Mariannhill Landfill site in Durban, were selected as a case study for a comparative analysis of formal and informal settlements. Since the waste generated from these two communities is disposed of at the Mariannhill landfill, the impact of Zero Waste on landfill volumes could be readily assessed. A Zero Waste scheme, based on costs and landfill airspace savings, was proposed for the area. The case study demonstrates that waste minimisation schemes can be introduced into urban areas, in emerging countries, with differing levels of service and that Zero Waste models are appropriate to urban areas in South Africa.     

Integrated approach to solid waste management in Chennai: an Indian metro city

Management of municipal solid waste is a major problem for most of the Indian cities due to the growing urban population and per capita waste generation rate, inadequate public participation and the deplorable organizational and financial capacities of urban local bodies. This article highlights the interventions required for sustainable solid waste management in Indian cities by analyzing the waste generation, collection, and disposal scenario of a metro city in India along with the regulatory and institutional frame work. It advocates a phased and integrated approach taking into account the operational hurdles and the capacity building of local bodies with the support of educational organizations.     

Cost effective waste management through composting in Africa

Greenhouse gas (GHG) emissions per person from urban waste management activities are greater in sub-Saharan African countries than in other developing countries, and are increasing as the population becomes more urbanised. Waste from urban areas across Africa is essentially dumped on the ground and there is little control over the resulting gas emissions. The clean development mechanism (CDM), from the 1997 Kyoto Protocol has been the vehicle to initiate projects to control GHG emissions in Africa. However, very few of these projects have been implemented and properly registered. A much more efficient and cost effective way to control GHG emissions from waste is to stabilise the waste via composting and to use the composted material as a soil improver/organic fertiliser or as a component of growing media. Compost can be produced by open windrow or in-vessel composting plants. This paper shows that passively aerated open windrows constitute an appropriate low-cost option for African countries. However, to provide an usable compost material it is recommended that waste is processed through a materials recovery facility (MRF) before being composted. The paper demonstrates that material and biological treatment (MBT) are viable in Africa where they are funded, e.g. CDM. However, they are unlikely to be instigated unless there is a replacement to the Kyoto Protocol, which ceases for Registration in December 2012.     

Sources and factors controlling the disposal of biodegradable municipal solid waste in urban and rural areas of Cyprus

An inventory of sources of biodegradable municipal soil waste (BMSW) was constructed for urban and rural areas in the EU accession region of Cyprus. Composition analysis was performed on source-separated BMSW collected from households in the rural Ergates Community and an urban area within the Agglanjia Municipality. The data were statistically scrutinized to identify the main factors influencing the quantities of BMSW disposed by urban and rural communities in Cyprus. The results were extrapolated to predict the quantities and types of BMSW disposed by the entire communities. Significantly more BMSW was disposed in the urban area compared to the rural community due to lower diversion rates for green waste and the disposal of food waste from commercial sources. The quantity of food waste collected from households was influenced by socio-economic (household size, income, percentage of children) and behavioural (feeding of food waste to domestic animals, consuming processed 'ready' food) factors, whereas garden size, the type of vegetation, the reuse of trimmings and home composting were the main factors controlling the disposal of green waste.     

A multiple criteria analysis for household solid waste management in the urban community of Dakar

Household solid waste management is a severe problem in big cities of developing countries. Mismanaged solid waste dumpsites produce bad sanitary, ecological and economic consequences for the whole population, especially for the poorest urban inhabitants. Dealing with this problem, this paper utilizes field data collected in the urban community of Dakar, in view of ranking nine areas of the city with respect to multiple criteria of nuisance. Nine criteria are built and organized in three families that represent three classical viewpoints: the production of wastes, their collection and their treatment. Thanks to the method PROMETHEE and the software ARGOS, we do a pair-wise comparison of the nine areas, which allows their multiple criteria rankings according to each viewpoint and then globally. Finding the worst and best areas in terms of nuisance for a better waste management in the city is our final purpose, fitting as well as possible the needs of the urban community. Based on field knowledge and on the literature, we suggest applying general and area-specific remedies to the household solid waste problems.     

日本《废弃物处理法》对我国城市生活垃圾分类立法的启示

住房和城乡建设部发布《生活垃圾分类标志》新标准,城市生活垃圾分类工作逐步推进,但是仍然存在尚待完善之处。日本《废弃物处理法》是日本生活垃圾分类治理的立法依据,其成功经验颇值得借鉴。在总结《日本废弃物处理法》的立法概况和分析其城市生活垃圾分类立法特征的基础上,探讨我国城市生活垃圾分类立法现状,从立法目的与原则、城市生活垃圾分类标准、各主体的法律责任及惩罚措施4个维度提出具体优化路径。     

Comparing urban solid waste recycling from the viewpoint of urban metabolism based on physical input-output model: A case of Suzhou in China

Investigating impacts of urban solid waste recycling on urban metabolism contributes to sustainable urban solid waste management and urban sustainability. Using a physical input-output model and scenario analysis, urban metabolism of Suzhou in 2015 is predicted and impacts of four categories of solid waste recycling on urban metabolism are illustrated: scrap tire recycling, food waste recycling, fly ash recycling and sludge recycling. Sludge recycling has positive effects on reducing all material flows. Thus, sludge recycling for biogas is regarded as an accepted method. Moreover, technical levels of scrap tire recycling and food waste recycling should be improved to produce positive effects on reducing more material flows. Fly ash recycling for cement production has negative effects on reducing all material flows except solid wastes. Thus, other fly ash utilization methods should be exploited. In addition, the utilization and treatment of secondary wastes from food waste recycling and sludge recycling should be concerned.     

Key factors in levels of public satisfaction with urban waste collection in a northern Spain city

Journal of Material Cycles and Waste Management - Levels of public satisfaction among the inhabitants of Burgos with their urban waste collection service are analyzed by comparing satisfaction...     

Carbon emissions reduction strategies in Africa from improved waste management: A review

The paper summarises a literature review into waste management practices across Africa as part of a study to assess methods to reduce carbon emissions. Research shows that the average organic content for urban Municipal Solid Waste in Africa is around 56% and its degradation is a major contributor to greenhouse gas emissions. The paper concludes that the most practical and economic way to manage waste in the majority of urban communities in Africa and therefore reduce carbon emissions is to separate waste at collection points to remove dry recyclables by door to door collection, compost the remaining biogenic carbon waste in windrows, using the maturated compost as a substitute fertilizer and dispose the remaining fossil carbon waste in controlled landfills.     

The current municipal solid waste management situation in Tibet

The Tibetan Plateau has an average altitude of more than 4,000 m. The total area of Tibetan Plateau is 2,400,000 km2, which occupies 25% of the area of China. Due to the high altitude, the environment has low atmospheric pressure, low oxygen content, and low temperature, and is also fragile. Investigations concerning MSW generation and characteristics, MSW management, collection and transportation, and treatment and disposal of MSW covered four representative cities, including the urban areas of Lhasa city, Shigatse, Nedong of Lhoka and Bayi of Nyingtri. The results show that MSW generation in the urban areas of Lhasa city and Tibet were 450 t/d and 3,597 t/d, respectively, in 2006. However, accelerated economic development and flourishing tourism caused by the opening of the Qinghai-Tibet Railway (QTR) have greatly increased solid waste generation to a new high. It is predicted that MSW generation in Tibet will reach 4,026 t/d in 2010 and 4,942 t/d in 2020. MSW management and disposal lag behind MSW generation due to a number of factors such as equipment shortage, insufficient maintenance, exhaustion of waste treatment capacity and low recycling efficiency. Still, MSW in most areas is dumped in the open with no controls. Because no appropriate collection and treatment systems for leachate and landfill gas exist, untreated leachate is discharged directly into the environment, causing serious secondary pollution. Some suggestions on improving the MSW management system are presented in this paper.