Chemical-mineralogical characterization of C&D waste recycled aggregates from São Paulo, Brazil

This study presents a methodology for the characterization of construction and demolition (C&;D) waste recycled aggregates based on a combination of analytical techniques (X-ray fluorescence (XRF), soluble ions, semi-quantitative X-ray diffraction (XRD), thermogravimetric analysis (TGA-DTG) and hydrochloric acid (HCl) selective dissolution). These combined analytical techniques allow for the estimation of the amount of cement paste, its most important hydrated and carbonated phases, as well as the amount of clay and micas. Details of the methodology are presented here and the results of three representative C&;D samples taken from the São Paulo region in Brazil are discussed. Chemical compositions of mixed C&;D aggregate samples have mostly been influenced by particle size rather than the visual classification of C&;D into red or grey and geographical origin. The amount of measured soluble salts in C&;D aggregates (0.15–25.4 mm) is lower than the usual limits for mortar and concrete production. The content of porous cement paste in the C&;D aggregates is around 19.3% (w/w). However, this content is significantly lower than the 43% detected for the C&;D powders (<0.15 mm). The clay content of the powders was also high, potentially resulting from soil intermixed with the C&;D waste, as well as poorly burnt red ceramic. Since only about 50% of the measured CaO is combined with CO₂, the powders have potential use as raw materials for the cement industry.     

Assessment of the environmental impact of management measures for the biodegradable fraction of municipal solid waste in São Paulo City

There is increasing concern about landfilling of biodegradable wastes. Therefore, biological treatment processes such as composting and biogasification have been considered as alternative strategies for managing those wastes. In this work, life cycle assessment was employed to compare the environmental impacts of landfilling, composting, and biological treatment of municipal solid waste in S?o Paulo City, Brazil. Energy consumption, recovered resources, and emissions to air and water were quantified and analyzed in terms of their potential contribution to global warming, acidification, and nutrient enrichment impact. The results demonstrated that processes that require high levels of energy consumption, such as wastewater treatment, play an important role in the outcome of environmental impact potentials. It was found that the landfilling of all waste is generally the worst strategy from an environmental point of view. However, significant reductions in the resulting impacts can be accomplished through biogasification and composting of the biodegradable fraction. Regarding composting, the application of a biofilter for gas treatment reduced significantly the gaseous emissions.     

Assessment of medical waste management at a primary health-care center in São Paulo,Brazil

According to the Brazilian law, implementation of a Medical Waste Management Plan (MWMP) in health-care units is mandatory, but as far as we know evaluation of such implementation has not taken place yet. The purpose of the present study is to evaluate the improvements deriving from the implementation of a MWMP in a Primary Health-care Center (PHC) located in the city of São Paulo, Brazil. The method proposed for evaluation compares the first situation prevailing at this PHC with the situation 1 year after implementation of the MWMP, thus allowing verification of the evolution of the PHC performance. For prior and post-diagnosis, the method was based on: (1) application of a tool (check list) which considered all legal requirements in force; (2) quantification of solid waste subdivided into three categories: infectious waste and sharp devices, recyclable materials and non-recyclable waste; and (3) identification of non-conformity practices. Lack of knowledge on the pertinent legislation by health workers has contributed to non-conformity instances. The legal requirements in force in Brazil today gave origin to a tool (check list) which was utilized in the management of medical waste at the health-care unit studied. This tool resulted into an adequate and simple instrument, required a low investment, allowed collecting data to feed indicators and also conquered the participation of the unit whole staff. Several non-conformities identified in the first diagnosis could be corrected by the instrument utilized. Total waste generation increased 9.8%, but it was possible to reduce the volume of non-recyclable materials (11%) and increase the volume of recyclable materials (4%). It was also possible to segregate organic waste (7%), which was forwarded for production of compost. The rate of infectious waste generation in critical areas decreased from 0.021 to 0.018 kg/procedure. Many improvements have been observed, and now the PHC complies with most of legal requirements, offers periodic training and better biosafety conditions to workers, has reduced the volume of waste sent to sanitary landfills, and has introduced indicators for monitoring its own performance. This evaluation method might subsidize the creation and evaluation of medical waste management plans in similar heath institutions.     

Acid Rain in Downtown São Paulo City, Brazil

During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown São Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, $ \rm NH^{ + }_{4} During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown S?o Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, , K⁺, Ca²⁺, Mg²⁺, Cl⁻, , ) and carboxylic acids (acetic, formic and oxalic) using ion chromatography. The volume weighted mean, VWM, of the anions , and Cl⁻ was, respectively, 20.3, 12.1 and 10.7 μmol l⁻¹. Rainwater in S?o Paulo was acidic, with 55% of the samples exhibiting a pH below 5.6. The VWM of the free H⁺ was 6.27 μmol l⁻¹), corresponding to a pH of 5.20. Ammonia (NH₃), determined as (VWM = 32.8 μmol l⁻¹), was the main acidity neutralizing agent. Considering that the H⁺ ion is the only counter ion produced from the non-sea-salt fraction of the dissociated anions, the contribution of each anion to the free acidity potential has the following profile: (31.1%), (26.0%), CH₃COO⁻ (22.0%), Cl⁻ (13.7%), HCOO⁻ (5.4%) and (1.8%). The precipitation chemistry showed seasonal differences, with higher concentrations of ammonium and calcium during autumn and winter (dry period). The marine contribution was not significant, while the direct vehicular emission showed to be relevant in the ionic composition of precipitation.     

A survey on municipal solid waste and residents’ awareness in Da Nang city, Vietnam

A survey on solid waste generation and residents’ awareness was conducted in Da Nang city, Vietnam in 2010. We took samples from residents, hotels, restaurants, and city markets. Data reveals that each resident generates on average 0.71 kg/capita/day (3 kg/household/day). Regarding the composition, organic waste (food, flowers, leaves, grass) accounts for about 70 % of residents’ waste followed by plastics. Likewise, about 14 % of residents’ waste can be recycled. Furthermore, we find that middle income households in the suburbs have the largest waste generation with 4.9 kg/household/day. We consider that this finding is explained by their dedication to agricultural activities, such as planting fruit trees and vegetables, and gardening. Finally, we find that only about 60 % of interviewees have knowledge of how to segregate waste, however more than 90 % of them are willing to cooperate with the introduction of a waste segregation program in the city.     

Wasteful waste-reducing policies? The impact of waste reduction policy instruments on collection and processing costs of municipal solid waste

We study the impact of some local policies aimed at municipal solid waste (MSW) reduction on the cost efficiency of MSW collection and disposal. We explicitly account for differences between municipalities in background conditions by using a bootstrapped version of the Data Envelopment Analysis methodology in combination with a matching technique. Using data on 299 municipalities in Flanders, Belgium, for the year 2003, our results indicate that municipalities that are member of a waste collection joint venture, or that subscribe to a voluntary agreement to reduce MSW at the highest ambition level, collect and process MSW more efficiently than other municipalities. Weekly instead of two-weekly waste collection, or using a weight-based pricing system appears to have no impact on efficiency. Our results show that aiming at MSW reduction does not lead to lower efficiency of public service provision, even on the contrary.     

Financial sustainability in municipal solid waste management – Costs and revenues in Bahir Dar,Ethiopia

Providing good solid waste management (SWM) services while also ensuring financial sustainability of the system continues to be a major challenge in cities of developing countries. Bahir Dar in northwestern Ethiopia outsourced municipal waste services to a private waste company in 2008. While this institutional change has led to substantial improvement in the cleanliness of the city, its financial sustainability remains unclear. Is the private company able to generate sufficient revenues from their activities to offset the costs and generate some profit?This paper presents a cost-revenue analysis, based on data from July 2009 to June 2011. The analysis reveals that overall costs in Bahir Dar’s SWM system increased significantly during this period, mainly due to rising costs related to waste transportation. On the other hand, there is only one major revenue stream in place: the waste collection fee from households, commercial enterprises and institutions. As the efficiency of fee collection from households is only around 50%, the total amount of revenues are not sufficient to cover the running costs. This results in a substantial yearly deficit. The results of the research therefore show that a more detailed cost structure and cost-revenue analysis of this waste management service is important with appropriate measures, either by the privates sector itself or with the support of the local authorities, in order to enhance cost efficiency and balance the cost-revenues towards cost recovery. Delays in mitigating the evident financial deficit could else endanger the public-private partnership (PPP) and lead to failure of this setup in the medium to long term, thus also endangering the now existing improved and currently reliable service.We present four options on how financial sustainability of the SWM system in Bahir Dar might be enhanced: (i) improved fee collection efficiency by linking the fees of solid waste collection to water supply; (ii) increasing the value chain by sales of organic waste recycling products; (iii) diversifying revenue streams and financing mechanisms (polluter-pays-, cross-subsidy- and business-principles); and (iv) cost reduction and improved cost-effectiveness.We argue that in a PPP setup such as in Bahir Dar, a strong alliance between the municipality and private enterprise is important so that appropriate solutions for improved financial sustainability of a SWM system can be sought and implemented.     

Challenges to reducing post-consumer plastic rejects from the MSW selective collection at two MRFs in São Paulo city,Brazil

Journal of Material Cycles and Waste Management - ​The present study is concerned with an overview of the main aspects of the selective collection from the municipal solid waste in São...     

Formation characteristics of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and coplanar PCBs in fly ash from a gasification–melting process of municipal solid waste

PCDDs/DF and Co-PCB (dioxin) formations were studied with ash from a newly developed gasification and melting process for municipal solid waste. Ash samples were heated in a laboratory-scale fixed-bed reactor. Emphasis was placed on the effects of the type and composition of ash, temperatures, gas residence time, and gaseous organic precursors. Investigations using macroscopic and homologue distribution analyses led to the following conclusion. The ash from the gasification–melting process had the ability to generate dioxins in flue gas. A possible carbon source is unburned carbon in the ash samples, although this was very low (less than 0.01%). An experimental result that the level of dioxins generated from preheated fly ash obtained from a conventional incinerator was much lower than that from nonheated fly ash supported this conclusion. Dioxin concentrations obviously showed temperature dependence and peaked at 350°C. Dioxins formed in a gasification–melting process ash were readily desorbed from the surface, probably because of the low carbon content of the ash. There was no experimental evidence that gaseous organic precursors fed to the reactor generated dioxins. Therefore, an organic precursor was not essential for the formation of dioxins. A good linear relationship obtained between PCDDs/DFs and gas residence time also supported the assumption. Received: February 14, 2000 / Accepted: June 30, 2000     

The effects of the mechanical–chemical stabilization process for municipal solid waste incinerator fly ash on the chemical reactions in cement paste

A water extraction process can remove the soluble salts present in municipal solid waste incinerator (MSWI) fly ash, which will help to increase the stability of the synthetic materials produced from the MSWI fly ash. A milling process can be used to stabilize the heavy metals found in the extracted MSWI fly ash (EA) leading to the formation of a non-hazardous material. This milled extracted MSWI fly ash (MEA) was added to an ordinary Portland cement (OPC) paste to induce pozzolanic reactions. The experimental parameters included the milling time (96 h), water to binder ratios (0.38, 0.45, and 0.55), and curing time (1, 3, 7 and 28 days). The analysis procedures included inductively coupled plasma atomic emission spectroscopy (ICP/AES), BET, mercury intrusion porosimetry (MIP), X-ray diffraction (XRD), and nuclear magnetic resonance (NMR) imaging. The results of the analyses indicate that the milling process helped to stabilize the heavy metals in the MEA, with an increase in the specific surface area of about 50 times over that of OPC. The addition of the MEA to the OPC paste decreased the amount of Ca(OH)₂ and led to the generation of calcium–silicate–hydrates (C–S–H) which in turned increased the amount of gel pores and middle sized pores in the cement. Furthermore, a comparison shows an increase in the early and later strength over that of OPC paste without the addition of the milled extracted ash. In other words, the milling process could stabilize the heavy metals in the MEA and had an activating effect on the MEA, allowing it to partly substitute OPC in OPC paste.