Reliability-based maintenance optimization of corrosion preventive designs under a life cycle perspective

Sustainability is of paramount importance when facing the design of long lasting, maintenance demanding structures. In particular, a sustainable life cycle design for concrete structure exposed to aggressive environments may lead to significant economic savings, and to reduced environmental consequences. The present study evaluates 18 different design alternatives for an existing concrete bridge deck exposed to chlorides, analyzing the economic and environmental impacts associated with each design as a function of the maintenance interval chosen. Results are illustrated in the context of a reliability-based maintenance optimization on both life cycle costs and life cycle environmental impacts. Maintenance optimization results in significant reductions of life cycle impacts if compared to the damage resulting from performing the maintenance actions when the end of the service life of the structure is reached. The use of concrete with 10% silica fume has been shown to be the most effective prevention strategy against corrosion of reinforcement steel in economic terms, reducing the life cycle costs of the original deck design by 76%. From an environmental perspective, maintenance based on the hydrophobic treatment of the concrete deck surface results in the best performance, allowing for a reduction of the impacts associated with the original design by 82.8%.     

Promoting system-level learning from project-level lessons: An analysis of donor-driven ‘indirect’ learning about EIA systems in Ghana and the Maldives

A growing number of low and middle income nations (LMCs) have adopted some sort of system for environmental impact assessment (EIA). However, generally many of these EIA systems are characterised by a low performance in terms of timely information dissemination, monitoring and enforcement after licencing. Donor actors (such as the World Bank) have attempted to contribute to a higher performance of EIA systems in LMCs by intervening at two levels: the project level (e.g. by providing scoping advice or EIS quality review) and the system level (e.g. by advising on EIA legislation or by capacity building). The aims of these interventions are environmental protection in concrete cases and enforcing the institutionalisation of environmental protection, respectively. Learning by actors involved is an important condition for realising these aims. A relatively underexplored form of learning concerns learning at EIA system-level via project level donor interventions. This ‘indirect’ learning potentially results in system changes that better fit the specific context(s) and hence contribute to higher performances. Our exploratory research in Ghana and the Maldives shows that thus far, ‘indirect’ learning only occurs incidentally and that donors play a modest role in promoting it. Barriers to indirect learning are related to the institutional context rather than to individual characteristics. Moreover, ‘indirect’ learning seems to flourish best in large projects where donors achieved a position of influence that they can use to evoke reflection upon system malfunctions. In order to enhance learning at all levels donors should thereby present the outcomes of the intervention elaborately (i.e. discuss the outcomes with a large audience), include practical suggestions about post-EIS activities such as monitoring procedures and enforcement options and stimulate the use of their advisory reports to generate organisational memory and ensure a better information dissemination.     

Neutrosophic multi-criteria evaluation of sustainable alternatives for the structure of single-family homes

This paper proposes a methodology for the assessment of the sustainability among three different structural design alternatives for a single-family home. The response associated with each alternative has been measured using 43 indicators considering all stages of the life cycle. A decision-making model is carried out on the basis of a neutrosophic group analytical hierarchy process (NAHP-G) capturing the maximum information in terms of credibility, inconsistency and indetermination. The 9 criteria on which an expert group intervenes are finally evaluated using VIKOR. The results show that non-probabilistic uncertainties influence the weights obtained, with maximum deviations in the criteria between 11.91% and 4.95%, if compared to conventional AHP. From the methodology it is obtained that the technological alternative with non-conventional concrete performs best in sustainable terms. Although the industrialized option has less environmental impact, only the simultaneous consideration of the economic, environmental and social pillars in a project will lead to appropriate sustainable designs.     

环境监测数据分析和监测网设计中SPSS 10.0的应用

SPSS10.0是目前功能齐全、便于应用的优秀统计软件。文章介绍了该软件在环境监测数据分析和监测网设计中的应用。文中简述了该软件的功能及优点，并通过实例，展示其在环境监测数据分析和监测网设计中的应用，这对于优化监测数据分析结果和监测网的设计均有较好的借鉴作用。     

Computer-aided rapid environmental impact assessment

Environmental impact assessment of a project attempts to bring about compatibility between ecology and economics. A computer-aided, quantitative and rapid methodology for environmental impact assessment is presented in this paper. The cost of abatement of deleterious environmental impacts is one of the factors used to identify the best project option from environmental and cost considerations. The methodology is based on the three basic steps of environmental impact assessment vis-à-vis identification, prediction, and evaluation. Several models and predictors for different environmental components are incorporated in the computer program. An evaluation method is presented based on mathematical functions for value function graphs for different aesthetic, environmental, and health risks.     

Application of Microwave Plasma Atomic Emission Spectrometry (MP-AES) for environmental monitoring of industrially contaminated sites in Hyderabad City

Recently introduced microwave plasma-atomic emission spectroscopy (MP-AES) represents yet another and very important addition to the existing array of modern instrumental analytical techniques. In this study, an attempt is made to summarize the performance characteristics of MP-AES and its potential as an analytical tool for environmental studies with some practical examples from Patancheru and Uppal industrial sectors of Hyderabad city. A range of soil, sediment, water reference materials, particulate matter, and real-life samples were chosen to evaluate the performance of this new analytical technique. Analytical wavelengths were selected considering the interference effects of other concomitant elements present in different sample solutions. The detection limits for several elements were found to be in the range from 0.05 to 5 ng/g. The trace metals analyzed in both the sectors followed the topography with more pollution in the low-lying sites. The metal contents were found to be more in ground waters than surface waters. Since a decade, the pollutants are transfered from Patancheru industrial area to Musi River. After polluting Nakkavagu and turning huge tracts of agricultural lands barren besides making people residing along the rivulet impotent and sick, industrialists of Patancheru are shifting the effluents to downstream of Musi River through an 18-km pipeline from Patancheru. Since the effluent undergoes primary treatment at Common Effluent Treatment Plant (CETP) at Patanchru and travels through pipeline and mixes with sewage, the organic effluents will be diluted. But the inorganic pollutants such as heavy and toxic metals tend to accumulate in the environmental segments near and downstreams of Musi River. The data generated by MP-AES of toxic metals like Zn, Cu, and Cr in the ground and surface waters can only be attributed to pollution from Patancheru since no other sources are available to Musi River.     

Beyond distribution and participation: A scoping review to advance a comprehensive environmental justice framework for impact assessment

Concepts of justice are implicit to impact assessment (IA) procedures and policies. A closer examination of the academic literature on environmental justice reveals plural meanings and practices. We present data from a scoping review of the academic literature on IA guided by a trivalent definition of environmental justice encompassing distribution of environmental harms, recognition of diverse ways of knowing, and representation of plural perspectives through democratic procedures. We use this trivalent framework to assess how justice is defined in English language IA journal articles from 2000 to 2019. Findings show an emphasis on distributive and procedural dimensions of justice, with significantly less attention given to issues of recognition and framing. Broad definitions of environmental justice can assist IA scholars in attending to justice-seeking claims across various IA practices and settings, including implications for how IA addresses the concerns of marginalized groups.     

Towards a green and fast production system: Integrating life cycle assessment and value stream mapping for decision making

Integrating environmental commitment to manufacturing concerns seems unavoidable towards a more sustainable conduct. In the contemporary scenario, Value Stream Mapping (VSM) has been bringing new perspectives into companies' economics, improving production performance, whereas Life Cycle Assessment (LCA) has been the most complete tool for environmental assessment. Therefore, the present study aims to propose a model based on the integration of LCA and VSM to improve environmental and manufacturing aspects of organizations, the LCA-VSM model. Possible spots for integration, overlaps between LCA and VSM and potential gains were identified. The LCA-VSM model provides a simple tool for prioritizing action measures to improve the environmental-economic performance, and unlike many existing methods, it encourages continuous improvement instead of a one-off approach. The company where a case study was conducted to test the LCA-VSM model is a manufacturer of tools and painting materials for the civil construction sector. The use of the proposed model guided actions that decreased from 5% to 15% of environmental impacts (across nine impact categories), and reduced both non-value adding (lead time went from 103.26 to 24.01 days) and value adding (cycle time went from 35.7 s to 33.75 s) time. The main contribution of this paper is providing a structured approach to a practical integration of LCA and VSM towards decision making, prioritizing action measures based on the following criteria: environmental preference, economic feasibility, and ease of implementation, aiding more eco-efficient practices.     

我国环境标准样品发展及应用

环境标准样品广泛应用于我国的环境监测活动中,为监测数据的一致性、可比性和准确性提供了重要的技术支撑。该文综述了环境标准样品发展及应用现状,根据国外环境标准样品体系分析了我国环境标准样品体系存在的问题,并对环境监测工作中环境标准样品应用问题提出了相关建议,为环境监测工作者认识和使用环境标准样品提供了指导。     

全国近岸海域水质空间插值算法精度分析

空间插值技术对近海环境数据的分析和表征具有广泛应用价值,但目前针对各类模型适用性和精度比较的研究很少。基于2009年全国近岸海域299个站位的水质监测数据,利用交叉检验法,对3种插值算法13种模型的空间拟合结果进行分析和验证。结果表明,13种模型的模拟值与实测值显著相关(r=0.643~0.750,P0.01,n=299),说明其均适用于近岸海域水质的空间模拟;综合比较模拟结果与实测结果的相关系数、平均误差、平均绝对误差、均方差及偏离程度,排序为IDW(p2)Spline-TensionIDW(p3)IDW(p4)IDW(p1)IDW(p5)IDW(p6)Kriging-GuassianKriging-Spherical,Kriging-CircularKriging-LinearKriging-ExponentialSpline-Regularized,提出IDW(p2)是精度最优的空间插值模型。     

Recycling of petroleum-contaminated sand

The environmental impact of using petroleum-contaminated sand (PCS) as a substitute in asphalt paving mixtures was examined. An appreciable component of PCS is oily sludge, which is found as the dregs in oil storage tanks and is also produced as a result of oil spills on clean sand. The current method for the disposal of oily sludge is land farming. However, this method has not been successful as an oil content of < 1% w/w is required, and difficulty was encountered in reaching this target. The reuse of the sludge in asphalt paving mixtures was therefore considered as an alternative. Standard tests and environmental studies were conducted to establish the integrity of the materials containing the recycled sludge. These included physical and chemical characterization of the sludge itself, and an assessment of the mechanical properties of materials containing 0%, 5%, 22% and 50% oily sludge. The blended mixtures were subjected to special tests, such as Marshall testing and the determination of stability and flow properties. The experimental results indicated that mixtures containing up to 22% oily sludge could meet the necessary criteria for a specific asphalt concrete wearing course or bituminous base course. To maximize the assay from the recycled material, the environmental assessment was restricted to the 50% oily sludge mixture. Leachates associated with this particular mixture were assayed for total organic residue and certain hazardous metal contaminants. The results revealed that the organics were negligible, and the concentrations of the metals were not significant. Thus, no adverse environmental impact should be anticipated from the use of the recycled product. Our research showed that the disposal of oily sludge in asphalt paving mixtures could possibly yield considerable savings per tonne of asphalt concrete, and concurrently minimize any direct impact on the environment.     

An Approach to Multi-criteria Environmental Evaluation with Multiple Weight Assignment

In the domain of environmental protection, multi-criteria evaluation is used in cases where multiple alternatives, on the bases of multiple parameters, need to be evaluated. Depending on the particular goal of investigation, various approaches have been developed and applied. This various multi-criteria approaches differ in parameter weighting method, in data normalization method as well as in the method for assessment of alternatives. According to the applied multi-criteria methodology, the result, i.e., the rank of alternatives may differ to some extent. In this context, parameter weighting bears special significance in multi-criteria evaluation, while the choice of method is crucial for final result. The specificity of parameter weighting process in environment protection is directly related to pronounced interdisciplinary character of this area, as well as the large number of influential parameters. With this in mind, this paper presents an approach to multi-criteria evaluation which—through integration of three specific methods for parameter weighting—allows more flexible and multi-purpose application. Based on the established concept, a software application was developed. Besides automated parameter weighting, it also provides graphical interpretation of results. The developed approach and software have been verified on the case study related to evaluation of environmental loadings at six locations in the city of Novi Sad.     

顺序注射平台-分光光度法测定水中总磷

参照希思迪在线总磷分析仪和荷兰Skalar在线过程分析仪测定水中总磷的方法,对顺序注射平台分析技术进行改进,从而建立了钼酸铵分光光度法测定水中正磷酸盐的快速分析方法,该方法集微功耗、微量试剂消耗于一体。注射平台具有模块化、投入式探头等结构特征,仪器包含3个检测量程,适用于环境监测等领域的实时在线分析。实验选择磷酸蓝的测定吸收波长为880 nm,当总磷质量浓度为0.10~2.00 mg/L时,浓度与吸光度呈线性关系,线性回归方程y=0.970 3x-0.025 3,相关系数为0.999 5,方法的检出限为1.36×10-2mg/L。     

A decision-support system for sustainable urban metabolism in Europe

Urban metabolism components define the energy and material exchanges within a city and, therefore, can provide valuable information on the environmental quality of urban areas. Assessing the potential impact of urban planning alternatives on urban metabolism components (such as energy, water, carbon and pollutants fluxes) can provide a quantitative estimation of their sustainability performance. Urban metabolism impact assessment can, therefore, contribute to the identification of sustainable urban structures with regards, for example, to building types, materials and layout, as well as to location and capacity of transportation and infrastructural developments. In this way, it enables the formulation of planning and policy recommendations to promote efficient use of resources and enhance environmental quality in urban areas.The European FP7 project BRIDGE (sustainaBle uRban plannIng Decision support accountinG for urban mEtabolism) has developed a decision-support system (DSS) that systematically integrates urban metabolism components into impact assessment processes with the aim of accurately quantifying the potential effects of proposed planning interventions. The DSS enables integration of multiple spatial and non-spatial datasets (e.g. physical flows of energy and material with variables of social and economic change) in a systematic manner to obtain spatially defined assessment results and to thus inform planners and decision-makers. This multi-criteria approach also enables incorporation of stakeholders' perceptions in order to prioritise decisive assessment criteria. This paper describes the methodological framework used to develop the DSS and critically examines the results of its practical application in five European cities.     

基于线性回归的环境质量评价普适指数公式

阐述了利用遗传算法优化污染损害指数评价模型中参数时的优点和不足,提出采用普适质数公式对污染损害指数评价模型中参数进行线性优化时,可以大幅简化优化过程,便于实际应用.将适用于大气质量评价的普适指数公式与通过GA优化的评价结果进行比对,证实了该公式在线性优化中的可行性.     

IFTCIP: An Integrated Optimization Model for Environmental Management under Uncertainty

In this study, an interval-fuzzy two-stage chance-constrained integer programming (IFTCIP) method is developed for supporting environmental management under uncertainty. The IFTCIP improves upon the existing interval, fuzzy, and two-stage programming approaches by allowing uncertainties expressed as probability distributions, fuzzy sets, and discrete intervals to be directly incorporated within a general mixed integer linear programming framework. It has advantages in uncertainty reflection, policy investigation, risk assessment, and capacity-expansion analysis in comparison to the other optimization methods. Moreover, it can help examine the risk of violating system constraints and the associated consequences. The developed method is applied to the planning for facility expansion and waste-flow allocation within a municipal solid waste management system. Violations of capacity constraints are allowed under a range of significance levels, which reflects tradeoffs between the system cost and the constraint-violation risk. The results indicate that reasonable solutions for both binary and continuous variables have been generated under different risk levels. They are useful for generating desired decision alternatives with minimized system cost and constraint-violation risk under various environmental, economic, and system-reliability conditions. Generally, willingness to take a higher risk of constraint violation will guarantee a lower system cost; a strong desire to acquire a lower risk will run into a higher system cost.     

Environmental design implementation in Taiwan's industries

This study investigated Taiwan's industries to identify the characteristics of companies most advanced in environmental design. Thirty design principles in five categories were used to define advanced environmental design. The five categories are: use of raw materials, use of energy, design for recyclability, product life cycle assessment, and packaging optimization. We found that of the 30 design principles only eight were applied consistently by Taiwanese manufacturers. Most effort was given to the “use of energy” category. The most advanced environmental design was found at large companies—those with over 2000 employees, 3 billion in capital, and/or 3 billion in annual sales.     

Availability and Assessment of Fixing Additives for The in Situ Remediation of Heavy Metal Contaminated Soils: A Review

The use of low-cost and environmental safety amendments for the in situ immobilization of heavy metals has been investigated as a promising method for contaminated soil remediation. Natural materials and waste products from certain industries with high captive capacity of heavy metals can be obtained and employed. Reduction of extractable metal concentration and phytotoxicity could be evaluated and demonstrated by the feasibility of various amendments in fixing remediation. In this review, an extensive list of references has been compiled to provide a summary of information on a wide range of potentially amendment resources, including organic, inorganic and combined organic-inorganic materials. The assessment based on the economic efficiency and environmental risks brought forth the potential application values and future development directions of this method on solving the soil contamination.     

Green chemistry

A grand challenge facing government, industry, and academia in the relationship of our technological society to the environment is reinventing the use of materials. To address this challenge, collaboration from an interdisciplinary group of stakeholders will be necessary. Traditionally, the approach to risk management of materials and chemicals has been through inerventions intended to reduce exposure to materials that are hazardous to health and the environment. In 1990, the Pollution Prevention Act encouraged a new tact-elimination of hazards at the source. An emerging approach to this grand challenge seeks to embed the diverse set of environmental perspectives and interests in the everyday practice of the people most responsible for using and creating new materials—chemists. The approach, which has come to be known as Green Chemistry, intends to eliminate intrinsic hazard itself, rather than focusing on reducing risk by minimizing exposure. This chapter addresses the representation of downstream environmental stakeholder interests in the upstream everyday practice that is reinventing chemistry and its material inputs, products, and waste as described in the “12 Principles of Green Chemistry”.     

Empowering impact assessments knowledge and international research collaboration - A bibliometric analysis of Environmental Impact Assessment Review journal

Innovation, knowledge exchange and collaboration are fundamental in environmental studies. Impact assessments represent a key tool in identifying and predicting the environmental consequences of a project. The journal Environmental Impact Assessment Review started promoting research discussing different issues or methods in the field of impact assessments and environmental management since 1980. By analyzing 1664 articles published within the journal between 1980 and 2018 by 2935 authors, affiliated to institutions from 75 countries, this study aims to provide a better understanding of the environmental assessment research trends. Bibliometric indicators such as keywords or country of affiliation were analyzed through a network methodological approach, including co-occurrence analysis, centrality metrics and multiple correspondence analysis. The international collaboration and productivity maps bring a novel overview to this type of analysis and reveal new perspectives for thrived cooperation on environmental assessments research. The results illustrate the most common research topics through a conceptual structure map and a keywords co-occurrence graph with a temporal overlay, which allows observing their evolution over the years. Furthermore, this work tries to explain the political, economic, social and technological factors that influence the tendencies in environmental assessments research and scientific cooperation, providing future insights for environmental scientific priorities.