Report: citizen participation as a part of integrated solid waste management: Porto Alegre case.

This study presents the effects of citizen participation on integrated solid waste management. Porto Alegre was chosen as the area of study since its system is a good example for developing countries, based on the partnership between local government and the former scavengers' association that implements selective collection in the city. A life-cycle approach was used to estimate environmental loadings and economic costs based on solid waste generation, and a survey assessment tool was used to analyse social aspects. The results showed a decrease in environmental and economic impacts in the current situation, allowing Porto Alegre to have one of the most affordable integrated solid waste management systems in Brazil. The survey assessment pointed out that public campaign changed the perceptions and practices of most of Porto Alegre's citizens regarding solid waste management. On the other hand, it also pointed out that citizens need more education to increase their participation. Therefore, more research is needed to increase cooperation among all stakeholders, improve citizen participation, and consequently, further decrease the environmental impacts and economic costs.     

Effective dialogue: Enhanced public engagement as a legitimising tool for municipal waste management decision-making

The complexity of municipal waste management decision-making has increased in recent years, accompanied by growing scrutiny from stakeholders, including local communities. This complexity reflects a socio-technical framing of the risks and social impacts associated with selecting technologies and sites for waste treatment and disposal facilities. Consequently there is growing pressure on local authorities for stakeholders (including communities) to be given an early opportunity to shape local waste policy in order to encourage swift planning, development and acceptance of the technologies needed to meet statutory targets to divert waste from landfill. This paper presents findings from a research project that explored the use of analytical–deliberative processes as a legitimising tool for waste management decision-making. Adopting a mixed methods approach, the study revealed that communicating the practical benefits of more inclusive forms of engagement is proving difficult even though planning and policy delays are hindering development and implementation of waste management infrastructure. Adopting analytical–deliberative processes at a more strategic level will require local authorities and practitioners to demonstrate how expert-citizen deliberations may foster progress in resolving controversial issues, through change in individuals, communities and institutions. The findings suggest that a significant shift in culture will be necessary for local authorities to realise the potential of more inclusive decision processes. This calls for political actors and civic society to collaborate in institutionalising public involvement in both strategic and local planning structures.     

Forecasting municipal solid waste generation in a fast-growing urban region with system dynamics modeling

Both planning and design of municipal solid waste management systems require accurate prediction of solid waste generation. Yet achieving the anticipated prediction accuracy with regard to the generation trends facing many fast-growing regions is quite challenging. The lack of complete historical records of solid waste quantity and quality due to insufficient budget and unavailable management capacity has resulted in a situation that makes the long-term system planning and/or short-term expansion programs intangible. To effectively handle these problems based on limited data samples, a new analytical approach capable of addressing socioeconomic and environmental situations must be developed and applied for fulfilling the prediction analysis of solid waste generation with reasonable accuracy. This study presents a new approach--system dynamics modeling--for the prediction of solid waste generation in a fast-growing urban area based on a set of limited samples. To address the impact on sustainable development city wide, the practical implementation was assessed by a case study in the city of San Antonio, Texas (USA). This area is becoming one of the fastest-growing regions in North America due to the economic impact of the North American Free Trade Agreement (NAFTA). The analysis presents various trends of solid waste generation associated with five different solid waste generation models using a system dynamics simulation tool--Stella. Research findings clearly indicate that such a new forecasting approach may cover a variety of possible causative models and track inevitable uncertainties down when traditional statistical least-squares regression methods are unable to handle such issues.     

SOLID WASTE MANAGEMENT IN TEHRAN

The main objective of this paper is to analyse the present status of solid waste management in Tehran, and subsequently, to draw up a policy regarding their generation, collection, on-site handling, storage, processing, recycling, transportation and safe disposal. Through a detailed survey, all functional elements of the present solid waste management system in Tehran were studied. Factors affecting the important management issues in the operation of Tehran's solid waste management system are discussed. Key design data and other useful information selected from a variety of reliable sources are presented. The practical aspects associated with solid waste management systems, such as organizational structure, financing, operations, equipment management, personnel, reporting, cost accounting and budgeting, ordinances and guidelines, and public communications are described.     

Resolving public conflict in site selection process-a risk communication approach

In Japan, conflicts regarding the siting of waste disposal facilities occur frequently. In particular, siting of incinerators and landfills has become increasingly difficult because the public is highly concerned about the dioxin issues. Inefficient siting of waste disposal facilities causes several social problems, such as the shortage of waste treatment and disposal facilities, the rising of waste management costs and an increase in the consumption of resources. While dealing with a similar situation, the Chemical Society of Japan adopted a risk communication technique successfully. Hence, the pragmatic use of a risk communication technique is proposed to avoid conflicts and for a smooth information exchange to seek cooperation in waste management. In order to achieve this, a study was conducted to resolve conflicts between residents and the municipality for the selection of site for a solid waste treatment and disposal facility. This study aims to discuss the subject of risk communication for the waste disposal system in Japan. This study is performed through personal interviews and a questionnaire covering opposing parties in the town. As a result of the survey, a risk communication approach for a waste treatment and disposal system is presented in the paper addressing issues such as building of social trust, pragmatic use of the communication process, installation of credible information sources, and environmental education and awareness.     

Application of system dynamics modeling for evaluation of different recycling scenarios in Singapore

The influence of socioeconomic factors, such as population and rapid economic growth, and the change of consumption and living patterns make waste management in Singapore, a complex issue. Due to limited land and resources, the solid waste management scheme requires a comprehensive approach. Therefore, system dynamics (SD) modeling was applied to assess alternative strategies for solid waste management by interconnecting landfill capacity and recycling efficiency with reference to the projection on waste generation. Nine different scenarios were investigated to identify the best approach to maintain environmental sustainability without inhibiting the economic growth. Four subsystems (i.e., population, economy, waste recycling, and waste disposal) have been incorporated into the SD model to broaden the effectiveness of the waste management system. Research findings revealed that a high economic pattern and a high recycling rate are recommended to satisfy the requirements for economic growth and environmental sustainability while extending landfill capacity for waste disposal. Even though the balance of expenditure could be increased by the high recycling rate, it meets the need for long-term incineration and landfill planning.     

Review of LCA studies of solid waste management systems – Part I: Lessons learned and perspectives

The continuously increasing solid waste generation worldwide calls for management strategies that integrate concerns for environmental sustainability. By quantifying environmental impacts of systems, life cycle assessment (LCA) is a tool, which can contribute to answer that call. But how, where and to which extent has it been applied to solid waste management systems (SWMSs) until now, and which lessons can be learnt from the findings of these LCA applications? To address these questions, we performed a critical review of 222 published LCA studies of SWMS. We first analysed the geographic distribution and found that the published studies have primarily been concentrated in Europe with little application in developing countries. In terms of technological coverage, they have largely overlooked application of LCA to waste prevention activities and to relevant waste types apart from household waste, e.g. construction and demolition waste. Waste management practitioners are thus encouraged to abridge these gaps in future applications of LCA. In addition to this contextual analysis, we also evaluated the findings of selected studies of good quality and found that there is little agreement in the conclusions among them. The strong dependence of each SWMS on local conditions, such as waste composition or energy system, prevents a meaningful generalisation of the LCA results as we find it in the waste hierarchy. We therefore recommend stakeholders in solid waste management to regard LCA as a tool, which, by its ability of capturing the local specific conditions in the modelling of environmental impacts and benefits of a SWMS, allows identifying critical problems and proposing improvement options adapted to the local specificities.     

A decision support system for the operational planning of solid waste collection

This study presents the conception, modeling, and implementation of a decision support system applied to the operational planning of solid waste collection systems, called SCOLDSS. The main functionality of the system is the generation of alternatives to the decision processes concerning: (a) the allocation of separate collection vehicles, as well as the determination of their routes and (b) the determination of the daily amount of solid waste to be sent to each sorting unit, in order to avoid waste of labor force and to reduce the amount of waste sent to the landfills. To develop the computer system, a combination of quantitative techniques was used, such as: simulation of discrete events and algorithms/heuristics for vehicle allocation and routing. The system was developed using the Borland Delphi environment and the commercial software Arena to carry out the simulations. We also present a computational study with real-life data from the solid waste collection in Porto Alegre, Brazil, in which we show that the results provided by the computational system outperform the operation planning currently adopted.     

Application of the WAMED model to landfilling

A cost methodology is proposed for evaluating the ecological-economic efficiency of a municipal solid waste management scheme based on the recommendations of cost-benefit analysis and the full-cost accounting methodology for municipal solid waste management. The methodology employs the previously introduced waste managements’ efficient decision (WAMED) model and the company statistical business tool for environmental recovery (COSTBUSTER) indicator. A case study presents the practical application of the proposed cost-benefit analysis-based theory to the landfilling concept currently applied in Kalmar, Sweden. It is concluded that the presented provisions for evaluation of the ecological-economic efficiency of a municipal solid waste management scheme reflect a novel integrated approach to solving the problem of simultaneously decreasing the negative impacts of municipal solid waste on the environment and the health of the population while providing an information support tool for decision making in municipal solid waste management at regional and municipal levels to improve small-and medium-sized company competitiveness in particular.     

An overview of municipal solid waste management in Inner Mongolia Autonomous Region,China

Rapid industrialization and urbanization in developing countries have created serious problems in municipal solid waste (MSW) management. New case studies can shed light on these problems and point the way to potential solutions for improving the overall eco-efficiency of MSW management. This paper employs a case study approach, analyzing MSW management in Inner Mongolia. This study encompasses all aspects of MSW management, including collection, separation, recycling, and disposal. Problems and challenges are identified through our analysis, and recommendations are raised by considering the local realities. Our main findings are: (1) while large cities have already established a solid foundation for MSW management, small- and medium-sized cities deserve more attention; (2) MSW in rural areas is even worse than urban areas; (3) enforcement of MSW regulations is ineffective and needs improvement; (4) lack of funds, R&D efforts and advanced technologies have impeded sustainable MSW management; (5) lack of coordination and communication among different stakeholders further damages the efforts for improvement of MSW management. Therefore, integrated efforts that combine the above concerns should be initiated so that the overall effectiveness and efficiency of MSW management can be improved.     

Solid waste treatment opportunities in the Palestinian authority areas

Municipal services in the Palestinian Authority (PA) areas, including the West Bank and Gaza Strip (WBGS), are facing serious difficulties that have been intensified following the outbreak of the Palestinian uprising in late September 2000. The solid waste management services, being the most essential services provided by the municipalities and village councils, are mostly affected by the ongoing harsh situation and hence proper solutions that take into account the actual amount of generated municipal solid waste and its composition is a pre-requisite for planning proper treatment. Hence, a study was carried out to identify the actual status of solid waste in eight West Bank districts. A social survey was also conducted to collect information concerning the level of public awareness among communities surveyed to the perception of solid waste recycling and reuse. The results of the survey conducted in 2001–2002 were later reviewed during July–October 2008 to assess if the trend of domestic solid waste generation had changed. Based on the survey and post-assessment, it is found that political and economic conditions have both significantly impacted the trend of generated municipal solid waste and since no improvements in either condition are forthcoming, it is concluded that survey results could be used in a planning study. A possible handling of the generated wastes may entail transferring the recyclable waste to Israeli recycling industries, and in constructing three composting plants in different accessible locations in the West Bank.     

Municipal solid waste management in Africa: strategies and livelihoods in Yaoundé, Cameroon

This paper provides an overview of the state of municipal solid waste (MSW) management in the capital of Cameroon, Yaoundé, and suggests some possible solutions for its improvement. The institutional, financial, and physical aspects of MSW management, as well as the livelihoods of the population, were analyzed. Our study revealed that distances and lack of infrastructure have a major impact on waste collection. Garbage bins are systematically mentioned as the primary infrastructure needed by the population in all quarters, whether it be a high or low standard community. The construction of transfer stations and the installation of garbage bins are suggested as a solution to reduce distances between households and garbage bins, thus improving waste collection vehicle accessibility. Transfer stations and garbage bins would enable the official waste collection company to expand its range of services and significantly improve waste collection rates. Several transfer stations have already been set up by non-governmental organizations (NGOs) and community-based organizations (CBOs), but they require technical, institutional and funding support. Research is needed on the quality and safety of community-made compost, as well as on soil fertility in urban and peri-urban areas. Most of the stakeholders, municipalities, the official waste collection company and households acknowledge the need for better monitoring and regulation of MSW management. The urban community of Yaoundé also needs to maintain its support of MSW management and promote the sustainability of NGOs and CBOs operating in underserved areas not yet covered by adequate infrastructures. A major opportunity for implementation of such waste policy is the heavily indebted poor countries (HIPC) program dedicated to urban planning and good governance.     

Neighbourhood-based waste management: a solution for solid waste problems in Jakarta, Indonesia

Municipal solid waste management in the capital city of Indonesia, Jakarta, is examined from a point of view of researchers and waste management practitioners. Major impediments to waste management in Jakarta include non-involvement of stakeholders in planning and decision-making, unskilled staff undertaking the duty, the absence of long-term waste management strategies, and weak coordination between authorities and neighbourhood association workers who undertake primary collection. It was revealed that lack of resources is seen as the least important of all impediments. The success of managing solid waste in Jakarta cannot be separated from the presence and the role of a neighbourhood association, which performs waste collection on a daily basis as well as keeping their respective areas clean by employing their own waste service workers. A neighbourhood-based waste management strategy is a promising solution for Jakarta, because it is more applicable and suitable for Jakarta's context compared to community-based waste management. The performance of this approach is examined and the improvement for wider adoption is discussed for a long-term solution.     

Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system

This paper deals with a system of integration of Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system. RFID, GPS, GPRS and GIS along with camera technologies have been integrated and developed the bin and truck intelligent monitoring system. A new kind of integrated theoretical framework, hardware architecture and interface algorithm has been introduced between the technologies for the successful implementation of the proposed system. In this system, bin and truck database have been developed such a way that the information of bin and truck ID, date and time of waste collection, bin status, amount of waste and bin and truck GPS coordinates etc. are complied and stored for monitoring and management activities. The results showed that the real-time image processing, histogram analysis, waste estimation and other bin information have been displayed in the GUI of the monitoring system. The real-time test and experimental results showed that the performance of the developed system was stable and satisfied the monitoring system with high practicability and validity.     

Decision support models for solid waste management: Review and game-theoretic approaches

This paper surveys decision support models that are commonly used in the solid waste management area. Most models are mainly developed within three decision support frameworks, which are the life-cycle assessment, the cost–benefit analysis and the multi-criteria decision-making. These frameworks are reviewed and their strengths and weaknesses as well as their critical issues are analyzed, while their possible combinations and extensions are also discussed. Furthermore, the paper presents how cooperative and non-cooperative game-theoretic approaches can be used for the purpose of modeling and analyzing decision-making in situations with multiple stakeholders. Specifically, since a waste management model is sustainable when considering not only environmental and economic but also social aspects, the waste management bargaining game is introduced as a specific decision support framework in which future models can be developed.     

Evaluation of municipal solid waste flow in the Bandung metropolitan area, Indonesia

This article covers partial results for research which was carried out to determine the effectiveness of municipal solid waste (MSW) recycling in Bandung metropolitan urban areas. It focuses on the results of waste flow analysis as basic information in developing better MSW management systems, especially in applying the reduce, reuse, recycle (3Rs) concept. The dependence upon final disposal sites in MSW management and the difficulties in finding disposal sites have resulted in interest in the 3Rs concept. In this research, the determination of waste compositions and the potential of recycling were evaluated based on data from interviews with householders, members of the nonhousehold sector, and recycling actors and on measurement. The informal sector activities observed were mainly from handcart crews, mobile scavengers, transfer point scavengers, final disposal scavengers, waste traders, and recycling business people at several locations in Bandung and Cimahi cities. The estimated waste recycling and composting by stakeholders has not yet achieved 10% (wet weight) of the total waste generated. As in other major cities in developing countries, the informal sectors hold an important role in the recovery of usable materials from waste. However, inorganic waste recycling activities from this sector have not even reached 8% (wet weight) of the total waste generated.     

Planning of disposal sites in Dar es Salaam,Tanzania—A decision support system approach

A system is developed aiming at supporting the planners in several aspects of solid waste management in developing countries. The system is tailored especially to planning of disposal sites in Dar es Salaam, Tanzania based on a decision support system framework. Emphasis was placed on: applicability for users without particular computer knowledge, a simple and comprehensible system for solid waste planners to use, stressing environmental impact, and introduction of subjective judgements. As an important element of problem formulation and problem solving, the involved decision processes are elaborated. The entire system is implemented within a Lotus 1-2-3 spreadsheet environment. The developed model illustrates that it is possible to include and emphasize several features that are lacking in many existing commercial computerized models.     

Swedish recovered wood waste: linking regulation and contamination

In Sweden, large amounts of wood waste are generated annually from construction and demolition activities, but also from other discarded products such as packaging and furniture. A large share of this waste is today recovered and used for heat production. However, previous research has found that recovered wood waste (RWW) contains hazardous substances, which has significant implications for the environmental performance of recycling. Improved sorting is often suggested as a proper strategy to decrease such implications. In this study, we aim to analyse the impacts of waste regulation on the contamination of RWW. The occurrence of industrial preservative-treated wood, which contains several hazardous substances, was used as an indicator for contamination. First the management of RWW during 1995-2004 was studied through interviews with involved actors. We then determined the occurrence of industrial preservative-treated wood in RWW for that time period for each supplier (actor). From the results, it can be concluded that a substantially less contaminated RWW today relies on extensive source separation. The good news is that some actors, despite several obstacles for such upstream efforts, have already today proved capable of achieving relatively efficient separation. In most cases, however, the existing waste regulation has not succeeded in establishing strong enough incentives for less contaminated waste in general, nor for extensive source separation in particular. One important factor for this outcome is that the current market forces encourage involved actors to practice weak quality requirements and to rely on end-of-pipe solutions, rather than put pressure for improvements on upstream actors. Another important reason is that there is a lack of communication and oversight of existing waste regulations. Without such steering mechanisms, the inherent pressure from regulations becomes neutralized.