中国废纸回收利用行业发展路径及政策探讨

2012和2013年的废纸市场让很多企业一筹莫展,全球经济不振,国内需求不足,产能过剩,直接影响了造纸行业的生产和销售,作为原料供应商的废纸回收利用行业,必然受到连带影响,整个产业进入低迷阶段.除了外部经济环境的影响,行业内部应该如何调整,产业政策又该怎样引导行业健康发展,将是未来需要持续探讨的课题.     

中国废纸回收系统的现状及展望

分析了我国废纸回收行业的发展现状及存在问题,提出了提高我国废纸回收和利用率的具体措施,并以江苏省为例,介绍了其建设废纸回收体系的具体做法.     

我国纸包装废物产生特性和回收状况研究

纸包装被广泛应用于各个领域,消费量巨大,废物的产生量也巨大,但我国对其产生特性和回收体系研究较少。首先分析纸包装的生产量、消费量、废物产生量和回收量,指出我国纸包装废物回收率,远高于废纸的统计回收率;其次,综合分析纸包装废物的回收特性和回收体系状况,指出纸包装废物主要流向和关键环节;然后,对纸包装消费趋势进行预测,最后,提出纸包装废物回收存在的问题和对策措施。     

Triboelectrostatic separation for granular plastic waste recycling: A review

The world’s plastic consumption has increased incredibly in recent decades, generating more and more plastic waste, which makes it a great public concern. Recycling is the best treatment for plastic waste since it cannot only reduce the waste but also reduce the consumption of oil for producing new virgin plastic. Mechanical recycling is recommended for plastic waste to avoid the loss of its virgin value. As a mechanical separation technology, triboelectrostatic separation utilizes the difference between surface properties of different materials to get them oppositely charged, deflected in the electric field and separately collected. It has advantages such as high efficiency, low cost, no concern of water disposal or secondary pollution and a relatively wide processing range of particle size especially suitable for the granular plastic waste. The process of triboelectrostatic separation for plastic waste is reviewed in this paper. Different devices have been developed and proven to be effective for separation of plastic waste. The influence factors are also discussed. It can be concluded that the triboelectrostatic separation of plastic waste is a promising technology. However, more research is required before it can be widely applied in industry.     

Mineral wool waste in Europe: a review of mineral wool waste quantity,quality, and current recycling methods

The construction and demolition (C&D) industry has been identified as a major source of waste. European Union legislation states that, by 2020, 70 % of C&D waste must be prepared for reuse, recycled or recovered. European Union member states must increase their C&D waste recycling percentages in order to meet this binding target. Utilization of mineral wool waste, often considered unrecyclable, could improve the recycling percentage of C&D waste. In this article, mineral wool production and waste volumes are estimated based on information from the Eurostat database. A literature survey is conducted to collect information about mineral wool material properties, current recycling methods, and barriers to recycling of mineral wool, and suitable methods for separating mineral wool from C&D waste streams and the economic viability of mineral wool recycling are discussed. It is noted that accurate estimation of mineral wool waste volumes is problematic due to the fragmented nature of available data. Based on the literature review, current methods for recycling mineral wool waste include utilization of mineral wool waste as a raw material in various products. Barriers to recycling include economic questions and issues related to the purity and health effects of mineral wool waste. Material properties of mineral wool waste, such as fire resistance, could provide improved properties in products utilizing mineral wool waste as a raw material.     

建筑垃圾循环利用实践

建筑垃圾的循环利用是今后建筑垃圾处理的必经之路。在对国内外建筑垃圾循环利用的相关政策、法律法规及回收现状进行比较分析的基础上,对目前建筑垃圾循环利用的案例进行调查整理,总结出建筑垃圾循环利用的一般过程;并在对目前建筑垃圾循环利用的方法进行研究后,介绍了一种先进实用的建筑垃圾循环利用方法;最后对我国建筑垃圾循环利用存在的问题进行剖析并提出解决问题的建议,以期对我国建筑垃圾循环利用的发展有所裨益。     

Solid waste management practices and review of recovery and recycling operations in Turkey

This paper provides a general overview of solid waste data and management practices employed in Turkey during the last decade. Municipal solid waste statistics and management practices including waste recovery and recycling initiatives have been evaluated. Detailed data on solid waste management practices including collection, recovery and disposal, together with the results of cost analyses, have been presented. Based on these evaluations basic cost estimations on collection and sorting of recyclable solid waste in Turkey have been provided. The results indicate that the household solid waste generation in Turkey, per capita, is around 0.6 kg/year, whereas municipal solid waste generation is close to 1 kg/year. The major constituents of municipal solid waste are organic in nature and approximately 1/4 of municipal solid waste is recyclable. Separate collection programmes for recyclable household waste by more than 60 municipalities, continuing in excess of 3 years, demonstrate solid evidence for public acceptance and continuing support from the citizens. Opinion polls indicate that more than 80% of the population in the project regions is ready and willing to participate in separate collection programmes. The analysis of output data of the Material Recovery Facilities shows that, although paper, including cardboard, is the main constituent, the composition of recyclable waste varies strongly by the source or the type of collection point.     

Informal electronic waste recycling: a sector review with special focus on China

Informal recycling is a new and expanding low cost recycling practice in managing Waste Electrical and Electronic Equipment (WEEE or e-waste). It occurs in many developing countries, including China, where current gaps in environmental management, high demand for second-hand electronic appliances and the norm of selling e-waste to individual collectors encourage the growth of a strong informal recycling sector. This paper gathers information on informal e-waste management, takes a look at its particular manifestations in China and identifies some of the main difficulties of the current Chinese approach. Informal e-waste recycling is not only associated with serious environmental and health impacts, but also the supply deficiency of formal recyclers and the safety problems of remanufactured electronic products. Experiences already show that simply prohibiting or competing with the informal collectors and informal recyclers is not an effective solution. New formal e-waste recycling systems should take existing informal sectors into account, and more policies need to be made to improve recycling rates, working conditions and the efficiency of involved informal players. A key issue for China’s e-waste management is how to set up incentives for informal recyclers so as to reduce improper recycling activities and to divert more e-waste flow into the formal recycling sector.     

Sustainability of recycling plastic waste as fibers for concrete: a review

Journal of Material Cycles and Waste Management - Plastic waste management is of global concern while construction industry keeps searching for innovations to become more sustainable. In this...     

Comparisons of four categories of waste recycling in China's paper industry based on physical input-output life-cycle assessment model

Waste recycling for paper production is an important component of waste management. This study constructs a physical input-output life-cycle assessment (PIO-LCA) model. The PIO-LCA model is used to investigate environmental impacts of four categories of waste recycling in China’s paper industry: crop straws, bagasse, textile wastes and scrap paper. Crop straw recycling and wood utilization for paper production have small total intensity of environmental impacts. Moreover, environmental impacts reduction of crop straw recycling and wood utilization benefits the most from technology development. Thus, using crop straws and wood (including wood wastes) for paper production should be promoted. Technology development has small effects on environmental impacts reduction of bagasse recycling, textile waste recycling and scrap paper recycling. In addition, bagasse recycling and textile waste recycling have big total intensity of environmental impacts. Thus, the development of bagasse recycling and textile waste recycling should be properly limited. Other pathways for reusing bagasse and textile wastes should be explored and evaluated. Moreover, imports of scrap paper should be encouraged to reduce large indirect impacts of scrap paper recycling on domestic environment.     

A dynamic optimization model for solid waste recycling

Recycling is an important part of waste management (that includes different kinds of issues: environmental, technological, economic, legislative, social, etc.). Differently from many works in literature, this paper is focused on recycling management and on the dynamic optimization of materials collection. The developed dynamic decision model is characterized by state variables, corresponding to the quantity of waste in each bin per each day, and control variables determining the quantity of material that is collected in the area each day and the routes for collecting vehicles. The objective function minimizes the sum of costs minus benefits. The developed decision model is integrated in a GIS-based Decision Support System (DSS). A case study related to the Cogoleto municipality is presented to show the effectiveness of the proposed model. From optimal results, it has been found that the net benefits of the optimized collection are about 2.5 times greater than the estimated current policy.     

废旧塑料回收利用现状及问题

塑料制品在给人类带来便利的同时,也带来了极大的负效应,随着塑料使用量的大幅增加,废旧塑料由于难以自然降解,所造成的环境污染日趋严重。回收利用为处理废旧塑料垃圾开辟了减量化、无害化、资源化的道路。目前各国对废旧塑料回收利用都非常重视,投入大量人力、物力,乃至通过立法,开发各种废旧塑料回收利用的关键技术。综述了废旧塑料的回收和利用现状,以及国内近些年来废旧塑料处理和回收利用技术的研究进展及其发展趋势。     

含砷废料资源化利用与无害化处置现状

砷及其砷化物有剧毒,若处置不当,通过土壤、大气和水介质等各种途径进入环境,严重影响人类的生存环境。因此对含砷废料资源化利用和无害化处理一直是环保工作重要研究课题。针对含砷废料来源、稳定性评价方法和资源化综合利用技术进行分析,在此基础上提出含砷废料资源化利用和无害化处置建议。要从根本上建立健全相应的法律法规、标准体系,建立管理网络,培育市场运行体系,强化技术支撑体系,大力推广减量化、资源化、无害化的高新实用技术。     

Trends in waste plastics and recycling

Zero emission is an ambitious project aimed at the conversion of the conventional top-down or one-directional flow type production systems of modern society to those of a recycling type. The basic idea underlying this project is to understand in detail the material flow mechanism in a particular segment of society and to evaluate the transformability of the hitherto one-directional types of process into recycling types. The authors, members of the Zero-Emission Research Group of Japan, are investigating the material flow of plastics in Japan. The present work describes the features of this project, as well as the results obtained so far. Received: May 28, 1998 / Accepted: October 16, 1998     

Analysis of the recycling system for aluminum cans,focusing on collection,transportation, and the intermediate processing methods

In this article, the systems for the collection and intermediate processing of used beverage cans (UBCs) are compared and analyzed, focusing on the time taken and the cost of processing, the energy consumption, and the emissions of CO₂, SO _x , and NO _x , during the process. We found that cases where the UBCs were crushed in the discharging process gave better results, and how the UBCs were collected was the most important factor. It was more desirable to treat UBCs in one place than in two places. When the transportation distance was longer, the pressed form of UBCs was more convenient. When the transportation distance was short, the original form, the crushed form, and the shredded form of UBCs were all suitable. That is, the contribution of the transportation process to the evaluation was large when the transport distance was long, and the contribution of the treatment process was large when the transport distance was short.     

Quantification of greenhouse gas emissions from waste management processes for municipalities--a comparative review focusing on Africa

The amount of greenhouse gases (GHG) emitted due to waste management in the cities of developing countries is predicted to rise considerably in the near future; however, these countries have a series of problems in accounting and reporting these gases. Some of these problems are related to the status quo of waste management in the developing world and some to the lack of a coherent framework for accounting and reporting of greenhouse gases from waste at municipal level. This review summarizes and compares GHG emissions from individual waste management processes which make up a municipal waste management system, with an emphasis on developing countries and, in particular, Africa. It should be seen as a first step towards developing a more holistic GHG accounting model for municipalities. The comparison between these emissions from developed and developing countries at process level, reveals that there is agreement on the magnitude of the emissions expected from each process (generation of waste, collection and transport, disposal and recycling). The highest GHG savings are achieved through recycling, and these savings would be even higher in developing countries which rely on coal for energy production (e.g. South Africa, India and China) and where non-motorized collection and transport is used. The highest emissions are due to the methane released by dumpsites and landfills, and these emissions are predicted to increase significantly, unless more of the methane is captured and either flared or used for energy generation. The clean development mechanism (CDM) projects implemented in the developing world have made some progress in this field; however, African countries lag behind.     

上海报废信息卡回收及资源化利用探讨

信息产业不断发展,促使各类信息卡不断涌现,相关报废信息卡的回收和资源化利用已成为资源综合利用的重要课题。围绕上海市废旧信息卡的产生量与回收情况,就报废信息卡回收可借鉴的经验与资源利用技术问题进行了探讨。为其他地区开展相关工作提供参考。     

大连实施垃圾分类回收积极推进垃圾资源再生利用产业化

大连在全国率先创建新型垃圾分类回收体系,实现废旧物资回收与垃圾分类回收在同一个垃圾分类回收站内完成,有利于各类废物资源集中收集、分类回收、资源化利用或处理,彻底改革了我国传统落后的废旧物资回收与垃圾收集处理方式,为废旧物资与垃圾资源再生与循环利用提供了保障条件,也为垃圾处理产业化奠定了坚实的基础。