Lead(II) and cadmium(II) removal from aqueous solution using processed walnut shell: kinetic and equilibrium study

The biosorption potential of processed walnut shell for Pb(II) and Cd(II) ions from aqueous solutions was explored. The effects of pH, contact time, initial ion concentration, and amount of dried adsorbent were studied in batch experiments. The maximum adsorption was achieved within the pH range 4.0–6.0. The equilibrium data were well fitted by the Langmuir isotherm model. The maximum monolayer adsorption capacities were found to be 32?g?kg^?1 and 11.6?g?kg^?1 for Pb(II) and Cd(II) ions, respectively. Kinetic data were best described by the pseudo-second-order model. The structural features of the adsorbent were characterized by Fourier transform infrared spectroscopy, which confirmed the involvement of hydroxyl (–OH), carboxyl (–COO^–), and carbonyl (C=O) groups in metal sorption. This readily available adsorbent is efficient in the uptake of Pb(II) and Cd(II) ions from an aqueous solution and could be used for the treatment of wastewater streams bearing these metal ions.     

Removal of cadmium(II), lead(II), and chromium(VI) ions from aqueous solution using clay

Removal of cadmium(II), lead(II), and chromium(VI) from aqueous solution using clay, a naturally occurring low-cost adsorbent, under various conditions, such as contact time, initial concentration, temperature, and pH has been investigated. The sorption of these metals follows both Langmuir and Freundlich adsorption isotherms. The magnitude of Langmuir and Freundlich constants at 30°C for cadmium, lead, and chromium indicate good adsorption capacity. The kinetic rate constants (K _ad) indicate that the adsorption follows first order. The thermodynamic parameters: free energy change (ΔG ^o), enthalpy change (ΔH ^o), and entropy change (ΔS ^o) show that adsorption is an endothermic process and that adsorption is favored at high temperature. The results reveal that clay is a good adsorbent for the removal of these metals from wastewater.     

Electrochemical hydride generation of tin(II) and its determination by electrothermal atomic absorption spectrometry with in situ trapping in the graphite tube atomizer

An electrolytic hydride generation system for the determination of tin(II) by means of batch electrochemical hydride generation-electrothermal atomic absorption spectrometry (EcHG-ETAAS) with in situ trapping in a graphite tube atomizer is described. The effects of four permanent chemical modifiers – palladium, tungsten, iridium, and platinum – for graphite tube treatment on analyte absorbance and the effects of four cathode materials, i.e., Pb, Sn, Pb–Sn alloy, and glassy carbon, are checked. Three electrolytes, i.e., nitric acid, sulfuric acid, and hydrochloric acid, are examined as catholyte solutions. The influence of several parameters on EcHG is investigated using multivariate and univariate methods. Interferences of some concomitant ions are evaluated. The calibration curve is linear from 1 to 200?µg?L^?1, with a detection limit of 0.8?µg?L^?1 and a relative standard deviation of 6.2% (n?=?3) for 100?µg?L^?1 Sn(II). The proposed method was successfully applied in the analysis of real environmental water samples and reference materials, and good spiked recoveries over the range of 93.1–115% were obtained. The proposed technique provides a means for developing hydride generation of other elements.     

Suitability of various chemically prepared activated carbons for the removal of copper(II) ions

Studies on the suitability of various chemically prepared activated carbons (CPACs) like straw carbon (SC), sawdust carbon (SDC), dates nut carbon (DNC) and commercial activated carbon (CAC) for the removal of copper(II) ions by adsorption from simulated wastewater have been carried out under batch mode at 30?±?1°C and the results are compared. The percentage removal of Cu(II) ions increased with a decrease in initial concentration, particle size and added electrolytes (ionic strength) and increased with an increase in contact time, dose of adsorbent and initial pH of the solution. The adsorption data were fitted with the Langmuir isotherm. The applicability of the first order kinetic equation viz. Lagergren equation was tested by correlation analysis. The adsorption process is concluded to be a spontaneous, first order reaction, occurring with increased randomness at the solid–liquid interface. Studies on the desorption of Cu²⁺-loaded activated carbons (ACs) were carried out with nitric acid (0.2–1?N). The possibility of reuse of the regenerated ACs in cycle (in cue-one after another) was tested. SC was found to be a suitable adsorbent alternative to CAC among CPACs for the removal of metal ions, in general, and Cu²⁺ ions, in particular.     

Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

Studies of thermodynamics of phosphomidon on fly ash

Adsorption thermodynamic studies of phosphomidon on fly ash at 25° and 50°C have been analysed as adsorption isotherms, Freundlich equations, K_d values and various other thermodynamic parameters. These data were in close agreement with Freundlich isotherms and yield ‘S’ type isotherms at both the temperatures. Thermodynamic constants (K_o) and standard free energy (ΔG°), enthalpy (ΔH°) and entropy changes (ΔS°) have been calculated for predicting the nature of adsorption.     

Glutathione-functionalized melamine sponge,a mimic of a natural antidote,as a quick responsive adsorbent for efficient removal of Hg(II) from aqueous solutions

Minamata disease is caused by methylmercury, which is produced by microorganisms from inorganic mercury ions, Hg(II), in the aquatic environment. Adsorption is a feasible method to remove Hg(II) from waters, but there are some drawbacks when using conventional adsorbents, for example, tedious solid–liquid separation, slow response, and excessive residual levels of mercury. In this work, a novel spongy adsorbent has been developed for Hg(II) removal via surface functionalization of melamine formaldehyde sponge by glutathione. This material mimics a natural antidote that removes trace heavy metals in the human body. Results show that the functionalized sponge displays a 99.99% removal efficiency for low concentrations of Hg(II) of 10 mg/L. As a consequence, the residual Hg concentration is lower than 0.005 mg/L, which is slightly below the standard for total mercury in drinking water, of 0.006 mg/L, formulated by the World Health Organization, and much lower that the discharge regulation standard, of 0.01 mg/L, set by the ministry of environmental protection of China. Adsorption kinetic studies indicate that the functionalized sponge has a fast response. Indeed, the adsorption equilibrium can be reached within 10 min, and about 80% of total adsorption capacities are reached in 1 min. Moreover, the maximum adsorption capacity of the glutathione-functionalized sponge is as high as 240.02 mg/g, as shown by adsorption isotherm. Overall our findings disclose the great potential of the developed sponge adsorbent for rapid and efficient removal of Hg(II) from water.     

Multivariate optimization of Cd(II) biosorption onto Ulmus tree leaves from aqueous waste

Ulmus tree leaves were successfully used as a novel and efficient biosorbent for removing cadmium, (Cd(II)), from aqueous solutions in a batch system. A multivariate strategy for optimization of removal efficiency conditions of Cd(II) was carried out. A 2³ full factorial design with three center points (9 runs) was performed for screening the main variables and reducing the large number of experimental runs. Initial concentration of metal ion (C _m), amount of sorbent (m), and pH were considered as the three main variables at two different levels. The maximum removal efficiency of Cd(II) was achieved within 1 h contact time. It was found that all the main factors and their interactions were significant at p < 0.05. Doehlert response surface methodology was utilized (13 runs) for finding a suitable mathematical model. The analysis of variance and some statistical tests such as lack-of-fit, coefficient of determination (R ²), and residual distribution plot confirmed the validity of the model. The optimum conditions for maximum removal of Cd(II) by Ulmus tree leaves were found as pH = 3.4, m (amount of sorbent) = 0.128 g, C _m (initial concentration of metal ion) = 12.1 mg L^?1.     

Kinetic and mechanism studies of the adsorption of lead onto waste cow bone powder (WCBP) surfaces

This study examines the adsorption isotherms, kinetics and mechanisms of Pb2(+) sorption onto waste cow bone powder (WCBP) surfaces. The concentrations of Pb2(+) in the study range from 10 to 90 mg/L. Although the sorption data follow the Langmuir and Freundlich isotherm, a detailed examination reveals that surface sorption or complexation and co-precipitation are the most important mechanisms, along with possibly ion exchange and solid diffusion also contributing to the overall sorption process. The co-precipitation of Pb2(+) with the calcium hydroxyapatite (Ca-HAP) is implied by significant changes in Ca2(+) and PO?3? concentrations during the metal sorption processes. The Pb2(+) sorption onto the WCBP surface by metal complexation with surface functional groups such as ≡ POH. The major metal surface species are likely to be ≡ POPb(+). The sorption isotherm results indicated that Pb2(+) sorption onto the Langmuir and Freundlich constant q(max) and K( F ) is 9.52 and 8.18 mg g?1, respectively. Sorption kinetics results indicated that Pb2(+) sorption onto WCBP was pseudo-second-order rate constants K? was 1.12 g mg?1 h?1. The main mechanism is adsorption or surface complexation (≡POPb(+): 61.6%), co-precipitation or ion exchange [Ca?(.)?? Pb?(.)?? (PO?)? (OH): 21.4%] and other precipitation [Pb 50 mg L?1 and natural pH: 17%). Sorption isotherms showed that WCBP has a much higher Pb2(+) removal rate in an aqueous solution; the greater capability of WCBP to remove aqueous Pb2(+) indicates its potential as another promising way to remediate Pb2(+)-contaminated media.     

Heavy metal pollution in soil and plants at bone char site

This study determined the heavy metal concentration in soil and plants at a bone char site in Umuahia, Nigeria. Soil and plant samples collected in a randomized complete block design (RCBD) were analyzed for zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), and arsenic (As). The concentration of metals in soil and plants in the vicinity of the bone char site are as follows: Zn (172?mg?kg^?1) and Ni (0.62?mg?kg^?1) in soil were highest at site P₃, Pb (2.37?mg?kg^?1) and As (0.08?mg?kg^?1) at site P₁, and Cd (18.30?mg?kg^?1) at site P₂. In plants, the concentrations of Zn (41.17?mg?kg^?1) and Cd (3?mg?kg^?1) were highest in Albizia ferruginea, Ni in Dialium guineense (0.09?mg?kg^?1), while Pb was in D. guineense (0.08?mg?kg^?1) and Spathodea companulata (0.06?mg?kg^?1). The levels of Zn, Cd, Pb, Ni, and As in soil ranged from 11.2 to 172, 2.68 to 18.2, 0.026 to 2.37, 0.33 to 0.62, and 0.02 to 0.08?mg?kg^?1, respectively. In plants, the concentration of Zn, Cd, Pb, and Ni ranged from 2.01 to 41.17, 0.12 to 3, 0.02 to 0.08, and 0.03 to 0.09?mg?kg^?1, respectively. There were significant correlations between Zn and Cd, and Pb and As in soil. The high concentration of Cd in soil might affect soil productivity.     

Abstracts to forthcoming papers

Food is the major source of metal exposure for the nonsmoking general population. Food samples of plant and animal origin from Ismailia, Egypt, were analyzed for the content of cadmium (Cd), lead (Pb), chromium (Cr), zinc (Zn), and copper (Cu) using AAS. The Cr, Zn, and Cu concentrations were in the range of 1.7–249?µg?kg^?1 wet weight (ww), 2–66?mg?kg^?1?ww, and 0.5–3.46?mg?kg^?1?ww, respectively. The mean daily intake of Cr, Zn, and Cu was 28.9?µg day^?1, 8.55?mg day^?1, and 1.7?mg day^?1, respectively. The intake estimates are within the range of the recommended intake established internationally. Concentrations of Cd and Pb were in the range of 10–321?µg?kg^?1?ww and 31–1200?µg?kg^?1?ww, respectively. The weekly dietary intake for Cd and Pb (4.02 and 20.4?µg?kg^?1 b.w, respectively) is lower than the FAO/WHO PTWI. Bread is the foodstuff that provided the highest rate of Pb and Cd (62 and 46% of the daily intake) to adults in Ismailia city.     

Trichoderma harzianum: a green sorbent for Pb(II) uptake from aqueous solutions

This investigation describes the use of specially cultivated, nonliving biomass of Trichoderma harzianum as a biosorbent for the batch removal of Pb(II) from a stirred system under different experimental conditions. The metal removal depended upon pH, sorbent particle size, initial Pb(II) concentration, shaking speed, and sorption time. The optimal experimental conditions for the removal of Pb(II) by T. harzianum with an initial metal concentration of 100 mg L^?1 were obtained at a particle size of 53 μm, a pH of 4.5, a shaking speed of 200 rpm, and a contact time of 720 min. The results were analyzed in terms of adsorption isotherms and kinetic models. The Freundlich isotherm model and pseudo second-order model fitted well in the data. T. harzianum proved to be a good biomaterial for accumulating Pb(II) from aqueous solutions (q = 460 mg g^?1).     

十溴联苯醚(BDE209)对蜡状芽胞杆菌吸附/释放金属离子的影响

针对重金属及多溴联苯醚(PBDEs)复合污染问题,以蜡状芽孢杆菌(Bacillus cereus)复合菌为吸附材料,研究了十溴联苯醚(BDE209)对蜡状芽孢杆菌复合菌吸附及释放金属离子的影响.结果表明,蜡状芽孢杆菌复合菌对低浓度的Pb(II)(0.712mg·L-1)、Zn(II)(4.844mg·L-1)具有快速、高效、稳定的吸附能力,最高吸附率分别达到98.31%和97.83%;对低浓度的Cu(II)(1.915mg·L-1)也能起到一定的去除作用,吸附率最高可达59.90%.复合菌吸附重金属离子的同时,释放了其他金属离子:Ca(II)、K(I)、Na(I),且释放总量大于吸附总量.不同浓度的BDE209对复合菌吸附重金属产生不同的影响.1mg·L-1的BDE209基本表现为促进复合菌对重金属的吸附;而10mg·L-1的BDE209在0～4h之间促进复合菌对Pb(II)、Zn(II)的吸附,在反应4h后明显抑制吸附作用,而对Cu(II)则始终表现为促进作用.BDE209对金属离子释放的影响主要体现在反应的初始阶段(0～4h),表现为高浓度的BDE209减缓K(I)、Na(I)的释放.     

Competitive adsorption and desorption of copper and lead in some soil of North China

The competitive adsorption and desorption of Pb(II) and Cu(II) ions in the soil of three sites in North China were investigated using single and binary metal solutions with 0.01 mol·L^-1 CaCl₂ as background electrolyte. The desorption isotherms of Pb(II) and Cu(II) were similar to the adsorption isotherms, which can be fitted well by Freundlich equation (R₂>0.96). The soil in the three sites had greater sorption capacities for Pb(II) than Cu(II), which was affected strongly by the soil characteristics. In the binary metal solution containing 1∶1 molar ratio of Pb(II) and Cu(II), the total amount of Pb(II) and Cu(II) adsorption was affected by the simultaneous presence of the two metal ions, indicating the existence of adsorption competition between the two metal ions. Fourier transform infrared (FT-IR) spectroscopy was used to investigate the interaction between soil and metal ions, and the results revealed that the carboxyl and hydroxyl groups in the soil were the main binding sites of metal ions.     

Histology of Sculpin spp. in East Greenland. II. Histopathology and trace element concentrations

Abstract

For many years, the sculpin has been utilized as a sentinel monitoring species for anthropogenic impacts on the marine environment. To further develop its potential as a screening model body burden of several trace elements, including cadmium (Cd), copper (Cu), mercury (Hg), lead (Pb) and selenium (Se), were investigated. In addition, histopathology in shorthorn sculpins (Myoxocephalus scorpius; n?=?20) and fourhorn sculpins (Myoxocephalus quadricornis; n?=?10) were examined at three sites around the Scoresby Sound settlement in Central East Greenland. Fourhorn sculpins caught at the most distant site from the settlement, contained significantly higher hepatic Cu and Cd concentrations as well as significantly elevated gill Pb levels compared to the shorthorn sculpins collected at two other sites closer to the settlement. Histological examinations showed that fish with significantly higher concentrations of hepatic Cd and Se exhibited greater nuclear alterations, interstitial hyperplasia/hypertrophy, interstitial mononuclear infiltrations and granulomas. Further, fish with higher Cd and Cu gill tissue levels displayed a significantly higher number of cytoplasmic alterations and lamellar epithelium lifting, hypertrophic and hyperplastic epithelium along with mucus cell hyperplasia. While the presence of liver lesions were not species or sex-specific, the presence of gill lesions decreased in the order female fourhorn sculpins?>?female shorthorn sculpins?>?male fourhorn sculpins?>?male shorthorn sculpins. Hepatic Hg concentrations exceeded known lowest observable effect doses (LOED) for fish (0.1–0.5?μg g^?1 ww) in 27% of fish, while liver Cd residues in 80% exceeded LOED (0.42–1.8?μg g^?1 ww). Based upon these results, data suggest that using the sculpin as a valuable sentinel fish species histopathology may serve as a reliable tool for assessing marine ecosystem exposure to trace metals. However, confounding physiological and ecological factors also need to be considered.     

Assessment of lead (Pb) and cadmium (Cd) in 10 samples of Iranian and foreign consumed tea leaves and dissolved beverages

The tea bush (Comellia sinensis) is grown commercially in a large number of countries. Tea is a beverage, which consists of processed and dried tea leaves and is one of the most popular global drinks. Tea contains some heavy metals, such as Pb and Cd, which exert adverse effects on human health. The aim of this study was to determine the Pb and Cd levels in tea leaves and in the solution following dissolution in boiling water. In order to assess Pb and Cd in Iranian consumed tea, 10 tea samples were analyzed for metal concentration in tea leaves and boiled water solutions. For tea leaf analysis, the samples (5 g) were oven dried, ash dried in a cold oven, cooled at room temperature and then 2 mL nitric acid were added to the samples and the acid were evaporated on hot plate. For tea solution analysis, tea (5 g) was added to 250 mL of boiling distilled water and after filtering, the liquid was collected as tea solution. The results show that the average concentration of Pb and Cd in Iranian tea leaves was 9.73 and 0.67 mg kg^?1 and in foreign tea leaves 2.5 and 0.53 mg kg^?1, respectively. Shariat and Golkis representing Iranian, and Red Shahrzad and Ahmad representing foreign tea, showed the highest and lowest concentration respectively of Pb. Bamdad and Shariat representing Iranian, and Black Sedaghat and Ahmad representing foreign tea, showed the highest and lowest levels of Cd, respectively. The results showed that the longer the time of dissolution of the tea, the higher concentration of Pb and Cd in tea solution. In order to control Pb and Cd levels in tea, the type of water used in agriculture and quality of soil needs to be regulated.     

Biosorption of cadmium and nickel ions using marine macrophyte,Cymodocea nodosa

ABSTRACT

Seagrass (Cymodocea nodosa) ability to remove cadmium and nickel ions from single metal solutions was investigated in the present study. Metal ions were measured in the solution using an atomic absorption spectrophotometer. Various operational parameters (initial pH, biomass dose, metal ion concentration, and contact time) were tested and found to affect the uptake capacity of Cd (II) and Ni (II). More than 70% of biosorption capacity occurred in the first few minutes for both metal ions. The pseudo-second-order kinetic model and the Langmuir model were found to best fit the experimental data of Cd (II) and Ni (II) biosorption. The maximum uptake capacity (q_max) was 11.6 and 16.7?mg.g^?1 for Cd (II) and Ni (II), respectively. The biosorbent was characterised using Fourier transform infrared spectrometry (FTIR), scanning electron microscope (SEM), and energy-dispersive X-ray spectroscopy (EDX). The infrared spectrum demonstrated that hydroxyl, carboxyl, and phenolic functional groups are the major binding sites for Cd (II) and Ni (II) metals. The ion exchange mechanism plays an important role during biosorption process as shown in EDX analysis. Our results conclude that marine macrophyte C. nodosa can be used as a low-cost biosorbent for the removal of Cd (II) and Ni (II) in wastewater.     

不同作物原料热裂解生物质炭对溶液中Cd2+和Pb2+的吸附特性

选择由小麦秸秆、玉米秸秆和花生壳经350~500℃热裂解制成的生物质炭,研究生物黑炭对水溶液中Cd2+和Pb2+的吸附特性,分析了pH值、吸附时间、溶液初始质量浓度、生物质炭粒径和投加量对吸附效果的影响。结果表明:生物质炭对Cd2+和Pb2+的吸附约10 min即达平衡;3种生物质炭对Cd2+和Pb2+的等温吸附均可用Langmuir方程和Freundlich方程拟合,玉米秸秆炭对Cd2+和Pb2+的最大吸附量远大于小麦秸秆炭和花生壳炭;在生物黑炭投加量为150 mg(6 g.L-1)时,3种生物黑炭对溶液Cd2+的去除率均在90%以上,玉米秸秆炭对溶液Pb2+的去除率达90.30%,而小麦秸秆炭和花生壳炭的去除率仅为52%和47%,玉米秸秆炭有望成为处理重金属污染废水的新型吸附材料。     

Polyaspartic acid alleviates heavy metal toxicity in zebrafish (Danio rerio)

The present study was conducted to investigate the effect of polyaspartic acid (PASP) on Pb, Cu, and Cd toxicity in zebrafish (Danio rerio). After 24 hours’ toxicity test on zebrafish, LC50, survival rates of zebrafish and catalase (CAT) activity were determined. The results revealed that the 24-hour survival rates of zebrafish exposed to Pb (P?P?P?P?in vitro and in vivo mechanisms.