Biosorption of Pb(II) and Cr(III) from aqueous solutions: breakthrough curves and modeling studies

The sorption capacity parameters obtained for batch studies provide useful information about biosorption system. However, such data fail to explain the process under continuous-flow conditions. The present study is an attempt to explore the biosorption of Pb(II) and Cr(III) by straw from local wheat (Triticum aestivum). The biosorbent has been characterized by using Fourier transform infrared spectroscopy and surface area and elemental analyses and found to be porous and polyfunctional. S-shaped breakthrough curves were obtained at different column heights for the both metal ions. Various breakthrough parameters and saturation times have been determined. The column data have been successfully used to study the Bohart–Adams' bed depth service time (BDST) model and Yoon and Nelson's model. It was found that BDST model quite efficiently explained the whole column data whereas Yoon and Nelson model could explain it below 90 % breakthrough concentration. The predicted and calculated BDST parameters were in agreement with each other. Yoon and Nelson's constant decreased with an increase in the column height for both metal ions. Effect of change in flow rate on the Pb(II) biosorption has also been discussed with respect to BDST approach.     

Biosorption properties of Morus alba L. for Cd (II) ions removal from aqueous solutions

The abundantly available industrial waste product Morus alba L. pomace (MAP) is one of the cost-effective biosorbent for removal of metal ions from aqueous solutions. Hence, in the present study, we aimed to test the ability of MAP to remove Cd(II) ions through batch biosorption process. Firstly, MAP was characterized using several techniques, and then the influence of various experimental parameters such as initial pH of the aqueous solution, initial Cd(II) concentration, contact time, MAP concentration, and temperature were evaluated upon the biosorption process. It was found that the maximum uptake of Cd(II) ions occurred at initial pH 6.0 and optimum contact time was observed as 60 min. Cd(II) ions adsorption on MAP analyzed by the Langmuir and Freundlich isotherm models and the maximum monolayer biosorption capacity of MAP was found to be 21.69 mg?g^?1 by using the Langmuir isotherm model. The pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models were employed to describe the biosorption kinetics. In order to investigate the thermodynamic properties of the biosorption process, the changes in the Gibbs free energy (?G), enthalpy (?H), and entropy (?S) were also evaluated and it has been concluded that the process was feasible, spontaneous, and endothermic in the temperature range of 5–40 °C.     

Photodegradation of Pyrimethanil induced by iron(III) in aqueous solutions

In this study an abiotic process was suggested to evaluate the behaviour of Pyrimethanil (antibotrytic fungicide) in real matrices. This process consists of a photodegradation of the fungicide carried out in the presence of iron(III) in three types of buffer; acetate, phosphate and citrate. The experimental results show that the nature of buffered solutions influences both the rate of disappearance of Pyrimethanil and, in the case of citrate, also the kind of by-products formed during the photodegradation process. For each case examined, the breakdown products were identified by using liquid chromatography (LC) or gas chromatography (GC), coupled with mass spectrometry (MS). The degradation pathways of the fungicide were proposed and the relative kinetic constants were evaluated. The abiotic photodegradation process shows the possibility of different pathways for Pyrimethanil degradation in environmental matrices such as the soil, plants and foodstuffs, where iron (free and/or bonded) is a natural component.     

Chromium (VI) biosorption properties of multiple resistant bacteria isolated from industrial sewerage

Chromium (VI) [Cr (VI)] biosorption by four resistant autochthonous bacterial strains was investigated to determine their potential for use in sustainable marine water-pollution control. Maximum exchange between Cr (VI) ions and protons on the cells surfaces were at 30–35 °C, pH?2.0 and 350–450 mg/L. The bacterial strains effectively removed 79.0–90.5 % Cr (VI) ions from solution. Furthermore, 85.3–93.0 % of Cr (VI) ions were regenerated from the biomasses, and 83.4–91.7 % of the metal was adsorbed when the biomasses was reused. Langmuir isotherm performed better than Freundlich isotherm, depicting that Cr (VI) affinity was in the sequence Rhodococcus sp. AL03Ni?>?Burkholderia cepacia AL96Co?>?Corynebacterium kutscheri FL108Hg?>?Pseudomonas aeruginosa CA207Ni. Biosorption isotherms confirmed that Rhodococcus sp. AL03Ni was a better biosorbent with a maximum uptake of 107.46 mg of Cr (VI) per g (dry weight) of biomass. The results highlight the high potential of the organisms for bacteria-based detoxification of Cr (VI) via biosorption.     

Evaluation of Pb (II) biosorption utilizing sugarcane bagasse colonized by <Emphasis Type="Italic">Basidiomycetes</Emphasis>

The contamination of water resources by metallic ions is a serious risk to public health and the environment. Therefore, a great emphasis has been given to alternative biosorption methods that are based on the retention of aqueous-solution pollutants; in the last decades, several agricultural residues have been explored as low-cost adsorbent. In this study, the ability of Pb (II) biosorption using sugarcane bagasse modified by different fungal species was evaluated. The presence of carbonyl, hydroxyl, and carboxyl groups in the biosorbent was observed by spectroscopy in the infrared region. By scanning electron microscopy, changes in the morphology of modified material surfaces were observed. The highest adsorption capacity occurred at pH 5.0, while the shorter adsorbate-adsorbent equilibrium was at 20 min, and the system followed the pseudo-second-order model. The maximum biosorption in isotherms was found at 58.34 mg g^?1 for modified residue by Pleurotus ostreatus U2-11, and the system followed the Langmuir isotherm. The biosorption process was energetically spontaneous with low desorption values. This modification showed great potential for filters to remove Pb (II) and provide the preservation of water resources and animal health.     

Sediment load and bioconcentration of heavy metals by shrimp (Peaneus notalis) from Epe Lagoon, Nigeria

In many developing countries, surface waters, especially rivers and lagoons, have become deposition sites for all sorts of wastes. Three sampling sites located trigonally on Epe lagoon, Lagos, Nigeria were identified, and water, sediment, and commonly farmed shrimp, Peaneus notalis, were sampled and assessed for heavy metal concentrations. Zn, Pb, Ni, Cu, Cr, Cd, and Mn were determined in the aqua regia digests of the samples by means of Perkin Elmer AAnalyst 200 atomic absorption spectrophotometer. Heavy metals occurred above detection limits at all sites. The highest load of these trace elements was found in sediment samples followed by the water samples. The levels observed in the shrimp samples, however, were much lower than WHO levels. In the distribution, zinc was the highest metal found in the samples ranging from 17.94 ± 2.60 mg/L in water to 37.85 ± 9.35 μg/g in sediments. The least was Cd 0.03 ± 0.01 mg/L in water and 0.28 ± 0.04 μg/g in sediments. Lead was the most widely varied metal in shrimp with a 84.38% coefficient of variation. Apart from Cr, the metals appeared to be fairly and evenly distributed in the sediment, with coefficient of variation ranging from 14.29% (Cd) to 24.76% (Mn) The variations were between 14.49% (Zn) and 66.67% (Cr) in the water samples. The paired t test carried out between water and sediment, water and shrimp, and shrimp and sediment was significant at p?=?0.05. Three-factor analysis of variance did not reveal any significant difference in metal burdens among the trigonally located sites under investigation. Shrimp samples showed evidence of bioaccumulation but are still below internationally established levels.     

间磺酸基偶氮安替比林光度法测定Ni(Ⅱ)的研究

间磺酸基偶氮安替比林与Ni(Ⅱ )在pH =4 .0～ 6.0HAc -NaAc缓冲溶液中形成 1∶1蓝色络合物 ,λmax=630nm ,ε=5 .4 5× 1 0 4 L·mol- 1·cm- 1,Ni(Ⅱ )含量在 0～ 0 .30mg/L符合比耳定律。用于电镀废水中镍的测定 ,结果满意     

Biosorption properties of Cd(II), Pb(II), and Cu(II) of extracellular polymeric substances (EPS) extracted from Aspergillus fumigatus and determined by polarographic method

Extracellular polymeric substances (EPS) were extracted from Aspergillus fumigatus using cationic exchange resin technique. The EPS were mainly composed of polysaccharide and low quantities of protein and nucleic acid. Biosorption of Cd(II), Pb(II), and Cu(II) of EPS was investigated as a function of pH using differential pulse polarography and the Ruzic model. Results showed that the EPS biosorption capacity determined using either the direct titration curves i?=?f(C _M) or the method proposed by Ruzic (Analytica Chimica Acta 140:99–113, 1982) were coincident. Cu(II) had the highest affinity with EPS followed by Pb(II) and Cd(II). The total number of binding sites for Cu(II) and Cd(II) increased with pH in the range of 4.0–7.0. Similar trend was observed for Pb(II) at pH?4.0–5.0, while precipitates were observed at pH?6.0 and 7.0. The conditional binding constants of these three metals displayed low levels of fluctuation with pH and ranged from 4.02?±?0.02 to 5.54?±?0.05.     

Determination of Pb(II), Zn(II), Cd(II), and Co(II) ions by flame atomic absorption spectrometry in food and water samples after preconcentration by coprecipitation with Mo(VI)-diethyldithiocarbamate

A new, simple, and rapid separation and preconcentration procedure, for determination of Pb(II), Cd(II), Zn(II), and Co(II) ions in environmental real samples, has been developed. The method is based on the combination of coprecipitation of analyte ions by the aid of the Mo(VI)–diethyldithiocarbamate–(Mo(VI)-DDTC) precipitate and flame atomic absorption spectrometric determinations. The effects of experimental conditions like pH of the aqueous solution, amounts of DDTC and Mo(VI), standing time, centrifugation rate and time, sample volume, etc. and also the influences of some foreign ions were investigated in detail on the quantitative recoveries of the analyte ions. The preconcentration factors were found to be 150 for Pb(II), Zn(II) and Co(II), and 200 for Cd(II) ions. The detection limits were in the range of 0.1–2.2 μg L^?1 while the relative standard deviations were found to be lower than 5 % for the studied analyte ions. The accuracy of the method was checked by spiked/recovery tests and the analysis of certified reference material (CRM TMDW-500 Drinking Water). The procedure was successfully applied to seawater and stream water as liquid samples and baby food and dried eggplant as solid samples in order to determine the levels of Pb(II), Cd(II), Zn(II), and Co(II) ions.     

Screening volatile organic compounds (VOCs) emissions from five marine phytoplankton species by head space gas chromatography/mass spectrometry (HS-GC/MS)

Five marine cosmopolitan phytoplankton species namely; Calcidiscus leptoporus, Emiliania huxleyi, Phaeodactylum tricornutum, Chaetoceros neogracilis and Dunaliella tertiolecta were screened for emissions of selected VOCs using head space gas chromatography/mass spectrometry (HS-GC/MS) in single ion mode. The VOCs investigated included isoprene and various halogenated compounds. Among the different algae groups, the two diatoms Ch. neogracilis and P. tricornutum were the strongest emitters of methyl bromide (CH3Br), and Ch. neogracilis was the strongest emitter of isoprene. Furthermore, we present evidence that several chlorinated organic compounds, normally considered as anthropogenic, can be produced from marine phytoplankton (namely chloroform, dichloromethane, trichloroethylene, tetrachloroethylene, chlorobenzene and dichlorobenzene).     

Heavy and trace metal concentrations in three rockpool shrimp species (Palaemon elegans, Palaemon adspersus and Palaemon serratus) from Tenerife (Canary Islands)

Trace metal concentrations (Fe, Cu, Co, Zn, Ni and V) were investigated in three rockpool shrimp species (Palaemon elegans, Palaemon adspersus and Palaemon serratus) from six littoral sampling sites (polluted and non-polluted) of Tenerife in the Canary Islands (Central Eastern Atlantic), Spain. Sex ratio for all three species has been determined: females predominate over males in all species and significant differences in total length and cephalothorax length was detected between sexes, being females larger than males. By other side, concentrations of trace metals were determined in whole specimens. Higher mean values for every metal were observed in P. adspersus. In males, higher values were observed in P. elegans and P. serratus, whereas in P. adspersus, mean values are higher in females. Finally, mean concentrations of trace metals studied were higher, in general terms, in the two clearly polluted stations: Santa Cruz of Tenerife commercial harbour and its fishery dock dependency.     

Removal of mercury(II) ions in aqueous solution using the peel biomass of <Emphasis Type="Italic">Pachira aquatica</Emphasis> Aubl: kinetics and adsorption equilibrium studies

Mercury is a highly toxic substance that is a health hazard to humans. This study aims to investigate powders obtained from the peel of the fruit of Pachira aquatica Aubl, in its in natura and/or acidified form, as an adsorbent for the removal of mercury ions in aqueous solution. The materials were characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. The infrared spectra showed bands corresponding to the axial deformation of carbonyls from carboxylic acids, the most important functional group responsible for fixing the metal species to the adsorbent material. The thermograms displayed mass losses related to the decomposition of three major components, i.e., hemicellulose, cellulose, and lignin. The adsorption process was evaluated using cold-vapor atomic fluorescence spectrometry (CV AFS) and cold-vapor atomic absorption spectrometry (CV AAS). Three isotherm models were employed. The adsorption isotherm model, Langmuir-Freundlich, best represented the adsorption process, and the maximum adsorption capacity was predicted to be 0.71 and 0.58 mg g^?1 at 25 °C in nature and acidified, respectively. Adsorption efficiencies were further tested on real aqueous wastewater samples, and removal of Hg(II) was recorded as 69.6 % for biomass acidified and 76.3 % for biomass in nature. Results obtained from sorption experiments on real aqueous wastewater samples revealed that recovery of the target metal ions was very satisfactory. The pseudo-second-order model showed the best correlation to the experimental data. The current findings showed that the investigated materials are potential adsorbents for mercury(II) ion removal in aqueous solution, with acidified P. aquatica Aubl being the most efficient adsorbent.     

Solid phase extraction of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions with 1-(2-thiazolylazo)-2-naphthol loaded Amberlite XAD-1180

A new method for separation and preconcentration of trace amounts of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions in various matrices was proposed. The method is based on the adsorption and chelation of the metal ions on a column containing Amberlite XAD-1180 resin impregnated with 1-(2-thiazolylazo)-2-naphthol (TAN) reagent prior to their determination by flame atomic absorption spectrometry (FAAS). The effect of pH, type, concentration and volume of eluent, sample volume, flow rates of sample and elution solutions, and interfering ions have been investigated. The optimum pH for simultaneous retention of all the metal ions was 9. Eluent for quantitative elution was 20 ml of 2 mol l(-1) HNO(3). The optimum sample and eluent flow rates were found as 4 ml min(-1), and also sample volume was 500 ml, except for Mn (87% recovery). The sorption capacity of the resin was found to be 0.77, 0.41, 0.57, and 0.30 mg g(-1) for Cu(II), Ni(II), Cd(II), and Mn(II), respectively. The preconcentration factor of the method was 200 for Cu(II), 150 for Pb(II), 100 for Cd(II) and Ni(II), and 50 for Mn(II). The recovery values for all of the metal ions were > or = 95% and relative standard deviations (RSDs) were < or = 5.1%. The detection limit values were in the range of 0.03 and 1.19 microg l(-1). The accuracy of the method was confirmed by analysing the certified reference materials (TMDA 54.4 fortified lake water and GBW 07605 tea samples) and the recovery studies. This procedure was applied to the determination of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) in waste water and lake water samples.     

Freshwater shrimp (Palaemonetes australis) as a potential bioindicator of crustacean health

Palaemonetes australis is a euryhaline shrimp found in southwestern Australian estuaries. To determine if P. australis is a suitable bioindicator species for monitoring the health of estuarine biota, they were exposed to measured concentrations of the polycyclic aromatic hydrocarbon, benzo[a]pyrene (B[a]P) at 0.01, 0.1, or 1?ppm for 14?days under laboratory conditions. At the end of exposure the shrimp were sacrificed for biomarker [ethoxycoumarin O-deethylase (ECOD), 8-oxo-dG concentration, and sorbitol dehydrogenase (SDH) activity] analyses. Gender did not appear to influence biomarker responses of the shrimp in this study. ECOD activity was induced in the treatment groups in a linear fashion from three (0.01?ppm) times to 12 (1?ppm) times the negative controls. 8-oxo-dG concentration was reduced three times in treatment groups below the controls suggesting impaired DNA repair pathways. There was no increase in SDH, signifying hepatopancreatic cell damage had not occurred in any treatment group. The response of P. australis to B[a]P exposure indicates that this crustacean is suitable bioindicator species for both laboratory studies and field monitoring. A combination of ECOD and SDH activities and 8-oxo-dG concentration represent a suitable suite of biomarkers for environmental monitoring of the sublethal effects of organic pollution to crustaceans from an estuarine environment.     

Preparation of 2-mercaptobenzothiazole-derivatized mesoporous silica and removal of Hg(ii) from aqueous solution

Mesoporous silicas (SBA-15 and MCM-41) have been functionalized by two different methods. Using the heterogeneous route the silylating agent, 3-chloropropyltriethoxysilane, was initially immobilized onto the mesoporous silica surface to give the chlorinated mesoporous silica Cl-SBA-15 or Cl-MCM-41. In a second reaction a multifunctionalized N,S donor compound (2-mercaptobenzothiazol) was incorporated to obtain the functionalized silicas denoted as MBT-SBA-15-Het and MBT-MCM-41-Het. Using the homogeneous route, the functionalization was achieved via the one step reaction of the mesoporous silica with an organic ligand containing the chelating functions, to give the modified mesoporous silicas denoted as MBT-SBA-15-Hom or MBT-MCM-41-Hom. The functionalized mesoporous silicas were employed as adsorbents for the regeneration of aqueous solutions at pH 6 contaminated with Hg(ii) at room temperature. Results obtained indicate that mercury adsorption was higher in the mesoporus silicas prepared by the homogeneous method, and the maximum adsorption value (0.24 +/- 0.02 mmol Hg(ii) g(-1)) was obtained for MBT-SBA-15-Hom. The chemically stability in acid medium of the functionalized silicas, possibility its regeneration washing with concentrate HCl, resulting in the reuse of the adsorbent material for several cycles.     

Multiple metal tolerance and biosorption of cadmium by Candida tropicalis isolated from industrial effluents: glutathione as detoxifying agent

The ability of cadmium uptake by metal-resistant yeast, Candida tropicalis, from the liquid medium and wastewater was evaluated. The minimum inhibitory concentration of Cd^2?+? against C. tropicalis was 2,500 mg L^???1. The yeast also showed tolerance toward Zn^2?+? (1,400 mg L^???1), Ni^2?+? (1,000 mg L^???1), Hg^2?+? (1,400 mg L^???1), Cu^2?+? (1,000 mg L^???1), Cr^6?+? (1,200 mg L^???1), and Pb^2?+? (1,000 mg L^???1). The yeast isolate showed typical growth curves, but lag and log phases extended in the presence of cadmium. The yeast isolate showed optimum growth at 30°C and pH 8. The metal processing ability of the isolate was determined in a medium containing 100 mg L^???1 of Cd^2?+?. C. tropicalis could decline Cd^2?+? 70%, 85%, and 92% from the medium after 48, 96, and 144 h, respectively. C. tropicalis was also able to remove Cd^2?+? 40% and 78% from the wastewater after 6 and 12 days, respectively. Cd produced an increase in glutathione (GSH) and nonprotein thiol levels by 135% and 134% at 100-mg L^???1 concentration, respectively. An increase in the synthesis of GSH is involved in metal tolerance, and the presence of increasing GSH concentrations may be a marker for high metal stress in C. tropicalis. C. tropicalis, which is resistant to heavy metal ions and is adaptable to the local environmental conditions, may be employed for metal detoxification operations.     

Effect of temperature on single and competitive adsorptions of Cu(II) and Zn(II) onto natural clays

This study conducted a combined adsorption-sequential extractionanalysis (CASA), by which five phases (i.e., exchangeable, carbonate, Mn-Oxide, organic, and Fe-Oxide phases) of adsorbed heavy metals were analyzed, to investigate temperature effects on single and competitive adsorptions of Zn(II) and Cu(II) ontonatural clays. In the case of single adsorption of Zn, the exchangeable phase adsorption decreased from 65 to 40%, but thecarbonate phase adsorption increased from 30 to 40%, with an increase in temperature from 15 to 55 °C. However, in itscompetitive adsorption with Cu, Zn was mostly present in the exchangeable phase (over 90%), and with an increase in temperature, the exchangeable phase adsorption decreased only 10%. In the case of Cu, over 50% among the total amount of adsorption was present in the carbonate phase in both cases ofsingle and competitive adsorptions. The carbonate phaseadsorption of Cu increased from 56 to 61% and from 60 to 66% in single and competitive adsorptions, respectively, with atemperature increase. These results show that in the case of Zn,the major mechanism of retention in natural clay soils might beexchangeable phase adsorption, especially in the case of competitive adsorption with Cu. However, in the case of Cu, the major mechanism might be carbonate phase adsorption, which is known to be a more immobile phase than exchangeable phase adsorption. It seems that the adsorption of Zn and Cu onto natural clays is an endothermic reaction, which represents thatthe adsorption equilibrium constants and capacities increase with a temperature increase, with the exception of exchangeablephase adsorption.     

Volatile organic compounds (VOCs) emitted from materials collected from buildings affected by microorganisms

In this study mould damaged materials, including carpet, concrete, gypsum board, insulation, plastic, sand and wood, from 20 different buildings with moisture problems were collected. To study emissions from these materials both conventional methods for sampling, such as collection on Tenax TA, were used as well as complementary methods for sampling a wider spectrum of compounds, such as more volatile VOCs, amines and aldehydes. Analysis was carried out using gas chromatography and high-performance liquid chromatography. Mass spectrometry was used for identification of compounds. Alcohols and ketones were almost exclusively emitted from the materials after they had been wet for a week. Acids were also emitted in large quantities from wet gypsum board and plastic. No primary or secondary amines could be identified, but two tertiary amines, trimethylamine and triethylamine, were emitted from sand contaminated by Bacillus. The most common moulds found were Penicillium and Aspergillus. A multivariate method (partial least squares, PLS) was used to investigate the emission patterns from the materials. Materials with bacterial growth had a different VOC profile to those with only mould growth.     

Removal of 8-quinolinecarboxylic acid pesticide from aqueous solution by adsorption on activated montmorillonites

Sodium montmorillonite (Na-M), acidic montmorillonite (H-M), and organo-acidic montmorillonite (Org-H-M) were applied to remove the herbicide 8-quinolinecarboxylic acid (8-QCA). The montmorillonites containing adsorbed 8-QCA were investigated by transmission electron microscopy, FT-IR spectroscopy, X-ray diffraction analysis, X-ray fluorescence thermogravimetric analysis, and physical adsorption of gases. Experiments showed that the amount of adsorbed 8-QCA increased at lower pH, reaching a maximum at pH 2. The adsorption kinetics was found to follow the pseudo-second-order kinetic model. The Langmuir model provided the best correlation of experimental data for adsorption equilibria. The adsorption of 8-QCA decreased in the order Org-H-M > H-M > Na-M. Isotherms were also used to obtain the thermodynamic parameters. The negative values of ΔG indicated the spontaneous nature of the adsorption process.