Study of fluxing in Al refining process by rotary and crucible furnaces

The process used to obtain recycled Al alloys depends on the scrap quality. Rotary furnaces are normally used in Europe as they allow a great productivity and they can process low quality scrap using a salt flux to protect the molten metal from oxidation. In this article, the effect of the quantity of salt on the metal recovery has been experimentally investigated by melting several types of scrap under a mixture of NaCl–KCl–Na₃AlF₆ salts. The quantity of salt has been related to the salt factor (SF), which is the ratio between the non-metallic content in the scrap and the quantity of salt required. The same levels of salt factor have been tested by melting the scrap in rotary and crucible furnaces. The metal recovery increases with the salt content for both furnaces. The results obtained with the different melting processes are comparable because the yield difference is similar considering different salt factors. Crucible furnace gives greater metal recovery but it cannot replace rotary furnace in Al refining industry due to lower melting capacity. However, the results highlight that the optimisation of the Al refining process can be supported by preliminary tests through crucible furnaces reducing the time and material consumptions.     

Water management in Saudi Arabia: a case study of Makkah Al Mukarramah region

Environment, Development and Sustainability - In the hydrologic design of water management infrastructures, rainfall characteristics are often used and the available historical rainfall events in...     

The relationship of dissolved Pb to some dissolved trace metals (Al, Cr, Mn, and Zn) and to dissolved nitrate and phosphate in a freshwater aquatic system in Mauritius

The relationship of some dissolved trace metals (Al, Cr, Mn, Zn, and Pb) with one another and to dissolved phosphate and nitrate in a freshwater aquatic system at Flic en Flac and Grand River North West (GRNW) in Mauritius (1850 km2, 20 degrees S and 57 degrees E, Western Indian ocean) is reported following trace metal determination using inductively coupled plasma mass spectrometry (ICP-MS). Dissolved Al (<200 ng ml(-1)), Cr (<50 ng ml(-1)), Mn (<50 ng ml(-1)), Zn (< 100 ng ml(-1)), and Pb (<50 ng ml(-1)) upstream, downstream GRNW and in the marshes and rivulet at Flic en Flac were found to be below the recommended EEC maximum admissible concentrations and within the ambient drinking water quality standards in Mauritius. Dissolved Pb was significantly positively correlated to both dissolved Cr and Zn suggesting that the cycling for dissolved Pb is linked to the cycling of both dissolved Cr and Zn along GRNW. The common influential cycling of Pb and Zn was further reinforced as both dissolved Pb and Zn were significantly positively correlated to dissolved phosphate, which suggested a biological role in the cycling of Zn and Pb. The role of biological activity or adsorption to biological systems in Pb cycling along GRNW is further suggested as dissolved Pb was significantly correlated to dissolved nitrate. The apparent absence of the dissolved Al, Cr, and Mn with dissolved nitrate and phosphate could be attributed to factors such as the lower sensitivity of the GRNW to metal uptake during biological activity during the time frame considered. The cycling of dissolved Al and Mn was also not linked to the cycling of Cr, Zn, and Pb as no significant correlation was found along GRNW.