Management and performance of Taiwan's waste recycling fund

Taiwan's resource recycling program was formally established in 1989, starting with the mandatory recycling of polyethylene terephthalate bottles. The number of mandatory regulated materials was extended to 8 categories with 27 items by 2002. Because of false data reporting, financial scandal, lack of transparency of the system, and the demand from parliament, the recycling policy has gradually changed from entirely privatized to being nationalized. Currently, the structure is built on six main bodies: fund management committee, consumers, industries responsible, recyclers, fee reviewing committee, and auditing agents. The industries that are responsible submit a fee, which is set by the fee reviewing committee, to the waste recycling fund (WRF), which is operated by the fund management committee. The auditing agents routinely check the responsible industries by documentation review as well as on-site counting to ensure that the fee is correctly submitted. The WRF provides initiatives to collect and dispose of the end-of-life products. The fund is split into a trust fund and a nonbusiness fund to deal with the collection, disposal, and treatment of the listed materials. The latter deals with the supporting works and ensures that the system runs effectively. The ratio of trust fund to nonbusiness fund is 80-20%. It is no doubt that the current practice achieves some improvements. Household waste has been reduced by 22%. And, most importantly, the benefit-to-cost ratio was as high as 1.24. However, similar to other state-owned systems, the resource recycling program has been criticized for false reporting from the responsible industries, a rigid system, and complicated procedures. To build a sustainable enterprise, the recycling program should be privatized as the recycling market and operating procedures are well established and fully mature.     

Using phytoremediation technologies to upgrade waste water treatment in Europe

Goal, Scope and Background One of the burning problems of our industrial society is the high consumption of water and the high demand for clean drinking water. Numerous approaches have been taken to reduce water consumption, but in the long run it seems only possible to recycle waste water into high quality water. It seems timely to discuss alternative water remediation technologies that are fit for industrial as well as less developed countries to ensure a high quality of drinking water throughout Europe. Main Features The present paper discusses a range of phytoremediation technologies to be applied in a modular approach to integrate and improve the performance of existing wastewater treatment, especially towards the emerging micro pollutants, i.e. organic chemicals and pharmaceuticals. This topic is of global relevance for the EU. Results Existing technologies for waste water treatment do not sufficiently address increasing pollution situation, especially with the growing use of organic pollutants in the private household and health sector. Although some crude chemical approaches exist, such as advanced oxidation steps, most waste water treatment plants will not be able to adopt them. The same is true for membrane technologies. Discussion Incredible progress has been made during recent years, thus providing us with membranes of longevity and stability and, at the same time, high filtration capacity. However, these systems are expensive and delicate in operation, so that the majority of communities will not be able to afford them. Combinations of different phytoremediation technologies seem to be most promising to solve this burning problem. Conclusions To quantify the occurrence and the distribution of micropollutants, to evaluate their effects, and to prevent them from passing through wastewater collection and treatment systems into rivers, lakes and ground water bodies represents an urgent task for applied environmental sciences in the coming years. Recommendations Public acceptance of green technologies is generally higher than that of industrial processes. The EU should stimulate research to upgrade existing waste water treatment by implementing phytoremediation modules and demonstrating their reliability to the public.     

Evaluating China’s regional energy and environmental efficiency by considering three internal parallel industries

With the rapid development of China’s economy, high energy consumption and high pollution emission have become serious problems. To solve these problems, many studies have been done to evaluate energy and environmental efficiency, as the results can provide valuable information to improve performance. However, the previous research mainly evaluates China’s regional energy and environmental efficiency by considering each region’s industry as a whole system, ignoring the internal structure. In reality, each region mainly includes three parallel types of industry: primary, secondary, and tertiary. Therefore, this paper provides a parallel data envelopment analysis (DEA) approach to evaluate China’s regional energy and environment efficiency by considering these parallel industrial systems. The following findings can be obtained based on the empirical results: (1) the overall energy efficiency of China is low, and the inefficiency of the economic system is mainly sourced from the lower energy and environmental performance of the primary industry and the tertiary industry. (2) the introduction of the environmental variable (CO₂) leads to the increase of some backward areas’ efficiencies. (3) the energy efficiency of each provincial region is different, and most of them have their own inefficient industries. (4) the total factor productivity of China is declining, mainly because of the decline of technical efficiency.

     

The Rhine red,the fish dead—the 1986 Schweizerhalle disaster,a retrospect and long-term impact assessment

Background

The November 1, 1986 fire at a Sandoz Ltd. storehouse at Schweizerhalle, an industrial area near Basel, Switzerland, resulted in chemical contamination of the environment. The storehouse, which was completely destroyed by the fire, contained pesticides, solvents, dyes, and various raw and intermediate materials. The majority of the approximately 1,250 t of stored chemicals was destroyed in the fire, but large quantities were introduced into the atmosphere, into the Rhine River through runoff of the fire-fighting water, and into the soil and groundwater at the site. The chemicals discharged into the Rhine caused massive kills of benthic organisms and fish, particularly eels and salmonids. Public and private reaction to the fire and subsequent chemical spill was very strong. This happened only a few months after the Chernobyl accident and it destroyed the myth of immunity of Switzerland regarding such catastrophes.

Aim

This article reviews the damaging events of November 1986 and aims at striking stock two decades later.

Results and discussion

In the aftermath of this once-per-century accident, the aim was to obtain new knowledge for the environmental sciences and to achieve progress for water pollution control issues. The following themes are discussed: mitigation measures by the chemical industry and by the governmental authorities, activities of environmental protection organizations, chemical and biological monitoring, alert organization, ecological damages, ecotoxicological effects assessment, recovery and alteration of the river biology, return of the salmon, drinking water supplies, research programs, education of environmental scientists, and visions for the future.

Conclusions

The catastrophic pollution of the Rhine in November 1986 has triggered by the openly visible damages of the river biology that subsequently significant progress was made towards the prevention of such environmental catastrophes. The crucial risk reduction measures in the chemical industry, legal regulations and controls as well as chemical and biological monitoring of the river water quality were substantially improved. Politics and chemical industry have learned their lectures and have proceeded accordingly.

Recommendations

A drastic acute contamination, as it has happened at Schweizerhalle in 1986, is clearly recognizable by the toxic effects, which it is causing. This can lead to mitigation activities, which are positive considering a long-term perspective. However, the less obvious effects of chronic water pollution should receive more attention as well as the ongoing alteration of the biocenosis. A high water quality must be demanded for using water from the Rhine to produce drinking water. In that context, micropollutants should also be considered and particular attention should be payed to emerging contaminants.

Perspectives

The big chemical storehouse fire of 1986 had an important impact on the transboundary cooperation and has improved the willingness for international cooperation. The fire catastrophe of Schweizerhalle has triggered many activities in particular for the Rhine River. Overall, the effects are positive on the basis of a long-term perspective. The applied whole basin approach gives an example on a global basis for other river systems, which still are more heavily polluted.

     

The role of biogeochemical hotspots,landscape heterogeneity,and hydrological connectivity for minimizing forestry effects on water quality

Protecting water quality in forested regions is increasingly important as pressures from land-use, long-range transport of air pollutants, and climate change intensify. Maintaining forest industry without jeopardizing sustainability of surface water quality therefore requires new tools and approaches. Here, we show how forest management can be optimized by incorporating landscape sensitivity and hydrological connectivity into a framework that promotes the protection of water quality. We discuss how this approach can be operationalized into a hydromapping tool to support forestry operations that minimize water quality impacts. We specifically focus on how hydromapping can be used to support three fundamental aspects of land management planning including how to (i) locate areas where different forestry practices can be conducted with minimal water quality impact; (ii) guide the off-road driving of forestry machines to minimize soil damage; and (iii) optimize the design of riparian buffer zones. While this work has a boreal perspective, these concepts and approaches have broad-scale applicability.     

Wet air oxidation and catalytic wet air oxidation for dyes degradation

Background, aim, and scope  

Textile industry produces wastewater which contributes to water pollution since it utilizes a lot of chemicals. Preliminary studies show that the wastewater from textile industries contains grease, wax, surfactant, and dyes. The objective of this study was to determine the treatment efficiency of the nickel catalysts supported on hydrotalcites in three-dye model compounds and two types of wastewater.     

Metal availability and soil toxicity after repeated croppings of Thlaspi caerulescens in metal contaminated soils

Metal phytoextraction with hyperaccumulating plants could be a useful method to decontaminate soils, but it is not fully validated yet. In order to quantify the efficiency of Cd and Zn extraction from a calcareous soil with and without Fe amendment and an acidic soil, we performed a pot experiment with three successive croppings of Thlaspi caerulescens followed by 3 months without plant and 7 weeks with lettuce. We used a combined approach to assess total extraction efficiency (2 M HNO3-extractable metals), changes in metal bio/availability (0.1 M NaNO3-extractable metals and lettuce uptake) and toxicity (lettuce biomass and the BIOMET biosensor). The soil solution was monitored over the whole experiment. In the calcareous soil large Cu concentrations were probably responsible for chlorosis symptoms observed on T. caerulescens. When this soil was treated with Fe, the amount of extracted metal by T. caerulescens increased and metal availability and soil toxicity decreased when compared to the untreated soil. In the acidic soil, T. caerulescens was most efficient: Cd and Zn concentrations in plants were in the range of hyperaccumulation and HNO3-extractable Cd and Zn, metal bio/availability, soil toxicity, and Cd and Zn concentrations in the soil solution decreased significantly. However, a reduced Cd concentration measured in the third T. caerulescens cropping indicated a decrease in metal availability below a critical threshold, whereas the increase of dissolved Cd and Zn concentrations after the third cropping may be the early sign of soil re-equilibration. This indicates that phytoextraction efficiency must be assessed by different approaches in order not to overlook any potential hazard and that an efficient phytoextraction scheme will have to take into account the different dynamics of the soil-plant system.     

Advances and perspective in bioremediation of polychlorinated biphenyl-contaminated soils

In recent years, microbial degradation and bioremediation approaches of polychlorinated biphenyls (PCBs) have been studied extensively considering their toxicity, carcinogenicity and persistency potential in the environment. In this direction, different catabolic enzymes have been identified and reported for biodegradation of different PCB congeners along with optimization of biological processes. A genome analysis of PCB-degrading bacteria has led in an improved understanding of their metabolic potential and adaptation to stressful conditions. However, many stones in this area are left unturned. For example, the role and diversity of uncultivable microbes in PCB degradation are still not fully understood. Improved knowledge and understanding on this front will open up new avenues for improved bioremediation technologies which will bring economic, environmental and societal benefits. This article highlights on recent advances in bioremediation of PCBs in soil. It is demonstrated that bioremediation is the most effective and innovative technology which includes biostimulation, bioaugmentation, phytoremediation and rhizoremediation and acts as a model solution for pollution abatement. More recently, transgenic plants and genetically modified microorganisms have proved to be revolutionary in the bioremediation of PCBs. Additionally, other important aspects such as pretreatment using chemical/physical agents for enhanced biodegradation are also addressed. Efforts have been made to identify challenges, research gaps and necessary approaches which in future, can be harnessed for successful use of bioremediation under field conditions. Emphases have been given on the quality/efficiency of bioremediation technology and its related cost which determines its ultimate acceptability.     

市政污泥深度脱水药剂优化研究简

污泥含水率高影响污泥后续处置。利用化学药剂对污泥进行深度脱水处理可使污泥减量化、稳定化。为提高深度脱水效果,对添加剂进行了种类和添加量的优化研究（石灰、工业石灰、粉煤灰、硅藻土、十二烷基磺酸钠和飞灰;5%、10%、15%、20%、25%和30%）,另外,还进行了复合投加实验。研究结果表明,石灰、工业石灰、粉煤灰的深度脱水效果最好;复合添加中,25%石灰+5%粉煤灰,20%石灰+10%粉煤灰,10%石灰+20%粉煤灰的深度脱水效果最好。5%的石灰或者工业石灰的添加剂量使干化污泥pH值达到12.25,粉煤灰、硅藻土、十二烷基磺酸钠和飞灰的添加对干化污泥pH值影响相对要小。     

Integrated Approaches to Natural Resources Management in Practice: The Catalyzing Role of National Adaptation Programmes for Action

The relationship of forests in water quantity and quality has been debated during the past years. At the same time, focus on climate change has increased interest in ecosystem restoration as a means for adaptation. Climate change might become one of the key drivers pushing integrated approaches for natural resources management into practice. The National Adaptation Programme of Action (NAPA) is an initiative agreed under the UN Framework Convention on Climate Change. An analysis was done to find out how widely ecosystem restoration and integrated approaches have been incorporated into NAPA priority adaptation projects. The data show that that the NAPAs can be seen as potentially important channel for operationalizing various integrated concepts. Key challenge is to implement the NAPA projects. The amount needed to implement the NAPA projects aiming at ecosystem restoration using integrated approaches presents only 0.7% of the money pledged in Copenhagen for climate change adaptation.     

Platitudes or Performance?

Industry, government, and the public have come a long way in establishing the dialogue that is necessary if the reservations each has had of the others’ motives are to be dispelled. However, each tends to fall into a routine of accusations, charges, counter charges, and rebuttals. This paper deals with the action which must be forthcoming from industry if good community relations are to be maintained and the public interest is to be served.     

燃煤炉窑烟气净化工艺及其装置的研究

在实验测试基础上,对燃煤烟气喷钙水浴复合脱硫工艺及设备进行了研究.实验表明,采用喷钙水浴复合脱硫工艺较单一喷钙或水浴具有更高的脱硫效果,且喷入的碳酸钙可得到充分利用.此外,还对钙硫比、喷钙方向及喷管插入水深等影响脱硫效率的因素进行了测试分析.     

Evaluation of approaches for terrestrial hazard classification

Hazard assessment is an essential element in the evaluation of the potential effects of chemical substances on the environment. To date, most work has focused on hazard assessment schemes for the aquatic environment, but in recent years, a number of proposals have been developed for other environmental compartments. Due to limited datasets, the suitability of the toxicity cut-off values in these schemes has not been fully determined and the practicalities associated with using these approaches have not been fully established. This study, which focused on the soil compartment, was performed to examine cut-off values proposed by two terrestrial hazard assessment schemes and establish the availability of data. Data on earthworms indicated that current proposals for toxicity cut-off values are appropriate. However, analysis of IUCLID (International Uniform ChemicaL Information Database) indicates that even for commonly used high production volume chemicals, insufficient data are available to enable classification. Whilst the necessary data may already be available for selected groups of substances (e.g. pesticides and veterinary medicines), a significant experimental testing programme would therefore be required before a terrestrial classification system could be applied widely. Such data may become available in the future as a result of initiatives such as REACH.     

The contribution of azo dyes to the mutagenic activity of the Cristais River

To verify whether dyes emitted within the discharge of a dye processing plant were contributing to the mutagenicity repeatedly found in the Cristais River, Sao Paulo, Brazil, we chemically characterized the following mutagenic samples: the treated industrial effluent, raw and treated water, and the sludge produced by a Drinking Water Treatment Plant (DWTP) located approximately 6 km from the industrial discharge. Considering that 20% of the dyes used for coloring activities might be lost to wastewaters and knowing that several dyes have mutagenic activity, we decided to analyze the samples for the presence of dyes. Thin layer chromatographic analysis indicated the presence of three prevalent dyes in all samples, except for the drinking water. This combination of dyes corresponded to a commercial product used by the industry, and it tested positive in the Salmonella assay. The structures of the dye components were determined using proton magnetic resonance and mass spectrometric (MS) methods, and the dyes were tested for mutagenicity. The blue component was identified as the C.I. Disperse Blue 373, the violet as C.I. Disperse Violet 93, and the orange as C.I. Disperse Orange 37. The dyes showed mutagenic responses of 6300, 4600, and 280 revertants/microg for YG1041 with S9 respectively. A bioassay-directed fractionation/chemical analysis showed that the C.I. Disperse Blue 373 contributed 55% of the mutagenic activity of the DWTP sludge. We showed that these dyes contributed to the mutagenic activity found in the Cristais River environmental samples analyzed and are indirectly affecting the quality of the related drinking water. Therefore, we believe that this type of discharge should be more thoroughly characterized chemically and toxicologically. Additionally, human and ecological risks associated with the release of dye processing plant effluents should be more fully investigated, especially where the resultant water is taken for human consumption.     

The impact of household food consumption on resource and energy management

How can private households contribute to a more resource-efficient food production system? The importance of meat consumption has previously been highlighted. Various life-cycle analysis studies suggest which products are favourable from an ecological point of view. This study uses a material flux analysis to assess material and energy fluxes of the entire system of food production and consumption. It compares different steps in production and consumption as well as different product categories. The results reveal that agricultural production and private households account for most of the system's energy requirements. The outcomes of two possible initiatives taken by private households are analysed by scenario calculation. It compares optimisation of technical devices in private households with purchase decisions that favour organically produced food products. The results reveal an astonishing optimisation potential of cooling devices in private households. However, it also shows the importance of specific parameters, such as the energy-mix coefficient.     

Bromide levels in natural waters: its relationship to levels of both chloride and total dissolved solids and the implications for water treatment

South Australian freshwaters from a wide variety of environments were analysed for bromide and the results correlated with both chloride and total dissolved solids (TDS) concentrations. A linear relationship was obtained which allows chloride data to be successfully used to estimate bromide concentrations. Bromide displayed a slightly better correlation with TDS indicating that an improved estimate of bromide could be made by reference to TDS data which is more easily and commonly obtained, and generally available extensively as historical data. The bromide content in relation to its ratio with both chloride and TDS contents was around seventy percent of the corresponding ratios found in seawater, a finding reported in other published data. The ability to estimate bromide concentrations is a potentially useful tool in the drinking water industry as it enables the assessment of the extent of bromate formation (predicted through the use of mathematical models and other water quality data) which is an important factor when ozonation is being considered as a treatment option, particularly as many water industry regulatory bodies have imposed stringent limits on the levels of acceptable bromate.     

Cotton-textile wastewater management: investigating different treatment methods

The cotton-textile industry consumes significant amounts of water during manufacturing, creating high volumes of wastewater needing treatment. The organic-load concentration of cotton-textile wastewater is equivalent to a medium-strength municipal wastewater; the color of the water, however, remains a significant environmental issue. This research, in cooperation with a cotton-textile manufacturer, investigated different treatment methods and different combinations of methods to identify the most cost-effective approaches to treating textile wastewater. Although activated-sludge is economical, it can only be used as part of an integrated wastewater management system because it cannot decolorize wastewater. Coagulation/flocculation methods are able to decolorize cotton-wastewater; however, this process creates high amounts of wastewater solids, thus significantly increasing total treatment costs. Chemical oxidation is an environmentally friendly technique that can only be used as a polishing step because of high operating costs. Anaerobic digestion in a series of fixed-bed bioreactors with immobilized methanogens using acetic acid as a substrate and a pH-control agent followed by activated-sludge treatment was found to be the most cost-effective and environmentally safe cotton-textile wastewater management approach investigated.     

Nontargeted evaluation of the fate of steroids during wastewater treatment by comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry

Emerging organic contaminants in wastewater are usually analyzed by targeted approaches, and especially estrogens have been the focus of environmental research due to their high hormonal activity. The selection of specific target compounds means, however, that most of the sample components, including transformation products and potential new contaminants, are neglected. In this study, the fate of steroidal compounds in wastewater treatment processes was evaluated by a nontargeted approach based on comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry. The potential of the nontargeted approach to generate comprehensive information about sample constituents was demonstrated with use of statistical tools. Transformation pathways of the tentatively identified compounds with steroidal four-ring structure were proposed. The purification efficiency of the wastewater treatment plants was studied, and the distribution of the compounds of interest in the suspended solids, effluent water, and sludge was measured. The results showed that, owing to strong adsorption of hydrophobic compounds onto the solid matter, the steroids were mostly bound to the suspended solids of the effluent water and the sewage sludge at the end of the treatment process. The most abundant steroid class was androstanes in the aqueous phase and cholestanes in the solid phase. 17β-estradiol was the most abundant estrogen in the aqueous phase, but it was only detected in the influent samples indicating efficient removal during the treatment process. In the sludge samples, however, high concentrations of an oxidation product of 17β-estradiol, estrone, were measured.     

中国南方某城市自来水厂处理工艺对多环芳烃的去除效果研究

讨论了中国南方某城市自来水厂饮用水中的多环芳烃残留规律以及现有净水工艺对多环芳烃的去除效果。研究结果表明,该自来水厂饮用水中检出多环芳烃以2~4环芳烃为主,强致癌性高环数多环芳烃均在检出限以下,且多环芳烃总量未超出中国供水行业标准(2000年)的相关限值。各处理工艺段中,砂滤过程对多环芳烃的去除效果最好,相较于原水对多环芳烃总量的去除率可达64%。     

A differentiated assessment of the future of biotechnology a perspective from an eu member state

Summary  I would like to stress that the research and development interests and programs, as well as the basic economic expectations to biotechnology, seem to be quite similar for the EU and the USA. However, with a sensitive public and a smaller structured, agricultural structure, the EU approach seems to be more cautious, based on the precautionary principle which is explicitly mentioned in various EU regulations [see e.g. 11], and taking into account the level of uncertainty with GMOs. Biotechnology is more than applying GMOs in industry or agriculture, it is a huge variety of methods and techniques waiting to be assessed and implemented, provided they are safe and useful. In addition, the remaining questions concerning the risk/safety of GMO products have to be fully assessed [12-14].