Trends and problems of solid waste management in developing countries: a case study in seven Palestinian districts

There is a great interest in solving problems related to municipal solid waste (MSW) management in the Palestinian territory. However, few studies have been done to assess the extent of these problems and suggest the best alternative solutions. This study aims at assessing MSW conditions in the seven major districts in northern West Bank, Palestinian territory. The study focuses on comparing several MSW management elements (such as collection, budget, and disposal) in municipalities, village councils, and refugee camps in the studied districts and the problems faced by these institutions in handling the waste. It also provides information on MSW collection service availability and waste disposal practices in the districts studied. It was found that, although MSW collection service was available for 98% of the residents in the areas surveyed, no proper treatment or landfill procedure was followed for the collected waste in most of these areas. Instead, waste burning in open dumpsites was the most common practice. Moreover, due to inefficient collection of waste disposal fees from the residents, municipalities were forced to sometimes cut the collection service and reduce its labor force, especially in villages. The budget for MSW management was between 2% and 8% of the total budget of the municipalities studied, indicating a low priority for this issue.     

Inconsistent pathways of household waste

The aim of this study was to provide policy-makers and waste management planners with information about how recycling programs affect the quantities of specific materials recycled and disposed of. Two questions were addressed: which factors influence household waste generation and pathways? and how reliable are official waste data? Household waste flows were studied in 35 Swedish municipalities, and a wide variation in the amount of waste per capita was observed. When evaluating the effect of different waste collection policies, it was found to be important to identify site-specific factors influencing waste generation. Eleven municipal variables were investigated in an attempt to explain the variation. The amount of household waste per resident was higher in populous municipalities and when net commuting was positive. Property-close collection of dry recyclables led to increased delivery of sorted metal, plastic and paper packaging. No difference was seen in the amount of separated recyclables per capita when weight-based billing for the collection of residual waste was applied, but the amount of residual waste was lower. Sixteen sources of error in official waste statistics were identified and the results of the study emphasize the importance of reliable waste generation and composition data to underpin waste management policies.     

From mixed to separate collection of solid waste: Benefits for the town of Zavidovići (Bosnia and Herzegovina)

In Bosnia and Herzegovina only 50% of the municipalities have a well-organized service for (mixed) waste collection and disposal. Illegal dumping is very common, in particular in rural areas, which are not regularly served by any service of collection. This situation leads to serious risks for public health and has dangerous environmental impacts. In Zavidovi?i the municipality is trying to meet high standards in the delivery of services of waste collection, but is constrained by scarce financial and technical resources. Different scenarios for the implementation of a system of separate collection in Zavidovi?i were elaborated in order to provide a useful tool for decision making by comparing costs and environmental & economic benefits of each scenario. Six scenarios were considered, based on different recovery rates for plastic, paper & cardboard, and metals. Benefits resulting from the implementation of each of the proposed scenarios are compared in terms of savings of landfill volume and costs. The study concludes that the adoption of a system of separate collection could generate positive impacts on all the stakeholders involved in the solid waste management sector in Zavidovi?i and could contribute to the compliance of European standards in many Central and Eastern European countries as established by a number of national environmental protection strategies.     

Solid waste management practices and review of recovery and recycling operations in Turkey

This paper provides a general overview of solid waste data and management practices employed in Turkey during the last decade. Municipal solid waste statistics and management practices including waste recovery and recycling initiatives have been evaluated. Detailed data on solid waste management practices including collection, recovery and disposal, together with the results of cost analyses, have been presented. Based on these evaluations basic cost estimations on collection and sorting of recyclable solid waste in Turkey have been provided. The results indicate that the household solid waste generation in Turkey, per capita, is around 0.6 kg/year, whereas municipal solid waste generation is close to 1 kg/year. The major constituents of municipal solid waste are organic in nature and approximately 1/4 of municipal solid waste is recyclable. Separate collection programmes for recyclable household waste by more than 60 municipalities, continuing in excess of 3 years, demonstrate solid evidence for public acceptance and continuing support from the citizens. Opinion polls indicate that more than 80% of the population in the project regions is ready and willing to participate in separate collection programmes. The analysis of output data of the Material Recovery Facilities shows that, although paper, including cardboard, is the main constituent, the composition of recyclable waste varies strongly by the source or the type of collection point.     

GIS-based modelling for the estimation of municipal solid waste generation and collection

In the present paper, an innovative model for the estimation of municipal solid waste generation and collection is proposed. This model is part of an extended solid waste management system and uses a spatial Geodatabase, integrated in a GIS environment. It takes into consideration several parameters of waste generation, such as population density, commercial activities, road characteristics and their influence on the location and allocation of waste bins. Ground-based analysis was applied for the estimation of the inter-relations between the aforementioned factors and the variations in waste generation between residential and commercial areas. Therefore, the proposed model follows a unified categorization approach for residential and commercial activities and focuses on the dominant factors that determine waste generation in the area under study. The most important result of the research work presented in the current paper is an accurate estimation of the optimal number of waste bins and their allocation. A new methodology and an appropriate algorithm have been developed for this purpose in order to facilitate routing and waste collection. By using these results, municipalities aware of social, economical and environmental factors, related to waste management, can achieve optimal usage of their resources and offer the best possible services to their citizens.     

Charging systems and PAYT experiences for waste management in Spain

Municipal waste charges in Spain are very widespread, although their application varies significantly among different municipalities. Most commonly, waste charges are implemented as a flat rate, but some of them depend on indicators such as household water consumption, the land area of the property or the value of the real estate. Only one residential pay-as-you-throw scheme has been applied so far. It was a pay-per-bag scheme implemented in Torrelles de Llobregat, Barcelona. A number of other systems focussing only on commercial waste have been implemented in Spain. Several factors suggest that new pay-as-you-throw schemes will be adopted in the near future. In 2000 no municipalities had door-to-door collection schemes; since then over 70 municipalities have implemented them. In addition to this, some regions encourage the separate collection of commercial waste, by means of doorstep schemes. In all of these areas, variable charging systems could be easily adopted. Additionally, regarding waste charges, the National Waste Plan (2000-2006) advocated for the implementation of "pilot experiences for the quantitative application of the polluter-pays-principle". The tendency towards these variable charging systems in Europe will also favour their introduction in Spain.     

Comparison of different collection systems for sorted household waste in Sweden

Composition and quantity per person of municipal solid waste (MSW) have been analyzed in six municipalities in southern Sweden with similar socio-economic conditions but with different collection systems. Samples of residual waste have been sorted, classified and weighed in 21 categories during 26 analyses that took place from 1998-2004. Collection data of the total waste flow, including source sorted recycling materials, in the same area have been compiled and compared. Multivariate data analyses have been applied. Weight-based billing reduced delivered amounts of residual household waste by 50%, but it is unknown to what extent improper material paths had developed. With curbside collection more metal, plastic and paper packaging was separated and left to recycling. When separate collection of biodegradables was included in the curbside system, the overall sorting of dry recyclables increased. The large uncertainty associated with waste composition analyses makes it difficult to draw strong conclusions regarding the effects on specific recyclables or the changes in the composition of the residual waste.     

Pay as you throw: Strengths and weaknesses of weight-based billing in household waste collection systems in Sweden

Householders’ response to weight-based billing for the collection of household waste was investigated with the aim of providing decision support for waste management policies. Three questions were addressed: How much and what kind of information on weight-based billing is discernible in generic Swedish waste collection statistics? Why do local authorities implement weight-based billing, and how do they perceive the results? and, Which strengths and weaknesses of weight-based billing have been observed on the local level? The study showed that municipalities with pay-by-weight schemes collected 20% less household waste per capita than other municipalities. Surprisingly, no part of this difference could be explained by higher recycling rates. Nevertheless, the majority of waste management professionals were convinced that recycling had increased as a result of the billing system. A number of contradicting strengths and weaknesses of weight-based billing were revealed.     

Potential use of feebate systems to foster environmentally sound urban waste management

Waste treatment facilities are often shared among different municipalities as a means of managing wastes more efficiently. Usually, management costs are assigned to each municipality depending on the size of the population or total amount of waste produced, regardless of important environmental aspects such as per capita waste generation or achievements in composting or recycling. This paper presents a feebate (fee+rebate) system aimed to foster urban waste reduction and recovery. The proposal suggests that municipalities achieving better results in their waste management performance (from an ecological viewpoint) be recompensated with a rebate obtained from a fee charged to those municipalities that are less environmentally sound. This is a dynamic and flexible instrument that would positively encourage municipalities to reduce waste whilst increasing the recycling.     

Wasteful waste-reducing policies? The impact of waste reduction policy instruments on collection and processing costs of municipal solid waste

We study the impact of some local policies aimed at municipal solid waste (MSW) reduction on the cost efficiency of MSW collection and disposal. We explicitly account for differences between municipalities in background conditions by using a bootstrapped version of the Data Envelopment Analysis methodology in combination with a matching technique. Using data on 299 municipalities in Flanders, Belgium, for the year 2003, our results indicate that municipalities that are member of a waste collection joint venture, or that subscribe to a voluntary agreement to reduce MSW at the highest ambition level, collect and process MSW more efficiently than other municipalities. Weekly instead of two-weekly waste collection, or using a weight-based pricing system appears to have no impact on efficiency. Our results show that aiming at MSW reduction does not lead to lower efficiency of public service provision, even on the contrary.     

Medical waste management in China: A case study of Nanjing

Medical waste management is of great importance due to its infectious and hazardous nature that can cause undesirable effects on humans and the environment. The objective of this study was to analyze and evaluate the present status of medical waste management in the light of medical waste control regulations in Nanjing. A comprehensive inspection survey was conducted for 15 hospitals, 3 disposal companies and 200 patients. Field visits and a questionnaire survey method were implemented to collect information regarding different medical waste management aspects, including medical waste generation, segregation and collection, storage, training and education, transportation, disposal, and public awareness.The results indicated that the medical waste generation rate ranges from 0.5 to 0.8 kg/bed day with a weighted average of 0.68 kg/bed day. The segregated collection of various types of medical waste has been conducted in 73% of the hospitals, but 20% of the hospitals still use unqualified staff for medical waste collection, and 93.3% of the hospitals have temporary storage areas. Additionally, 93.3% of the hospitals have provided training for staff; however, only 20% of the hospitals have ongoing training and education. It was found that the centralized disposal system has been constructed based on incineration technology, and the disposal cost of medical waste is about 580 US$/ton. The results also suggested that there is not sufficient public understanding of medical waste management, and 77% of respondents think medical waste management is an important factor in selecting hospital services.The problematic areas of medical waste management in Nanjing are addressed by proposing some recommendations that will ensure that potential health and environmental risks of medical waste are minimized.     

Municipal solid waste generation in municipalities: quantifying impacts of household structure, commercial waste and domestic fuel

Waste management planning requires reliable data concerning waste generation, influencing factors on waste generation and forecasts of waste quantities based on facts. This paper aims at identifying and quantifying differences between different municipalities' municipal solid waste (MSW) collection quantities based on data from waste management and on socio-economic indicators. A large set of 116 indicators from 542 municipalities in the Province of Styria was investigated. The resulting regression model included municipal tax revenue per capita, household size and the percentage of buildings with solid fuel heating systems. The model explains 74.3% of the MSW variation and the model assumptions are met. Other factors such as tourism, home composting or age distribution of the population did not significantly improve the model. According to the model, 21% of MSW collected in Styria was commercial waste and 18% of the generated MSW was burned in domestic heating systems. While the percentage of commercial waste is consistent with literature data, practically no literature data are available for the quantity of MSW burned, which seems to be overestimated by the model. The resulting regression model was used as basis for a waste prognosis model (Beigl and Lebersorger, in preparation).     

Municipal solid waste management in Africa: strategies and livelihoods in Yaoundé, Cameroon

This paper provides an overview of the state of municipal solid waste (MSW) management in the capital of Cameroon, Yaoundé, and suggests some possible solutions for its improvement. The institutional, financial, and physical aspects of MSW management, as well as the livelihoods of the population, were analyzed. Our study revealed that distances and lack of infrastructure have a major impact on waste collection. Garbage bins are systematically mentioned as the primary infrastructure needed by the population in all quarters, whether it be a high or low standard community. The construction of transfer stations and the installation of garbage bins are suggested as a solution to reduce distances between households and garbage bins, thus improving waste collection vehicle accessibility. Transfer stations and garbage bins would enable the official waste collection company to expand its range of services and significantly improve waste collection rates. Several transfer stations have already been set up by non-governmental organizations (NGOs) and community-based organizations (CBOs), but they require technical, institutional and funding support. Research is needed on the quality and safety of community-made compost, as well as on soil fertility in urban and peri-urban areas. Most of the stakeholders, municipalities, the official waste collection company and households acknowledge the need for better monitoring and regulation of MSW management. The urban community of Yaoundé also needs to maintain its support of MSW management and promote the sustainability of NGOs and CBOs operating in underserved areas not yet covered by adequate infrastructures. A major opportunity for implementation of such waste policy is the heavily indebted poor countries (HIPC) program dedicated to urban planning and good governance.     

Municipal solid waste management in the Southern Province of Sri Lanka: problems, issues and challenges

This paper describes the problems, issues and challenges faced by Sri Lanka based on the outcome of a recent study conducted in the country's Southern Province. The study consists of a public survey, discussions with local authority staff involved in waste management, discussions with Provincial Council and Government officials, dialogue with local politicians, review of documents and field observations. The study revealed that only 24% of the households have access to waste collection and that in rural areas it was less than 2%. A substantial number of households in areas without waste collection expect local authorities to collect their waste. The study also showed that most sites in the province are under capacity to handle any increased demand. Urgent and immediate improvement of the waste disposal sites is necessary to meet the current demand for improved waste collection. The study also revealed that there is a high willingness of people for home composting.     

Property-close source separation of hazardous waste and waste electrical and electronic equipment--a Swedish case study

Through an agreement with EEE producers, Swedish municipalities are responsible for collection of hazardous waste and waste electrical and electronic equipment (WEEE). In most Swedish municipalities, collection of these waste fractions is concentrated to waste recycling centres where households can source-separate and deposit hazardous waste and WEEE free of charge. However, the centres are often located on the outskirts of city centres and cars are needed in order to use the facilities in most cases. A full-scale experiment was performed in a residential area in southern Sweden to evaluate effects of a system for property-close source separation of hazardous waste and WEEE. After the system was introduced, results show a clear reduction in the amount of hazardous waste and WEEE disposed of incorrectly amongst residual waste or dry recyclables. The systems resulted in a source separation ratio of 70 wt% for hazardous waste and 76 wt% in the case of WEEE. Results show that households in the study area were willing to increase source separation of hazardous waste and WEEE when accessibility was improved and that this and similar collection systems can play an important role in building up increasingly sustainable solid waste management systems.     

A Comparison Of Collection Systems In European Cities

A 1989 survey compares the conceptual and technical approaches to the collection of municipal solid waste, secondary materials and household hazardous wastes in eight major European cities. The collection systems reflect local structural conditions as well as the different political tasks of municipal waste management. The traditional focus on collection and treatment has been enlarged by separate collection and public education, and economic considerations are of increasing importance.     

Generation, storage, collection and transportation of municipal solid waste--a case study in the city of Kathmandu, capital of Nepal

Solid waste management (SWM) services have consistently failed to keep up with the vast amount of solid waste produced in urban areas. There is not currently an efficient system in place for the management, storage, collection, and transportation of solid waste. Kathmandu City, an important urban center of South Asia, is no exception. In Kathmandu Metropolitan City, solid waste generation is predicted to be 1091 m(3)/d (245 tons/day) and 1155 m(3)/d (260 tons/day) for the years 2005 and 2006, respectively. The majority (89%) of households in Kathmandu Metropolitan City are willing to segregate the organic and non-organic portions of their waste. Overall collection efficiency was 94% in 2003. An increase in waste collection occurred due to private sector involvement, the shutdown of the second transfer station near the airport due to local protest, a lack of funding to maintain trucks/equipment, a huge increase in plastic waste, and the willingness of people to separate their waste into separate bins. Despite a substantial increase in total expenditure, no additional investments were made to the existing development plan to introduce a modern disposal system due to insufficient funding. Due to the lack of a proper lining, raw solid waste from the existing dumping site comes in contact with river water directly, causing severe river contamination and deteriorating the quality of the water.     

Is there a difference between urban and rural areas in the disposal of home medical care waste? 13 years of nation-wide repeated cross-sectional study in Japan

Home medical care (HMC) is advancing not only in Japan but also throughout the world. In Japan, HMC waste is legally classified as municipal waste. Nevertheless, some municipalities do not collect some or all the HMC waste because of fear of infection. Therefore, this study was conducted to clarify the following two issues: First, have the municipalities made progress in collecting and appropriate disposal of HMC waste in the past 13 years? Second, is there a difference between a large city and a small city in terms of appropriate disposal progress? A total of 687 municipalities published the treatment of HMC waste. Currently, 42 municipalities collected all HMC waste. 236 municipalities were collecting HMC waste except for self-injection needle. 117 municipalities were collecting HMC waste except for self-injection needle and Syringe. The collection status of HMC waste was better in cities with high population than in cities with low population. HMC waste collection status was progressed over 13 years. However, more than 60% of the municipality staff stated that they could not avoid being anxious about infection caused by HMC waste. We suggest that providing HMC waste education to the municipalities wherein these efforts have not yet progressed is important.

     

The performance of Spanish solid waste collection

In this paper we examine street cleaning and waste collection services in Spanish municipalities with a population exceeding 50,000. The purpose is to identify factors that influence the efficiency of these services. Three input variables (staff, vehicles and containers) and four outputs variables (tonnage, collection points, collection point density and kilometres of surface area washing) are analyzed using an analytical model based on Data Envelopment Analysis (DEA) methodology. These variables, along with non-controllable input variable (Tourist Index), were chosen because they were shown, based on a Tobit regression analysis, to have a statistically significant impact on municipality behaviour. The results obtained show that scale inefficiency was lower than pure technical efficiency, the latter is linked to service management. It was observed that the street-cleaning activity was performed more inefficiently than that of waste collection. Furthermore, it was detected that municipalities can reduce the resources used in rendering this service by 8%. Finally, an estimation using the Mann-Whitney test allows us to conclude that there is no difference between the inefficiencies observed in municipalities managed directly by town councils and those which have been transferred to private companies.     

Quantification of greenhouse gas emissions from waste management processes for municipalities--a comparative review focusing on Africa

The amount of greenhouse gases (GHG) emitted due to waste management in the cities of developing countries is predicted to rise considerably in the near future; however, these countries have a series of problems in accounting and reporting these gases. Some of these problems are related to the status quo of waste management in the developing world and some to the lack of a coherent framework for accounting and reporting of greenhouse gases from waste at municipal level. This review summarizes and compares GHG emissions from individual waste management processes which make up a municipal waste management system, with an emphasis on developing countries and, in particular, Africa. It should be seen as a first step towards developing a more holistic GHG accounting model for municipalities. The comparison between these emissions from developed and developing countries at process level, reveals that there is agreement on the magnitude of the emissions expected from each process (generation of waste, collection and transport, disposal and recycling). The highest GHG savings are achieved through recycling, and these savings would be even higher in developing countries which rely on coal for energy production (e.g. South Africa, India and China) and where non-motorized collection and transport is used. The highest emissions are due to the methane released by dumpsites and landfills, and these emissions are predicted to increase significantly, unless more of the methane is captured and either flared or used for energy generation. The clean development mechanism (CDM) projects implemented in the developing world have made some progress in this field; however, African countries lag behind.