Municipal solid waste management in India: From waste disposal to recovery of resources?

Unlike that of western countries, the solid waste of Asian cities is often comprised of 70-80% organic matter, dirt and dust. Composting is considered to be the best option to deal with the waste generated. Composting helps reduce the waste transported to and disposed of in landfills. During the course of the research, the author learned that several developing countries established large-scale composting plants that eventually failed for various reasons. The main flaw that led to the unsuccessful establishment of the plants was the lack of application of simple scientific methods to select the material to be composted. Landfills have also been widely unsuccessful in countries like India because the landfill sites have a very limited time frame of usage. The population of the developing countries is another factor that detrimentally impacts the function of landfill sites. As the population keeps increasing, the garbage quantity also increases, which, in turn, exhausts the landfill sites. Landfills are also becoming increasingly expensive because of the rising costs of construction and operation. Incineration, which can greatly reduce the amount of incoming municipal solid waste, is the second most common method for disposal in developed countries. However, incinerator ash may contain hazardous materials including heavy metals and organic compounds such as dioxins, etc. Recycling plays a large role in solid waste management, especially in cities in developing countries. None of the three methods mentioned here are free from problems. The aim of this study is thus to compare the three methods, keeping in mind the costs that would be incurred by the respective governments, and identify the most economical and best option possible to combat the waste disposal problem.     

Physical–chemical processes of sustainable materials’ production from hazardous toner waste,galvanic glass waste and spent foundry sand

Journal of Material Cycles and Waste Management - Several sustainable white ceramic composites were prepared from 3 to 7 wt.% of hazardous toner waste, 30–40% of spent foundry sand,...     

Quantification of solid waste management system efficiency using input–output indices

Journal of Material Cycles and Waste Management - The assessment of solid waste management systems is vital for continued improvement in the efficiency of waste management systems (WMSs). Many...     

Municipal solid waste management—An example of a partnership between five municipalities

Throughout the 1970s and 1980s many joint municipal partnerships were established in Denmark to take responsibility for the planning and handling of waste on behalf of municipalities in the partnership. RENO SYD is a typical joint municipal partnership, established to handle the municipal solid waste of five municipalities with a total of 65,000 inhabitants. The paper reviews the by-laws and organization of RENO SYD; the facility financing ownership or leasing; the collection of the various waste types; the reception at recycling cites; the refuse treatment, energy recovery, waste separation, treatment and landfill disposal; recycling; and economics, including tipping fees and taxation.     

Cost–benefit analysis of waste reduction in developing countries: a simulation

Waste reduction activities such as recycling, composting, and pig feeding in Peru and other developing countries are mainly informal but already reduce about 15 % of waste generation. Although much research on informal recycling in Latin America recommends partnership with current waste pickers, there is a lack of methodologies on how to systematize these activities. This paper proposes a mathematical model that calculates yields and costs of separate waste collection, and analyzes and measures the effect of improvements such as source separation by residents and location of recycling and composting centers. The analysis finds that the largest effect comes from source separation. In this case, separate collection yield can be increased from the current 30 kg/waste picker/day to about 200 kg/waste picker/day, and the cost can be reduced from 110 US$/t to 20 US$/t. These changes affect the profitability of the recycling and composting business. The environmental and social effects of these improvements are also discussed.     

Emission of trace organics from municipal solid waste incinerators—rationale of national guidelines in the Federal Republic of Germany

In the Federal Republic of Germany a working party has developed recommendations for dealing with the dioxin problems posed by waste incineration. According to these recommendations limit values for dioxin emissions are neither necessary nor practical. However, from the point of view of preventive environmental protection, dioxin emissions should be further reduced as far as is possible with present-day technology. The TA Luft (Technical Instructions for Maintaining Air Quality) contains stipulations and advice on this. The most significant of the solid residues from waste incinerators are the filter ashes as they have a high dioxin content. The working party of Under (states) has compiled a catalogue of recommendations for the disposal of filter ashes. The transport of solid residues from solid waste incinerators is controlled under the Abfallgesetz (Waste Act) and regulations passed in connection with this act and under the Gefahrgutverordnung Strasse—GGVS (Regulation on the transport of dangerous freight by road). The latter stipulates at what level of dioxin certain transport conditions must be respected. The new Gefahrstoffverordnung-GefStoffV (Regulation on dangerous substances) prohibits substances containing dioxin in concentrations above a certain level from being placed on the market. It does not apply to residues from solid waste incinerators.     

Waste incineration—An important element of the integrated waste management system in Germany

This paper describes the present situation of waste incineration in Europe and discusses the problems faced in the future when the Directives of the European Community will be implemented on waste management. As an example, the status of thermal waste treatment in Germany is dealt with in detail. A point addressed is that public acceptance of incineration can only be increased if the public is aware of the conditions governing waste avoidance and recycling and if these conditions are actually realized. This means, prior to incineration, recyclable or compostable materials should be separated, and only then can the remaining amounts of wastes be treated before being deposited. The main aim of the treatment process is to reduce the hazard potential posed by waste and to meet the landfill requirements laid down in the German Technical Instructions for Municipal Waste.     

Chemical-mineralogical characterization of C&D waste recycled aggregates from São Paulo, Brazil

This study presents a methodology for the characterization of construction and demolition (C&;D) waste recycled aggregates based on a combination of analytical techniques (X-ray fluorescence (XRF), soluble ions, semi-quantitative X-ray diffraction (XRD), thermogravimetric analysis (TGA-DTG) and hydrochloric acid (HCl) selective dissolution). These combined analytical techniques allow for the estimation of the amount of cement paste, its most important hydrated and carbonated phases, as well as the amount of clay and micas. Details of the methodology are presented here and the results of three representative C&;D samples taken from the São Paulo region in Brazil are discussed. Chemical compositions of mixed C&;D aggregate samples have mostly been influenced by particle size rather than the visual classification of C&;D into red or grey and geographical origin. The amount of measured soluble salts in C&;D aggregates (0.15–25.4 mm) is lower than the usual limits for mortar and concrete production. The content of porous cement paste in the C&;D aggregates is around 19.3% (w/w). However, this content is significantly lower than the 43% detected for the C&;D powders (<0.15 mm). The clay content of the powders was also high, potentially resulting from soil intermixed with the C&;D waste, as well as poorly burnt red ceramic. Since only about 50% of the measured CaO is combined with CO₂, the powders have potential use as raw materials for the cement industry.     

Assessing the implementation effect of Shanghai’s compulsory municipal solid waste classification policy

Journal of Material Cycles and Waste Management - Waste treatment is a problem faced by cities all over the world. In recent years, China, as a developing country, regards the municipal solid waste...     

Influence of regulation on the productivity of waste utilities. What can we learn with the Portuguese experience?

This paper examines the merits and the perverse effects of quality of service regulation in the performance of urban waste services when implemented alone and compares the performance of different economic regulatory methods. By means of a productivity analysis, we investigate the influence of a five-year period of regulation on the performance of Portuguese urban waste utilities using an unbalanced panel data for the period 2001-2008. Different non-parametric methods were applied to estimate the productivity change, all leading to similar outcomes. We observed a tendency of productivity decline in the urban waste utilities and concluded that in spite of the unequivocal improvements in the quality of service induced by sunshine regulation, more should be done as far as economic regulation is concerned. We also found that the use of sunshine regulation together with low incentive economic regulatory methods is not positive, leading to overinvestment rather than to value for money.     

Assessment of the environmental impact of management measures for the biodegradable fraction of municipal solid waste in São Paulo City

There is increasing concern about landfilling of biodegradable wastes. Therefore, biological treatment processes such as composting and biogasification have been considered as alternative strategies for managing those wastes. In this work, life cycle assessment was employed to compare the environmental impacts of landfilling, composting, and biological treatment of municipal solid waste in S?o Paulo City, Brazil. Energy consumption, recovered resources, and emissions to air and water were quantified and analyzed in terms of their potential contribution to global warming, acidification, and nutrient enrichment impact. The results demonstrated that processes that require high levels of energy consumption, such as wastewater treatment, play an important role in the outcome of environmental impact potentials. It was found that the landfilling of all waste is generally the worst strategy from an environmental point of view. However, significant reductions in the resulting impacts can be accomplished through biogasification and composting of the biodegradable fraction. Regarding composting, the application of a biofilter for gas treatment reduced significantly the gaseous emissions.     

CO₂ emission factors for waste incineration: Influence from source separation of recyclable materials

CO₂-loads from combustible waste are important inputs for national CO₂ inventories and life-cycle assessments (LCA). CO₂ emissions from waste incinerators are often expressed by emission factors in kg fossil CO₂ emitted per GJ energy content of the waste. Various studies have shown considerable variations between emission factors for different incinerators, but the background for these variations has not been thoroughly examined. One important reason may be variations in collection of recyclable materials as source separation alters the composition of the residual waste incinerated. The objective of this study was to quantify the importance of source separation for determination of emission factors for incineration of residual household waste. This was done by mimicking various source separation scenarios and based on waste composition data calculating resulting emission factors for residual waste routed to incineration. Emission factors ranged from 27 to 40 kg CO₂/GJ. The results appeared most sensitive towards variations in waste composition and water content. Recycling rates and lower heating values could not be used as simple indicators of the resulting emission factors for residual household waste; however the fossil carbon ratio of the waste after source separation was found to be appropriately correlated with the emission factor. Based on the results, it is recommended to carefully evaluate the source separation and collection systems behind reported literature values when comparing different studies and when using the values for environmental assessment purposes.     

Obtaining and characterization of catalytic materials from waste tires for the Fischer–Tropsch process

Journal of Material Cycles and Waste Management - In this contribution, the preparation of iron-based catalysts from waste tires is reported. Waste steel from disused tires was used as feedstock to...     

Nonisothermal pyrolysis kinetics of waste printed circuit boards and product characterization using TG–MS

Journal of Material Cycles and Waste Management - With characteristics of high resources, complex composition, and high toxicity, the treatment and disposal of waste printed circuit boards (WPCBs)...     

The effect of moisture regimes on the anaerobic degradation of municipal solid waste from Metepec (México)

The State of México, situated in central México, has a population of about 14 million, distributed in approximately 125 counties. Solid waste management represents a serious and ongoing pressure to local authorities. The final disposal site ("El Socavón") does not comply with minimum environmental requirements as no liners or leachate management infrastructure are available. Consequently, leachate composition or the effects of rain water input on municipal solid waste degradation are largely unknown. The aim of this work was to monitor the anaerobic degradation of municipal solid waste (MSW), simulating the water addition due to rainfall, under two different moisture content regimes (70% and 80% humidity). The study was carried out using bioreactors in both laboratory and pilot scales. The variation of organic matter and pH was followed in the solid matrix of the MSW. The leachate produced was used to estimate the field capacity of the MSW and to determine the pH, COD, BOD and heavy metals. Some leachate parameters were found to be within permitted limits, but further research is needed in order to analyze the leachate from lower layers of the disposal site ("El Socavón").     

Paper waste – Recycling,incineration or landfilling? A review of existing life cycle assessments

A review of existing life cycle assessments (LCAs) on paper and cardboard waste has been undertaken. The objectives of the review were threefold. Firstly, to see whether a consistent message comes out of published LCA literature on optimum disposal or recycling solutions for this waste type. Such message has implications for current policy formulation on material recycling and disposal in the EU. Secondly, to identify key methodological issues of paper waste management LCAs, and enlighten the influence of such issues on the conclusions of the LCA studies. Thirdly, in light of the analysis made, to discuss whether it is at all valid to use the LCA methodology in its current development state to guide policy decisions on paper waste. A total of nine LCA studies containing altogether 73 scenarios were selected from a thorough, international literature search. The selected studies are LCAs including comparisons of different management options for waste paper. Despite claims of inconsistency, the LCAs reviewed illustrate the environmental benefits in recycling over incineration or landfill options, for paper and cardboard waste. This broad consensus was found despite differences in geographic location and definitions of the paper recycling/disposal systems studied. A systematic exploration of the LCA studies showed, however, important methodological pitfalls and sources of error, mainly concerning differences in the definition of the system boundaries. Fifteen key assumptions were identified that cover the three paper cycle system areas: raw materials and forestry, paper production, and disposal/recovery. It was found that the outcome of the individual LCA studies largely depended on the choices made in some of these assumptions, most specifically the ones concerning energy use and generation, and forestry.