我国电子垃圾回收存在的问题与解决途径

介绍了我国电子垃圾回收利用存在的问题与现状、国外可供借鉴的经验,以及电子垃圾分类情况,最后提出我国电子垃圾再生利用的产业化发展方向。     

Environmental contamination from electronic waste recycling at Guiyu, southeast China

The disposal, recycling, and part salvaging of discarded electronic devices such as computers, printers, televisions, and toys are now creating a new set of waste problems. This study is aimed at identifying the sources and quantifying the pollution levels generated from electronic waste (e-waste) activities at Guiyu, Guangdong Province, China, and their potential impacts on the environment and human health. The preliminary results indicate that total polycyclic aromatic hydrocarbons (PAHs) in soil obtained from a printer roller dump site was 593 μg/kg dry weight (dry wt.) and in sediment from a duck pond, the PAH concentration was 514 μg/kg (dry wt.). Sediment from the Lianjiang River was found to be contaminated by polychlorinated biphenyls (743 μg/kg) at a level approaching three times the Canadian Environmental Quality Guidelines probable effect level of 277 μg/kg. Total mono- to hepta-brominated diphenyl ether homologue concentrations (1140 and 1169 μg/kg dry wt.) in soils near dumping sites were approximately 10–60 times those reported for other polybrominated diphenyl ether-contaminated locations in the world. In-house study on the open burning of cable wires showed extremely high levels of polychlorinated dibenzo-p-dioxins and dibenzofurans resulting in 12419 ng toxic equivalents (TEQ)/kg of waste input and 15 610 ng TEQ/kg for two separate tests, respectively, which were about three orders of magnitude higher than those for the open burning of household waste. High levels of Cu (712, 528, and 496 mg/kg), exceeding the new Dutch list action value, were determined for soil near the printer roller dumping area, sediment from Lianjiang River, and soil from a plastic burn site, respectively. A more thorough study is underway to elucidate the extent of contamination of toxic pollutants in different ecological compartments to establish whether these pollutants are bioaccumulated and biomagnified through food chains. Assessments of human health impacts from oral intake, inhalation, and dermal contact will be subsequently investigated. An erratum to this article is available at.     

我国电子废弃物的回收处理现状和管理对策

电子废弃物因其高速增长性、潜在污染性和资源性受到各国的广泛关注.我国由于对电子废弃物缺乏健全的回收体系和有效的监管,导致严重的环境污染和资源浪费.针对这一问题,论述了我国电子废弃物的来源、流向、处理处置和管理现状,借鉴国外生产者责任延伸制(EPR)的实践,从政府、生产者和消费者的责任分担角度.提出了适合我国国情的EPR体系.     

我国废旧家电及电子产品回收处理现状及对策

如何对废旧家电及电子产品进行高效收集并合理、安全处置,已成为世界各国普遍关注的问题。分析发达国家在该领域实施的措施,结合我国现状及存在的主要问题,提出建立规范的废旧家电及电子产品回收处理体系相关对策。     

Sustainability of recycling plastic waste as fibers for concrete: a review

Journal of Material Cycles and Waste Management - Plastic waste management is of global concern while construction industry keeps searching for innovations to become more sustainable. In this...     

Triboelectrostatic separation for granular plastic waste recycling: A review

The world’s plastic consumption has increased incredibly in recent decades, generating more and more plastic waste, which makes it a great public concern. Recycling is the best treatment for plastic waste since it cannot only reduce the waste but also reduce the consumption of oil for producing new virgin plastic. Mechanical recycling is recommended for plastic waste to avoid the loss of its virgin value. As a mechanical separation technology, triboelectrostatic separation utilizes the difference between surface properties of different materials to get them oppositely charged, deflected in the electric field and separately collected. It has advantages such as high efficiency, low cost, no concern of water disposal or secondary pollution and a relatively wide processing range of particle size especially suitable for the granular plastic waste. The process of triboelectrostatic separation for plastic waste is reviewed in this paper. Different devices have been developed and proven to be effective for separation of plastic waste. The influence factors are also discussed. It can be concluded that the triboelectrostatic separation of plastic waste is a promising technology. However, more research is required before it can be widely applied in industry.     

电子废弃物现状与回收处理探讨

伴随着电子工业和信息高科技产业的高速发展,电子废弃物问题不可避免地摆在了我们的面前.伴随着电子废弃物的越境转移和我国成为世界"电子产品制造基地",我国也成为世界上最大的"电子废弃物处理场".介绍了我国及世界上电子废弃物的现状与处理状况,分析了电子废弃物具有的潜在环境污染性与可作为再生资源回收利用的资源性的双重特性,探讨了我国电子废弃物回收处理的循环经济之路,及其相关的政策、方法和措施等.     

Formulating a VET roadmap for the waste and recycling sector: A case study from Queensland, Australia

Vocational Education and Training (VET) is an essential tool for providing waste management and recycling workers with the necessary skills and knowledge needed to beneficially influence their own employment and career development; and to also ensure productivity and safe working conditions within the organisations in which they are employed. Current training opportunities within Queensland for the sector are limited and not widely communicated or marketed; with other States, particularly Victoria and New South Wales, realising higher numbers of VET enrollments for waste management courses. This paper presents current VET opportunities and trends for the Queensland waste management sector. Results from a facilitated workshop to identify workforce requirements and future training needs organised by the Waste Contractors and Recyclers Association of Queensland (WCRAQ) are also presented and discussion follows on the future training needs of the industry within Queensland.     

我国包装废物回收体系研究

包装废物作为再生资源的重要一类,其回收体系融入在整个再生资源回收体系之中,与再生资源回收体系难以割裂,没有完全独立的包装废物回收系统。总结了我国包装废物回收体系的发展阶段,从目前看,其回收体系仍处于调整和规范发展阶段,并且还将维持较长时间;从不同角度归纳出包装废物的各种回收模式及相应特点;阐述了目前我国各种包装废物回收体系存在的合理性,与现阶段我国国情相符合;最后分析了包装废物回收体系中存在的主要问题,并提出相应的解决对策。     

我国废塑料回收和进口现状浅析

废塑料是我国四大再生资源品种之一．废塑料国内回收和进口数量大、种类多。对我国废塑料国内产生和进口的种类、数量和地域,以及国内废塑料的回收渠道和方式进行了阐述。     

我国包装废物回收利用管理体系研究

目前我国已具备可适用于包装废物管理的法律法规和政策制度基础,但对包装废物回收利用的管理多依靠市场行为和再生资源管理体系,缺乏规范性和针对性。包装废物管理的法规、政策、管理主体及其责任等方面都存在不足,导致对包装废物的监管缺位等一系列问题。在现有的法规体系基础上,提出包装废物管理改进的主要方面和对策措施,将法规政策落到实处,需要有关部门加以重视。     

小型废弃电器电子产品精细拆解与资源化利用初步探讨

随着工业化进程和社会生活的丰富,各种小型电器电子产品不断问世,相关废弃产品的拆解和资源化利用已经成为资源综合利用的重要课题.基于其分类与回收利用现状,就国内精细拆解与资源化利用问题进行了探讨,并以废弃手机为例,就处理原则、工艺流程设置和高值利用方法提出了一些建议.     

废弃电器电子产品回收处理行业管理政策探讨

围绕新近出台的《废弃电器电子产品回收处理管理条例》,借鉴欧盟等国家对废旧物资的管理理念和具体措施,探讨了我国废旧电器电子产品的界定及管理制度建设,提出建设社区试点网络管理体系、建立由市场主导的生产者责任延伸体系等建议。     

Mineral wool waste in Europe: a review of mineral wool waste quantity,quality, and current recycling methods

The construction and demolition (C&D) industry has been identified as a major source of waste. European Union legislation states that, by 2020, 70 % of C&D waste must be prepared for reuse, recycled or recovered. European Union member states must increase their C&D waste recycling percentages in order to meet this binding target. Utilization of mineral wool waste, often considered unrecyclable, could improve the recycling percentage of C&D waste. In this article, mineral wool production and waste volumes are estimated based on information from the Eurostat database. A literature survey is conducted to collect information about mineral wool material properties, current recycling methods, and barriers to recycling of mineral wool, and suitable methods for separating mineral wool from C&D waste streams and the economic viability of mineral wool recycling are discussed. It is noted that accurate estimation of mineral wool waste volumes is problematic due to the fragmented nature of available data. Based on the literature review, current methods for recycling mineral wool waste include utilization of mineral wool waste as a raw material in various products. Barriers to recycling include economic questions and issues related to the purity and health effects of mineral wool waste. Material properties of mineral wool waste, such as fire resistance, could provide improved properties in products utilizing mineral wool waste as a raw material.     

建筑垃圾循环利用实践

建筑垃圾的循环利用是今后建筑垃圾处理的必经之路。在对国内外建筑垃圾循环利用的相关政策、法律法规及回收现状进行比较分析的基础上,对目前建筑垃圾循环利用的案例进行调查整理,总结出建筑垃圾循环利用的一般过程;并在对目前建筑垃圾循环利用的方法进行研究后,介绍了一种先进实用的建筑垃圾循环利用方法;最后对我国建筑垃圾循环利用存在的问题进行剖析并提出解决问题的建议,以期对我国建筑垃圾循环利用的发展有所裨益。     

Report: recycling of flame-retarded plastics from waste electric and electronic equipment (WEEE).

Shredder residues produced in plants processing waste electric and electronic equipment are excluded from material recycling due to a variety of polymeric materials and the presence of brominated flame retardants (BFR), which might contain banned polybrominated diphenyl ethers or toxic polybrominated dioxins and furans (PBDD/F). Herein we present a technological approach to transfer a significant portion of the shredder residue into recycled polymers. The technological approach consists of a density-based enrichment of styrenics, which are subjected to a solvolysis process (CreaSolv process) in a second stage. This stage allows the elimination of non-target polymers and extraction of BFR and PBDD/F. Pilot processing of 11.5 and 50 kg shredder residues indicated a material yield of about 50% in the density stage and 70-80% in the CreaSolv process, and an effective removal of BFR additives. The recycled products were proved to comply with threshold values defined by the European directive on the restriction of hazardous substances (RoHS) and the German Chemikalienverbotsverordnung. Mechanical material properties exhibited high tensile and flexural modules as well as slight impact strength, which qualify the products for applications in new electronic equipment.     

基于典型拆解区环境污染的电子废物回收利用模式探析

我国电器电子产品保有量巨大,面对日趋增多的电子废物,从典型电子废物拆解区土壤及地下水污染情况出发,总结国外电子废物回收利用做法,分析我国当前电子废物回收利用现状及面临的形势,研究提出符合我国国情的电子废物回收利用模式.     

我国电子废弃物回收体系建设的思路与保障措施

随着电子信息产业的高速发展和人民生活水平的不断提高,电子废弃物的数量也不断增长,成为21世纪增长最快的固体废弃物。从我国电子废弃物的回收利用现状入手进行分析,提出建设一套专业回收利用体系,形成以城市社区回收点为基础,中转交投中心为纽带,资源循环利用为目的,点面结合、三位一体的电子废弃物回收利用体系,逐步提高回收、集散、循环利用能力,促进行业健康、有序发展。