Exoenzymes of Trametes versicolor can metabolize coplanar PCB congeners and hydroxy PCB

Two fractions containing the oxidase activity toward 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonate) (ABTS) were obtained using ion-exchange DEAE-Sepharose column chromatography of the culture fluid of white-rot fungus, Trametes versicolor. These two fractions can reduce the level of coplanar PCB congeners (Co-PCBs). The ABTS oxidase in the first fraction passed through the DEAE-Sepharose column. The ABTS oxidase in the second fraction was adsorbed to the column at 相似文献   

Desorption kinetics for selected PCB congeners from river sediments

Desorption of PCBs from sediment can significantly affect the ultimate fate and effects of PCBs in aquatic systems. Using a gas purging technique to strip soluble and sorbed polychlorinated biphenyls (PCBs) from solutions and sediment suspensions, Henry's law constants, approach to equilibrium, and desorption rate constants for four PCB congeners were measured. Henry's law constants were on the order of 10⁻⁴ m³ atm mole⁻¹. Desorption rate constants measured for a predominantly kaolinitic, low-organic carbon sediment were on the order of 0.03–0.1 days⁻¹. In contrast, desorption rate constants measured for a sediment composed of montmorillonite with a 3% organic carbon content were on the order of 0.009–0.04 days⁻¹. Desorption data suggest that equilibration times for PCBs with low chlorine content are on the order of six weeks, and months to years for PCBs with a significantly higher chlorine content.     

PCB and dioxin-like PCB in indoor air of public buildings contaminated with different PCB sources--deriving toxicity equivalent concentrations from standard PCB congeners

Data on dioxin-like PCB in indoor air of buildings with PCB-containing materials and on possible correlation between toxicity equivalent concentrations (TEQ) and levels of non-dioxin-like standard PCB is sparse. As part of a larger survey on indoor-air contamination with PCB, the connection between the concentration of standard PCB congeners and the dioxin-like toxicity expressed as TEQ was investigated. Indoor air samples (n=8) were collected in four public buildings with known PCB sources and total PCB levels in the range from 715 to 2250 ng/m3 and analyzed for the six non-dioxin-like standard PCB (congeners 28, 52, 101, 138, 153, 180), the twelve dioxin-like PCB congeners according to WHO and the 17 2,3,7,8-substituted PCDD/PCDF congeners. In three buildings where PCB were used as flame retardant coatings of acoustic ceiling tiles, PCB 101 had the maximum level among the six standard PCB, while in the building with permanent elastic sealants as PCB source, congeners 28 and 52 dominated the pattern by far. In the case of permanent elastic sealants as PCB source (n=3) a total PCB concentration of 1000 ng/m3 corresponded to a total TEQ level of 0.3-0.6 pg/m3. In contrast, in rooms with acoustic ceiling tiles as PCB source, 1.8-4.7 pg TEQ/m3 per 1000 ng total PCB/m3 were found. Linear regression analysis between PCB and TEQ indicated that PCB 118 might be used to calculate the total TEQ of dioxin-like PCB and PCDD/PCDF. By means of such a correlation it is possible to estimate TEQ by extrapolation from the results of less sophisticated analytical methods. It is tentatively recommended to use PCB 118 for screening purposes or re-evaluation of standard PCB indoor-air measurements. If only the six non-dioxin-like PCB standard congeners are available, a regression algorithm using the sum of PCB 101, 138, 153 and 180 might be used instead.     

Microbial dechlorination of three PCB congeners in river sediment.

We investigated the potential for the anaerobic degradation of three PCB congeners (2,3,5,6-CB, 2,3,4,5-CB, and 2,3,4,5,6-CB) in sediments collected from five monitoring sites along the Keelung River in northern Taiwan. Optimal conditions for congener dechlorination were 30 degrees C and pH 7.0. Intermediate 2,3,4,5-CB products were identified as 2,3,5-CB, 2,4,5-CB, and 2,5-CB. Intermediate 2,3,4,5,6-CB products were identified as 2,3,5,6-CB, 2,3,6-CB, and 2,5-CB. For 2,3,5,6-CB, intermediate products were identified as 2,3,6-CB and 2,5-CB. Dechlorination rates for PCB congeners were observed as (fastest to slowest): 2, 3, 4-CB > 2, 3, 4, 5-CB > 2, 3, 4, 5, 6-CB > 2, 3, 5, 6-CB > 2, 2', 3, 3', 4, 4'-CB > 2, 2', 4, 4' 6, 6'-CB > 2, 2', 3, 4, 4', 5, 5'-CB > 2, 2', 3, 3', 4, 4', 5, 5'-CB. Rates decreased for mixtures of the eight congeners. Dechlorination rates for the three primary congeners under different reducing conditions occurred in the order of (fastest to slowest): methanogenic condition > sulfate-reducing condition > nitrate-reducing condition. Under methanogenic and sulfate-reducing conditions, dechlorination rates were enhanced by the addition of lactate, pyruvate, or acetate, but delayed by the addition of manganese oxide, or ferric chloride. Under nitrate-reducing condition, dechlorination rates were delayed by the addition of lactate, pyruvate, acetate, manganese oxide or ferric chloride. Treatment with such microbial inhibitors as bromoethanesulfonic acid (BESA) or molybdate revealed that methanogen and sulfate-reducing bacteria were involved in the dechlorination of these three PCB congeners.     

Serum concentrations of indicator PCB congeners in the Czech adult population

In 2006, levels of seven indicator polychlorinated biphenyl congeners (PCB28, 52, 101, 118, 138, 153, and 180) in blood serum of 202 blood donors residing for more than 2 years in five urban areas included in the Czech Human Biomonitoring project were measured by GC/MS/MS method. PCB congeners 138, 153 and 180 accounted for about 97% of the sum of the indicator congeners analyzed. Overall, the median and 95th percentile of the most abundant congener PCB 153 were 438 ng/g lipid and 1079 ng/g lipid, respectively. The highest median levels were found in Uherské Hradiste (669 ng/g lipid) and Ostrava (672 ng/g lipid in males compared to 341 ng/g lipid in females). Serum PCB concentrations were significantly associated with age, gender, place of residence and smoking habit, but not with body mass index and education. The results suggest the importance of PCB body burden in the Czech general population and the existence of hot spots.     

PCB in soils and estimated soil-air exchange fluxes of selected PCB congeners in the south of Sweden

PCB concentrations were studied in different soils to determine the spatial variation over a region of approximately 11 000 km(2). PCB congener pattern was used to illustrate the spatial differences, as shown by principal component analysis (PCA). The relationship to different soil parameters was studied. PCB concentrations in soil showed a large variation between sampling-areas with median concentrations ranging between 2.3 and 332 ng g(-1) (dw). Highest concentrations were found at two sites with sandy soils, one with extremely high organic carbon content. Both sites were located on the west coast of southern Sweden. Soils with similar soil textures (i.e. sandy silt moraine) did not show any significant differences in PCB concentrations. PCB congener composition was shown to differ between sites, with congener patterns almost site-specific. PCB in air and precipitation was measured and the transfer of chemicals between the soil and air compartments was estimated. Soil-air fugacity quotient calculations showed that the PCBs in the soil consistently had a higher fugacity than the PCBs in the air, with a median quotient value of 2.7. The gaseous fluxes between soil and air were estimated using standard modelling equations and a net soil-air flux estimated by subtracting bulk deposition from gaseous soil-air fluxes. It was shown that inclusion of vertical sorbed phase transport of PCBs in the soil had a large effect on the direction of the net soil-air exchange fluxes.     

Temporal and spatial trends of PCB congeners in UK gannet eggs

Gannet (Sula bassana) eggs collected from Ailsa Craig, Western Scotland between 1977-1998 have been analyzed retrospectively for several PCB congeners. Concentrations of a range of congeners were determined in 8-10 eggs analyzed separately for several individual years. All congeners declined in concentrations throughout the time period, but the rates of decline differed for different congeners. Declines were first order and half-lives varied between 5.4 years for PCB-101 to 10.1 years for PCB-180. Egg concentrations reflect the maternal body burden, which itself is controlled by the birds rate of intake (principally via the diet) and losses (via metabolism and other clearance mechanisms). The declining concentrations in eggs, therefore, broadly reflect reductions in prey concentrations (principally herring and mackerel) and--in turn--water column concentrations. Rates of change in PCB concentrations from this study were similar to those noted in fish-eating birds from the Baltic Sea and North American Great Lakes, and ambient air in the UK. This provides indirect evidence that gannet eggs are broadly reflecting regional/global scale clearance/removal mechanisms which are controlling ambient PCB concentrations.     

Identification of a novel PCB source through analysis of 209 PCB congeners by US EPA modified method 1668

PCDD/Fs and PCBs in surface waters and effluent waste streams flowing into New York/New Jersey Harbor were sampled by large volume filtration and solid phase extraction (XAD-2). Passive hexane samplers were employed in sewer trackdown. Extraction media were analyzed for 2,3,7,8 substituted PCDD/Fs and all 209 PCB congeners. The non-Aroclor PCB congener, 3,3^′-DiCB, was ubiquitous in the harbor and was found to be associated with pigment manufacture. Knowledge of inadvertent synthesis of non-Aroclor PCBs is not new but its magnitude and the generation of congeners with dioxin-like properties from this process is novel.     

The binding of three PCB congeners to dissolved organic carbon in freshwaters

The binding of three polychlorinated biphenyl (PCB) congeners to natural levels of dissolved organic carbon (DOC) was measured in 12 lakes and streams using Sep-Pak C₁₈ columns. The association coefficients calculated on the basis of DOC (i.e. K_DOC mL/g C), varied by over an order of magnitude among the different freshwaters and ranged between 2.05 × 10² and 8.86 × 10³ mL/g C for PCB 52 and 1.03 × 10⁴ and 1.70 × 10⁵ mL/g C for PCB 153. In general, there were no significant correlations (p > 0.05) between the K_DOC values and various chemical parameters in the study lakes and streams.

A relationship was derived between the fraction of bound PCB and the octanol-water partition coefficient. While this relationship explained almost 50% of the variation in the observed data, it is apparent that other factors influence K_DOC values and that in natural freshwaters, only a small fraction of the DOC is involved in the binding of PCBs and other hydrophobic pollutants.     

PCBQ: Computerized quantification of total PCB and congeners in environmental samples

Computerized methodologies for the quantification of total PCBs, PCB in Aroclor mixtures and individual PCB congeners in environmental samples are presented. The method for total PCBs is based on a multiple-linear regression analysis using data from capillary gas chromatography of Arocolor standards. PCB congeners were identified and their weight percentages determined in Aroclor mixtures by GC/MS. PCB congeners and total PCBs were accurately quantified in predetermined test data and environmental samples.     

Congener profiles of PCB and a proposed new set of indicator congeners

In this study, a new method for calculating total PCB and toxic equivalents (TEQ) of coplanar PCB (Co-PCB) was proposed, called the 'PCB dual method'. This method analysed various kinds of technical PCB, samples contaminated by technical PCB and byproduct PCB. In the PCB dual method, a data set of 15 indicator congeners was utilized for the calculations, having IUPAC nos. #3, #8, #28, #52, #77, #101, #105, #118, #126, #138, #153, #180, #194, #206 and #209. The 15 congener set was chosen from the major congeners, determined by HRGC/HRMS analysis, in 18 technical PCB, Kanechlor, Aroclor, Clophen and Chlorofen, and 20 other samples, such as indoor air, flue gases, emission gases, municipal solid waste (MSW), ash and sealant. To obtain total PCB and TEQ of Co-PCB, the intermediate sum for the concentration of the 15 congeners was multiplied by each multiplication factor. As a result, we obtained the average factor used to calculate total PCB in technical PCB and other samples. For technical PCB, the factor was 3.01, while for indoor air samples, flue and emission gases, MSW, ash and sealants, the factors were 3.92, 4.16, 3.68, 4.52 and 4.77, respectively. Moreover, the factor used to calculate the TEQ of Co-PCB in Kanechlor and other source samples were also obtained. The factors for Kanechlor, indoor air samples and emission gases from a cement plant were in the order of 10(-5), while the factor for flue gases in a MSW incinerator was in the order of 10(-3). These data were valuable for the rough estimation of the TEQ of Co-PCB without separation from other PCB before individual measurements.     

A survey of PCB congeners in U.K. cows'' milk

Samples of unpasteurised bulked milk, taken directly from ten herds of dairy cattle on rural and urban farms in the north west of England on five separate sampling occasions, were analysed for a range of PCB congeners. ΣPCB concentrations (sum of 37 congeners) ranged from 3.4–16.4 ng/g milk fat with a mean ΣPCB concentration of 8.4 ng/g milk fat. The dominating congeners were 118, 153, 138 and 180, which contributed 15%, 20%, 17% and 9% of the ΣPCB load respectively. The chlorine pattern of the congeners which made moderate or major contributions to the ΣPCB concentration were typically substituted at both para positions (4, 4′), while the PCB congeners not detected in the milk had at least one ring that was not 4-substituted. These results indicate the 4,4′ substitution pattern as being the key to PCB persistence in cows. It is estimated that consumption of typical daily intakes of milk with the PCB concentrations measured in this study would contribute 11 % of the average daily ΣPCB intake for individuals in the UK. This contribution would increase to 30% when exposure through the consumption of dairy products prepared from such milk (e.g. cheese, butter) is taken into account. It is estimated that the inclusion of the TEF assigned PCBs would typically increase the TEQ rating of cows' milk by approximately 40% over that attributed to PCDD/Fs alone.     

Pure non-dioxin-like PCB congeners suppress induction of AhR-dependent endpoints in rat liver cells

The relative potencies of non-ortho-substituted coplanar polychlorinated biphenyl (PCB) congeners to activate the aryl hydrocarbon receptor (AhR) and to cause the AhR-dependent toxic events are essential for their risk assessment. Since some studies suggested that abundant non-dioxin-like PCB congeners (NDL-PCBs) may alter the AhR activation by PCB mixtures and possibly cause non-additive effects, we evaluated potential suppressive effects of NDL-PCBs on AhR activation, using a series of 24 highly purified NDL-PCBs. We investigated their impact on the model AhR agonist-induced luciferase reporter gene expression in rat hepatoma cells and on induction of CYP1A1/1B1 mRNAs and deregulation of AhR-dependent cell proliferation in rat liver epithelial cells. PCBs 128, 138, and 170 significantly suppressed AhR activation (with IC₅₀ values from 1.4 to 5.6 μM), followed by PCBs 28, 47, 52, and 180; additionally, PCBs 122, 153, and 168 showed low but still significant potency to reduce luciferase activity. Detection of CYP1A1 mRNA levels in liver epithelial cells largely confirmed these results for the most abundant NDL-PCBs, whereas the other AhR-dependent events (CYP1B1 mRNA expression, induction of cell proliferation in confluent cells) were less sensitive to NDL-PCBs, thus indicating a more complex regulation of these endpoints. The present data suggest that some NDL-PCBs could modulate overall dioxin-like effects in complex mixtures.     

Coating effects on the glass adsorption of polychlorinated biphenyl (PCB) congeners

The effects of coating materials on polychlorinated biphenyl (PCB) adsorption in aqueous solution were assessed in an attempt to minimize PCB sorption loss during sampling processes. A coating material, which enhances PCB adsorption and allows adsorbed PCBs to be readily extracted by solvents, can act as a sampling concentrator to reduce PCB losses from both adsorption and evaporation. Several coating materials were evaluated, including paraffin oil, silicone oil, dimethyldichlorosilane (Sylon-CT), Prosil 28^® and polydimethylsiloxane (PDS) with viscosity 0.65, 50 (PDS 50), and 500 (PDS 500) cSt. PDS and silicone oil enhanced adsorption for all five congeners examined (IUPAC No. 28, 52, 101, 138, and 180). Sylon-CT, paraffin oil and Prosil 28^® had inconsistent effects on adsorption of different congeners. Desorption of adsorbed PCBs onto all coating types was assessed. The recovery efficiency of extracting PCBs with solvents was enhanced greatly with all coatings as opposed to non-coated surfaces, with the exception of paraffin oil. Coating with silicon oil, PDS 50, and 500 resulted in virtually 100% recovery of adsorbed PCBs. It was also found that Teflon containers were poor substitutes for glass containers and failed to minimize PCB losses. Among the materials studied, the best coating that could be used as a sampling concentrator was PDS 500.     

Atmospheric Factors Influencing Daily Sulfate Concentrations in Chicago Air

Abstract

Confidence interval construction for central tendency is a problem of practical consequence for those who must analyze air contaminant data. Determination of compliance with relevant ambient air quality criteria and assessment of associated health risks depend upon quantifying the uncertainty of estimated mean pollutant concentrations. The bootstrap is a resampling technique that has been steadily gaining popularity and acceptance during the past several years. A potentially powerful application of the bootstrap is the construction of confidence intervals for any parameter of any underlying distribution. Properties of bootstrap confidence intervals were determined for samples generated from lognormal, gamma, and Weibull distributions. Bootstrap t intervals, while having smaller coverage errors than Student's t or other bootstrap methods, under-cover for small samples from skewed distributions. Therefore, we caution against using the bootstrap to construct confidence intervals for the mean without first considering the effects of sample size and skew. When sample sizes are small, one might consider using the median as an estimate of central tendency. Confidence intervals for the median are easy to construct and do not under-cover. Data collected by the Northeast States for Coordinated Air Use Management (NESCAUM) are used to illustrate application of the methods discussed.     

Fate of PCDF/PCB congeners and change of clinical symptoms in patients with Yusho PCB poisoning for 30 years

Two mass-food poisonings called Yusho and Yucheng occurred in Japan and Taiwan in 1968 and 1979, respectively. Blood samples from five Yusho patients and three Yucheng patients were collected several times from 1982 to 1998 and from 1980 to 1995, respectively, and analyzed for polychlorinated dibenzofurans (PCDF) and polychlorinated biphenyls (PCB) congeners. Fat base concentrations of 2,3,4,7,8-penta-CDF in the Yusho patients, which were responsible for about 70% of the dioxin toxicity, are estimated to be decreased from 60 ppb in 1969 to 800 ppt in 1997 with the median half-life of 2.9 years in the first 15 years after onset and 7.7 years in the next stage of 15 years. Typical Yusho symptoms of acneiform eruption, dermal pigmentation and increased eye discharge were very gradually recovered with lapse of several years. However, enzyme and/or hormone-mediated signs of high serum triglyceride, high serum thyroxin, immunoglobulin disorder and others are persistently maintained for 30 years.     

Labile and non-labile desorption rate constants for 33 PCB congeners from lake sediment suspensions

Lake sediments contaminated with polychlorinated biphenyls (PCBs) were purged using a gas stripping technique to estimate desorption rate constants. Desorption profiles and modeling of the data clearly show a two-step release of PCBs from sediment suspensions that can be described as a labile (fast) release followed by a non-labile (slow) release. Data are summarized by labile and non-labile rate constants and by mass in each phase as a function of suspended solids concentration for twelve pure congeners and nine co-eluting data sets (twenty-one chromatograph peaks total). Labile desorption rate constants range from 113 days(-1) to 1.43 days(-1) for the 100 mg/l sediment suspension, from 67.7 days(-1) to 2.45 days(-1) for the 1000 mg/l sediment suspension, and from 8.41 days(-1) to 0.946 days(-1) for the 5000 mg/l sediment suspension. Labile rate constants consistently decreased with increasing suspended solids, and, in general, decreased with increasing degree of chlorination (reflected in increasing retention time in the chromatogram). No consistent trend was observed for the non-labile rate constants with suspended solids concentration or degree of chlorination. The average non-labile rate constant for the PCB congeners studied here was 0.154 days(-1) (s.d.=0.158; n=63). The distribution between the labile and non-labile phases also failed to indicate dependence on suspended solids concentration, chlorine substitution pattern, or molecular weight of the congener, although the data from the 5000 mg/l suspension consistently contained less labile components. The average distributions (n=63) were 60.1% in the labile phase and 39.9% in the non-labile phase.     

The relation between levels of selected PCB congeners in human serum and follicular fluid

Individual congener and total PCB concentrations were determined in serum and follicular fluid obtained from women undergoing assisted reproductive technologies (in-vitro fertilization and embryo replacement). Although the mean individual PCB levels revealed varying degrees of contamination, the results fall in the same range as that observed by other investigators. Except for PCB 118, correlations between levels in serum and follicular fluid were strong, and statistically significant at p < 0.05. Moreover PCB 153, a major and very stable PCB congener has been shown to correlate to the total amount of PCBs (r = 0.994, and r = 0.987, for serum and follicular fluid, respectively). The same accumulation patterns of PCBs for serum and follicular fluid have been observed.     

PCB, PCDF, and PCDD exposure following a transformer fire: Chicago

On September 28, 1983, an electrical fire in a transformer vault resulted in the loss of 15 gallons of transformer oil composed of 65% PCBs (Aroclor 1260) and 35% trichlorobenzene and forced the precautionary evacuation of a major Chicago office building. A square foot wipe sample of soot on the vault ceiling contained 28,000 ng total TCDFs, 3,800 ng 2,3,7,8-TCDF, 40,000 ng PCDFs, 33,000 ng HxCDFs, 11,200 ng HpCDFs, 1,238 ng OCDFs, 314 ng HpCDDs, and 127 ng OCDDs. No PCDFs or PCDDs were detected in the blood (detection limit 3–40 ppt) of two fire fighters hospitalized with smoke inhalation nor of two office employees similarly exposed.     

Equilibrium partitioning of PCB congeners in the water column: Field measurements from the Hudson River

The environmental behavior of hydrophobic organic compounds in water is driven by partitioning between dissolved and sorbed phases. Partitioning behavior of a compound is often based on empirical relationships to other properties of the chemical, such as water solubility and octanol-water partition coefficients, but actual partitioning in the environment may differ significantly from such predictions. We conducted intensive studies of the distribution of PCBs in the fresh water portion of the Hudson River, using sensitive capillary-column gas chromatography methods to calibrate and resolve quantitations for 90 PCB congeners in 48 samples at 10 locations. A linear equilibrium model of PCB congener partitioning, when corrected for temperature and suspended-matter organic carbon content, provides a good representation of phase distribution. When particulate-phase concentrations are predicted from dissolved concentrations with a two-phase model, the predictions are unbiased for the majority of samples and the average percent difference between observed and predicted particulate concentrations is ±43 percent. Estimated in situ partition coefficients show systematic differences from partition coefficients predicted from octanol-water partitioning. Partitioning to colloids appears to be a significant component of total concentration for mono- and dichlorobiphenyls, but not for more highly chlorinated congeners.The colloidal fraction may still cause significant overestimation of the bioavailable fraction for more hydrophobic congeners when a two-component model is used.