Externalities of Fugitive Dust

It is known that fugitive dust can cause human health and environmental problems, alone or in combination with other air pollutants. These problems are referred to as ‘external costs’ that have been traditionally ignored. However, there is a growing interest towards quantifying externalities to assist policy and decision-making. With this in mind, the present study aimed at discussing the environmental regulations that deal with fugitive dust, the impact of fugitive dust on human health and global climate system, and the available methods for calculating fugitive dust externalities. The damage cost associated with human health and global environmental problems was predicted based on the environmental strategy priority model. The damage cost estimated by the model ranged from 40 to 374 EUR/kg of emitted fugitive dust with a mean value of 120 EUR/kg of emitted fugitive dust. It was also found that PM_2.5 and PM₁₀ have contributed to about 60% and 36% of the estimated damage cost, respectively. The remaining 4% was attributed to both nitrate and sulfate aerosols.     

Evaluation of Four Live-Sorting Methods for Use in Rapid Biological Assessments Using Macroinvertebrates

Rapid bioassessment (RBA) techniques for evaluating river health are now commonplace and there is much debate on the best methods that should be used. One of the important features of RBA is subsampling of large qualitative or semi-quantitative samples to reduce the costs associated with handling and identifying animals. In Australia, the Australian River Assessment System (known as “AusRivAS”) has been widely used since 1994 to monitor and assess river health. To test the efficacy of AusRivAS protocols, four live-sorting protocols, the standard Australian River Assessment Scheme (AusRivAS) and three suggested improvements, were evaluated in three habitat types and in clear and turbid rivers. The suggested improvements included using magnification during the live-sort process, separate sorting of coarse and fine fractions and increasing the amount of time or animals collected. There was no statistically significant difference between any of the trialed live-sort protocols in terms of the number of taxa collected compared to the number remaining, the community composition, the abundances of individual families collected, or the AusRivAS Observed/Expected taxa ratios. The lack of differences between the live-sort protocols suggests that technicians using the current standard AusRivAS protocols are able to effectively obtain a representative subsample of animals from the whole kick or sweep net qualitative sample. This has the advantage of cost savings because no retraining will be required, field procedures will remain uncomplicated and previous river health assessments will remain valid.     

Health effects and social costs of particulate pollution – a case study for Oslo

This study analyses health damages from particulate pollution and the corresponding social costs. The analyses, which are based on transferring dose–response functions to Norway, is made within an integrated approach, where the economic impacts of the health damages are handled separately from the non‐economic welfare effects. We find that the social costs of health damages in Oslo are significant, and that the non‐economic welfare effects clearly dominate the cost figure.     

Assessing the social cost of housing projects on the built environment: Analysis and monetization of the adverse impacts incurred on the neighbouring communities

Construction projects generate serious environmental adverse impacts on the adjacent residents. All those harmful consequences and damages that third parties or the community sustain due to the implementation of construction processes are called social costs. Although, the presence of social costs is widely mentioned in the literature, in the projects' initial cost estimation practices, the social costs are not estimated and included. Whereas since these costs are not compensated, problems can be emerged by the community. It is a truism that the majority of the models proposed to quantify the social costs have been concentrated on construction, repair, and maintenance of the infrastructure projects namely; utilities, roads, and highways. On the other hand, up to the present, a limited number of attempts has been made to quantify residential housing construction associated social costs. Thus, this research aims to expand and/or contribute to the existing body of knowledge via estimating how much social cost society surrounding residential housing construction sites are subjected to. For this purpose, a social cost estimation model is developed to assist industry professionals on how to estimate social costs in residential construction projects. The social cost estimation model is developed to provide guidance for phase by phase monetization of the residential construction associated social costs. In this paper, the model proposed for social cost estimation is validated via a case study in Turkey.     

Status and future of the forest health indicators program of the USA

For two decades, the US Department of Agriculture, Forest Service, has been charged with implementing a nationwide field-based forest health monitoring effort. Given its extensive nature, the monitoring program has been gradually implemented across forest health indicators and inventoried states. Currently, the Forest Service??s Forest Inventory and Analysis program has initiated forest health inventories in all states, and most forest health indicators are being documented in terms of sampling protocols, data management structures, and estimation procedures. Field data from most sample years and indicators are available on-line with numerous analytical examples published both internally and externally. This investment in national forest health monitoring has begun to yield dividends by allowing evaluation of state/regional forest health issues (e.g., pollution and invasive pests) and contributing substantially to national/international reporting efforts (e.g., National Report on Sustainability and US EPA Annual Greenhouse Gas Estimates). With the emerging threat of climate change, full national implementation and remeasurement of a forest health inventory should allow for more robust assessment of forest communities that are undergoing unprecedented changes, aiding future land management and policy decisions.     

Using a relative health indicator (RHI) metric to estimate health risk reductions in drinking water

When a new drinking water regulation is being developed, the USEPA conducts a health risk reduction and cost analysis to, in part, estimate quantifiable and non-quantifiable cost and benefits of the various regulatory alternatives. Numerous methodologies are available for cumulative risk assessment ranging from primarily qualitative to primarily quantitative. This research developed a summary metric of relative cumulative health impacts resulting from drinking water, the relative health indicator (RHI). An intermediate level of quantification and modeling was chosen, one which retains the concept of an aggregated metric of public health impact and hence allows for comparisons to be made across “cups of water,” but avoids the need for development and use of complex models that are beyond the existing state of the science. Using the USEPA Six-Year Review data and available national occurrence surveys of drinking water contaminants, the metric is used to test risk reduction as it pertains to the implementation of the arsenic and uranium maximum contaminant levels and quantify “meaningful” risk reduction. Uranium represented the threshold risk reduction against which national non-compliance risk reduction was compared for arsenic, nitrate, and radium. Arsenic non-compliance is most significant and efforts focused on bringing those non-compliant utilities into compliance with the 10 μg/L maximum contaminant level would meet the threshold for meaningful risk reduction.     

Computer-aided rapid environmental impact assessment

Environmental impact assessment of a project attempts to bring about compatibility between ecology and economics. A computer-aided, quantitative and rapid methodology for environmental impact assessment is presented in this paper. The cost of abatement of deleterious environmental impacts is one of the factors used to identify the best project option from environmental and cost considerations. The methodology is based on the three basic steps of environmental impact assessment vis-à-vis identification, prediction, and evaluation. Several models and predictors for different environmental components are incorporated in the computer program. An evaluation method is presented based on mathematical functions for value function graphs for different aesthetic, environmental, and health risks.     

Forest Health Assessment and Monitoring – Issues for Consideration

Part of this paper has been prepared for the lecture Forest Health Assessment-Criteria,Methods and Problems given by the author at the UIMPuniversity course Sanidad Forestal en el Bosques Mediterraneos yTemplados. Implicacion de la Contaminacion Atmosferica y del Cambio Global, held in Valencia, Spain, October, 1995. Assessment and monitoring of forest health representsa key point for environmental policy and for the management ofenvironmental resources. With the renewed interest in assessment andmonitoring of forest health generated by the suspected occurrence ofa widespread forest decline in Europe and North America, manyactivities have been undertaken: however, some questions should beconsidered and clarified when attempting to estimate forest health.Particularly, the objective(s) of the assessment and monitoringprogram should be carefully identified. Identification of a program‘stask has a number of implications and consequences: it implies adefinition of what concept of forest health (forest ecosystem health,forest health or forest trees health?) is assumed, what will be thetarget entity to be monitored, and therefore the identification of therelevant assessment questions and assessment endpoints.Consequences concern the definition of the spatial scale (frominternational to landscape and plot scale monitoring) and ecologicalcoverage (from single species population to population ofecosystems) of the program, which can have a considerable influenceon the choice of the proper sampling strategy and tactic, as well ason the most suitable methods, indicators and indices to be used.Although much of the work in the field of forest health and airpollution has concentrated on surveys on crown transparency anddiscoloration, there is an entire range of methods, indicators andindices developed to assess the health status of forests. The decisionas to which ones should be used will depend on the aim of theprogram and on economic and practical considerations. A furtherconsideration concerns the time span of the program, but anydecision in this field is subject to many limitations due to difficultiesin predicting future monitoring needs. All these points should becarefully considered and implemented according to a rigorousQuality Assurance procedure since any decision will influence futurework for many years.     

Spending Environmental Expenditure More Effectively: A Case Study from Brisbane, Australia

Growing urbanisation causes pressures on many environmental assets such as groundwater systems, waterways, atmosphere, ecosystems and others. To manage and mitigate the negative effects of these pressures, environmental programs are typically launched, which comprise of eligible projects in different affected locations. The implementation of individual projects has a cost. However, due to budget constraints, most frequently not all suggested projects can be implemented which makes necessary to choose a subset. In this paper, we use a cost utility approach and a subsequent combinatorial optimisation based on metaheuristics to determine a project portfolio which returns a maximum aggregated utility while keeping the budget constraint. To ensure that the mutual exclusiveness of projects at one particular site is guaranteed, we further developed the employed metaheuristics. We apply this approach within a waterway health program in a river catchment in Brisbane, Australia, and compare its results to a commonly used selection process that does not involve combinatorial optimisation. We find that the use of combinatorial optimisation leads to a considerable improvement of the selection process and can help to more effectively allocate environmental expenditure.     

A GIS-based approach for the long-term prediction of human health risks at contaminated sites

A Health Index/Risk Evaluation Tool (HIRET) has been developed for the integration of risk assessment and spatial planning using GIS capabilities. The method is meant to assist decision makers and site owners in the evaluation of potential human health risk with respect to land use. Human health risk defined as the potential adverse effects on human life or health is generally accepted as the most important aspect for site assessment and planning of remediation strategies. It concerns polluted sites that endanger human health on one hand and derelict land that does not cause the immediate risk on the other hand. In current state-of-the-art risk-assessment, long-term spatial and temporal changes of risks, in relation to changes in contamination patterns and land use functions, are not taken into account. The aim of this paper is to demonstrate the methodology developed for human health risk assessment in aspect of spatial and temporal domain. HIRET was developed as an extension for ESRI software ArcView 3.2 and allows performing dynamic human health risk assessment in long-term period, which is relevant for land use planning. The paper illustrates how such methodology can assist in environmental decision-making to enhance the efficiency of contaminated land management. A case study of contaminated site is given showing how data can be used within a GIS framework to produce maps indicating areas of potential human health risk.     

Development of low-cost ammonia gas sensors and data analysis algorithms to implement a monitoring grid of urban environmental pollutants

The present study is focused on the implementation of a novel, low cost, urban grid of nanostructured chemresistor gas sensors for ammonia concentration ([NH(3)]) monitoring, with NH(3) being one of the main precursors of secondary fine particulate. Low-cost chemresistor gas sensors based on carbon nanotubes have been developed, their response to [NH(3)] in the 0.17-5.0 ppm range has been tested, and the devices have been properly calibrated under different relative humidity conditions in the 33-63% range. In order to improve the chemresistor selectivity towards [NH(3)], an Expert System, based on fuzzy logic and genetic algorithms, has been developed to extract the atmospheric [NH(3)] (with a sensitivity of a few ppb) from the output signal of a model chemresistor gas sensor exposed to an NO(2), NO(X) and O(3) gas mixture. The concentration of these pollutants that are known to be the most significant interfering compounds during ammonia detection with carbon nanotube gas sensors has been tracked by the ARPA monitoring network in the city of Milan and the historical dataset collected over one year has been used to train the Expert System.     

Assessing health impacts in complex eco-epidemiological settings in the humid tropics: Modular baseline health surveys

The quantitative assessment of health impacts has been identified as a crucial feature for realising the full potential of health impact assessment (HIA). In settings where demographic and health data are notoriously scarce, but there is a broad range of ascertainable ecological, environmental, epidemiological and socioeconomic information, a diverse toolkit of data collection strategies becomes relevant for the mainly small-area impacts of interest. We present a modular, cross-sectional baseline health survey study design, which has been developed for HIA of industrial development projects in the humid tropics. The modular nature of our toolkit allows our methodology to be readily adapted to the prevailing eco-epidemiological characteristics of a given project setting. Central to our design is a broad set of key performance indicators, covering a multiplicity of health outcomes and determinants at different levels and scales. We present experience and key findings from our modular baseline health survey methodology employed in 14 selected sentinel sites within an iron ore mining project in the Republic of Guinea. We argue that our methodology is a generic example of rapid evidence assembly in difficult-to-reach localities, where improvement of the predictive validity of the assessment and establishment of a benchmark for longitudinal monitoring of project impacts and mitigation efforts is needed.     

Inter-relation between environmental monitoring data,human exposure and health effects

To determine whether a population has been affected by a chemical, evidence of exposure must be established. The mere presence of a chemical in the surroundings of a population may not, in all instances, result in actual exposure. Not all such exposures will cause health effects; nor is it always possible to establish that illness has or will result from exposure to chemicals. The inability to establish health effects in humans cannot a priori be translated to mean that a specific chemical is harmless. On the other hand, it must be determined whether health studies would be fruitful. If exposure was so minimal that no health effects are expected, then no health studies should be conducted.     

Assessing the effects of noise abatement measures on health risks: A case study in Istanbul

In recent decades, noise pollution caused by industrialization and increased motorization has become a major concern around the world because of its adverse effects on human well-being. Therefore, transportation agencies have been implementing noise abatement measures in order to reduce road traffic noise. However, limited attention is given to noise in environmental assessment of road transportation systems. This paper presents a framework for a health impact assessment model for road transportation noise emissions. The model allows noise impacts to be addressed with the health effects of air pollutant and greenhouse gas emissions from road transportation. The health damages assessed in the model include annoyance, sleep disturbance, and cardiovascular disease in terms of acute myocardial infarction. The model was applied in a case study in Istanbul in order to evaluate the change in health risks from the implementation of noise abatement strategies. The noise abatement strategies evaluated include altering pavement surfaces in order to absorb noise and introducing speed limits. It was shown that significant improvements in health risks can be achieved using open graded pavement surfaces and introducing speed limits on highways.     

The institutional dynamics behind limited human health considerations in environmental assessments of coal mining projects in New South Wales,Australia

Coal extraction remains supported in many countries despite a global context challenging the industry. A large evidence base links coal with negative consequences for human health. Environmental assessments (EAs) are regulated in nearly every country to assess and set conditions for large industry projects, including coal mines, but tend to exclude health impacts. This study investigated the institutional dynamics surrounding the inclusion of health in coal mining EAs in New South Wales, Australia. Semi-structured interviews with varied stakeholders were supported by a review of legislation, relevant case law and media analysis. Using insights from theories on power and institutions the findings show how EA practice is influenced by the politicization of coal mining that excludes potentially negative narratives surrounding the known human health impacts of coal. Poor EA practice is compounded by legislative ambiguity and lack of conceptual understanding about assessing health. EA's legislative purpose of approving projects undermines confidence that a balanced assessment of impacts has been made. EA is seen as a pro-industry process that disempowers those with dissenting voices. The research explains how the institutional dynamics of a policy process like EA challenge its potential to meaningfully engage with the impact of coal mining on human health.     

A review of the sustainable value and disposal techniques, wastewater stabilisation ponds sludge characteristics and accumulation

Based on worldwide works available in international literature, this paper describes the status of sewage sludge resulting from settleable solids in waste stabilisation ponds (WSP). This review presents, in detail, sludge characteristics, production and accumulation rates in order to provide background information to those who expect to advise or get involved with sewage disposal in situations where resources are limited. Knowing that several years are usually required for a sludge removal operation and that the long-term sustainability of WSP systems is dependent on the safe and effective management of their sludge, its cost must be estimated and taken into account in the annual maintenance costs of the processes. Thus, this paper intends to summarise desludging methods and their financial estimation. Even when ponds have been functioning for several years, most of the sediments are stabilised well, the final disposal is an issue in terms of risk due, for example, to their content in nematode eggs. More generally, the pathogen content in sludge from WSP ponds has to be known to define an appropriate management and to safeguard public health. Based on existing data, the rates and distribution of helminth eggs will be presented and practical treatment methods will be suggested. A number of sludge utilisation and disposal pathways will also be summarised. Sludge activity in terms of oxygen consumption is also discussed in order to gather more information to improve pond design and keep an economic and sustainable value of WSP. The objectives of the present review are to advance knowledge and gather scientific and technical information on all aspects of sludge management including production, characterisation, management, agricultural reuse and ultimate disposal.     

Assessment of environmental benefits of flyover construction over signalized junctions: a case study

In the present study, the impact of the flyover construction to curb traffic congestion problem has been assessed in terms of traffic decongestion, time saving, fuel saving and emission reduction. A flyover has also been constructed over four signalized junctions in the main commercial area in Nagpur city, India. It was found that about 35% of the total traffic is diverted to the flyover, which results in a reduction of about 32% in the total emission generation. Travel on the flyover resulted in as much as 60-70% saving in time, compared to the travel on the main road, particularly when all the four signals are found to be in the red phase. The loss of fuel for combustion and the associated cost resulting from waiting for the signal to change are also estimated, and these are found to be significant.     

顺序注射平台-分光光度法测定水中总磷

参照希思迪在线总磷分析仪和荷兰Skalar在线过程分析仪测定水中总磷的方法,对顺序注射平台分析技术进行改进,从而建立了钼酸铵分光光度法测定水中正磷酸盐的快速分析方法,该方法集微功耗、微量试剂消耗于一体。注射平台具有模块化、投入式探头等结构特征,仪器包含3个检测量程,适用于环境监测等领域的实时在线分析。实验选择磷酸蓝的测定吸收波长为880 nm,当总磷质量浓度为0.10~2.00 mg/L时,浓度与吸光度呈线性关系,线性回归方程y=0.970 3x-0.025 3,相关系数为0.999 5,方法的检出限为1.36×10-2mg/L。     

A strategic management model for evaluation of health,safety and environmental performance

Strategic health, safety, and environmental management system (HSE-MS) involves systematic and cooperative planning in each phase of the lifecycle of a project to ensure that interaction among the industry group, client, contractor, stakeholder, and host community exists with the highest level of health, safety, and environmental standard performances. Therefore, it seems necessary to assess the HSE-MS performance of contractor(s) by a comparative strategic management model with the aim of continuous improvement. The present Strategic Management Model (SMM) has been illustrated by a case study and the results show that the model is a suitable management tool for decision making in a contract environment, especially in oil and gas fields and based on accepted international standards within the framework of management deming cycle. To develop this model, a data bank has been created, which includes the statistical data calculated by converting the HSE performance qualitative data into quantitative values. Based on this fact, the structure of the model has been formed by defining HSE performance indicators according to the HSE-MS model. Therefore, 178 indicators have been selected which have been grouped into four attributes. Model output provides quantitative measures of HSE-MS performance as a percentage of an ideal level with maximum possible score for each attribute. Defining the strengths and weaknesses of the contractor(s) is another capability of this model. On the other hand, this model provides a ranking that could be used as the basis for decision making at the contractors’ pre-qualification phase or during the execution of the project.