1970–1972: Years of transition

This paper describes events and interactions among scholars from the Geography and Psychology Departments at Clark University during the late 1960s. These events and interactions led to the establishment of a vigorous, informal program of training and research on the environment and behavior. The paper also describes an on-going, long-term organismic-developmental, systems-oriented research program which is an outgrowth of that activity. Paradigmatic research on critical person-in-environment transitions and open problems and issues are discussed.     

Benefit–Cost Analysis of StormwaterQuality Improvements

The major purpose of this paper is to explore the potential value of benefit–cost evaluation for stormwater quality management decisions at a local level. A preliminary benefit–cost analysis (BCA) screening method is used for maximum extent practicable (MEP) analysis, identifying promising management practices, and identifying societal and economic tradeoffs for local stormwater problems. Ballona Creek, a major urban storm drain in Los Angeles, California, USA, is used to illustrate the practicality of the benefit–cost evaluation. The Ballona Creek example demonstrates the economic limits of stormwater management in an urban region and attests to the value of coordinated basinwide management compared to uncoordinated management by individual landowners. Evaluation results suggest that in urban areas, the benefit of stormwater quality improvements might be far greater if accompanied by comprehensive redesign of drainage networks and neighboring land uses. In this case, benefit–cost analysis is found to be useful for evaluating and understanding stormwater management alternatives despite the uncertainties in characterizing stormwater quality and the effects of stormwater management on improving receiving water quality.     

Water–energy–greenhouse gas nexus of urban water systems: Review of concepts,state-of-art and methods

Water supply and wastewater services incur a large amount of energy and GHG emissions. It is therefore imperative to understand the link between water and energy as their availability and demand are closely interrelated. This paper presents a literature review and assessment of knowledge gaps related to water–energy–greenhouse gas (GHG) nexus studies in an urban context from an ‘energy for water’ perspective. The review comprehensively surveyed various studies undertaken in various regions of the world and focusing on individual or multiple subsystems of an urban water system. The paper also analyses the energy intensity of decentralized water systems and various water end-uses together with the major tools and models used. A major gap identified from this review is the lack of a holistic and systematic framework to capture the dynamics of multiple water–energy–GHG linkages in an integrated urban water system where centralized and decentralized water systems are combined to meet increased water demand. Other knowledge gaps identified are the absence of studies, peer reviewed papers, data and information on water–energy interactions while adopting a ‘fit for purpose water strategy’ for water supply. Finally, based on this review, we propose a water–energy nexus framework to investigate ‘fit-for-purpose’ water strategy.     

Bioremediation of Soils by Plant–Microbe Systems

Abstract

Sustainable ecosystems can be designed to eliminate environmental toxins and reduce pathogen loads through the direct and indirect consequences of plant and microbial activities. We present an approach to the bioremediation of disturbed environments, focusing on petroleum hydrocarbon (PHC) contaminants. Treatment consists of incorporating a plant-based amendment to enhance ecosystem productivity and physiochemical degradation followed by the establishment of plants to serve as oxidizers and foundations for microbial communities. Promising amendments for widespread use are entire plants of the water fern Azolla and seed meal of Brassica napus (rapeseed). An inexpensive byproduct from the manufacture of biodiesel and lubricants, rapeseed meal is high in nitrogen (6% wt/wt), stimulates >100-fold increases in populations of resident Streptomyces species, and suppresses fungal infection of roots subsequently cultivated in the amended soil. Synergistic enzymatic and chemical activities of plant and microbial metabolism in root zones transform and degrade soil contaminants. Emphasis is given to mechanisms that enable PHC functionalization via reactive molecular species.     

Assessment of Eutrophication in Estuaries: Pressure–State–Response and Nitrogen Source Apportionment

A eutrophication assessment method was developed as part of the National Estuarine Eutrophication Assessment (NEEA) Program. The program is designed to improve monitoring and assessment of eutrophication in the estuaries and coastal bays of the United States with the intent to guide management plans and develop analytical and research models and tools for managers. These tools will help guide and improve management success for estuaries and coastal resources. The assessment method, a Pressure-State-Response approach, uses a simple model to determine Pressure and statistical criteria for indicator variables (where applicable) to determine State. The Response determination is mostly heuristic, although research models are being developed to improve that component. The three components are determined individually and then combined into a single rating. Application to several systems in the European Union (E.U.), specifically in Portugal, shows that the method is transferable, and thus is useful for development of management measures in both the Unites States and E.U. This approach identifies and quantifies the key anthropogenic nutrient input sources to estuaries so that management measures can target inputs for maximum effect. Because nitrogen is often the limiting nutrient in estuarine systems, examples of source identification and quantification for nitrogen have been developed for 11 coastal watersheds on the U.S. east coast using the WATERSN model. In general, estuaries in the Northeastern United States receive most of their nitrogen from human sewage, followed by atmospheric deposition. This is in contrast to some watersheds in the Mid-Atlantic (Chesapeake Bay) and South Atlantic (Pamlico Sound), which receive most of their nitrogen from agricultural runoff. Source identification is important for implementing effective management measures that should be monitored for success using assessment methods, as described herein. For instance, these results suggest that Northeastern estuaries would likely benefit most from improved sewage treatment, where as the Mid and South Atlantic systems would benefit most from agricultural runoff reductions.     

Management of mountain areas in Norway and the persistence of local–national conflicts

We have investigated why conflicts linked to the distribution of power between governments and actors at the national and local levels concerning environmental management of mountain areas in Norway persist despite political intentions to strengthen local powers. We seek to explain this by analysing changes in policies, institutional frameworks, and regional contexts, and the local perceptions of these changes. Paradoxically, the national government's power has apparently been strengthened by new sectoral regulations and more stringent enforcement of the existing ones, increases in the number and extent of protected areas, and failures to act on intentions to devolve power. An additional factor spurring conflicts is the increased importance of tourism to mountain communities. To become more relevant to policies and development in mountain areas, future studies on multilevel governance must address multilevel politics, entire mountain areas, and the context of their development, rather than focusing on minor projects and protected areas.     

Some 2D–3D aspects of shielding of longitudinal sources of extremely low frequency magnetic fields

Typical sources of extremely low frequency magnetic fields include components of the power network and, as an extension, AC railway powering. The majority of these sources have longitudinal shapes. There is sometimes the need to reduce these fields in specific areas of interest. In this article, practical aspects are studied of shielding design when this type of source is involved. The focus is on design features not often treated in the shielding literature. One aspect relates to the differences between 2D and 3D simulations and experimental validation for a relatively long system of conductor and shield; as an example, the screening of the magnetic field of a railway system is presented. Another aspect relates to issues that arise when edge effects become relevant for actual systems. It is established that shielding factors are considerably improved when shielding of the edges is properly taken into account. The presence of gaps or loose contacts that are often responsible for low shielding efficiency is also studied. Experimental tests show that overlapping shields or the use of conductive patches significantly improves shielding efficiency. A last aspect is related to cost-effectiveness of shielding designs; in this case, numerical computations are used for benchmarking shielding properties for long busbars in secondary substations.     

Analysis of emission reduction in ethyne–biodiesel-aspirated diesel engine

The present experimental work investigates the use of ethyne gas in biodiesel-fueled diesel engine at different flow rate of 1, 2, and 3 L/min and is compared with diesel operation. This work is aimed to examine the outcome of ethyne gas by dual-fuel operation on emission characteristics of neat biodiesel-fueled stationary diesel engine. The oil derived from mustard seeds are employed as a source for biodiesel. The work was carried out at 2100 rpm (speed) and at an optimal compression ratio of 17. Based on the outcome of this investigation, the maximum reduction in hydrocarbon (25.1%), carbon monoxide (17.24%), and smoke emission (24.8%) was observed for biodiesel–ethyne at 3 L/min than the neat biodiesel. However, NO_x emissions were found to be 15.8% higher for ethyne–biodiesel fueling at 3 L/min owing to increase in combustion gas temperature than neat biodiesel.     

Numerical estimation of photovoltaic–electrolyzer system performance on the basis of a weather database

We performed a numerical simulation to investigate the performance of a photovoltaic (PV)–electrolyzer on the basis of a simulated weather database during the summer solstice (SS), autumnal equinox (AE), and winter solstice (WS), and all year round. First, we selected a location in southern Taiwan (latitude: 22.65°N) to create a local weather simulation database that included daily solar radiation, wind speed, and ambient temperature. The I–V curves of a PV system and an electrolyzer were obtained numerically by using Simpson integration computation. Subsequently, the optimal configuration of a PV driving system comprising the electrolyzer and the PV panel was determined. The database of weather conditions was input into the numerical estimation model of the PV–electrolyzer system, and the hydrogen generation rates and hydrogen production volumes under both clear skies and changeable weather conditions were obtained.     

Experimental investigation of wellbore integrity and CO2–brine flow along the casing–cement microannulus

Wellbore integrity is one of the key performance criteria in the geological storage of CO₂. It is significant in any proposed storage site but may be critical to the suitability of depleted oil and gas reservoirs that may have 10’s to 1000’s of abandoned wells. Much previous work has focused on Portland cement which is the primary material used to seal wellbore systems. This work has emphasized the potential dissolution of Portland cement. However, an increasing number of field studies (e.g., Carey et al., 2007), experimental studies (e.g., Kutchko et al., 2006) and theoretical considerations indicate that the most significant leakage mechanism is likely to be flow of CO₂ along the casing–cement microannulus, cement–cement fractures, or the cement–caprock interface.In this study, we investigate the casing–cement microannulus through core-flood experiments. The experiments were conducted on a synthetic wellbore system consisting of a 5-cm diameter sample of cement that was cured with an embedded rectangular length of steel casing that had grooves to accommodate fluid flow. The experiments were conducted at 40 $°$ C and 14 MPa pore pressure for 394 h. During the experiment, 6.2 l of a 50:50 mixture of supercritical CO₂ and 30,000 ppm NaCl-rich brine flowed through 10-cm of limestone before flowing through the 6-cm length cement–casing wellbore system. Approximately 59,000 pore volumes of fluid moved through the casing–cement grooves. Scanning electron microscopy revealed that the CO₂–brine mixture impacted both the casing and the cement. The Portland cement was carbonated to depths of 50–250 $\mu$m by a diffusion-dominated process. There was very little evidence for mass loss or erosion of the Portland cement. By contrast, the steel casing reacted to form abundant precipitates of mixed calcium and iron carbonate that lined the channels and in one case almost completely filled a channel. The depth of steel corroded was estimated at 25– $30\mu$m and was similar in value to results obtained with a simplified corrosion model.The experimental results were applied to field observations of carbonated wellbore cement by Carey et al. (2007) and Crow et al. (2009) to show that carbonation of the field samples was not accompanied by significant CO₂–brine flow at the casing–cement interface. The sensitivity of standard-grade steel casing to corrosion suggests that relatively straight-forward wireline logging of external casing corrosion could be used as a useful indicator of flow behind casing. These experiments also reinforce other studies that indicate rates of Portland cement deterioration are slow, even in the high-flux CO₂–brine experiments reported here.     

Strength and durability characterization of pelletized coal–biomass household briquettes

Increase in waste sludge disposal is always seen as a problem from the point of production industry. However, it is clear that the reuse and recycle of sewage sludge could be a serious economic input. The most important action should be to determine the sludge characterizations and direct the producers towards appropriate reuse and recycling opportunities. In this study, reuse method was examined to produce coal briquette, which will constitute an example for waste sludge. In order to make use of the waste sludge, five different coal briquette samples were produced by mixing powdered coal and bitumen together with waste sludge, at different ratios. The overall results indicated that the sample named CB3 having 70% powdered coal, 20% waste sludge, and 10% bitumen was found to be the optimum coal briquette among the other samples produced. The proximate analysis of the optimum briquette sample was carried out according to the Turkish standards and regulations and it was found out that the produced briquette coal can have commercial value with a gross calorific value of 30.03 MJ/kg and 7.30% ash content.     

Vegetation Composition,Dynamics, and Management of a Bracken–Grassland and Northern–Dry Forest Ecosystem

We investigated differences in vegetation composition and dynamics for two globally rare ecosystems, bracken–grasslands and northern–dry forests of northern Wisconsin. These ecosystems commonly have been viewed as degraded pine barrens. Bracken–grasslands contained a high dominance of exotic species, low native richness, and no obvious prairie species, suggesting logging-era anthropogenic origins. Differences in cover for common plants among ecosystems were examined using Mann-Whitney U tests of equivalence. Cover of all 8 graminoid species, 4 of 5 Ericaceae and Myricaceae species, and 10 of 17 species of forbs were significantly different between ecosystems. Vegetation changes over a 4-year period were examined through detrended correspondence analysis (DCA) and analysis of variance (ANOVA) repeated measures. DCA analyses of community composition failed to detect significant temporal trends within individual management units, although differences were apparent between ecosystems, regardless of sample year. In addition, no apparent patterns could be detected between years when comparing dominant individual species to management history (prescribed fire). This is contrary to what would be expected for a degraded pine barrens and questions the efficacy of using repeated prescribed fire as a management tool in bracken–grasslands. Methods for conservation and restoration of xeric ecosystems of northern Wisconsin have historically relied heavily on single species (e.g., sharp-tailed grouse) wildlife models, without full consideration of other factors. We suggest that stakeholders involved in these restoration projects examine historic processes and reference conditions prior to formulating management goals. Greater attention to the differentiation and individual management needs of pine barrens, northern–dry forests, and bracken–grasslands is needed.     

Investing in fertilizer–mining companies in times of food scarcity

The primary goal of the paper is to show the validity of investing capital in fertilizer–mining companies, both from a market return perspective for individual or institutional investors, or from a hedging standpoint for insurance companies and other economic actors exposed to inflation risk and high agricultural commodity prices. After providing some elements on the fertilizer market and describing the joint dynamics of corn, wheat and fertilizer prices over the last decade, we analyze an exhaustive sample of listed fertilizer producing companies over the years January 2004–December 2012. We show that their shares generated quite good returns over the whole period and extremely high ones during the years January 2004–December 2007, both in absolute terms and compared to their betas. We also exhibit that these returns display higher sensitivities to major agricultural indexes than to the World Bank Fertilizer Index, making the hedging argument quite compelling.     

An Eco-balance of a Recycling Plant for Spent Lead–Acid Batteries

This study applies Life Cycle Assessment (LCA) methodology to present an eco-balance of a recycling plant that treats spent lead–acid batteries. The recycling plant uses pyrometallurgical treatment to obtain lead from spent batteries. The application of LCA methodology (ISO 14040 series) enabled us to assess the potential environmental impacts arising from the recycling plants operations. Thus, net emissions of greenhouse gases as well as other major environmental consequences were examined and hot spots inside the recycling plant were identified. A sensitivity analysis was also performed on certain variables to evaluate their effect on the LCA study. The LCA of a recycling plant for spent lead–acid batteries presented shows that this methodology allows all of the major environmental consequences associated with lead recycling using the pyrometallurgical process to be examined. The study highlights areas in which environmental improvements are easily achievable by a business, providing a basis for suggestions to minimize the environmental impact of its production phases, improving process and company performance in environmental terms.     

The Fish Fauna of the Doubs River Prior to Completion of the Rhine–Rhône Connection

/ The part of the Doubs River between Montbeliard and Dole (France), i.e., downstream from the confluence with the Allan River, will be affected by the Rhine- Rhone connection project. In order to improve the understanding of the Doubs ichthyofauna, aquatic environments of the Doubs were sampled by electrofishing. Fish diversity and the presence of some rheophilic species demonstrated the good ecological quality of some stretches of the Doubs. This quality was due to alternating areas with very diversified aquatic environments (riffles, islands and side-arms, backwaters) and a considerable range of flow velocities. The differences in the structure of the fish communities of the different types of aquatic environments were more qualitative (fish species) than quantitative (number of species and number of fish). However, the mean number of fish was statistically lower in the canals (Freycinet canal and channelized part of the Allan River) than in the main course and in the backwaters. The natural parts of the Doubs (unnavigable reaches) showed the most diversified environmental structure and had the most rheophilic fish communities. Thus, the rheophilic species were well represented, but they proved also the most vulnerable to river regulation. However, the most abundant fishes throughout the Doubs River were generalists with no special requirements for food sources or spawning substrate.KEY WORDS: Fish communities; Regulation; Restoration; Floodplain; Large ship canal; Doubs River     

Updraft gasification of juniper wood biomass using CO2–O2 and Air (N2–O2)

Biomass gasification is being considered as one of the most promising technologies for converting low-quality solid biomass fuel into gaseous fuel. Redberry juniper (Juniperus pinchotii), one of the woody species that dominate uncultivated lands in the southern great plains, USA, may have a great potential for bioenergy utilization. In this study, the results of gasification of juniper are presented. Juniper wood chips were gasified in an adiabatic fixed bed updraft gasifier using air and the mixture gas of carbon dioxide and oxygen (CO₂:O₂) as gasification medium. The effect of gasification parameters such as moisture contents, gasification mediums, and gasification temperature on produced gas properties and the tar yield were investigated. It was observed that oxy fuel gasification (the reaction of woody fuels with carbon dioxide) of juniper resulted in the increase of production of carbon monoxide, especially at higher peak gasification temperatures. As a result, the CO₂ gasification resulted in producing higher heating value gas (6264 kJ/nm³ with dilution of CO₂ and 19,750 kJ/nm³ inert free) compared to air gasification. For air gasification, it was observed that the updraft gasification produced large amount of the tar in the product gas (more than 100 g/nm³) for the fuels with moisture content between 6% and 11%. Generally, the tar yield increased with the increase of equivalence ratio (er) and moisture content. However, when the fuel moisture content reached 23.5%, the tar yield reduced significantly due low gasification temperature which reduced the less tar cracking.     

Application of a Physical Input–Output Table to Evaluate the Development and Sustainability of Continental Water Resources in Spain

Continental waters are complex resources in terms of a measurable physical quantity, and measuring them requires a good knowledge of total water availability. In this research, an accounting physical input–output table (PIOT) was applied to evaluate total water resources and gross annual availabilities at each stage of the natural-artificial water cycle. These stages are considered subsystems of a continental water resource system describing water transfers for an average year within 13 administrative basins of Spain. Water transfers between various subsystems are characterized by internal flows decreasing the water resource availabilities. The PIOT analysis establishes these internal flows, and the origins and final uses of the total resources for each subsystem. The input-output balance registered an unsustainable negative net accumulation in eight water basins. The PIOT analysis also allowed the calculation of significant indicators such as water resource developments (RDI) and their sustainable use (SUI). RDI and SUI demonstrate that groundwater is a critical resource affecting the environment (e.g., wetlands in the upper Guadiana) and the water supply (e.g., irrigation in the Segura basin). The results of this model suggest that above-/below-ground hydrological links are important when decisions have to be made in order to provide a satisfactory supply of water in Spain. The model integrates the different water basins under territorial criteria, and therefore it may be useful for the Spanish National Hydrological Plan.     

The territorial dimension of environmental sustainability in Italy along the urban–rural continuum

Single territories contribute in different ways to the transition towards a more environmentally sustainable development (SD), according to their structural features. This study returns a multi-dimensional picture of the territorial divides of environmental sustainability across Italy, analysing how it correlates with rurality, with a focus on the urban–rural continuum. Italy represents an interesting case study because of its peculiar territorial urban–rural structure. We first assess the environmental sustainability targets across Italian NUTS 3 regions and their capital cities using two composite sustainability indexes, by referring to both standard values (i.e. conforming to legislation) and optimum values (i.e. desired values). Then, we investigate the relationship between environmental sustainability and rurality. Results suggest that a positive link between the two exists, being stronger at city level. Among major policy implications, the environmental dimensions of territorial cohesion should be integrated more strongly in key European policies to reach a more balanced SD.