Studies on transitory laxative effects of sorbitol and maltitol: III: Alterations in serum contents due to laxative effects

Maltitol or sorbitol was administered in doses of 0.8 g/kg to 20 physically healthy subjects (10 males and 10 females) and 6 diabetic patients (3 males and 3 females). Maltitol and sorbitol caused diarrhea in 75% and 95% of the subjects, respectively. Stool was watery in most of the subjects. The serum concentration of each sweetening agent was as low as approximately 0.3 mg/dl 2 hours after administration. The serum concentrations of Na, K, Cl, BUN, glucose and insulin did not change 2 hours after administration.     

Studies on transitory laxative effects of sorbitol and maltitol I: Estimation of 50% effective dose and maximum non-effective dose

The dose-response relationship between low-caloric sweetening agents, sorbitol and maltitol, administered orally in single doses, and the induction of diarrheal symptoms was investigated. Seven healthy male and 7 healthy female Japanese each in their twenties, thirties, and forties, respectively, or a total of 42 subjects were admitted to the study. The 50% laxative effective dose of sorbitol was estimated to be 0.4 g/kg for males and 1.0 g/kg for females and that of maltitol was estimated to be 0.8 g/kg for both males and females. The maximum non-effective dose of sorbitol was estimated to be 0.15 g/kg for males and 0.3 g/kg for females and that of maltitol was estimated to be 0.3 g/kg for both males and females.     

Studies on oxygen toxicity after simultaneous administration of paraquat and chelate-forming agents in rats

The influence of intravenously administered mixtures of paraquat and the chelating agents CaNa₂-EDTA or dithiocarb on the toxicity of oxygen at normal pressure was studied in rats. No increase in toxic effects of the combination paraquat-oxygen was seen by additionally administered chelate-forming agents.This paper completes the investigations on oxygen toxicity after administration of various chelate-forming agents in mice¹.     

The effects of various soil factors and amendments on the degradation of pesticide mixtures

Soil disposal is the most common method of handling dilute pesticide wastes. The effects of several soil factors on the degradation of a pesticide mixture were investigated. Atrazine, captan, carbaryl, 2,4-D, diazinon, fenitrothion, and trifluralin were studied under varying laboratory conditions of soil type, pH, moisture content, organic matter content, microbial activity, and pesticide concentration. Of the variables investigated, pesticide concentration was the single most important factor with degradation rates much slower at high (1000 ppm) levels of fortification than moderate (100 ppm) levels. Under most conditions, chemical degradation was at least as significant as microbial degradation. Effects of other factors varied considerably and were pesticide dependent.     

Salinity effects on cadmium accumulation in various tissues of the tropical fiddler crab Uca rapax

Pollution of water and sediments by industrial discharges of heavy metals, mainly cadmium (Cd), threatens the biota of mangrove ecotones around the mouth of the Tuy river, in northern-central Venezuela. Short-term lethal Cd concentrations were determined in adult male Uca rapax collected from a clean site and kept in 75% seawater (SW). The 96-h LC50 obtained, 380 micromol (=43 mg) Cd liter(-1), is remarkably higher than values previously reported for other crustacean, mollusc or fish species. Tissue accumulation of Cd was examined in crabs acclimated to 125, 75 or 25% SW and exposed to sublethal CdCl2 levels ranging from 9.0 to 225 micromol liter(-1) (i.e. 1.0-25 mg Cd liter(-1)). The metal contents of carapace, gills, hepatopancreas, muscle and hemolymph rose pronouncedly at the highest concentration tested and particularly in the crabs treated in dilute (=25%) SW. In the latter, analyses of the relative distribution of whole-body Cd burden showed that about 80% is in the carapace, 2.4% in the gills, 4% in hepatopancreas, 3% in muscle, 9.3 in other viscerae, 1% is bound to the dried solids of hemolymph and ca. 0.2% appears to be in solution in this fluid. Exposure of crabs to Cd in dilute SW enhances the rates of entry or uptake of the metal, possibly mediated by Ca2+ transport mechanisms, and may exceed the detoxifying capacity of organs such as the hepatopancreas. Thus, Cd may be more harmful to crab populations experiencing frequent fluctuations of ambient salinity, such as are usual in mangrove swamps.     

Translocation of metals and its effects in the tomato plants grown on various amendments of tannery waste: evidence for involvement of antioxidants

A field experiment was conducted to study the effect of different amendments of tannery sludge on physiological and biochemical parameters of tomato plant (Lycopersicon esculentum L. Mill). The accumulation of metals (Cr, Fe) in different parts of tomato plants grown on tannery sludge amended soil increased in a concentration and duration-dependent manner. The accumulation of both the metals was found lowest in the fruits of the plant. The statistical analysis of the results showed an increase in chlorophyll and protein contents in lower sludge amendment ratio at all exposures followed by a decrease at highest (100%) sludge amendment ratio. Lipid peroxidation enhanced in both root and leaves of sludge grown plants of tomato at all the sludge amendments and exposure periods, which is evidenced by increased malondialdehyde content, however the maximum increase was found in the roots (43.63%) and leaves (56.66%) of the plant grown on 100% tannery sludge at 60 d, over respective controls. The level of antioxidants, cysteine, non-protein thiol and ascorbic acid increased in the sludge grown plants of tomato to cope up with stress induced by the excess amount of the heavy metals present in the tannery sludge. The maximum increase was found in cysteine content (75.53% in the leaves), non-protein thiol content (92.68% in the roots) and ascorbic acid content (29.66% in the roots) of the plant at 75% tannery sludge after 30 d. The tomato plants were found well adopted for minimizing damage induced by reactive oxygen species, when grown on tannery sludge amendments in the present study.     

Temporal change in the distribution patterns of hexachlorobenzene and dichlorodiphenyltrichloroethane among various soil organic matter fractions

Residence time-dependent distribution patterns of hexachlorobenzene (HCB) and dichlorodiphenyltrichloroethane (DDT) among different soil organic matter fractions of three Chinese soils were investigated. Soil organic matter (SOM) was fractionated into fulvic acid (FA), humic acid (HA), bound-humic acid (BHA), lipid, and insoluble residue (IR) fractions using methyl isobutyl ketone (MIBK) method. Results revealed that as the residence time prolonged, the amounts of HCB and DDT in the FA, HA and BHA fractions decreased, while those in the lipid and IR fractions increased. One- and two-compartment first order, and one- and two-parameter pore-diffusion kinetic models were used to describe the mobility of HCB and DDT from the FA, HA and BHA fractions. The results suggest that excellent agreements were achieved between the experimental data and fits to the two-compartment first order kinetic model (R2>0.97). The transfer rates of HCB and DDT followed the order FA>HA>BHA.     

Studies on the effects of some organic pollutants on the heavy metal transport in an Indian soil

The translocation of some heavy metals, such as Hg, Cd, Cu, Co, Ni and Zn, as affected by organic pollutants, i.e. methanol, ethanol, propanol, formaldehyde, acetaldehyde, benzaldehyde, acetone, ethyl methyl ketone and cyclo-hexanone, was studied in an Indian red soil using soil thin layer chromatography. It was observed that an increase in the concentration of organic compounds in developer enhances the heavy metal mobility, except in the case of Cu and Hg which show a decreasing trend. The results are discussed in relation to the physico-chemical characteristics of the soil and adsorption/desorption phenomena.     

Studying the effects of calcium and magnesium on size-distributed nitrate and ammonium with EQUISOLV II

A chemical equilibrium code was improved and used to show that calcium and magnesium have a large yet different effect on the aerosol size distribution in different regions of Los Angeles. In the code, a new technique of solving individual equilibrium equations was developed. The technique, the analytical equilibrium iteration (AEI) method, gives the same solutions (to at least 7 decimal places) as the previous technique used, the mass-flux iteration (MFI) method, but consumes 13–48 times less computer time. The model was also updated to include treatment of potassium, calcium, magnesium, and carbonate. Previously, it treated only nitrate, ammonium, chloride, sulfate, and sodium. Predictions from the updated code, EQUISOLV II, were compared with data from an eight-stage Berner impactor at Long Beach, Claremont, and Riverside during the Southern California Air Quality Study. When any equilibrium solver is applied between the gas phase and multiple aerosol size bins, unique solutions are possible only when solids (e.g., NH₄NO₃) that form from two gas-phase species are absent. For this study, unique solutions were possible only when the relative humidity exceeded 62%, and only cases in this regime are discussed. Base-case predictions of nitrate and ammonium matched observations well in most size bins of every case. When Ca and Mg were removed from calculations, coarse-mode nitrate decreased at Long Beach, as expected, to maintain charge balance. At Riverside, removing Ca and Mg had the opposite effect, increasing coarse-mode nitrate, shifting it from the accumulation mode. The reason is explained in terms of mean mixed activity coefficients. At Claremont, the charge-balance and activity-coefficient effects nearly canceled each other.     

The use of XAD-resins for the detection of mutagenic activity in water: II. Studies with drinking water

The combined XAD-4/8-Ames test procedure for concentrating and detecting trace amounts of organic mutagens, as already described for surface water, is shown to be suitable for drinking water as well. DMSO is as effective as acetone in eluting the adsorbed mutagens, and optimal recovery of overall mutagenic activity is observed at a flow rate of 2–4 bed volumes/min. The drinking water of 6 cities in The Netherlands, which prepare their drinking water from the rivers Rhine and Meuse, has been tested for mutagenic activity. Mutagenic activity could be demonstrated in 4 cities. Dose-related responses are observed with concentrates of as little as 500 ml of drinking water and the 4 cities clearly differ with regard to the type of mutations induced (TA 98 or TA 100) and the effect of metabolic activation. The absence of mutagenic activity in drinking water of 2 cities indicates that by a proper combination of treatment processes the organics which are responsible for the detected mutagenic activity in drinking water can be removed to a high degree.     

Utilization of Modified Attapulgite for the Removal of Sr(II), Co(II), and Ni(II) Ions from Multicomponent System,Part I: Kinetic Studies

Radionuclide sorption by natural and modified clays is extensively accepted to be an important process from the radioactive waste point of view. This work focused on modification of natural attapulgite with a layered double hydroxide to produce a novel chemisorbent for Sr2+, Ni2+, and Co2+ removal from multicomponent solution. The structural and surface characteristics of both attapulgite (ATP) and modified attapulgite (LDH-ATP) were investigated using XRD, FTIR, SEM, and thermal analysis. Comparison of sorption features of Sr2+, Ni2+, and Co2+ onto ATP and LDH-ATP was achieved; the results indicated that LDH-ATP was the most efficient sorbent for Sr2+, Ni2+, and Co2+. Kinetic studies established that the sorption is fast and reaching >90% within 30 min. The sorption of Sr2+, Ni2+, and Co2+ are well defined by non-linear pseudo-second-order model and controlled by an intra-particle diffusion mechanism. The diffusivity was determined using homogeneous surface diffusion (HSDM) model and found in the order 10−13 m2/min; this confirmed that the sorption of the three ions is chemisorption process. LDH-ATP can be employed as a candidate chemisorbent for the removal of some metal ions from waste solution.     

Monitoring of PBDEs concentration in umbilical cord blood and breast milk from Korean population and estimating the effects of various parameters on accumulation in humans

In this study, we investigated concentration, congener distribution pattern, and effects of potential environmental factors that affect PBDE accumulation. We also estimated correlation between PBDE concentration and health status or thyroid function by analyzing 90 cord blood and 21 breast milk samples obtained from Korean population. Seven from tri- to hepta-BDEs were analyzed by solid phase extraction-high-resolution gas chromatography/high-resolution mass spectrometry (SPE-HRGC/HRMS). The total concentration of 7 PBDEs in cord blood was 2.786-94.64 ng g(-1) lipid and that in breast milk was 1.076-8.664 ng g(-1) lipid. Tetra-BDE (#47) was the predominant type of PBDE and was present at concentrations of over 40% in both sample types. A weak correlation was observed between the concentration of BDE28 and 153 and thyroid hormone concentration only in the breast milk samples. In children, a weak negative correlation was observed between free thyroxine (FT4) concentration and BDE28 concentration (0.302, p<0.05), while in mothers, a weak positive correlation was observed between thyroid hormone concentration and BDE153 concentration (0.403, p<0.05). No significant correlations between PBDE concentration and work and residential environments were found in this study, but a weak correlation between BDE concentration in cord blood and potential PBDE sources was confirmed by investigating the frequency of oil paint usage (0.510, p<0.001). A weak correlation was also found between PBDE concentration in breast milk during pregnancy and dietary habits such as green tea drinking (0.541, p=0.025) and Trichiuridae intake (0.565, p=0.015).     

Studies on the accumulation and transformation of arsenic in freshwater organisms II. Accumulation and transformation of arsenic compounds by Tilapia mossambica

Bioaccumulation and biotransformation of arsenic (As) compounds in freshwater Tilapia mossambica was investigated. The direct accumulation of As by T mossambica was proportional to the concentration of arsenicals in water. Small amounts of accumulated As were transformed to methylated As, including trimethylarsenic (TMA) species. Accumulation and transformation of As(III) by T. mossambica via freshwater food chain results in the transformation of As(III) to As(V) with little biomethylation of accumulated As. Approximately 90% of accumulated As was depurated to water.     

Comparison of modified montmorillonite adsorbents. Part II: The effects of the type of raw clays and modification conditions on the adsorption performance

This paper builds on the preceding researches to study the effects of the type of clays (montmorillonites K10, KSF) and modifying conditions on the structure and adsorption behavior of resulting clay adsorbents. The raw clays were modified by polymeric Al/Fe species, hexadecyl-trimethylammonium (HDTMA) surfactant and a complex of polymeric Al/Fe-HDTMA. X-ray diffraction spectra was applied to analyze the structure of the raw and modified clays. After modification, the basal spacing of the clays varied, depending on the types of raw clay and modification conditions. Copper and phenol were selected as adsorbates for evaluating the adsorption performance of various clays, which was affected significantly by the types of raw clay and modification conditions. In general the inorganic contaminant (e.g., Cu) tend to be adsorbed by the polymeric Al/Fe modified clay and the organic impurities (e.g., phenol) will be preferably captured by the surfactant modified clay; both due to the specific surface properties resulting from introducing the modifiers. The complex modified clays possessed the ability of adsorbing both inorganic and organic contaminants. In addition, the d 0 0 1 spacing of modified KSF was greater than that of K10; the adsorption performance with modified KSF was thus greater than that with the modified K10. Finally, the ratio of modifiers to the clay (metal:surfactant:clay) has been observed to affect the adsorption performance; the optimal conditions have been defined.     

Siting a municipal solid waste disposal facility,Part II: The effects of external criteria on the final decision

The procedure of a multi-criteria decision analysis supported by the geographic information systems was applied to the site selection process of a planning municipal solid waste management practice based on twelve different scenarios. The scenarios included two different decision tree modes and two different weighting models for three different area requirements. The suitability rankings of the suitable sites obtained from the application of the decision procedure for the scenarios were assessed by a factorial experimental design concerning the effect of some external criteria on the final decision of the site selection process. The external criteria used in the factorial experimental design were defined as “Risk perception and approval of stakeholders” and “Visibility”. The effects of the presence of these criteria in the decision trees were evaluated in detail. For a quantitative expression of the differentiations observed in the suitability rankings, the ranking data were subjected to ANOVA test after a normalization process. Then the results of these tests were evaluated by Tukey test to measure the effects of external criteria on the final decision. The results of Tukey tests indicated that the involvement of the external criteria into the decision trees produced statistically meaningful differentiations in the suitability rankings. Since the external criteria could cause considerable external costs during the operation of the disposal facilities, the presence of these criteria in the decision tree in addition to the other criteria related to environmental and legislative requisites could prevent subsequent external costs in the first place.

Implications:

An experimental design was applied to a siting process based on different scenarios. The suitability rankings of suitable sites were obtained for each scenario. The external criteria used in the design were defined as perception and visibility. The presence of the external criteria produced meaningful differentiations. Two widespread persuasions about site selection were disproved using the results.     

Phenol photonitration upon UV irradiation of nitrite in aqueous solution II: effects of pH and TiO2.

Phenol photonitration and photonitrosation were studied both in homogeneous and in heterogeneous phase in the presence of TiO2 particles. The effect of pH as well as of the semiconductor particles on the kinetics and products of the reaction was observed. Formation of nitrophenols is enhanced at acidic pH, due to thermal processes initiated by nitrous acid, as well as in the presence of TiO2, due to the photocatalytic oxidation of nitrite.     

Using organic-certified rather than synthetic pesticides may not be safer for biological control agents: selectivity and side effects of 14 pesticides on the predator Orius laevigatus

The generalist predator Orius laevigatus (Fieber) (Hemiptera: Anthocoridae) is a key natural enemy of various arthropods in agricultural and natural ecosystems. Releases of this predator are frequently carried out, and it is included in the Integrated Pest Management (IPM) programs of several crops. The accurate assessment of the compatibility of various pesticides with predator activity is key for the success of this strategy. We assessed acute and sublethal toxicity of 14 pesticides on O. laevigatus adults under laboratory conditions. Pesticides commonly used in either conventional or organic farming were selected for the study, including six biopesticides, three synthetic insecticides, two sulfur compounds and three adjuvants. To assess the pesticides’ residual persistence, the predator was exposed for 3 d to pesticide residues on tomato sprouts that had been treated 1 h, 7 d or 14 d prior to the assay. The percentage of mortality and the sublethal effects on predator reproductive capacity were summarized in a reduction coefficient (E_x) and the pesticides were classified according to the IOBC (International Organization for Biological Control) toxicity categories. The results showed that the pesticides greatly differed in their toxicity, both in terms of lethal and sub lethal effects, as well as in their persistence. In particular, abamectin was the most noxious and persistent, and was classified as harmful up to 14 d after the treatment, causing almost 100% mortality. Spinosad, emamectin, metaflumizone were moderately harmful until 7 d after the treatment, while the other pesticides were slightly harmful or harmless. The results, based on the combination of assessment of acute mortality, predator reproductive capacity pesticides residual and pesticides residual persistence, stress the need of using complementary bioassays (e.g. assessment of lethal and sublethal effects) to carefully select the pesticides to be used in IPM programs and appropriately time the pesticides application (as function of natural enemies present in crops) and potential releases of natural enemies like O. laevigatus.     

Studies on the sorption and desorption characteristics of Zn(II) on the surface soils of nuclear power plant sites in India using a radiotracer technique

Zinc adsorption was studied in the soils of three nuclear power plant sites of India. 65Zn was used as a radiotracer to study the sorption characteristics of Zn(II). The sorption of zinc was determined at 25 and 45 degrees C at pH 7.8+/-0.2 in the solution of 0.01 M Ca(NO3)2 as supporting electrolyte. The sorption data was tested both in Freundlich and Langmuir isotherms and could be described satisfactorily. The effect of organic matter and other physico-chemical properties on the uptake of zinc was also studied in all the soil samples. The results showed that the cation exchange capacity, organic matter, pH and clay content were the main contributors to zinc sorption in these soils. The adsorption maximum was found to be higher in the soil on Kakarpara Atomic Power Plant sites soils having high organic matter and clay content. The zinc supply parameters of the soils are also discussed. In the desorption studies, the sequential extraction of the adsorbed zinc from soils showed that the diethylene triamine penta acetic acid extracted maximum amount of adsorbed zinc than CaCl2 and Mg(NO3)2. The zinc sorption on the soil and amount of zinc retention after extractants desorption shows a positively correlation with vermiculite and smectite mineral content present in the clay fraction of the soil. The amount desorbed by strong base (NaOH) and demineralised water was almost negligible from soils of all the sites, whereas the desorption by strong acid (HNO3) was 75-96% of the adsorbed zinc.