浅谈无锡市危险废物产生情况与处置现状

无锡市作为江苏重点发展的城市,随着社会和经济的快速发展,危险废物产生量和种类不断增多。文中针对无锡市2011年—2018年危险废物产生量、综合利用与处置情况,分析危险废物处置利用存在的问题,同时,就目前危险废物存在的问题,提出科学合理的建议。     

浅谈基层环保部门危险废物管理中的问题及对策

分析了国内现行的危险废物管理制度、标准及规范,结合基层管理的实践,指出了当前危险废物管理中存在的问题,提出了解决问题的对策和途径,并就危险废物实行行政代处置进行了探索和尝试。     

电子元件制造行业典型危险废物产生节点及处置建议

电子元件制造行业是国家战略性新兴行业,同时也是高污染的行业,其生产工艺具有更新换代快、中间产物多、排污方式复杂等特点.行业危险废物也具有来源多、成分复杂、产生量大等特点,若未经妥善处置而排放到环境中,会对环境造成巨大的危害.通过对印制电路板、铝电解电容器、半导体器件3类典型电子元件的工艺流程进行梳理,分析典型危险废物的...     

我国危险废物管理现状及发展趋势

本文介绍了我国危险废物产生量、分布特点、管理现状及发展趋势 ,分析了我国地方及云南省危险废物管理中存在的问题 ,提出了解决问题的对策和建议。     

我国危险废物管理现状及发展趋势

本文介绍了我国危险废物产生量、分布特点、管理现状及发展趋势，分析了我国地方及云南省危险废物管理中存在问题，提出了解决问题的对策和建议。     

苏南危险废物集中处理处置的可行性研究

从法律、技术、环境、经济以及社会层面,结合国际流行管理理念,对苏南危险废物处理处置现状进行了全面评估;提出了苏南危险废物综合管理方案以及废物减量化、资源化、收集、运输、处理处置的技术模式;未来危险废物处理厂的选址方法及标准;新建现代化废弃物物化处理厂、焚烧厂以及填埋场的实施方案。     

德国的工业危险废物管理

工业危险废物管理已是当务之急。德国有较成功的经验，文章介绍了德国对工业危险废物管理的过程和处理方法，供决策管理部门和同行借鉴。     

砒霜生产化工厂危险废物处置工程设计

通过对砒霜生产化工厂原场址废渣及污染场地调查的基础上,进行了处置方案比选及技术经济比较,确定了就地安全填埋的处置方案。根据区域性危险废物集中安全填埋场的设计经验,本工程采用先进的HDPE双层防渗的安全填埋方式,并设置了雨水分流系统、渗滤液收集系统、封场处理和填埋气体导排系统,整个场区布置合理,对周围环境的影响小,投资少,取得了良好的社会效益和环境效益,并对危险废物处理处置工程设计中应注意的问题提出了建议。     

浙江省危险废物和污泥处置现状及加强全过程监管工作的探讨

随着近几年经济发展水平的提高,浙江省的危险废物和污泥产生量呈不断增长趋势,它们的产生、贮存、转运和处置过程中的监管压力也逐年增大。总结了浙江省的危险废物产生现状,分析了存在的主要问题,对比了发达国家的相关管理经验,提出了进一步完善浙江省危险废物和污泥全过程监管工作的建议。     

危险废物豁免(排除)的管理体系研究

危险废物豁免(排除)是指按照一定的程序和豁免原则将一部分产生量小、分散、危害性低的危险废物从现有的危险废物管理体系中豁免或排除出来.系统分析了国外危险废物豁免(排除)管理体系研究现状和发展趋势,结合中国国情提出建立中国危险废物豁免(排除)管理体系的理论、方法、程序及相关原则,对尽快建立中国危险废物管理体系具有一定的借鉴意义.     

固体废物相关概念的基本特点

固体废物法对废物的一些概念进行了定义,在固体废物环境管理当中,对这些概念缺乏深入认识,导致在实际管理中对固体废物和危险废物的调查、认定、统计、管理、预测、设施建设等一系列与废物相关的行动出现偏差甚至不准确。对固体废物、危险废物以及废物利用、处置、贮存、排放等概念包含的内容进行了研究,提出了一些新的认识观点。     

Baseline levels of PCDD/Fs in soil and herbage samples collected in the vicinity of a new hazardous waste incinerator in Catalonia,Spain

The construction in Constantí (Catalonia, Spain) of a new hazardous waste incinerator (HWI), which is the first one in Spain, finished in 1999. In order to determine the temporal variation (1996–1998) in the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in the vicinity of the new HWI, 40 soil and 40 herbage samples were collected (1998) at the same sampling points in which samples had been taken two years before (1996). Each sample was analyzed for PCDDs and PCDFs by high resolution gas chromatography/high resolution mass spectrometry. In the 1996 survey, PCDD/F concentrations in soils ranged from 0.13 to 24.20 ng I-TEQ/kg (d.m.), with median and mean values of 0.67 and 1.68 ng I-TEQ/kg (d.m.), respectively. In the present study, PCDD/F concentrations ranged from 0.12 to 17.20 ng I-TEQ/kg (d.m.), with a median value of 0.75 ng I-TEQ/kg (d.m.) and a mean value of 1.59 ng I-TEQ/kg (d.m.). In turn, in the present study PCDD/F concentrations in vegetation ranged from 0.14 to 2.01 ng I-TEQ/kg (d.m.) (median and mean values: 0.23 and 0.31 ng I-TEQ/kg, respectively), while in the 1996 survey PCDD/F concentrations ranged from 0.24 to 1.22 ng I-TEQ/kg (d.m.) (median and mean values: 0.53 and 0.61 ng I-TEQ/kg, respectively). According to the present (1998) and the previous (1996) levels of PCDD/Fs found in soils and vegetation, the area under potential influence of the new facility shows a rather low contamination by these compounds. The current results should be useful to establish the environmental impact of the HWI.     

厨余垃圾粉碎机应用的环境影响研究现状与展望

为探究厨余垃圾粉碎机(food waste disposer,FWD)应用后的潜在环境影响,分别从生活垃圾减量化效益,垃圾处理系统能量流变化,碳减排效益,酸化以及富营养化效应等方面系统地梳理针对该设备的当前研究进展。结果表明,FWD的应用可实现厨余垃圾的源头分离,直接减少了城市生活垃圾的收运数量,但系统的净能源产出仍存在不确定性;FWD在降低碳排放和酸化效应方面有正向作用,但会增加富营养化效应。未来研究重点建议聚焦于本地化的清单数据挖掘,深化厌氧消化模式和FWD模式的环境影响的对比研究,分析FWD普及率阈值与环境影响的相互关系,以及探究FWD应用的新模式。     

Assessment of polychlorinated dibenzo-p-dioxin and dibenzofuran emissions from a hazardous waste incineration plant using long-term sampling equipment

The aim of this work is to evaluate the performance of a continuous monitoring system for the analysis of the mass concentration of PCDD/Fs from stationary sources. Data was acquired from a modern, state of the art, hazardous waste thermal treatment plant for a period of more than 2 years using a commercial available continuous monitoring system. The study consisted of a total of 16 samples, collected in periods from 1 week to 2 months resulting in an average of 360 m³ sampled flue gas per sample. The study showed the system was able to confirm that for a period of more than 2 years the plant was complying with the limit of 0.1 ng I-TEQ/Nm³. In addition, the data showed the typical fingerprint of such installations which is useful for example in impact studies. Long-term samples were compared to five short-term samples (6 h) collected every 6 months during the study period. Principal component analysis was applied to PCDD/Fs obtained data as useful statistical tool to find out trends and similarities between different samples. Improvement in terms of representativeness of data was achieved through continuous assessment since the starts of the project. The obtained data was further used to determine the emission factor for this activity and the total annual PCDD/Fs release to the atmosphere.     

Towards sets of hazardous waste indicators. Essential tools for modern industrial management

Decision-makers require useful tools, such as indicators, to help them make environmentally sound decisions leading to effective management of hazardous wastes. Four hazardous waste indicators are being tested for such a purpose by several countries within the Sustainable Development Indicator Programme of the United Nations Commission for Sustainable Development. However, these indicators only address the 'down-stream' end-of-pipe industrial situation. More creative thinking is clearly needed to develop a wider range of indicators that not only reflects all aspects of industrial production that generates hazardous waste but considers socio-economic implications of the waste as well. Sets of useful and innovative indicators are proposed that could be applied to the emerging paradigm shift away from conventional end-of-pipe management actions and towards preventive strategies that are being increasingly adopted by industry often in association with local and national governments. A methodological and conceptual framework for the development of a core-set of hazardous waste indicators has been developed. Some of the indicator sets outlined quantify preventive waste management strategies (including indicators for cleaner production, hazardous waste reduction/minimization and life cycle analysis), whilst other sets address proactive strategies (including changes in production and consumption patterns, eco-efficiency, eco-intensity and resource productivity). Indicators for quantifying transport of hazardous wastes are also described. It was concluded that a number of the indicators proposed could now be usefully implemented as management tools using existing industrial and economic data. As cleaner production technologies and waste minimization approaches are more widely deployed, and industry integrates environmental concerns at all levels of decision-making, it is expected that the necessary data for construction of the remaining indicators will soon become available.     

我国厨余垃圾处理模式的综合比较和优化策略

如何选择厨余垃圾处理模式以实现环境、经济效益的最大化是生活垃圾分类工作中的一个关键问题,但目前还缺乏系统分析。以回收利用率、碳排放和全周期费用为衡量指标,综合比较了混合焚烧、厌氧消化、好氧堆肥和饲料化4种厨余垃圾处理模式。结果表明,饲料化的环境效应最好,其回收利用率为80%~95%,碳排放(以二氧化碳当量计)为−112~−67 kg·t⁻¹。同时发现,厌氧消化也具有较好的环境效应,回收利用率可达31%~42%,而碳排放为−209~−65 kg·t⁻¹。好氧堆肥可以产生肥料并通过腐殖化固定有机碳,其回收利用率与厌氧消化接近,但一旦其温室气体泄漏,则会导致显著的碳排放;好氧堆肥在充分供氧的条件下,碳排放可以从420 kg·t⁻¹降低至10 kg·t⁻¹。厨余垃圾含水率高,混合焚烧发电的回收利用率仅为9%,碳减排效应可忽略;但通过热电联产提高系统热效率则可以实现碳减排。混合焚烧的全周期费用最低,而分类处理的全周期费用则比之高出125元·t⁻¹,这些费用主要来自于垃圾分类工作开始阶段的宣教、监管支出。综和考虑以上各项研究结果可得出结论,厨余垃圾处理模式的优先顺序为：饲料化、厌氧消化、好氧堆肥、混合焚烧。     

危险废物事故排放的河流水环境健康风险评价

分析了基于水体中污染物迁移转化方程的水质预测模型,并借鉴美国环保局推荐使用的健康风险评价模型,建立了一种危险废物事故排放时水环境对人体健康风险的评价方法。以电镀污泥为例验证了该方法的有效性。结果显示:该方法需要参数少且计算简单;电镀污泥中目标污染物(Cr、Cu、Ni、Zn)所引起的河流水环境非致癌风险(1.67)超过了美国标准中的可接受风险水平1.00,不可接受;致癌风险(0.88E-11)则小于美国标准中的可接受风险水平1.00E-06,风险不明显。