Locating pollutant emission sources with optical remote sensing measurements and an improved one-dimensional radial plume mapping technique

Previous studies have shown that there was a relatively large amount of uncertainty along the major wind direction in the results of locating emission sources using the one-dimensional radial plume mapping (RPM(1D)) technique based on optical remote sensing measurements. This paper proposes setting up an additional monitoring line that is perpendicular to the original scanning beam geometry to reduce this uncertainty. We first conducted a computer simulation study using the Gaussian dispersion model to generate the downwind concentrations of plumes from 400 source locations in a 201 m × 201 m spatial domain under various wind directions (n = 181). The optical remote sensing instrument was assumed to be at (0, 0) with two perpendicular monitoring lines, each of which had three beam segments of equal length. Each pair of the reconstructed downwind concentration profiles was then used to trace back to the source locations. The results showed that the accuracy of the method and its uncertainty were improved by using the proposed two-line RPM(1D) approach rather than the original one-line RPM(1D) approach at most simulated source locations. In a follow-up field experiment, a tracer gas was released at the coordinate of (100, 100). The release location was covered within the 0.25- to 0.5-probability area of the estimated results, and the distance between the actual and estimated source locations was 18.4 m (9.2% of the longest beam path).     

Optimal Expansion of Water Quality Monitoring Network by Fuzzy Optimization Approach

River reaches are frequently classified with respect to various mode of water utilization depending on the quantity and quality of water resources available at different location. Monitoring of water quality in a river system must collect both temporal and spatial information for comparison with respect to the preferred situation of a water body based on different scenarios. Designing a technically sound monitoring network, however, needs to identify a suite of significant planning objectives and consider a series of inherent limitations simultaneously. It would rely on applying an advanced systems analysis technique via an integrated simulation-optimization approach to meet the ultimate goal. This article presents an optimal expansion strategy of water quality monitoring stations for fulfilling a long-term monitoring mission under an uncertain environment. The planning objectives considered in this analysis are to increase the protection degree in the proximity of the river system with higher population density, to enhance the detection capability for lower compliance areas, to promote the detection sensitivity by better deployment and installation of monitoring stations, to reflect the levels of utilization potential of water body at different locations, and to monitor the essential water quality in the upper stream areas of all water intakes. The constraint set contains the limitations of budget, equity implication, and the detection sensitivity in the water environment. A fuzzy multi-objective evaluation framework that reflects the uncertainty embedded in decision making is designed for postulating and analyzing the underlying principles of optimal expansion strategy of monitoring network. The case study being organized in South Taiwan demonstrates a set of more robust and flexible expansion alternatives in terms of spatial priority. Such an approach uniquely indicates the preference order of each candidate site to be expanded step-wise whenever the budget limitation is sensitive in the government agencies.     

Analysis of multi-temporal landsat satellite images for monitoring land surface temperature of municipal solid waste disposal sites

This studypresents a remote sensing application of using time series Landsat satellite images for monitoring the Trail Road and Nepean municipal solid waste (MSW) disposal sites in Ottawa, Ontario, Canada. Currently, the Trail Road landfill is in operation; however, during the 1960s and 1980s, the city relied heavily on the Nepean landfill. More than 400 Landsat satellite images were acquired from the US Geological Survey (USGS) data archive between 1984 and 2011. Atmospheric correction was conducted on the Landsat images in order to derive the landfill sites’ land surface temperature (LST). The findings unveil that the average LST of the landfill was always higher than the immediate surrounding vegetation and air temperature by 4 to 10 °C and 5 to 11.5 °C, respectively. During the summer, higher differences of LST between the landfill and its immediate surrounding vegetation were apparent, while minima were mostly found in fall. Furthermore, there was no significant temperature difference between the Nepean landfill (closed) and the Trail Road landfill (active) from 1984 to 2007. Nevertheless, the LST of the Trail Road landfill was much higher than the Nepean by 15 to 20 °C after 2007. This is mainly due to the construction and dumping activities (which were found to be active within the past few years) associated with the expansion of the Trail Road landfill. The study demonstrates that the use of the Landsat data archive can provide additional and viable information for the aid of MSW disposal site monitoring.     

Coupling GIS and mulitvariate approaches to reference site selection for wadeable stream monitoring

Geographic Information System (GIS) was used to identify potential reference sites for wadeable stream monitoring, and multivariate analyses were applied to test whether invertebrate communities reflected a priori spatial and stream type classifications. We identified potential reference sites in segments with unmodified vegetation cover adjacent to the stream and in >85% of the upstream catchment. We then used various landcover, amenity and environmental impact databases to eliminate sites that had potential anthropogenic influences upstream and that fell into a range of access classes. Each site identified by this process was coded by four dominant stream classes and seven zones, and 119 candidate sites were randomly selected for follow-up assessment. This process yielded 16 sites conforming to reference site criteria using a conditional-probabilistic design, and these were augmented by an additional 14 existing or special interest reference sites. Non-metric multidimensional scaling (NMS) analysis of percent abundance invertebrate data indicated significant differences in community composition among some of the zones and stream classes identified a priori providing qualified support for this framework in reference site selection. NMS analysis of a range standardised condition and diversity metrics derived from the invertebrate data indicated a core set of 26 closely related sites, and four outliers that were considered atypical of reference site conditions and subsequently dropped from the network. Use of GIS linked to stream typology, available spatial databases and aerial photography greatly enhanced the objectivity and efficiency of reference site selection. The multi-metric ordination approach reduced variability among stream types and bias associated with non-random site selection, and provided an effective way to identify representative reference sites.     

建立基于CBERS数据的环境卫星遥感信息系统

介绍了应用于生态环境、环境质量监测、环境污染事故应急监控等环境保护领域的环境卫星遥感信息系统,提出应以国家、省、市三级行政区为单元,建立卫星影像动态数据库和查询系统,以满足生态环境观测信息处理需求.并以辽宁省为例,构建了省级CBERS环境卫星遥感信息系统.     

Effects of land cover changes induced by large physical disturbances on hydrological responses in Central Taiwan

This study analyzes the significant impacts of typhoons and earthquakes on land cover change and hydrological response. The occurrence of landslides following typhoons and earthquakes is a major indicator of natural disturbance. The hydrological response of the Chenyulan watershed to land use change was assessed from 1996 to 2005. Land use changes revealed by seven remote images corresponded to typhoons and a catastrophic earthquake in central Taiwan. Hydrological response is discussed as the change in quantities and statistical distributions of hydrological components. The land cover change results indicate that the proportion of landslide relative to total area increased to 6.1% after the Chi-Chi earthquake, representing the largest increase during the study period. The study watershed is dominated by forest land cover. Comparisons of hydrological components reveal that the disturbance significantly affects base flow and direct runoff. The hydrological modeling results demonstrate that the change in forest area correlates with the variation of base flow and direct runoff. Base flow and direct runoff are sensitive to land use in discussions of distinction. The proposed approach quantifies the effect of typhoons and earthquakes on land cover changes.     

Telemetric System for Hydrology and Water Quality Monitoring in Watersheds of Northern New Mexico, Usa

This study utilized telemetric systems to sample microbes and pathogens in forest, burned forest, rangeland, and urban watersheds to assess surface water quality in northern New Mexico. Four sites included remote mountainous watersheds, prairie rangelands, and a small urban area. The telemetric system was linked to dataloggers with automated event monitoring equipment to monitor discharge, turbidity, electrical conductivity, water temperature, and rainfall during base flow and storm events. Site data stored in dataloggers was uploaded to one of three types of telemetry: 1) radio in rangeland and urban settings; 2) a conventional phone/modem system with a modem positioned at the urban/forest interface; and 3) a satellite system used in a remote mountainous burned forest watershed. The major variables affecting selection of each system were site access, distance, technology, and cost. The systems were compared based on operation and cost. Utilization of telecommunications systems in this varied geographic area facilitated the gathering of hydrologic and water quality data on a timely basis.     

我国污染场地含水层监测现状与技术研发趋势

通过分析我国污染场地含水层监测现状和污染场地环境管理需求,指出我国污染场地含水层监测的不足之处并探讨了我国污染场地含水层监测技术研发趋势.当前,我国污染场地含水层监测主要以地下水监测为主,且监测仪器设备简陋陈旧、技术手段落后,不能满足数量日益增长的污染场地环境管理需求,急需发展一批新型、高效、经济、实用的监测技术和监测...     

Spatial contaminant heterogeneity: quantification with scale of measurement at contrasting sites

Material within the terrestrial environment is rarely homogeneously distributed, either spatially or temporally. One consequence of heterogeneity is that uncertainty is usually generated in measurements that are taken with the aim of characterising the environment. For example, a measurement of analyte concentration within soil taken from one sampling location on contaminated land can vary substantially when compared against another sample taken at effectively the same nominal location. The measurement uncertainty arising from the heterogeneity can substantially limit the reliability of the interpretations made upon environmental investigations. The sampling uncertainty usually outweighs the analytical uncertainty from the laboratory, often by a factor of 20 or more. One approach to reducing the uncertainty is to design a more suitable sampling strategy. This might be achieved by predicting the degree of heterogeneity prior to the investigation, but this is often difficult to achieve accurately. Another approach, which was investigated here, is to actually characterise the heterogeneity prior to the main investigation using rapid and inexpensive technology, such as in situ measurement techniques. In situ portable X-ray fluorescence (PXRF) and X-ray microprobe (XMP) techniques were employed to test the feasibility of this approach. Two contrasting contaminated land sites were chosen to characterise the two-dimensional spatial heterogeneity of heavy metal contamination in topsoil at a range of scales (50 m to 0.001 m). The spatial heterogeneity of contaminants, expressed as relative standard deviations, was found to differ between the two sites by a factor of two, largely due to the mode of deposition of pollution. The study also indicated that the heterogeneity did not change systematically with the scale of measurement between sampling locations at either site.     

Groundwater monitoring plans at small-scale sites--an innovative spatial and temporal methodology

An innovative methodology for improving existing groundwater monitoring plans at small-scale sites is presented. The methodology consists of three stand-alone methods: a spatial redundancy reduction method, a well-siting method for adding new sampling locations, and a sampling frequency determination method. The spatial redundancy reduction method eliminates redundant wells through an optimization process that minimizes the errors in plume delineation and the average plume concentration estimation. The well-siting method locates possible new sampling points for an inadequately delineated plume via regression analysis of plume centerline concentrations and estimation of plume dispersivity values. The sampling frequency determination method recommends the future frequency of sampling for each sampling location based on the direction, magnitude, and uncertainty of the concentration trend derived from representative historical concentration data. Although the methodology is designed for small-scale sites, it can be easily adopted for large-scale site applications. The proposed methodology is applied to a small petroleum hydrocarbon-contaminated site with a network of 12 monitoring wells to demonstrate its effectiveness and validity.     

Agricultural practices in grasslands detected by spatial remote sensing

The major decrease in grassland surfaces associated with changes in their management that has been observed in many regions of the earth during the last half century has major impacts on environmental and socio-economic systems. This study focuses on the identification of grassland management practices in an intensive agricultural watershed located in Brittany, France, by analyzing the intra-annual dynamics of the surface condition of vegetation using remotely sensed and field data. We studied the relationship between one vegetation index (NDVI) and two biophysical variables (LAI and fCOVER) derived from a series of three SPOT images on one hand and measurements collected during field campaigns achieved on 120 grasslands on the other. The results show that the LAI appears as the best predictor for monitoring grassland mowing and grazing. Indeed, because of its ability to characterize vegetation status, LAI estimated from remote sensing data is a relevant variable to identify these practices. LAI values derived from the SPOT images were then classified based on the K-Nearest Neighbor (KNN) supervised algorithm. The results points out that the distribution of grassland management practices such as grazing and mowing can be mapped very accurately (Kappa index?=?0.82) at a field scale over large agricultural areas using a series of satellite images.     

Canopy Spectra and Remote Sensing of Ashe Juniper and Associated Vegetation

A study was conducted in central Texas to determine the potential of using remote sensing technology to distinguish Ashe juniper (Juniperus ashei Buchholz) infestations on rangelands. Plant canopy reflectance measurements showed that Ashe juniper had lower near-infrared reflectance than other associated woody plant species and lower visible reflectance than mixed herbaceous species in spring and summer. Ashe juniper could be distinguished on color-infrared aerial photographs acquired in March, April, June, and August and on QuickBird false color satellite imagery obtained in June, where it had a distinct dark reddish-brown tonal response. Unsupervised classification techniques were used to classify aerial photographic and satellite imagery of study sites. An accuracy assessment performed on a computer classified map of a photographic image showed that Ashe juniper had producer's and user's accuracies of 100% and 92.9%, respectively, whereas an accuracy assessment performed on a classified map of a satellite image of the same site showed that Ashe juniper had producer's and user's accuracies of 94.1% and 88.1%, respectively. Accuracy assessments performed on classified maps of satellite images of two additional study sites showed that Ashe juniper had producer's and user's accuracies that ranged from 87.1% to 96.4%. These results indicate that both color-infrared photography and false color satellite imagery can be used successfully for distinguishing Ashe juniper infestations.     

Land cover change of watersheds in Southern Guam from 1973 to 2001

Land cover change can be caused by human-induced activities and natural forces. Land cover change in watershed level has been a main concern for a long time in the world since watersheds play an important role in our life and environment. This paper is focused on how to apply Landsat Multi-Spectral Scanner (MSS) satellite image of 1973 and Landsat Thematic Mapper (TM) satellite image of 2001 to determine the land cover changes of coastal watersheds from 1973 to 2001. GIS and remote sensing are integrated to derive land cover information from Landsat satellite images of 1973 and 2001. The land cover classification is based on supervised classification method in remote sensing software ERDAS IMAGINE. Historical GIS data is used to replace the areas covered by clouds or shadows in the image of 1973 to improve classification accuracy. Then, temporal land cover is utilized to determine land cover change of coastal watersheds in southern Guam. The overall classification accuracies for Landsat MSS image of 1973 and Landsat TM image of 2001 are 82.74% and 90.42%, respectively. The overall classification of Landsat MSS image is particularly satisfactory considering its coarse spatial resolution and relatively bad data quality because of lots of clouds and shadows in the image. Watershed land cover change in southern Guam is affected greatly by anthropogenic activities. However, natural forces also affect land cover in space and time. Land cover information and change in watersheds can be applied for watershed management and planning, and environmental modeling and assessment. Based on spatio-temporal land cover information, the interaction behavior between human and environment may be evaluated. The findings in this research will be useful to similar research in other tropical islands.     

Design of sampling locations for river water quality monitoring considering seasonal variation of point and diffuse pollution loads

The design of a water quality monitoring network (WQMN) is a complicated decision-making process because each sampling involves high installation, operational, and maintenance costs. Therefore, data with the highest information content should be collected. The effect of seasonal variation in point and diffuse pollution loadings on river water quality may have a significant impact on the optimal selection of sampling locations, but this possible effect has never been addressed in the evaluation and design of monitoring networks. The present study proposes a systematic approach for siting an optimal number and location of river water quality sampling stations based on seasonal or monsoonal variations in both point and diffuse pollution loadings. The proposed approach conceptualizes water quality monitoring as a two-stage process; the first stage of which is to consider all potential water quality sampling sites, selected based on the existing guidelines or frameworks, and the locations of both point and diffuse pollution sources. The monitoring at all sampling sites thus identified should be continued for an adequate period of time to account for the effect of the monsoon season. In the second stage, the monitoring network is then designed separately for monsoon and non-monsoon periods by optimizing the number and locations of sampling sites, using a modified Sanders approach. The impacts of human interventions on the design of the sampling net are quantified geospatially by estimating diffuse pollution loads and verified with land use map. To demonstrate the proposed methodology, the Kali River basin in the western Uttar Pradesh state of India was selected as a study area. The final design suggests consequential pre- and post-monsoonal changes in the location and priority of water quality monitoring stations based on the seasonal variation of point and diffuse pollution loadings.     

Uncertainty based optimal monitoring network design for a chlorinated hydrocarbon contaminated site

An application of a newly developed optimal monitoring network for the delineation of contaminants in groundwater is demonstrated in this study. Designing a monitoring network in an optimal manner helps to delineate the contaminant plume with a minimum number of monitoring wells at optimal locations at a contaminated site. The basic principle used in this study is that the wells are installed where the measurement uncertainties are minimum at the potential monitoring locations. The development of the optimal monitoring network is based on the utilization of contaminant concentration data from an existing initial arbitrary monitoring network. The concentrations at the locations that were not sampled in the study area are estimated using geostatistical tools. The uncertainty in estimating the contaminant concentrations at such locations is used as design criteria for the optimal monitoring network. The uncertainty in the study area was quantified by using the concentration estimation variances at all the potential monitoring locations. The objective function for the monitoring network design minimizes the spatial concentration estimation variances at all potential monitoring well locations where a monitoring well is not to be installed as per the design criteria. In the proposed methodology, the optimal monitoring network is designed for the current management period and the contaminant concentration data estimated at the potential observation locations are then used as the input to the network design model. The optimal monitoring network is designed for the consideration of two different cases by assuming different initial arbitrary existing data. Three different scenarios depending on the limit of the maximum number of monitoring wells that can be allowed at any period are considered for each case. In order to estimate the efficiency of the developed optimal monitoring networks, mass estimation errors are compared for all the three different scenarios of the two different cases. The developed methodology is useful in coming up with an optimal number of monitoring wells within the budgetary limitations. The methodology also addresses the issue of redundancy, as it refines the existing monitoring network without losing much information of the network. The concept of uncertainty-based network design model is useful in various stages of a potentially contaminated site management such as delineation of contaminant plume and long-term monitoring of the remediation process.     

遥感技术在大气环境监测中的应用综述

综合论述了近20多年来国内外对大气环境遥感监测的研究现状,介绍了应用于大气环境遥感监测的多种方法并着重阐述了被动式空基遥感和主动式地基遥感在大气环境遥感中的应用以及探测气溶胶的卫星传感器的发展历程和特点。最后,对我国大气环境遥感研究中存在问题和发展前景进行了讨论。     

江苏省工地和裸地扬尘遥感监测方法研究与结果分析

应用卫星遥感影像结合无人机现场核查数据,对2020年江苏省各设区市主城区工地和裸地2类扬尘源的时空分布变化和污染、管控情况开展了连续性监测,为生态环境监测部门业务化应用提供了思路和方法.研究结果显示,遥感解译精度优于95％,扬尘源数量、面积均呈上升趋势,至第4季度总数达1760个、总面积162.53 km2,总体管控情...     

The Contribution of Acadia PRIMENet Research to Science and Resource Management in the National Park Service

Acadia National Park was one of the 14 sites included in the Park Research and Intensive Monitoring of Ecosystems network (PRIMENet). For eight years the EPA monitored ultraviolet (UV) radiation at this site, with the National Park Service (NPS) sponsoring a total climate and air monitoring station. Under the auspices of PRIMENet, research projects were initiated that investigated the effects of UV on amphibians, determined watershed mass balances, and developed a model of deposition along an elevational gradient. The monitoring data and research results have been used by park management to protect vegetation and water resources from ozone and deposition. These data are now being used to develop a “vital signs” monitoring program under the NPS’ Inventory and Monitoring Program. These data sets have been used in regional, national and international programs to protect human health and resources from air pollution. Public outreach has been accomplished through web site resources and via the Schoodic Education and Research Center.     

Methodology for Identifying Optimal Locations of Water Quality Sensors in River Systems

A method to optimally site river water quality sensors is expanded and applied to a case study river to explore the application of mathematical siting methods to the design of river sampling networks. Fecal coliform contamination due to flooded swine waste lagoons was modeled as it moves downstream, and optimal sensor locations are located by minimizing the objective function of the optimization problem. The results of the simulations are analyzed by varying the number of allowed sampling locations and the simulated contamination event. For the case study application, the model suggests three sampling locations along the modeled river section. These three suggested sensing points did not greatly vary in location for different river flows and contamination events, indicating the robustness of the model results for this specific case study. Generally, the application of mathematical contaminant modeling is a useful and systematic approach to aid the design of river water quality monitoring networks.