Cadmium contamination in Tianjin agricultural soils and sediments: relative importance of atmospheric deposition from coal combustion

Cadmium (Cd) in coal, fly ash, slag, atmospheric deposition, soils and sediments collected from Tianjin, northern China, were measured to provide baseline information and determine possible Cd sources and potential risk. The concentrations of Cd in coal, fly ash and atmospheric deposition were much higher than the soil background values. Fallout from coal-fired thermal power plants, heating boilers and industrial furnaces has increased the Cd concentration in soils and sediments in Tianjin. The concentrations of Cd in soils of suburban areas were significantly higher than in rural areas, suggesting that coal burning in Tianjin may have an important impact on the local physical environment. Cd from coal combustion is readily mobilized in soils. It is soluble and can form aqueous complexes and permeate river sediments. The high proportion of mobile Cd affects the migration of Cd in soils and sediments, which may pose an environmental threat in Tianjin due to the exposure to Cd and Cd compounds via the food chain. This study may provide a window for understanding and tracing sources of Cd in the local environment and the risk associated with Cd bioaccessibility.     

Leaching of arsenic from coal fly ashes 2. Arsenic pre‐leaching with sodium gluconate solution

The present study deals with the development of an efficient and reliable process for safe disposal of coal fly ash to remove arsenic that has been found to be the most easily leachable and hazardous heavy metal in coal fly ash. Pre‐leaching of fly ash prior to disposal by a natural chelating agent, sodium gluconate (SG), was proposed and studied. Several operational factors influencing arsenic leachability, such as concentration of SG solution, liquid to solid ratio, pH, length of leaching time and leaching temperature were examined. Arsenic was found to leach out substantially with SG, but almost no further release was observed from the ash pre‐leached by SG. After the pre‐leaching treatment, the desirable high buffering capacity of the ash was well sustained. SG solution was effectively regenerated by activated alumina adsorption so that it could be successfully reused for multiple leaching/adsorption cycles.     

Trace elemental characterization of fly ash

The purpose of this study was to determine heavy metal concentrations in ash samples taken from the filter of the gas cleaning system of biomass incinerators in Austria. Knowing the concentrations of heavy metals is important for the decision of further treatment or utilization of the ashes. The heavy metals contained in the ashes remain in the bottom ash of the incinerator or leave the incinerator with the off-gas and are collected in the off-gas filter. The amount of the metals in the collected fly ash depends on the composition of the input material. The aim of this study was to examine this influence and compare the results with literature data. For measurement, the fly ash samples were at first dissolved in a microwave digestion unit using nitric acid and hydrochloric acid. Afterwards, 20 metals were analyzed by inductively coupled plasma optical emission spectrometry. Al, Fe, Mg, Mn, and Zn were found in higher concentrations in the fly ash samples. The enrichment factor between the concentrations in the fly ash and the concentrations in the input material was on average in the range of 18.     

燃煤灰渣中微量元素分布规律的研究

研究了锅炉飞灰和底灰中１５种微量元素的含量和分布，探讨了煤炭燃烧后，微量元素在灰渣中的集散及其影响因素，飞灰和底灰中大多数元素高于全国土壤背景值，７种元素高于克拉克值，其余８种低于克拉克值，飞灰中多数元素的地球化学富集因子高于１，呈富集状态，而底灰中多数元素富集因子小于１，飞灰和底灰中微量元素含量与煤中微量元素含量呈线性关系，微量元素含量不仅与煤有关，还受锅炉燃烧方式等人为因素影响。     

Utilization of fly ash in adsorption of heavy metals from wastewater

The aim of this study was to assess the toxicity reduction of wastewaster after treatment with fly ash. Fly ash is a waste material which is formed as a result of coal burning in power plants, but has the potential to adsorb heavy metal ions. The present study examined the adsorption capacity of fly ash to adsorb Pb²⁺, Cu²⁺, and Zn²⁺ from waste water under different conditions of contact time, pH, and temperature. Uptake of metal ions by fly ash generally rose with increasing pH. At lower temperatures the uptake of heavy metal adsorption were enhanced. Significant reduction in Pb²⁺ (79%), Cu²⁺ (53%), and Zn²⁺ (80%) content was found after treatment with fly ash of waste water treatment. Using the microtox test toxicity of the effluent was reduced by 75% due to removal of Pb²⁺ ion by the fly ash. Data indicated that fly ash generated by power plants may be used beneficially to remove metals from waste water.     

Study on polychlorinated dibenzo‐p‐dioxins and dibenzofurans in rivers and estuaries in Osaka Bay in Japan

In order to search the source of polychlorinated dibenzo‐p‐dioxins (PCDDs) and dibenzofurans (PCDFs) in blue mussel in Osaka bay, sediments from Osaka bay and from rivers running near an urban municipal incinerator were analysed for PCDDs, PCDFs and PCBs. The river and estuary sediments were all found to be contaminated with PCDDs at average levels of 9.8 and 12ppb on the dry basis, PCDFs of 7.8 and 5.1 ppb, and PCBs of 1600 and 1300ppb, respectively. The two sediments contained similar profiles of specific isomers and congeners of PCDDs and PCDFs with each other. In addition, there was observed positive close correlations between PCDD and PCDF levels in the two specimens as well as fly ash from urban municipal incinerators. These allow the conclusion that the main source of the two chemicals in Osaka bay is fly ash from waste incineration.     

The use of fly ash as conditioner for dewatering of biological sludges in drying beds

In this paper the conditioning of the secondary sludge by adding fly ash from thermal power plant of Ptolemaida (Greece) for dewatering in drying beds is examined.

The results of the experimental procedure that has been followed in a pilot unit are very encouraging and show that the addition of the fly ash in concentration of 6 % of the weight of the total suspended solids of the sludge in the entrance of the drying bed increases the filterability at the level of 95.4 % and the retention of the solids at the level of 110.5 %. Consequently the method employed allows the decrease of the area of the drying bed at the level of 100 % approximately.     

Use of fly ash agglomerates for removal of arsenic

The aim of this work is to investigate the application of fly ash adsorbent for removal of arsenite ions from dilute solution (100–1,000 ppm). Experiments were carried out using material from the “Turów” (Poland) brown-coal-burning power plant, which was wetted, then mixed and tumbled in a granulator to form spherical agglomerates. Measurements of arsenic adsorption from aqueous solution were carried out at room temperature and natural pH of fly ash agglomerates, in either a shaken flask or circulating column, to compare two different methods of contacting solution with adsorbent. Adsorption isotherms of arsenic were determined for agglomerated material using the Freundlich equation. Kinetic studies indicated that sorption follows a pseudo-second-order model. Preferable method to carry out the process is continuous circulation of arsenite solution through a column.     

Assessment of contamination by percolation of septic tank effluent through natural and amended soils

Fly ash has been found to be a potential material for the treatment of municipal and industrial wastewater, and may be useful in the treatment of septic tank effluent. Laboratory columns (30 cm) were used to determine the sorption capacity and hydraulic properties of lagoon fly ash, loamy sand, sand, and sand amended by lagoon fly ash (30 and 60%) and red mud gypsum (20%). The removal of chemical oxygen demand (COD) was high in all column effluents (71-93%). Extent of nitrification was high in Spearwood sand, Merribrook loamy sand and 20% red mud gypsum amended Spearwood sand. However, actual removal of nitrogen (N) was high in columns containing lagoon fly ash. Unamended Spearwood sand possessed only minimal capacity for P sorption. Merribrook loamy sand and red mud gypsum amended sand affected complete P removal throughout the study period of 12 weeks. Significant P leakage occurred from lagoon fly ash amended sand columns following 6-10 weeks of operation. Neither lagoon fly ash nor red mud gypsum caused any studied heavy metal contamination including manganese (Mn), lead (Pb), zinc (Zn), cadmium (Cd) and chromium (Cr) of effluent. It can be concluded that Merribrook loamy sand is better natural soil than Spearwood sand as a filter medium. The addition of lagoon fly ash enhanced the removal of P in Spearwood sand but the efficiency was lower than with red mud gypsum amendment.     

电厂煤飞灰单个颗粒的化学表征

用扫描电镜Ｘ射线能谱对电厂煤飞灰单个颗粒进行了形貌，粒度和化学组成的观察与分析，用Ｘ射线衍射鉴定了煤飞灰粗细颗粒中元素存在的化学形态（化合物或物相）结果表明，煤飞灰中有较多球形颗粒，还有一些不规则形颗粒，主要含有Ｓｉ，Ａｌ，Ｃａ，Ｆｅ，Ｓ，Ｋ等，不同形貌，大小颗粒中的组分含量差别较大，但大多以硅铝酸盐为基体，其它元素分布在颗粒表层（约１μｍ）中，粗细颗粒中均有石英和氧化铁，但粗粒中还富含Ｃａ和Ｆｅ     

Assessment of Contamination By Percolation Of Septic Tank Effluent Through Natural and Amended Soils

Fly ash has been found to be a potential material for the treatment of municipal and industrial wastewater, and may be useful in the treatment of septic tank effluent. Laboratory columns (30 cm) were used to determine the sorption capacity and hydraulic properties of lagoon fly ash, loamy sand, sand, and sand amended by lagoon fly ash (30 and 60%) and red mud gypsum (20%). The removal of chemical oxygen demand (COD) was high in all column effluents (71–93%). Extent of nitrification was high in Spearwood sand, Merribrook loamy sand and 20% red mud gypsum amended Spearwood sand. However, actual removal of nitrogen (N) was high in columns containing lagoon fly ash. Unamended Spearwood sand possessed only minimal capacity for P sorption. Merribrook loamy sand and red mud gypsum amended sand affected complete P removal throughout the study period of 12 weeks. Significant P leakage occurred from lagoon fly ash amended sand columns following 6–10 weeks of operation. Neither lagoon fly ash nor red mud gypsum caused any studied heavy metal contamination including manganese (Mn), lead (Pb), zinc (Zn), cadmium (Cd) and chromium (Cr) of effluent. It can be concluded that Merribrook loamy sand is better natural soil than Spearwood sand as a filter medium. The addition of lagoon fly ash enhanced the removal of P in Spearwood sand but the efficiency was lower than with red mud gypsum amendment.     

The fly ash influenced the heavy metal status of the soil and the seeds of sunflower. A case study

In this study, four cultivars of sunflower (Helianthus annuus) were grown in the sandy loam soil, supplemented with graded (v/v) quantity (0, 20, 40, 60, 80, 100%) of the fly ash, released by the combustion of the coal from the thermal power plant. The presence of fly ash in the soil increased its porosity, water holding capacity, pH, E.C., C.E.C., the content of sulphate, carbonate, bicarbonate, chloride, phosphorus, potassium, calcium and various trace elements. However, in the seeds, except Fe, Pb, Mn and Zn, and other heavy metals remained untraced up to 40% of the fly ash, above that their quantity slightly increased but the values are very much under the permissible limits.     

Heavy metals in albanian coastal sediments

Heavy metals (Fe, Mn, Cr, Ni, Cu, Cd, Pb, Sn) concentration has been determined on 39 coastal sediment samples collected in Albania. The relationship between the heavy metals content and the grain size has been considered. All metals, except Cu and Cd, resulted accumulated in the finest fraction, which constituted up to 95% of most of the considered sediments. A good correlation has been found for Ni, Cr, Fe, Zn, Cu in the entire area, indicating a common origin for these metals in the analyzed sediments. Concentration values fall in the range reported for Dinaric chain derived sediments, revealing, generally, a natural origin of the metal contents. Though in some selected areas such as the Drin and the Skumbin Bay, an antropogenic input of Cr, Fe, Ni and Cu can be observed, as the result of discharging of mines and smelter activities.     

Stabilised Coal Ash Studies in Italy

The ENEL Ash Research Centre - (Brindisi, Italy) - has started a research programme on the use of coal ash derived from its thermoelectric power plants as a component of blocks for artificial habitats. After preliminary laboratory tests, systematic physical, chemical, and biological tests were carried out in an experimental installation constructed in the area of the Torrevaldaliga power plant (80 km NW of Rome).

Two reef models - each made by assembling pyramids of 225 20 × 20 × 20 cm blocks - were submerged in two tanks (10 × 2 × 1.5 m) with running sea water (water flow: 3-5 cm s-1). the ash blocks were composed of fly ash (52.1%), bottom ash (26.1%), hydrated lime (5.2%) and water 16.6%, while concrete blocks were made of pozzolanic cement, sand and gravel. After two years, ash based blocks showed no weathering, volume variation or swelling; marked compressive strength and sonic velocity increases have, on the contrary, been recorded. No significant leaching of chemical elements of environmental concern was found. the biotic settlement on the ash blocks proved greater in quantity and better in quality than that on the concrete blocks; on ash blocks 62 species were found, compared to 54 on concrete. Ash-based materials seem to be more suitable for the settlement of the macrobenthos.     

Review of fly ash inertisation treatments and recycling

Fly ash (FA) is a by-product of power, and incineration plants operated either on coal and biomass, or on municipal solid waste. FA can be divided into coal fly ash, obtained from power plant burning coal, flue gas desulphurisation FA, that is, the by-product generated by the air pollution control equipment in coal-fired power plants to reduce the release of SO₂, biomass FA produced in the plants for thermal conversion of biomass and municipal solid waste incineration (MSWI) FA, that is, the finest residue obtained from the scrubber system in a MSWI plant. Because of the large amount produced in the world, fly ash is now considered the world’s fifth largest material resource. The composition of FA is very variable, depending on its origins; then, also pollutants can be very different. In this frame, it is fundamental to exploit the chemical or physical potentials of FA constituents, thus rendering them second-life functionality. This review paper is addressed to FA typology, composition, treatment, recycling, functional reuse and metal and organic pollutants abatement. Because of the general growing of environmental awareness and increasing energy and material demand, it is expected that increasing recycling rates will reduce the pressure on demand for primary raw materials, help to reuse valuable materials which would otherwise be wasted and reduce energy consumption and greenhouse gas emissions from extraction and processing.     

珠江三角洲地区水体表层沉积物中多环芳烃的来源、迁移及生态风险评价

检测了珠江三角洲河流及南海近海表层沉积物中25种多环芳烃的含量．其含量范围为138-6793ng·g-1．主成分分析/多元回归分析结果表明,珠江三角洲水体沉积物中多环芳烃来源主要有石油排放,煤、木柴等低温燃烧排放,机动车尾气排放及生物成因．其相对贡献分别为石油排放占36％、煤、木柴燃烧占27％、机动车尾气占25％,自然来源占12％．珠江、东江河流沉积物中多环芳烃主要来源于区域内工业和生活废物的直接排入和机动车尾气的近距离沉降．西江沉积物中多环芳烃大气沉降是主要输入途径．南海沉积物中多环芳烃河流输入是主要途径．在多环芳烃由河流向海洋的输送过程中,茈可以作为一个有效指标示踪河流输送的多环芳烃．风险评价表明,东江及珠江部分河段沉积物可能存在着对生物的潜在危害,其它区域多环芳烃的生态风险处于较低水平．     

Integrated approach of assessing sedimentary characteristics of onshore sand deposits on the Velankanni coast, Tamil Nadu, India: sheds light on extreme wave event signatures

The refraction of the 2004 Indian Ocean tsunami waves caused drastic devastation along East coast of India, mainly in the area of investigation. Here, we appraise and integrate the sedimentary characteristics and microfossil studies of the area. The gigantic tsunami waves caused the landward fining of sediments that were carried as suspended load. Tsunami sediments have distinctive characteristics, like fine-to-medium grained sand, moderately to poorly sorted sediments which indicating sudden winnowing followed by tranquil flood. Positively skewed grain size distribution indicating unidirectional transport, and mesokurtic to platykurtic character implying poorly sorted single source origin. The species of benthonic foraminifers and ostracods reside in marine environment indicating shallow water origin of sediments. The onshore deposits are vertically divided into three depositional units interpreted from Ground Penetrating Radar (GPR) signatures—Unit 1 is a relatively continuous parallel layer indicative of calm environment; Unit 2 has paleochannels and burial scarps, seen as oblique reflections that might be indicative of an intense erosional environment; Unit 3 is interpreted as 2004 tsunami layer, has three subunits. Each main units have been separated by Heavy Mineral Concentrated (HMC) layers, deposited by continuous wave action (~?20 cm) and by the tsunami (>?30 cm) activity, evidenced by low magnetic susceptibility values at the bottom compared to the top of the HMC layers. GPR has been effectively utilized in this paper as subsurface imaging tool for the interpretation and reconstruction of stratigraphy, and also helped to unearth the erosional and depositional environments.     

Retention characteristics of Cu2+, Pb2+, and Zn2+ from aqueous solutions by two types of low lime fly ashes

The technical feasibility of utilization of fly ash as a low-cost adsorbent for the removal of metals from water has been studied. For two types of fly ashes, the retention capacities of copper, lead, and zinc metal ions have been studied. Contact time, initial concentration, and pH have been varied and their effect on retention mechanism has been studied. The dominant mechanisms responsible for retention are found to be precipitation due to the presence of calcium hydroxide, and adsorption due to the presence of silica and alumina oxide surfaces in the fly ash. First-order kinetic plots have revealed that the rate constant increases with increase in the initial concentration and pH. Langmuir adsorption isotherms have been plotted to study the maximum adsorption capacities for metal ions considered under different conditions. X-ray diffraction studies revealed the formation of new peaks corresponding to respective metal ions precipitates under alkaline conditions.     

Environmental geochemistry studies in the area of Idrija mercury mine, Slovenia

Five centuries of mining and processing of mercury ore in the Idrija area have resulted in widespread contamination of different environmental compartments. Environmental impacts on a regional and local scale, caused by atmospheric emissions from the Idrija ore roasting plant, were established in the investigations of mercury spatial distribution in soil and attic dust in 160 km(2) area. Very high values were determined in the Idrijca River valley, and they decrease exponentially with the distance from Idrija. Mercury concentrations in attic dust are higher than in surrounding soils and the attic dust/soil ratio changes with distance. Measurements of mercury in the air confirmed widespread dispersion of mercury and showed highly elevated mercury concentrations around roasting plant and mine ventilation shaft. Beside, systematic monitoring of mercury contents in the stream sediments has demonstrated that huge amounts of mercury are stored in areas where ancient overbank sediments were deposited, and there was no decrease in mercury concentration in active sediments during the last 15 years. Recently, interesting and extremely polluted locations of historical small-scale roasting sites in the Idrija surroundings were discovered. Ongoing geochemical study aims to determine the extreme pollution and significance of these sites for wider contamination of soils and aquatic systems. Presented studies have shown that Hg mining in Idrija caused intense pollution of local and regional environment including the aquatic systems in the Gulf of Trieste, which is seen as the final sink of a major part of the Hg stored in soils and river sediments in the Idrija area.