大气颗粒物源解析技术研究进展

大气颗粒物源解析技术在环境管理中发挥着越来越重要的作用。本文从受体模型、样品的处理技术，源解析技术发展的最新趋势三方面介绍了大气颗粒物源解析技术的研究进展。     

杭州市主城区大气颗粒物的酸缓冲能力及来源解析

通过酸缓冲能力的测定实验,研究杭州市主城区大气颗粒物的酸缓冲能力,并利用二重源解析技术,解析了大气颗粒物中碱性组分的来源.结果表明,杭州市主城区大气颗粒物呈弱碱性,对降水酸度有一定的缓冲作用,但作用较小.总体而言,TSP与PM10的酸缓冲能力与其浓度呈负相关,但相关关系不明显,TSP的酸缓冲能力比PM10强.Ca是影响大气颗粒物酸缓冲能力的关键化学组分.TSP的酸缓冲能力主要来自建筑水泥尘.     

灰霾天气与大气颗粒物的相关性研究综述

随着城市化进程的迅速发展,城市大气污染加剧,灰霾天气也随之增多。综述了灰霾天气期间大气颗粒物在时空分布和污染水平2方面的污染特征,分析了大气颗粒物与能见度相关性,介绍了国内外对灰霾天气期间大气污染物的组成及源解析方面的研究进展,并提出了今后灰霾天气的研究方向。     

"二重源解析"技术及其系统实现

化学质量平衡是被广泛用于空气质量管理的受体模型之一.由于混合源(城市扬尘)和单一源因颗粒物源谱的严重共线性,采用美国环境保护署推荐使用的EPA-CMB8.2,无法定量解析出各排放源初始态和扬尘态颗粒物的贡献值和分担率.针对这一问题,完善和规范了"二重源解析"技术原理,开发了具有"二重源解析"功能的NKCMB3.0.对鞍山市样品污染物来源解析的试验结果表明,"二重源解析"技术在对混合源和单一源同时进行源解析时是有效的.     

含碳气溶胶采样偏差评估方法研究进展

含碳气溶胶采样偏差是影响含碳气溶胶及大气颗粒物精确测定的主要因素之一,进而影响大气颗粒物的源解析、环境效应分析、污染防治对策制定等。分析了含碳气溶胶采样偏差的产生原因,综述了目前研究所用的衡量采样偏差的方法,并分析了方法的优缺点,探讨了引起采样偏差的主要影响因素,最后对今后的相关研究方向进行了展望。     

杭州市灰霾天气基本特征及成因分析

根据浙江省近50年的灰霾天气统计数据,总结了浙江省灰霾天气特征。以杭州市为例,从杭州市地形地貌、气候因素和污染物排放因素3方面分析了杭州市灰霾天气成因,介绍了杭州市大气颗粒物污染特征及源解析。结果表明,杭州市灰霾天气频率显著升高,污染物排放是导致灰霾天气发生频率升高的直接原因,杭州市大气颗粒物中以细微颗粒物为主,大气污染类型已从煤烟型污染转变成复合型污染。结合杭州市大气污染现状,初步提出了灰霾天气防控对策。     

同位素示踪法在大气颗粒物重金属污染溯源中的应用进展

近年来,大气颗粒物污染问题备受关注。大气中重金属等污染物与颗粒物结合在一起,随其进行迁移,危害生态系统和人类健康。对大气颗粒物重金属来源进行解析是治理的必要前提。概述了大气颗粒物重金属来源分析方法,重点综述了当前同位素示踪法在大气颗粒物重金属溯源中的应用现状,并对该领域的研究前景进行了展望。     

南京市大气气溶胶中颗粒物和正构烷烃特征及来源分析

于2002年夏季（7月）和冬季（12月）采集南京市5个功能区的大气气溶胶（PM2．5和PM10）样品，对两个季节不同功能区颗粒物及其颗粒物中正构烷烃的分布特征和污染来源进行了分析。结果表明，南京市大气颗粒物含量冬季高于夏季，细颗粒高于粗颗粒。正构烷烃的变化规律同颗粒物一致，且主要分布在细颗粒物上。根据各个功能区正构烷烃（C15-C32）的CPI（CPI1、CPI2和CPI3）结果，可知南京市大气气溶胶中正构烷烃由生物源和人为源共同排放产生。％waxCn的结果表明生物源对气溶胶中正构烷烃的贡献率为20％～43％，对南京市大气颗粒物的贡献率为1．66％～4．76％。     

宁波市大气可吸入颗粒物PM1o和PM2.5的源解析研究

在宁波市布设4个代表性点位,于2010年春季、夏季和冬季进行大气PM10和PM2.s的采样,同时采集了多种颗粒物源样品,建立了PM10、PM2.5和源样品的化学成分谱.采用化学质量平衡模型(CMB)对宁波市PM10、PM2.5进行源解析.结果表明,城市扬尘、煤烟尘、机动车尾气尘是宁波市PM10、PM2.5的3大污染源,...     

浙东沿海城市大气颗粒物污染特征及来源解析研究

对2009年夏季浙东沿海地区环境空气质量进行监测,监测大气颗粒物(TSP、PM10、PM2.5、PM1.0)浓度,分析颗粒物污染特征、水溶性离子及无机元素组成,运用化学质量平衡受体模型(CMB模型)对浙东沿海地区大气TSP来源进行解析.结果表明,浙东沿海地区的大气颗粒物主要以细颗粒物为主,颗粒物中主要的水溶性离子为SO2-4、NH+4、Ca2+,土壤尘是该地区大气TSP的主要来源,北仑、乐清和奉化TSP中土壤尘的分担率分别达到55.49%、42.52%、40.70%,各监测点TSP来源具有一定的地域特征.     

Compilation and assessment of recent positive matrix factorization and UNMIX receptor model studies on fine particulate matter source apportionment for the eastern United States

In 1997, the U.S. Environmental Protection Agency (EPA) revised its particulate matter standards to include an annual standard for fine particulate matter (PM2.5; 15 microg/m3) and a 24-hr standard (65 microg/m3). The 24-hr standard was lowered to 35 microg/m3 in 2006 in an effort to further reduce overall ambient PM2.5 concentrations. Identifying and quantifying sources of particulate matter affecting a particular location through source apportionment methods is now an important component of the information available to decision makers when evaluating the new standards. This literature compilation summarizes a subset of the source apportionment research and general findings on fine particulate matter in the eastern half of the United States using Positive Matrix Factorization. The results between studies are generally comparable when comparable datasets are used; however, methodologies vary considerably. Commonly identified source categories include: secondary sulfate/coal burning (sometimes over 50% of total mass), secondary organic carbon/mobile sources, crustal sources, biomass burning, nitrate, various industrial processes, and sea salt. The source apportionment tools and methodologies have passed the proof-of-concept stage and are now being used to understand the ambient composition of particulate matter for sites across the United States and the spatial relationship of sources to the receptor. Recommendations are made for further and standardized method development for source apportionment studies, and specific research areas of interest for the eastern United States are proposed.     

Source apportionment of visual impairment during the California regional PM10/PM2.5 air quality study

Gases and particulate matter predictions from the UCD/CIT air quality model were used in a visibility model to predict source contributions to visual impairment in the San Joaquin Valley (SJV), the southern portion of California's Central Valley, during December 2000 and January 2001. Within the SJV, daytime (0800–1700 PST) light extinction was dominated by scattering associated with airborne particles. Measured daytime particle scattering coefficients were compared to predicted values at approximately 40 locations across the SJV after correction for the increased temperature and decreased relative humidity produced by “smart heaters” placed upstream of nephelometers. Mean fractional bias and mean fractional error were ?0.22 and 0.65, respectively, indicating reasonable agreement between model predictions and measurements. Particulate water, nitrate, organic matter, and ammonium were the major particulate species contributing to light scattering in the SJV. Daytime light extinction in the SJV averaged between December 25, 2000 and January 7, 2001 was mainly associated with animal ammonia sources (28%), diesel engines (18%), catalyst gasoline engines (9%), other anthropogenic sources (9%), and wood smoke (7%) with initial and boundary conditions accounting for 13%. The source apportionment results from this study apply to wintertime conditions when airborne particulate matter concentrations are typically at their annual maximum. Further study would be required to quantify source contributions to light extinction in other seasons.     

Influence of organic and inorganic markers in the source apportionment of airborne PM10 in Zaragoza (Spain) by two receptor models

Improving knowledge on the apportionment of airborne particulate matter will be useful to handle and fulfill the legislation regarding this pollutant. The main aim of this work was to assess the influence of markers in the source apportionment of airborne PM10, in particular, whether the use of particle polycyclic aromatic hydrocarbon (PAH) and ions provided similar results to the ones obtained using not only the mentioned markers but also gas phase PAH and trace elements. In order to reach this aim, two receptor models: UNMIX and positive matrix factorization were applied to two sets of data in Zaragoza city from airborne PM10, a previously reported campaign (2003–2004) (Callén et al. Chemosphere 76:1120-1129, 2009), where PAH associated to the gas and particle phases, ions and trace elements were used as markers and a long sampling campaign (2001–2009), where only PAH in the particle phase and ions were analyzed. For both campaigns, positive matrix factorization was able to explain a higher number of sources than the UNMIX model. Independently of the sampling campaign and the receptor model used, soil resuspension was the main PM10 source, especially in the warm period (21st March–21st September), where most of the PM10 exceedances were produced. Despite some of the markers of anthropogenic sources were different for both campaigns, common sources associated to different combustion sources (coal, light-oil, heavier-oil, biomass, and traffic) were found and PAH in particle phase and ions seemed to be good markers for the airborne PM10 apportionment.     

Source apportionment of airborne fine particulate matter in an underground mine

The chemical mass balance source apportionment technique was applied to an underground gold mine to assess the contribution of diesel exhaust, rock dust, oil mists, and cigarette smoke to airborne fine (<2.5 microm) particulate matter (PM). Apportionments were conducted in two locations in the mine, one near the mining operations and one near the exit of the mine where the ventilated mine air was exhausted. Results showed that diesel exhaust contributed 78-98% of the fine particulate mass and greater than 90% of the fine particle carbon, with rock dust making up the remainder. Oil mists and cigarette smoke contributions were below detection limits for this study. The diesel exhaust fraction of the total fine PM was higher than the recently implemented mine air quality standards based on total carbon at both sample locations in the mine.     

Source apportionment of particulate matter in a large city of southeastern Po Valley (Bologna, Italy)

This study reports the results of an experimental research project carried out in Bologna, a midsize town in central Po valley, with the aim at characterizing local aerosol chemistry and tracking the main source emissions of airborne particulate matter. Chemical speciation based upon ions, trace elements, and carbonaceous matter is discussed on the basis of seasonal variation and enrichment factors. For the first time, source apportionment was achieved at this location using two widely used receptor models (principal component analysis/multi-linear regression analysis (PCA/MLRA) and positive matrix factorization (PMF)). Four main aerosol sources were identified by PCA/MLRA and interpreted as: resuspended particulate and a pseudo-marine factor (winter street management), both related to the coarse fraction, plus mixed combustions and secondary aerosol largely associated to traffic and long-lived species typical of the fine fraction. The PMF model resolved six main aerosol sources, interpreted as: mineral dust, road dust, traffic, secondary aerosol, biomass burning and again a pseudo-marine factor. Source apportionment results from both models are in good agreement providing a 30 and a 33 % by weight respectively for PCA-MLRA and PMF for the coarse fraction and 70 % (PCA-MLRA) and 67 % (PMF) for the fine fraction. The episodic influence of Saharan dust transport on PM₁₀ exceedances in Bologna was identified and discussed in term of meteorological framework, composition, and quantitative contribution.     

Occurrence of Eleven Metals in Airborne Participates and in Surficial Materials

The amounts of eleven metals in urban airborne particulate matter samples collected in the United States from 1965 to 1974 (urban and nonurban) are described in two frames of reference: 1) concentration per unit volume of air; and 2) relative abundance in the collected particulate matter compared with surficial materials (subsurface soils) of the continental U. S. If it may be assumed that airborne particulates of solely natural origin would contain these metals in proportions similar to those in uncontaminated subsurface soils, then instances of metals whose proportions in actual particulate samples exceed soil sample proportions may reasonably be ascribed to the influence of human activity. Lead and, tentatively, cadmium exhibit general and significant enrichment in airborne particulate matter above their natural abundances in U. S. soils. Vanadium exhibits enrichment primarily in the northeastern U. S. The enrichment of copper has been traced to contamination from the sampler's own motor. Beryllium, chromium, cobalt, iron, manganese, nickel, and titanium appear to occur in airborne particulates in proportions comparable with those to be expected in natural aeolian dusts.     

杭州市空气颗粒物污染特征及变化规律研究

根据2006—2010年杭州市空气颗粒物的监测数据及2002、2006、2008年空气颗粒物来源解析结果,对杭州市空气颗粒物浓度、化学组分与污染来源等特征的变化规律进行分析,以期为空气颗粒物污染控制提供决策依据。结果表明,近年来杭州市PM10浓度有所下降,但一类功能区PM10仍超出《环境空气质量标准》(GB 3095—1996)的要求(≤0.04mg/m3),杭州市空气颗粒物污染以细颗粒物为主,空气颗粒物的二次转化、机动车尾气尘等产生的二次粒子污染相对严重;煤烟尘对杭州市PM10的贡献率下降明显,城市扬尘、二次粒子和机动车尾气尘对PM10的贡献率有所增加,是杭州市PM10的主要来源。     

Sensitivity of source apportionment of urban particulate matter to uncertainty in motor vehicle emissions profiles

A sensitivity analysis was conducted to characterize sources of uncertainty in results of a molecular marker source apportionment model of ambient particulate matter using mobile source emissions profiles obtained as part of the Gasoline/Diesel PM Split Study. A chemical mass balance (CMB) model was used to determine source contributions to samples of fine particulate matter (PM2.5) collected over 3 weeks at two sites in the Los Angeles area in July 2001. The ambient samples were composited for organic compound analysis by the day of the week to investigate weekly trends in source contributions. The sensitivity analysis specifically examined the impact of the uncertainty in mobile source emissions profiles on the CMB model results. The key parameter impacting model sensitivity was the source profile for gasoline smoker vehicles. High-emitting gasoline smoker vehicles with visible plumes were seen to be a significant source of PM in the area, but use of different measured profiles for smoker vehicles in the model gave very different results for apportionment of gasoline, diesel, and smoker vehicle tailpipe emissions. In addition, the contributions of gasoline and diesel emissions to total ambient PM varied as a function of the site and the day of the week.     

Comparison of real-time instruments used to monitor airborne particulate matter

Measurements collected using five real-time continuous airborne particle monitors were compared to measurements made using reference filter-based samplers at Bakersfield, CA, between December 2, 1998, and January 31, 1999. The purpose of this analysis was to evaluate the suitability of each instrument for use in a real-time continuous monitoring network designed to measure the mass of airborne particles with an aerodynamic diam less than 2.5 microns (PM2.5) under wintertime conditions in the southern San Joaquin Valley. Measurements of airborne particulate mass made with a beta attenuation monitor (BAM), an integrating nephelometer, and a continuous aerosol mass monitor (CAMM) were found to correlate well with reference measurements made with a filter-based sampler. A Dusttrak aerosol sampler overestimated airborne particle concentrations by a factor of approximately 3 throughout the study. Measurements of airborne particulate matter made with a tapered element oscillating microbalance (TEOM) were found to be lower than the reference filter-based measurements by an amount approximately equal to the concentration of NH4NO3 observed to be present in the airborne particles. The performance of the Dusttrak sampler and the integrating nephelometer was affected by the size distribution of airborne particulate matter. The performance of the BAM, the integrating nephelometer, the CAMM, the Dusttrak sampler, and the TEOM was not strongly affected by temperature, relative humidity, wind speed, or wind direction within the range of conditions encountered in the current study. Based on instrument performance, the BAM, the integrating nephelometer, and the CAMM appear to be suitable candidates for deployment in a real-time continuous PM2.5 monitoring network in central California for the range of winter conditions and aerosol composition encountered during the study.     

Sequential determination and chemical speciation analysis of inorganic As and Sb in airborne particulate matter collected in outdoor and indoor environments using slurry sampling and detection by HG AAS

Environmental Science and Pollution Research - In this work, fast sequential determination and chemical speciation analysis of inorganic arsenic and antimony in airborne particulate matter...