Assessing the health risk of reuse of bottom ash in road paving

Although the reuse of bottom ash has been favored gradually, reflected on regulations and researches, the associated risk is still an issue of great concern. This study quantified the health risks from multimedia transport and multi-pathway exposure to the concerned chemicals as a result of reusing bottom ash in road paving with consideration of various application scenarios. In particular, the using duration of the pavement was taken into consideration because movement of chemicals in the soils and groundwater would affect the subsequent exposure and risk. By using soil and groundwater transport modeling linked to food chain exposure assessment and incorporating the Monte Carlo method, the study identified Cr as the crucial toxicant and ingestion of drinking water and vegetables as the key exposure pathways. Furthermore, control of the using duration of road pavement is an essential factor of management and regulations to minimize the leaching of the hazardous constituents into the groundwater and subsequent contamination of food chain.     

A comparison of statistical methods for deriving freshwater quality criteria for the protection of aquatic organisms

Species sensitivity distributions (SSDs) are increasingly used in both ecological risk assessment and derivation of water quality criteria. However, there has been debate about the choice of an appropriate approach for derivation of water quality criteria based on SSDs because the various methods can generate different values. The objective of this study was to compare the differences among various methods. Data sets of acute toxicities of 12 substances to aquatic organisms, representing a range of classes with different modes of action, were studied. Nine typical statistical approaches, including parametric and nonparametric methods, were used to construct SSDs for 12 chemicals. Water quality criteria, expressed as hazardous concentration for 5 % of species (HC₅), were derived by use of several approaches. All approaches produced comparable results, and the data generated by the different approaches were significantly correlated. Variability among estimates of HC₅ of all inclusive species decreased with increasing sample size, and variability was similar among the statistical methods applied. Of the statistical methods selected, the bootstrap method represented the best-fitting model for all chemicals, while log-triangle and Weibull were the best models among the parametric methods evaluated. The bootstrap method was the primary choice to derive water quality criteria when data points are sufficient (more than 20). If the available data are few, all other methods should be constructed, and that which best describes the distribution of the data was selected.     

Chemical leasing in the context of sustainable chemistry

Chemical leasing is a new and innovative approach of selling chemicals. It aims at reducing the risks emanating from hazardous substances and ensuring long-term economic success within a global system of producing and using chemicals. This paper explores how, through chemical leasing, the consumption of chemicals, energy, resources and the generation of related wastes can be reduced. It also analyses the substitution of hazardous chemicals as a tool to protect environmental, health and safety and hence ensure compliance with sustainability criteria. For this, we are proposing an evaluation methodology that seeks to provide an answer to the following research questions: (1) Does the application of chemical leasing promote sustainability in comparison to an existing chemicals production and management system? 2. If various chemical leasing project types are envisaged, which is the most promising in terms of sustainability? The proposed methodology includes a number of basic goals and sub-goals to assess the sustainability for eight different chemical leasing case studies that have been implemented both at the local and the national levels. The assessment is limited to the relative assessment of specific case studies and allows the comparisons of different projects in terms of their relative contribution to sustainable chemistry. The findings of our assessment demonstrate that chemical leasing can be regarded as promoting sustainable chemistry in five case studies with certainty. However, on the grounds of our assessment, we cannot conclude with certainty that chemical leasing has equivalent contribution to sustainable chemistry in respect of three further case studies.     

Principles and perspectives

BACKGROUND, AIM AND SCOPE: With respect to the enormous increase of chemical production in the last decades and the tens of thousands of individual chemicals on the market, the permanent improvement of chemical management is a permanent target to achieve the goals of sustainable consumption and production set by the WSSD in Johannesburg 2002. MAIN FEATURES: Several approaches exist to describe sustainability of chemistry. However, commonly agreed criteria are still missing. There is no doubt that products of modern chemistry help to achieve important goals of sustainability and that significant improvements have occurred regarding direct releases from production sites, but several facts demonstrate that chemistry is far from being sustainable. Still too many chemicals exhibit hazardous characteristics and pose a risk to health and environment. Too many resources are needed to produce chemicals and finished products. RESULTS AND CONCLUSION: Therefore, a strategy for sustainability of chemistry should be developed which comprises the following main elements: 1. Sustainable chemicals: sustainable chemical management includes a regulatory framework which makes no difference between new and existing chemicals, contains efficient information flow through the supply chain which allows users to handle chemicals safely and offers an authorisation procedure and/or an efficient restriction procedure for substances of high concern. This regulatory scheme should promote the development of inherently safe chemicals. 2. Sustainable chemical production: Sustainable chemical production needs the development and implementation of emerging alternative techniques like selective catalysis, biotechnology in order to release less CO2 and less toxic by-products, to save energy and to achieve higher yields. Information exchange on best available techniques (BAT) and best environmental practices (BEP) may help to promote changes towards more sustainability. 3. Sustainable products: An integrated product policy which provides a framework for sustainable products promotes the development of products with a long-term use phase, low resource demand in production and use, low emission of hazardous substances and properties suitable for reuse and recycling. This may be promoted by eco-labelling, chemical leasing concepts and extended information measures to enhance the demand of consumers and various actors in the supply chain for sustainable products. RECOMMENDATION AND PERSPECTIVE: Important tools for the promotion of sustainable chemistry are the abolition of barriers for innovation in legislation and within the chemical industry, more transparency for all users of chemical products, a new focus on sustainability in education and research, and a new way of thinking in terms of sustainability.     

Contaminants in waste foundry sand and its leachate

The environmental characteristics of Waste Foundry Sands (WFS), including chemicals in WFS and its leachate, are essential in understanding the environmental impact, rational disposal and potential development of beneficial applications of this solid industrial waste. This paper presents an assessment of broad-spectrum chemicals (metallic, non-metallic and organic chemicals) in aspects of their statistics (mean, median and the 95th percentile) in dry-weight WFS and WFS leachates based on laboratory measurements of 594 WFS samples from 123 foundry facilities in the USA. Results indicate that WFS is basically not hazardous except a risk associated with WFS from copper-based foundry facilities. Leachability of metallic chemicals varies among investigated WFS. A clear delineation between different leaching protocols is implicated.     

Decision-support software tools for integrated risk assessment of hazardous substances in complex terrain

This paper presents the ongoing research at the Swiss Federal Institute of Technology (ETH), Zurich, related to the design and implementation of an IDSS (integrated decision support system) dedicated to integrated risk assessment and safety management with application to the transportation of hazardous substances. One of the goals is to construct advanced models to estimate (a) the optimal routing for transportation of hazardous substances and (b) optimise plans for emergency preparedness and management in case of potential (severe) accidents. As an output of this activity one aims at designing tools to represent risk to the public by using a GIS calculation platform, generically applicable to Switzerland. Though a database of some 700 chemicals is available, epichlorohydrin is the hazardous substance targeted in the first phase.     

Six interaction profiles for simple mixtures

The Agency for Toxic Substances and Disease Registry (ATSDR) has a program for chemical mixtures that encompasses research on chemical mixtures toxicity, health risk assessment, and development of innovative computational methods. ATSDR prepared a guidance document that instructs users on how to conduct health risk assessment on chemical mixtures (Guidance Manual for the Assessment of Joint Toxic Action of Chemical Mixtures). ATSDR also developed six interaction profiles for chemical mixtures. Two profiles were developed for persistent environmental chemicals that are often found in contaminated fish and also can be detected in human breast milk. The mixture included chlorinated dibenzo-p-dioxins, hexachlorobenzene, dichlorodiphenyl dichloroethane, methyl mercury, and polychlorinated biphenyls. Two profiles each were developed for mixtures of metals and mixtures of volatile organic chemicals (VOCs) that are frequently found at hazardous waste sites. The two metal profiles dealt with (a) lead, manganese, zinc, and copper; and (b) arsenic, cadmium, chromium, and lead; the two VOCs mixtures dealt with (a) 1,1,1-trichloroethane, 1,1-dichloroethane, trichloroethylene, and tetrachloroethylene; and (b) benzene, ethylbenzene, toluene, and xylenes (BTEX). Weight-of-evidence methodology was used to assess the joint toxic action for most of the mixtures. Physiologically based pharmacokinetic modeling was used for BTEX. In most cases, a target-organ toxicity dose modification of the hazard index approach is recommended for conducting exposure-based assessments of noncancer health hazards.     

Public health assessment of hexachlorobenzene

Recently, hexachlorobenzene (HCB) was proposed for inclusion in the system of toxicity equivalency factors (TEFs) currently used for dioxin-like compounds. In this paper, we explore the practical implications of the proposition to the Agency for Toxic Substances and Disease Registry (ATSDR) programs by comparing respective health guidance values for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and HCB (expressed as total toxicity equivalents [TEQs]), reviewing possible interactions between HCB and dioxin-like chemicals, and by providing information on actual co-existence of HCB and dioxin-like chemicals at hazardous waste sites. We found a good correlation between the TEF-adjusted oral exposure guidance values for HCB and guidance values for TCDD. The combination of HCB and other dioxin-like compounds was not found in soil, air, or water media at hazardous waste sites. Based on this fact, it is not necessary to include HCB in the total TEQ count at hazardous waste sites at this time.     

Identification of chemical hazards for terrestrial plants in the regulatory context: Comparison of OECD and ISO guidelines

Standardized test protocols are used in the regulatory context for identifying the hazardous properties of chemicals, wastes, and contaminated materials. This paper compares the relevance of two guidelines measuring effects on terrestrial plants, the OECD TG 208 and the ISO TG 22030 and presents the scientific basis for a recent decision of the European Chemicals Agency (ECHA) under the European chemicals regulation REACH. If there are no specific phytotoxicity alerts, both guidelines are considered suitable for assessing long-term hazards, providing that a sufficient number of species is included in the OECD protocol, the recommended minimum number is six, which offer a reasonably broad selection of species to account for interspecies sensitivity. The proposed methodology, based on a combination of probabilistic assessments using Monte Carlo analysis, can be adapted for supporting similar decisions under specific regulatory processes; for example, for assessing contaminated soils or pesticides’ applications.     

Present State,of Industrial Waste Management in Japan

Systematic management for industrial waste in Japan has been carried out based on the Waste Disposal and Public Cleansing Law which was enacted in 1970. The law and its ordinances designate 19 kinds of waste materials discharged from business activities as industrial waste and prescribe the generator's responsibility, requirements for treatment contractors, standards for consignment, specific personnel, etc. from the view of proper management. And they also, prescribe disposal standards, structure, and maintenance standards for treatment facilities, including final disposal sites, from the view of proper treatment and disposal. The Standard for Verification provides criteria to categorize as hazardous or nonhazardous industrial waste which is subjected to treatment and disposal in conformity with each standard. The fundamental policies to cope with industrial waste focus on reduction of generation, promotion of recycling, establishment of a comprehensive information management system and participation of the public which can contribute well to prevent environmental pollution caused by inappropriate management of industrial waste.     

Persistent organochlorine contaminants in hair samples of Northern Poland population, 1968-2009

The European regulation on chemicals, REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals), came into force on 1 June 2007. With pre-registration complete in 2008, data for these substances may provide an overview of the expected chemical space and its characteristics. In this paper, using various in silico computation tools, we evaluate 48 782 neutral organic compounds from the list to identify hazardous and safe compounds. Two different classification schemes (modified Verhaar and ECOSAR) identified between 17% and 25% of the compounds as expressing only baseline toxicity (narcosis). A smaller portion could be identified as reactive (19%) or specifically acting (2.7%), while the majority were non-assigned (61%). Overall environmental persistence, bioaccumulation and long-range transport potential were evaluated using structure-activity relationships and a multimedia fugacity-based model. A surprisingly high proportion of compounds (20%), mainly aromatic and halogenated, had a very high estimated persistence (>195 d). The proportion of compounds with a very high estimated bioconcentration or bioaccumulation factor (>5000) was substantially less (6.9%). Finally, a list was compiled of those compounds within the applicability domain of the models used, meeting both persistence and bioaccumulation criteria, and with a long-range transport potential comparable to PCB. This list of 68 potential persistent organic pollutants contained many well-known compounds (all halogenated), but notably also five fluorinated compounds that were not included in the EINECS inventory. This study demonstrates the usability of in silico tools for identification of potentially environmentally hazardous chemicals.     

Development and implementation of surface water quality standards for protection of human health in Korea

Current water quality standards for the protection of human health in Korea include 17 substances found in rivers and streams. Due to increasing concern over the release of hazardous chemicals into the aquatic environment, there has been a demand for additional water quality standards. Therefore, the Korean Ministry of the Environment plans to gradually increase the number of water quality standards to 30 substances, including 22 substances for protection of human health and 8 substances for protection of aquatic ecosystems by 2015. In this study, new water quality standards for protection of human health were established for 1,4-dioxane, formaldehyde, and hexachlorobenzene. We selected candidate hazardous chemicals, conducted a human health risk assessment to determine priority chemicals, established water quality standards based on technical analyses and comparison with domestic and developed countries’ water quality standards, and conducted an expert review. Water quality standards for protection of aquatic ecosystems will be derived in the near future. This study describes how the water quality standards for protection of human health were developed and implemented. Current status, recent expansion, and future plans for water quality standards in Korea are also covered.     

Use of Probabilistic Methods to Understand the Conservatism in California’s Approach to Assessing Health Risks Posed by Air Contaminants

Many state and federal agencies have prepared risk assessment guidelines, which describe methods for quantifying health risks associated with exposure to vapors and particulates emitted from point and area sources (e.g., California Air Pollution Control Officers Association [CAPCOA] under the Air Toxics “Hot Spots” Act [Assembly Bill 2588] and the U.S. Environmental Protection Agency [EPA] under the Clean Air Act). In general, these guidelines recommend or require the use of upper bound “point” estimates for numerous exposure parameters. This methodology yields a single risk estimate, which is intended not to underestimate the true risk and may significantly overstate it. This paper describes a risk assessment of a facility’s airborne emissions using a probabilistic approach, which presents a range and distribution of risk estimates rather than a single point estimate. The health risks to residents living near a food processing facility, as estimated using techniques recommended by California AB2588, are compared to the results of a probabilistic analysis. Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were identified as the emitted chemicals of concern. The point estimate method recommended by CAPCOA resulted in estimates that were greater than the 99.99th percentile risk predicted by the probabilistic analysis. As shown in other assessments of persistent airborne chemicals, secondary or indirect exposure pathways (i.e., ingestion of beef, ingestion of cow’s milk, and ingestion of mother’s milk) rather than inhalation, were the greatest contributors to risk. In this analysis, the probability distributions for the cancer potency factor and ingestion of cow’s milk had the largest impact on the results of the 33 exposure factors considered.     

Evaluation of soil ecotoxicity tests with functional endpoints for the risk assessment of plant protection products

This paper outlines the state-of-the-art in discussing tests with functional endpoints for the soil compartment for regulatory purposes. In spite of the fact that organic matter decomposition is one of the most important functions in the soil ecosystem, this process has not been the subject of a test requirement for risk assessment of plant protection products until very recently. Since EU Directive 91/414/EEC concerning the placing of plant protection products on the market requires in its Annex III, point 10.6.2 (entitled “Effects on other soil, non-target macro-organisms”), the evaluation of effects on organic matter breakdown, there is an urgent need to fulfil this requirement. The use of functional endpoints in terrestrial model ecosystems is also under discussion in the framework of the notification process for chemicals. Four potential methods (bait-lamina-test, litterbag test, minicontainer test, cotton-strip assay) taken from ecological literature are briefly reviewed and evaluated in this paper using several defined criteria regarding their usefulness for registration purposes. In this context, areas for further research are identified. The insecticide Dimilin (a.i. diflubenzuron) is used as an example to show how such a test improves risk assessment. Therefore, it is strongly recommended that a guidance paper describing the main principles of at least one test method on organic matter decomposition should be written in order to realise the EU requirement.     

Indicators for Chemicals: Sources,impacts and policy performance (5 pp)

Background Different types of indicators have been developed to describe the impact of chemicals on society and environment. Due to the high number of substances and their different types of use, most of these indicators are directed to specific areas of interest – regarding workplace safety, environmental health or consumer health. They address a specific subset of chemicals and can be used for monitoring enterprise-specific, national or international management measures. Main Features A survey of existing indicators for chemicals has shown that indicators already exist for a remarkable number of problem fields. As soon as the release and the environmental fate of chemicals are taken into account, the complexity of the approaches increases considerably. The distinction between indicators for drivers, pressures, state, impacts and responses, as proposed by the European Environmental Agency, supports the identification of proper indicators for a specific type of problem. Discussion and Conclusions. No single indicator exists which is able to cover the whole range of chemicals and their applications. Several indicator approaches cover at least a subset of the most relevant substances. If they are intended to be used for European monitoring, robust data must be provided by EU Member States. Chemicals in enterprises (ancillary inputs as well as process chemicals) are an important element of in-plant material flow management – in terms of occupational safety and health as well as environmental protection. Existing indicators for hazardous chemicals can be a valuable tool for process and product refinement regarding hazardous chemicals, especially for enterprises. Outlook Indicators for production and impact of chemicals, as well as policy performance indicators, are essential elements in order to monitor the management of chemicals. They have to be established for the national and for the EU level.     

Governance of Complex Socio-Environmental Risks: The Case of Hazardous Chemicals in the Baltic Sea

Complex socio-environmental risks challenge society. In response to scientific uncertainty and socio-political controversies, environmental governance, precaution, and the ecosystem approach to management are held forward as complements to governmental risk-based sector-restricted regulation. We analyze this development for hazardous substances in the Baltic Sea. Based on interviews and policy analysis, we study informal governance and, in particular, four central EU and international policies, and investigate how present governance relates to risks and objectives at hand. While showing emergence of broader governance approaches, we conclude that central objectives will not likely be met. Furthermore, we question the quest for broad environmental governance and emphasize the value of command and control regulation, if it implements precaution. These findings contribute to the theorizing on environmental (risk) governance. Finally, we provide some ideas that could help development and implementation of risk policies for hazardous chemicals in the Baltic Sea as well as other complex risks.     

Factors influencing appropriate management of household hazardous waste in Nakhon Nayok,Thailand: A multilevel analysis

Household hazardous products contain hazardous chemicals, so when discarding these products a household hazardous waste (HHW) stream is created. HHW is a major environmental problem in Thailand, yet HHW has received scant attention so management is often inadequate or inappropriate. The objective of this study was to investigate the factors associated with appropriate HHW management in Thailand. Data were collected using a structured questionnaire completed during randomly assigned household interviews in Nakhon Nayok province, Thailand, between February and May 2017. The proportion of “appropriate management” was presented as percentage with its 95% confidence interval (CI). A multilevel mixed-effects logistic regression model was performed to determine the factors associated with appropriate HHW management, with 663 households included. The proportion of appropriate HHW management was 23.4% (95%CI: 20.2% to 26.6%). Both individual and local government administrative organization factors had on an effect on appropriate HHW management, including (a) being female (adjusted odds ratio [OR]:1.59; 95%CI: 1.03 to 2.46); (b) household size (adjusted OR: 1.66; 95%CI: 1.09 to 2.54); (c) knowledge score vis-à-vis HHW management (adjusted OR: 1.78; 95%CI: 1.43 to 2.02); (d) appropriate HHW storage behavior (adjusted OR: 2.48; 95%CI: 1.60 to 3.83); and (e) appropriate HHW use behavior (adjusted OR: 3.97; 95%CI: 2.40 to 6.58). The government of Thailand might consider a program to increase appropriate management of household hazardous waste to mitigate public health and environmental contamination risks.

Implications: Household hazardous waste becomes a major concern in many countries, including Thailand. The household hazardous waste management should be started at the source first, because household hazardous waste is mixed with the municipal waste stream. Thus, this study finding will be important for policymakers such as government and local government and can be used to create a specific policy and campaigns for household hazardous waste management.     

Priority setting for industrial chemicals of health and environmental relevance

Decision-making for the reduction of health and far-reaching ecological hazards caused by environmental chemicals must be based on a scientifically founded risk assessment. An Advisory Committee on Existing Chemicals of Environmental Relevance found an approach for dealing with industrial chemicals which are already on the market. Selection was carried out on the basis of criteria applied first as an aggregate and then individually in combination.     

An object-oriented software for fate and exposure assessments

The model system CemoS¹ (Chemical Exposure Model System) was developed for the exposure prediction of hazardous chemicals released to the environment. Eight different models were implemented involving chemicals fate simulation in air, water, soil and plants after continuous or single emissions from point and diffuse sources. Scenario studies are supported by a substance and an environmental data base. All input data are checked on their plausibility. Substance and environmental process estimation functions facilitate generic model calculations. CemoS is implemented in a modular structure using object-oriented programming. e-mail: cemos@aphrodite.mathematik.uni-osnabrueck.de     

Framing Environmental Risks in the Baltic Sea: A News Media Analysis

Scientific complexity and uncertainty is a key challenge for environmental risk governance and to understand how risks are framed and communicated is of utmost importance. The Baltic Sea ecosystem is stressed and exposed to different risks like eutrophication, overfishing, and hazardous chemicals. Based on an analysis of the Swedish newspaper Dagens Nyheter, this study discusses media representations of these risks. The results show that the reporting on the Baltic Sea has been fairly stable since the beginning of the 1990s. Many articles acknowledge several risks, but eutrophication receives the most attention and is also considered the biggest threat. Authorities, experts, organizations, and politicians are the dominating actors, while citizens and industry representatives are more or less invisible. Eutrophication is not framed in terms of uncertainty concerning the risk and consequences, but rather in terms of main causes.