Industrial Tailings in Traunsee (Austria) Revisited: The Status of 1999

Alkaline tailings from a salt work and a soda plant have been pumped into the southernmost part of Traunsee at Ebensee for many decades. A survey in 1981 showed an accumulation of more than 3 × 10⁶ m³ alkaline mud in the Bay of Ebensee and the existence of slumping structures and turbidites in the profundal zone of the lake. A new survey of the industrial tailings has been performed in 1999. Compared to the earlier survey, the accumulation in the Bay of Ebensee has grown to >4 × 10⁶ m³, which suggests an average yearly input of 90 000 m³. Slumping structures and turbidites document the unstable situation of the tailings near the waste inlet. The lake area occasionally affected by the turbidity currents in the profundal zone has increased to 19%. Within the central profundal area these tailings reach <1 m in thickness.     

Epilithic Diatoms in an Alpine Lake (Traunsee,Austria) Affected by Soda and Salt Mining Industries

Traunsee, a 191 m deep Alpine lake in Austria, is affected by industrial tailings from the soda and salt mining industries since 1883. In 1998 littoral water chloride concentrations ranged between 40 and 85 mg L^-1 and the highest conductivity was 560 S cm^-1, which is almost double as high as the values reported from the two nearby reference lakes. Chloride concentrations increased towards the location of the industrial salt and soda emission into the lake. Analogously to the chloride gradient, the epilithic littoral diatom flora changes towards the waste inlet. Shifts in the species percentages towards the emission source, a high percentage of taxa with large conductivity tolerances, the presence of a small Achnanthes minutissima Kützing morphotype, and occurrences of taxa focused at habitats of higher electrolyte content, indicate subtle impacts on the epilithic diatom flora. An analysis of the seasonal succession of the epilithic diatoms at the waste inlet compared to a lake intern reference site, reveals that only during the late summer period in 1998 the diatom assemblage at the waste inlet became significantly different, indicating seasonally restricted effects of the industrial emissions.     

Translocation and Growth Experiments with the Macropohyte Potamogeton Lucens L. in Traunsee (Austria), with Respect to Industrial Tailings

The absence of Potamogeton lucens L. in an area of Traunsee, Austria, which is heavily impacted by industrial sludges was related to these deposits. The hypothesis that P. lucens L. is affected by the industrial tailings was confirmed by growth experiments of the translocated plants in the field. At the unpolluted reference site of the lake, the plants grew better, they were longer and produced more leaves than at the emission site.     

Variations in the Epiphytic Invertebrate Community Structure on Potamogeton Perfoliatus L. in Traunsee (Austria): Patchiness versus Impacts by Industrial Tailings

The epiphytic invertebrates found on Potamogetonperfoliatus L. in Traunsee, an oligotrophic Alpine lake inAustria, were investigated in August and October 1998 in orderto study the impact of industrial tailings discharged into thelake. 113 taxa were found, 54 could be identified to thespecies level. Their total abundance varied between ca.190,000 and 1,138,000 ind. m^-2 lake bottom area. Thisepiphytic assemblage was dominated by Dreissenapolymorpha and Sida crystallina, which resulted in avery low overall species diversity. Multivariate statisticalanalyses revealed significant differences in the communitystructure between three sites, each of them was located at adifferent distance from the site of industrial waste emission.These differences were interpreted as variations which reflectthe patchiness within highly structured habitats rather thanas being the result of the industrial pollution.     

14C-Photosynthesis of Phytoplankton in an Oligotrophic Alpine Lake (Traunsee,Austria) and its Response to Turbidity Caused by Industrial Tailings

The influence of industrial tailings on the biological integrity of the phytoplankton was assessed from annual measurements of photosynthetic rates in the alpine lake Traunsee. The mean annual integral production of 21 mmol C m^-2 d^-1 corresponded to the oligotrophic nature of the lake. Effects of effluents were tested by comparing photosynthesis at a station close to the industrial outlet (EB) and at a reference site with a maximum depth of 190 m (VI). Between-site optical properties (vertical attenuation coefficient, euphotic depth) were statistically significant different. The euphotic zone at the impacted station was on average 2 m shallower than at the reference site, owing to turbidity emanating from the industrial plant. The adaptation to low light intensities by the algal community at this station was evident from a high maximum light utilisation coefficient (^* at low light saturation (E _K). Algae at the deep reference site were photosynthetically less efficient but adapted to high light intensities. Photosynthetic adaptation to different light climates in the euphotic zone without significant quantitative biomass alterations at the impacted site gave a clear signature of biological integrity of the phytoplankton in the oligotrophic Traunsee.     

Assessment of the Ecological Integrity of Traunsee (Austria) Via Analysis of Sediments and Benthic Microbial Communities

Since nearly one hundred years Traunsee experiences the import of tons of liquid and solid waste originating from salt and soda production. Today, the lake exhibits chloride concentrations of up to 170 mg L^-1 and 19% of the lake floor are directly or indirectly influenced by industrial deposits (ID). Based on the comparison of several microbial parameters in unaffected, directly affected and intermediate lake bottom sediments, the ecological integrity of the lake was evaluated. The highly alkaline ID, which were exclusively colonized by microorganisms, harbored a bacterial community reduced by a factor of 10 in abundance and biomass compared to undisturbed sediment areas within the lake. The bacterial community of ID was furthermore characterized by a reduced content of actively respiring cells (INT-formazan reduction), a lower frequency of dividing cells (FDC) and a significantly reduced cell and biomass production. A 80 to 90% reduction in carbon recycling is estimated for the area exclusively covered by ID. Protists, although occasionally absent from the industrial sediments, were in general found to be less sensitive to the contaminant stress. Differences in alkalinity and dissolved organic carbon (DOC) concentrations of sediment porewaters as well as the total organic content and C/N ratios of sediments partly explain the microbial pattern observed at the various sampling sites. Possible consequences of the continuous industrial tailings for the whole lake ecosystem and the validation of the ecological integrity are discussed.     

Dynamics of Bacterial Abundance,Biomass, Activity,and Community Composition in the Oligotrophic Traunsee and the Traun River (Austria)

The holomictic Traunsee is the deepest and second largest lakein Austria. The special characteristic of this ecosystem isthe fact that local salt and soda industries presumably alterthe lake by the discharge of waste materials. Since thebeginning of the 20th century salt and soda works areannually releasing up to 50,000 tons of solid wastes and up to150,000 tons of chloride into Traunsee. To assess potentialeffects of these anthropogenic impacts on the bacterioplanktonthree sampling sites, influenced as well as not influenced bythe industrial discharge, were chosen for comparison andsampled monthly from November 1997 to October 1998. Bacterialabundance ranged between 0.4 to 3.0 × 10⁶ cells ml^-1 with decreasing numbers along the depth profile. Theproportion of actively respiring bacteria, i.e. INT [2-(4-iodophenyl)-3-(4-nitrophenyl)-5-phenyltetrazolium chloride]reducing cells, never exceeded 10% of DAPI (4',6'-diamidino-2-phenylindole) stained cells. Fluorescence in situ hybridization (FISH) was used to examine the seasonal and spatial distribution of dominant phylogenetic groups of thebacterioplankton. Up to 84% of bacteria detected with DAPIcould be detected via FISH applying the universal bacterialprobe EUB338. Percentages of alpha- and beta-Proteobacteriaand members of the Cytophaga-Flavobacterium cluster did notexceed 60% of DAPI-stained cells.Beta-Proteobacteriaappeared to be the most abundant group, not only in Traunsee butalso in two reference lakes, Attersee and Hallstättersee. No significant differences in any of the bacterial parameters couldbe detected between the three sampling sites and all measurementswere found in the range reported for oligotrophic lakes. The highdischarge of the Traun River, resulting in a lake water renewaltime of only one year, may diminish possible effects of industrial waste discharge in the pelagic zone.     

Revegetating industrial waste disposal sites

Short-rotation tree plantations were established at seven industrial waste disposal sites in southern Finland. Altogether 31,500 willow cuttings were planted between 1984 and 1989. Neutralized residue from a titanium dioxide pigment process had an unfavourable influence on growth. Biological sludges from a municipal sewage treatment plant, and pulp and paper mills were too compact to be used alone as substrate, but gave a good supply of nutrients. Sand, bark and de-inking waste were sufficiently porous, but were low in nutrients. A mixture of different waste materials is therefore recommended as a substrate for willow stands. Replacement of a natural soil cover with waste material allows disposal of a greater volume of refuse and diminishes the costs of revegetation. The landfill characteristics have to be taken into account. The high temperature of bark also disturbed the growth of willow stands. Ferrous sulphate in the landfill limits the possibility of irrigating the stand. The highest biomass production of the stands exceeded that of normal Finnish forest. Willow stands can be used for landscaping industrial waste disposal sites, for increasing evapotranspiration and minimizing leachate discharge.     

Fate of mutagenic chemicals in soil amended with petroleum and wood preserving sludges

A field study using monoliths (lysimeters) of a sandy clay loam soil was conducted to assess the fate of mutagenic chemicals after refinery and wood preserving bottom sediment sludges were land treated. The Ames Salmonella/microsome assay¹ was used to determine the direct (without metabolic activation, −S9) and indirect (with metabolic activation, + S9) mutagenicity of the wastes, unamended soil, waste amended soils, and leachate. Extracts having a mutagenic ratio (MR) (MR= No. colonies from sample extract/No. colonies from DMSO solvent control) of ⩾ 2 were considered positively mutagenic. Extracts of the wood preserving waste sludge without activation were non-mutagenic (MR < 2) but extracts with activation ( + S9) produced very strong indirect mutagenicity (MR = 7.9). After soil incorporation, the waste amended soil produced very strong direct (MR = 8.9) and indirect (MR = 11.9) mutagenicity by day 180 and remained mutagenic (MR = 5.7, −S9; MR = 3.95, + S9) through day 350. The amount of residue in leachate from the wood preserving waste amended lysimeters was significantly greater (P <0.05) than the unamended soil during the first 90 days after waste application, but was not different after 90 days. The leachate residue from wood preserving waste amended lysimeters in the 90–180-day period produced mutagenic responses both with (MR = 2.24 and 2.51) and without (MR = 2.29) activation. Polynuclear aromatic hydrocarbons were the main constituents identified in the leachate residues that produced a mutagenic response. Soil treatment of the refinery sludge reduced its weak indirect mutagenicity before soil incorporation (MR = 2) to non-mutagenic (MR = 1.4) immediately following soil treatment. The MR of the waste amended soil increased to 1.7 by day 180 but by day 350 decreased to a level equal to that observed at day 0 (MR = 1.4). Leachate from the refinery amended lysimeters had significantly greater (P < 0.05) amounts of organic residue than unamended lysimeters 180 to 350 days after waste application. The leachate from one refinery waste amended lysimeter (90–180 days after waste application) produced a mutagenic response (MR = 3.16). The refinery sludge was detoxified shortly after soil treatment, but the wood preserving sludge required > 350 days to detoxify in the soil environment. The possibility exists that mobile mutagenic chemicals may leach into underlying groundwater from the treatment zone of soils amended with refinery and wood preserving sludges.     

Protozooplankton in the Deep Oligotrophic Traunsee (Austria) Influenced by Discharges of Soda and Salt Industries

Traunsee is a deep oligotrophic lake in Austria characterised by an artificial enrichment of chloride in the hypolimnion (up to 170 mg L^-1) caused by waste disposal of soda and salt industries. Protists were collected monthly over one year, observed alive and after Quantitative Protargol Staining (ciliates) or via epifluorescence microscopy (heterotrophic flagellates). Three sites within the lake (0–40 m depths) were compared to deeper water layers from 60–160 m depths where chloride concentrations and conductivity were increased. In addition, we observed the protozooplankton of two neighbouring lakes, i.e. reference systems, during one sampling occasion. In Traunsee the abundance of ciliates was low (200–36 600 cells L^-1) in contrast to high species diversity (at least 60 different species; H_S = 2.6) throughout the year. The main pelagic species in terms of abundance were small oligotrichs and prostomatids like Rimostrombidium brachykinetum/hyalinum, Balanion planctonicum and Urotricha spp. throughout the investigation period. Among free-living heterotrophic flagellates, which occurred at densities of 40–2800 cells mL^-1, small morphotypes dominated in the pelagial. No differences at the community level between the three lakes could be observed and pelagic ciliates and flagellates seemed not to be affected by increased chloride concentrations or by enhanced conductivity.     

昆山高新区工业废水减排潜力分析

以第一次全国污染源普查江苏省昆山市数据为基础,分析了昆山高新区工业废水和污染物的产排特征及减排潜力。分析结果表明,通信设备、计算机及其他电子设备制造业、纺织业和金属制品业是昆山高新区主要工业废水排放行业,这3个行业的废水、COD和氨氮排放量之和分别占全区排放总量的84．9％、88．0％和85．6％。与全国行业平均水平相比,昆山高新区的通信设备、计算机及其他电子设备制造业还具有较大的污染物减排潜力。     

Circulating fluidized bed incineration of industrial solid wastes

A pilot scale test facility of a circulating fluidized bed incinerator was established to generate design and operation data and help assess the technical feasibility for industrial applications. The use of high turbulence in the combustion zone and feeding an acid-capturer directly into the incinerator to absorb acid gases eliminates the costly afterburner and scrubber. This paper presents some systematic incineration tests of uniform industrial wastes such as paper mill sludge cake, rubber waste and petroleum coke. Sludge cakes with high moisture and low heating values can be treated to a low emission level by co-firing with coal. The high superficial gas velocity has improved combustion efficiency but increases NO_x emissions. However, sulphur content has almost no influence on sulphur retention. The problems of CO/NO_x emissions and circulation stability are also discussed.     

Assessment of Ecological Integrity from Environmental Variables in an Impacted Oligotrophic,Alpine Lake: Whole Lake Approach Using 3d-Spatial Heterogeneity

The ecological integrity of a lake as a whole can only beassessed through an adequate sampling strategy. Spatialheterogeneity of phytoplankton as well as vertical andhorizontal variability of physical and chemical variables wereestimated from 57 stations at four seasons differing in theirhydrological regime. Resolution of grid positions, located byGPS, was 250 m near the impact site, 500 m for the southernpart of the lake, and 1000 m in the northern part. Data areanalysed by conventional gridding methods as well as in threedimensions with a novel GIS-technique. Horizontal large scaledifferences in several variables are associated withhydrological situations. Local variability in the southern baywas due to input of industrial tailings at times. Spatialvariation of phytoplankton biomass estimated as chlorophyll-aand relevant associated environmental variables were analysedusing a graphical multimetric approach. With this technique,the directly impacted area can be evaluated relative to theremaining part of the lake. The lake is then compared with tworeference lakes, one within the same catchement, the other ina different water-shed. An index of ecological integrity wasdeveloped describing multimetric intra- and interspecific lakevariability. The final index was used to describe the statusof lake water quality relative to a `undisturbed' referencelake. Results showed that Traunsee is ecologically intactalthough its chemistry differs substantially from an`external' reference.     

The use of life cycle assessment for the comparison of biowaste composting at home and full scale

Environmental impacts and gaseous emissions associated to home and industrial composting of the source-separated organic fraction of municipal solid waste have been evaluated using the environmental tool of life cycle assessment (LCA). Experimental data of both scenarios were experimentally collected. The functional unit used was one ton of organic waste. Ammonia, methane and nitrous oxide released from home composting (HC) were more than five times higher than those of industrial composting (IC) but the latter involved within 2 and 53 times more consumption or generation of transport, energy, water, infrastructures, waste and Volatile Organic Compounds (VOCs) emissions than HC. Therefore, results indicated that IC was more impacting than HC for four of the impact categories considered (abiotic depletion, ozone layer depletion, photochemical oxidation and cumulative energy demand) and less impacting for the other three (acidification, eutrophication and global warming). Production of composting bin and gaseous emissions are the main responsible for the HC impacts, whereas for IC the main contributions come from collection and transportation of organic waste, electricity consumption, dumped waste and VOCs emission. These results suggest that HC may be an interesting alternative or complement to IC in low density areas of population.     

Determination of Cu and Ni incorporation ratios in Portland cement clinker

Cu and Ni are metals found in galvanic sludges; these sludges are considered hazardous due to their heavy metal content. The main objective of this work is to determine the incorporation amount of Cu and Ni in Portland clinker when a galvanic sludge containing these metals is added to the clinker raw-material. The influence of this addition on the clinkering reactions is evaluated as well as the possibility of co-incinerating galvanic sludges containing Cu and Ni in rotary cement kilns. This study also characterizes the galvanic sludge. Samples were prepared by additions from 0.25 to 5 wt.% of a galvanic sludge to an industrial clinker raw-material. The clinkering process was simulated in a laboratory device. The following techniques were applied to characterize the raw materials and the products of the tests: chemical analysis, differential thermal analysis (DTA) and thermogravimetric analysis (TG). Leaching tests were performed in the produced clinker samples in order to verify the incorporation of the studied metals in the clinker structure. The results led to the conclusion that additions of up to 2 wt.% of a galvanic sludge containing 2.4 wt.%Cu and 1.2 wt.% Ni to clinker raw-material do not affect the clinkering reactions and that these metals are totally incorporated into the clinker.     

Ecological Integrity Assessment of Lakes Using Fish Communities: An Example from Traunsee Exposed to Intensive Fishing and to Effluents from the Soda Industry

In order to analyse potential influences of soda industryeffluents on the ecological integrity of Traunsee (TS) weinvestigated the fish community of the lake in comparison witha reference lake (Hallstättersee HS) and used a reconstructionfrom the (older) literature concerning the original speciescomposition of Traunsee. Published `Index of Biotic Integrity(IBI)' metrics were considered to be of limited value due tothe relatively low species number in the oligotrophic, Alpinelake. Therefore we included, in addition to speciescomposition, studies on egg distribution, larval fishdensities, life-history parameters (i.e. growth, maturity,fecundity, age and size composition), stress levels and heavymetal content of the dominant whitefish (Coregonuslavaretus), as well as overall fish density and biomass (usinghydroacoustics) to assess the ecological status of the fishcommunity. Two of the original 18 species have disappearedfrom the lake, presumably in connection with the introductionof non-native eel (Anguilla anguilla) and theconstruction of a power plant in the outflow. Silt from grindedlimestone together with highly alkaline pore waters is emittedvia industrial wastewater from Sodaworks and covers part of thelake bottom. We observed that eggs of whitefish were spawnedmainly in the main inflowing river and close to the shore, thusavoiding the silty areas and making the anticipated damage tothe reproductive potential of whitefish neglectable. This wascorroborated by larval surveys done weekly on both lakes fromJanuary to May, which showed halve the density of whitefishlarvae in TS compared to HS. Estimates of potentially spawningfish from hydroacoustic surveys resulted in a ratio of 1(TS) :3 (HS). Analysis of whitefish revealed that they are growingfaster in TS and have higher fecundity leading to somecompensation of lower abundance. High levels of fishing in TSmight have led to this pattern and to depressed yields asindicated by the age composition. Level of oxidative stress andheavy metal content were not discernible from the referencelake. Therefore we concluded that negative impacts on theecological status of the fish community resulted from fisheriesmismanagement and a power plant situated in the outflow of thelake, considered to have damaged spawning places for somespecies, but not from soda industry effluents.     

Optimization of co-digestion of various industrial sludges for biogas production and sludge treatment: Methane production potential experiments and modeling

Optimal biogas production and sludge treatment were studied by co-digestion experiments and modeling using five different wastewater sludges generated from paper, chemical, petrochemical, automobile, and food processing industries situated in Ulsan Industrial Complex, Ulsan, South Korea. The biomethane production potential test was conducted in simplex-centroid mixture design, fitted to regression equation, and some optimal co-digestion scenarios were given by combined desirability function based multi-objective optimization technique for both methane yield and the quantity of sludge digested. The co-digestion model incorporating main and interaction effects among sludges were utilized to predict the maximum possible methane yield. The optimization routine for methane production with different industrial sludges in batches were repeated with the left-over sludge of earlier cycle, till all sludges have been completely treated. Among the possible scenarios, a maximum methane yield of 1161.53 m³ is anticipated in three batches followed by 1130.33 m³ and 1045.65 m³ in five and two batches, respectively. This study shows a scientific approach to find a practical solution to utilize diverse industrial sludges in both treatment and biogas production perspectives.     

Characterization of char derived from various types of solid wastes from the standpoint of fuel recovery and pretreatment before landfilling

Carbonization is a kind of pyrolysis process to produce char from organic materials under an inert atmosphere. In this work, chars derived from various solid wastes were characterized from the standpoint of fuel recovery and pretreatment of waste before landfilling. Sixteen kinds of municipal and industrial solid wastes such as residential combustible wastes, non-combustible wastes, bulky wastes, construction and demolition wastes, auto shredder residue, and sludges were carbonized at 500 degrees C for 1h under nitrogen atmosphere. In order to evaluate the quality of char as fuel, proximate analysis and heating value were examined. The composition of raw waste had a significant influence on the quality of produced char. The higher the ratio of woody biomass in waste, the higher heating value of char produced. Moreover, an equation to estimate heating value of char was developed by using the weight fraction of fixed carbon and volatile matter in char. De-ashing and chlorine removal were performed to improve the quality of char. The pulverization and sieving method seems to be effective for separation of incombustibles such as metal rather than ash. Most char met a 0.5 wt% chlorine criterion for utilization as fuel in a shaft blast furnace after it was subjected to repeated water-washing. Carbonization could remove a considerable amount of organic matter from raw waste. In addition, the leaching of heavy metals such as chrome, cadmium, and lead appears to be significantly suppressed by carbonization regardless of the type of raw waste. From these results, carbonization could be considered as a pretreatment method for waste before landfilling, as well as for fuel recovery.     

Thermal behaviour of chrome shavings and of sludges recovered after digestion of tanned solid wastes with calcium hydroxide

The thermal behaviour of chrome shavings and of sludges recovered after digestion of tanned wastes with Ca(OH)2 was studied. Ashes obtained after incineration of wastes at various temperatures were analysed by X-ray diffraction and EDX method. The main crystallized phases present in the ash obtained at 600 degrees C are Cr2O3 and NaCl. The diffractograms revealed an increase in the intensities of the chromium oxide peaks and a very notable decrease of the amount of sodium chloride at 1100 degrees C. EDX analysis revealed a total disappearance of the chlorine peak at this temperature. Scanning electron micrographs show that the waste lost its fibrous aspect when the temperature increases. Formation of aggregates was noted after 550 degrees C. Combustion of organic matters and decarbonation phenomenon are the main stages observed on GTA and DTA curves of sludges. These phenomena are, respectively, exothermic and endothermic. The diffractogram of sludges recorded at 550 degrees C, in the presence of a constant oxygen surplus, revealed the presence of CaCrO4 and CaCO3.     

Use of boron waste as an additive in red bricks

In boron mining and processing operations, large amounts of clay containing tailings have to be discarded. Being rich in boron, the tailings do not only cause economical loss but also pose serious environmental problems. Large areas have to be allocated for waste disposal. In order to alleviate this problem, the possibility of using clayey tailings from a borax concentrator in red brick manufacturing was investigated. Up to 30% by weight tailings addition was found to improve the brick quality.