Assessment of physico-chemical qualities and heavy metal concentrations of Umgeni and Umdloti Rivers in Durban,South Africa

We assessed the effects of seasonal dynamics on the physico-chemical qualities and heavy metals concentrations of the Umgeni and Umdloti Rivers in Durban, South Africa. Water samples were taken from nine different sampling points and analysed for the following parameters; temperature, pH, turbidity, electrical conductivity (EC), biological oxygen demand (BOD₅), chemical oxygen demand (COD), phosphate (PO₄ ^2?), nitrate (NO₃ ^2?), ammonium (NH₄ ⁺), sulphate (SO₄ ^2?), lead (Pb²⁺), mercury (Hg²⁺), cadmium (Cd²⁺), aluminium (Al³⁺), and copper (Cu²⁺) using standard methods. The data showed variations it terms of the seasonal fluctuations and sampling regime as follows: temperature 12–26.5 °C; pH 5.96–8.45; turbidity 0.53–18.8 NTU; EC 15.8–5180 mS m^?1; BOD₅ 0.60–7.32 mg L^?1; COD 10.5–72.9 mg L^?1; PO₄ ^2??<?500–2,460 μg L^?1; NO₃ ^2? <0.05–4.21 mg L^?1; NH₄ ⁺?<?0.5–1.22 mg L^?1; SO₄ ^2? 3.90–2,762 mg L^?1; Pb²⁺ 0.023–0.135 mg L^?1; Hg²⁺ 0.0122–0.1231 mg L^?1 Cd²⁺ 0.068–0.416 mg L^?1; Al³⁺ 0.037–1.875 mg L^?1, and Cu²⁺0.006–0.144 mg L^?1. The concentrations of most of the investigated parameters exceeded the recommended limit of the South African Guidelines and World Health Organization tolerance limits for freshwater quality. We conclude that these water bodies are potentially hazardous to public health and this highlights the need for implementation of improved management strategies of these river catchments for continued sustainability.     

Groundwater quality assessment in the urban-west region of Zanzibar Island

This paper highlights the levels of anions (nitrate, nitrite, sulfate, bromide, chloride, and fluoride) and cations (potassium, sodium, magnesium, and calcium) in selected springs and groundwater sources in the urban-west region of Zanzibar Island. The levels of total dissolved solids (TDS) and sodium adsorption ratio (SAR) were also studied. Thirty water samples were collected in December 2012 from various types of water sources, which included closed hand-dug wells (CHDW), open hand-dug wells (OHDW), springwater (SW), public bore wells (PBW), and bore wells owned by private individuals (BWP), and analyzed after filtration and sometimes dilution. The cations were analyzed using inductively coupled plasma-optical emission spectrometry (ICP-OES). The anions were analyzed by chemically suppressed ion chromatography (IC). The ranges of the levels of the investigated parameters were as follows: Na 13.68–3,656 mg L^?1, K 2.66–583 mg L^?1, Mg 0.63–131.10 mg L^?1, Ca 16.79–189.9 mg L^?1, Cl^? 8.61–4,340.97 mg L^?1, F^? 0–1.02 mg L^?1, Br^? 0–10.88 mg L^?1, NO₃ ^? 0.18–342.4 mg L^?1, NO₂ ^? 0–1.39, SO₄ ^2? 4.43–534.02 mg L^?1, TDS 7–6,380 mg L^?1, and SAR 0.63–50. Except fluoride, most of the studied parameters in the water samples had concentrations beyond the permissible limits of the World Health Organization (WHO). The elevated concentrations are a result of seepage of contaminated water from on-site septic tanks, pit latrines, landfill leachates, fertilizer applications, and domestic effluents. These results should alert domestic water stakeholders in Zanzibar to the urgent task of initiating a quick mitigation response to control these alarming water risks.     

Assessment of the labile fractions of copper and zinc in marinas and port areas in Southern Brazil

The dissolved labile and labile particulate fractions (LPF) of Cu and Zn were analyzed during different seasons and salinity conditions in estuarine waters of marina, port, and shipyard areas in the southern region of the Patos Lagoon (RS, Brazil). The dissolved labile concentration was determined using the diffusive gradients in thin films technique (DGT). DGT devices were deployed in seven locations of the estuary for 72 h and the physicochemical parameters were also measured. The LPF of Cu and Zn was determined by daily filtering of water samples. Seasonal variation of DGT–Cu concentrations was only significant (p?<?0.05) at one shipyard area, while DGT–Zn was significant (p?<?0.05) in every locations. The LPF of Cu and Zn concentrations demonstrated seasonal and spatial variability in all locations, mainly at shipyard areas during high salinity conditions. In general, except the control location, the sampling locations showed mean variations of 0.11–0.45 μg?L^?1 for DGT–Cu, 0.89–9.96 μg?L^?1 for DGT–Zn, 0.65–3.69 μg?g^?1 for LPF–Cu, and 1.35–10.87 μg?g^?1 for LPF–Zn. Shipyard areas demonstrated the most expressive values of labile Cu and Zn in both fractions. Strong relationship between DGT–Zn and LPF–Zn was found suggesting that the DGT–Zn fraction originates from the suspended particulate matter. Water salinity and suspended particulate matter content indicated their importance for the control of the labile concentrations of Cu and Zn in the water column. These parameters must be taken into consideration for comparison among labile metals in estuaries.     

The high potential of Pelargonium roseum plant for phytoremediation of heavy metals

The major objective of this investigation was to evaluate the potential of scented geraniums, Pelargonium roseum, to uptake and accumulate heavy metals nickel (Ni), cadmium (Cd), or lead (Pb). For this, plants were grown in an artificial soil system and exposed to a range of metal concentrations over a 14-day treatment period. Then, metals from the entire biomass were extracted. The results showed that scented geranium plants accumulated in excess of 20,055 mg of Ni kg^?1 dry weight (DW) of root and 10,889 mg of Ni kg^?1 DW of shoot, and in excess of 86,566 mg of Pb kg^?1 DW for roots and 4,416 mg of Pb kg^?1 DW for shoots within 14 days. Also, the uptake and accumulation of cadmium in roots of scented geranium plants increased with the exposure at low (250, 500 mg?L^?1) and medium level (750 mg?L^?1) followed by a decline at the highest level (1,000 mg?L^?1). The highest accumulation in roots (31,267 mg?kg^?1 DW) was observed in 750 mg?L^?1 cadmium treatment. In the shoots of scented geraniums, the highest amount of metal accumulation (1,957 mg?kg^?1 DW) was detected at 750 and 1,000 mg?L^?1 of cadmium in the culture solution. Finally, since the high concentrations of Ni or Pb accumulated in shoots of scented geranium has far exceeded 0.1 % DW and for Cd has far exceeded 0.01 % DW, P. roseum is a new hyperaccumulator species for these metals and can be used in phytoremediation industry.     

Effect of citric acid on metals mobility in pruning wastes and biosolids compost and metals uptake in <Emphasis Type="Italic">Atriplex halimus</Emphasis> and <Emphasis Type="Italic">Rosmarinus officinalis</Emphasis>

To assess metal mobility in pruning waste and biosolids compost (pH?6.9 and total concentration of metals in milligram per kilogram of Cd 1.9, Cu 132, Fe 8,513, Mn 192, Pb 81, and Zn 313), shrubs species Atriplex halimus and Rosmarinus officinalis were transplanted in this substrate and irrigated with citric acid (4 g?L^?1, pH?2.9) and nutrient solution daily for 60 days. Citric acid significantly increased the concentrations of soluble Mn and Fe in the nutrient substrate solution measured by suction probes, while other metals did not vary in concentration (Cu and Zn) or were not observed at detectable levels (Cd and Pb). In plants, citric acid significantly increased the concentrations of Cu (2.7?±?0.1–3.3?±?0.1 mg?kg^?1), Fe (49.2?±?5.2–76.8?±?6.8 mg?kg^?1), and Mn (7.2?±?1.1–11.4?±?0.7 mg?kg^?1) in leaves of R. officinalis, whereas the concentration of only Mn (25.4?±?0.3–42.2?±?2.9 mg?kg^?1) was increased in A. halimus. Increasing Fe and Mn solubility by citric acid addition indicates the possibility of using it to improve plant nutrition. The mobility of metals in this substrate was influenced for the concentration of the metal, the degree of humification of organic matter and its high Fe content.     

Temporal variability in water quality parameters—a case study of drinking water reservoir in Florida, USA

Our objective was to evaluate changes in water quality parameters during 1983–2007 in a subtropical drinking water reservoir (area: 7 km²) located in Lake Manatee Watershed (area: 338 km²) in Florida, USA. Most water quality parameters (color, turbidity, Secchi depth, pH, EC, dissolved oxygen, total alkalinity, cations, anions, and lead) were below the Florida potable water standards. Concentrations of copper exceeded the potable water standard of <30 μg?l^?1 in about half of the samples. About 75 % of total N in lake was organic N (0.93 mg?l^?1) with the remainder (25 %) as inorganic N (NH₃-N: 0.19, NO₃-N: 0.17 mg?l^?1), while 86 % of total P was orthophosphate. Mean total N/P was <6:1 indicating N limitation in the lake. Mean monthly concentration of chlorophyll-a was much lower than the EPA water quality threshold of 20 μg?l^?1. Concentrations of total N showed significant increase from 1983 to 1994 and a decrease from 1997 to 2007. Total P showed significant increase during 1983–2007. Mean concentrations of total N (n?=?215; 1.24 mg?l^?1) were lower, and total P (n?=?286; 0.26 mg?l^?1) was much higher than the EPA numeric criteria of 1.27 mg total N l^?1 and 0.05 mg total P l^?1 for Florida’s colored lakes, respectively. Seasonal trends were observed for many water quality parameters where concentrations were typically elevated during wet months (June–September). Results suggest that reducing transport of organic N may be one potential option to protect water quality in this drinking water reservoir.     

Dual character of Sundarban estuary as a source and sink of CO2 during summer: an investigation of spatial dynamics

A comprehensive attempt has been made to evaluate the diurnal and spatial pattern of CO₂ exchange between the atmosphere and water along the estuarine track of Indian Sundarbans during the two summer months, April and May, 2011. Rigorous field observations were carried out which included the hourly measurements of total alkalinity, pH, fugacity of CO₂ in ambient air and water surface, dissolved oxygen, and chlorophyll a. The estuarine water was found rich in total alkalinity and was oversaturated with CO₂ throughout the diurnal cycle in the two stations situated at the inner and middle estuary, respectively, whereas an entirely reverse situation was observed in the outer fringes. The fugacity of CO₂ in water ranged from 152 to 657 μatm during the study period. The percentage of over-saturation in inner and middle estuary varied from 103 to 168 and 103 to 176 %, respectively, whereas the degree of under-saturation in the outer estuary lied between 40 and 99 %. Chlorophyll a concentrations were found higher in the outer estuary (12.3?±?2.2 mg?m^?3) compared to the middle (6.4?±?0.6 mg?m^?3) and inner parts (1.6?±?0.2 mg?m^?3), followed by a similar decreasing pattern in nutrient availability from the outer to inner estuary. The sampling stations situated at the inner and middle estuary acted as a net source of 29.69 and 23.62 mg?CO₂?m^?2 day^?1, respectively, whereas the outer station behaved as a net sink of ?33.37 mg?CO₂ m^?2 day^?1. The study of primary production and community respiration further supports the heterotrophic nature of the estuary in the inner region while the outer periphery was marked by dominant autotrophic character. These contrasting results are in parity with the source characters of many inner estuaries and sinking characters of the outer estuaries situated at the distal continental shelf areas.     

Health risk assessment of fluoride in drinking water from Anhui Province in China

This study analyzes the concentrations and health risks of fluoride in 249 drinking water samples collected from different regions of Anhui Province in China. Results indicated that fluoride content in drinking water ranged from 0.12 to 1.94 mg L^?1 (mean?=?0.57 mg L^?1) in the following order: Huaibei plain region > Jianghuai hill region ≈ Dabieshan mountainous region > plain along the Yangtze River region > southern Anhui mountainous region. The fluoride contents were less than 0.50 mg L^?1 in 66.66 % of the drinking water samples, 0.51–1.0 mg L^?1 in 23.29 %, and higher than 1.0 mg L^?1 in 12.04 %. The fluoride levels in some samples were lower than the recommended values for controlling dental caries (0.50–1.0 mg L^?1). The total fluoride intake from drinking water was between 0.14 and 2.33 mg per day in different regions of the province, supposing an individual consumes 1.2 L of water per day. Therefore, measures should be taken to increase fluoride intake in the Jianghuai hill region, Dabieshan mountainous region, plain along the Yangtze River, and southern Anhui mountainous region to control dental caries. On the other hand, the fluoride levels must be reduced in the Huaibei plain region to decrease endemic fluorosis. The results serve as crucial guidelines for managing fluoride safety in drinking water and controlling endemic fluorosis in different regions of Anhui Province.     

Prediction of the solubility of zinc, copper, nickel, cadmium, and lead in metal-contaminated soils

Risk assessment of metal-contaminated soil depends on how precisely one can predict the solubility of metals in soils. Responses of plants and soil organisms to metal toxicity are explained by the variation in free metal ion activity in soil pore water. This study was undertaken to predict the free ion activity of Zn, Cu, Ni, Cd, and Pb in metal-contaminated soil as a function of pH, soil organic carbon, and extractable metal content. For this purpose, 21 surface soil samples (0–15 cm) were collected from agricultural lands of various locations receiving sewage sludge and industrial effluents for a long period. One soil sample was also collected from agricultural land which has been under intensive cropping and receiving irrigation through tube well water. Soil samples were varied widely in respect of physicochemical properties including metal content. Total Zn, Cu, Ni, Cd, and Pb in experimental soils were 2,015?±?3,373, 236?±?286, 103?±?192, 29.8?±?6.04, and 141?±?270 mg kg^?1, respectively. Free metal ion activity, viz., pZn²⁺, pCu²⁺, pNi²⁺, pCd²⁺, and pPb²⁺, as estimated by the Baker soil test was 9.37?±?1.89, 13.1?±?1.96, 12.8?±?1.89, 11.9?±?2.00, and 11.6?±?1.52, respectively. Free metal ion activity was predicted by pH-dependent Freundlich equation (solubility model) as a function of pH, organic carbon, and extractable metal. Results indicate that solubility model as a function of pH, Walkley–Black carbon (WBC), and ethylenediaminetetraacetic acid (EDTA)-extractable metals could explain the variation in pZn²⁺, pCu²⁺, pNi²⁺, pCd²⁺, and pPb²⁺ to the extent of 59, 56, 46, 52, and 51 %, respectively. Predictability of the solubility model based on pH, KMnO₄-oxidizable carbon, and diethylenetriaminepentaacetic acid-extractable or CaCl₂-extractable metal was inferior compared to that based on EDTA-extractable metals and WBC.     

A pragmatic approach to study the groundwater quality suitability for domestic and agricultural usage,Saq aquifer,northwest of Saudi Arabia

The present study deals with detailed hydrochemical assessment of groundwater within the Saq aquifer. The Saq aquifer which extends through the NW part of Saudi Arabia is one of the major sources of groundwater supply. Groundwater samples were collected from about 295 groundwater wells and analyzed for various physico-chemical parameters such as electrical conductivity (EC), pH, temperature, total dissolved solids (TDS), Na⁺, K⁺, Ca²⁺, Mg²⁺, CO₃ ^?, HCO₃ ^?, Cl^?, SO₄ ^2?, and NO₃ ^?. Groundwater in the area is slightly alkaline and hard in nature. Electrical conductivity (EC) varies between 284 and 9,902?μS/cm with an average value of 1,599.4 μS/cm. The groundwater is highly mineralized with approximately 30 % of the samples having major ion concentrations above the WHO permissible limits. The NO₃ ^? concentration varies between 0.4 and 318.2 mg/l. The depth distribution of NO₃ ^? concentration shows higher concentration at shallow depths with a gradual decrease at deeper depths. As far as drinking water quality criteria are concerned, study shows that about 33 % of samples are unfit for use. A detailed assessment of groundwater quality in relation to agriculture use reveals that 21 % samples are unsuitable for irrigation. Using Piper’s classification, groundwater was classified into five different groups. Majority of the samples show Mix-Cl-SO₄- and Na-Cl-types water. The abundances of Ca²⁺ and Mg²⁺ over alkalis infer mixed type of groundwater facies and reverse exchange reactions. The groundwater has acquired unique chemical characteristics through prolonged rock-water interactions, percolation of irrigation return water, and reactions at vadose zone.     

UV/H2O2 oxidation of arsenic and terbuthylazine in drinking water

Arsenic is a widespread contaminant in the environment. The intake of water containing high concentrations of arsenic could have serious impact on human health, such as skin and lung cancer. In the European Union, thus, also in Italy, the arsenic limit in drinking water is 10 μg L^?1. Several water remediation treatment technologies are available for arsenic removal. For some processes, the removal efficiencies can be improved after an oxidation step. Most full-scale applications are based on conventional oxidation processes for chemical micropollutant removal. However, if water contains arsenic and refractory organic contaminants, the advanced oxidation processes could be considered. The aim of this work was to investigate the effectiveness of ultraviolet (UV) radiation alone and in combination with hydrogen peroxide for the oxidation of arsenic and terbuthylazine (TBA). The experimental tests were performed in groundwater at the laboratory scale (0.1 mg L^?1 As(III) and 10 μg L^?1 TBA). Hydrogen peroxide alone (15 mg L^?1) was ineffective on both arsenic and TBA oxidation; the 253.7-nm radiation alone did not oxidize arsenic(III), but photolyzed efficiently TBA (52 % removal yield at a UV dose of 1,200 mJ cm^?2). The UV/H₂O₂ advanced oxidation (UV dose 600–2,000 mJ cm^?2, 5–15 mg L^?1 H₂O₂) was the most effective process for the oxidation of both arsenic and TBA, with observed oxidation efficiencies of 85 and 94 %, respectively, with 5 mg L^?1 H₂O₂ and a UV dose of 2,000 mJ cm^?2.     

Assessment of cylindrospermopsin toxin in an arid Saudi lake containing dense cyanobacterial bloom

This study reports the presence of the cyanobacterial toxin cylindrospermopisn (CYN) and its producer Cylindrospermopsis raciborskii for the first time in Saudi freshwater sources. C. raciborskii was found in Gazan Dam Lake water with two morphotypes (coiled and straight). The appearance and cell density of this species was significantly positively related to high temperature and high ammonium concentrations, and negatively with nitrate and phosphate concentrations in the lake. Intracellular concentrations of CYN (4–173 μg L^?1) were associated with C. raciborskii rather than other cyanobacteria with a maximal value obtained in June 2011, coinciding with the highest bloom of this species (19?×?10⁷ trichome L^?1). CYN cell quotas (0.6–14.6 pg cell^?1) varied significantly along the study period and correlated with most environmental factors. The results of ELISA and liquid chromatography-mass spectrometry proved that the CYN production by strains of this species was isolated from this lake during the present study, with an amount reaching 568 μg g^?1. Extracellular CYN was also detected in cell-free lake water at concentrations 0.03–23.3 μg L^?1, exceeding the drinking water guideline value of 1 μg L^?1 during the Apr–Jul period. As this lake is an important source for drinking and irrigation waters, CYN monitoring should be included in the environmental and health risk assessment plans of these water bodies.     

Distributions, sources, and ecological risks of DDT-related contaminants in water, suspended particulate matter, and sediments from Haihe Plain, Northern China

The residual levels of dichlorodiphenyltrichloroethane (DDT) and its metabolites (DDXs, including p,p′-DDT, DDD, and DDE) in water, suspended particulate matter (SPM), and sediments from major rivers, lakes, and reservoirs in Haihe Plain were measured with a gas chromatograph equipped with a ⁶³Ni microelectron capture detector. In the fall of 2004, the contents of the total DDXs in the water and SPM were 0.29?±?0.69 ng L^?1 and 423.13?±?577.85 ng g^?1 dry wt., respectively. In the spring of 2005, the total DDXs were 0.36?±?0.91 ng L^?1 for water and 35.93?±?62.65 ng g^?1 dry wt. for SPM. The average concentration of DDXs for sediments was 7.10?±?7.57 ng g^?1 dry wt. during the two seasons. The Eastern-Hebei-Province Coastland River System was the most polluted, which was mainly attributable to the extensive use of DDT pesticide and dicofol in that system. Recent DDT inputs still occur in some regions, as indicated by DDT/(DDD + DDE) > 1 at 29–36 % of the sites for water and 55–61 % of the sites for SPM. The potential ecological risks of DDT in the water were assessed using a species sensitivity distribution model. Only shrimp and crabs were found to have potentially affected fraction values of 1.63?×?10^?3 to 2.27?×?10^?4, with probabilities beyond the hazardous concentration for 5 % of species (HC5) values of 1.90–2.56 %, suggesting only slight risks. DDXs in the sediments of some sites were also of potential risk to benthic organism based on consensus-based sediment quality guidelines.     

Water quality of Mediterranean coastal plains: conservation implications from the Akyatan Lagoon,Turkey

The water quality of the Akyatan Lagoon was characterized using hydrochemical methodology. The lagoon is located on the Mediterranean coast and is the largest wetland ecosystem in Turkey. In addition, the lagoon is classified as a hyper-salinity wetland. Water samples were collected monthly between December 2007 and November 2008. Eleven stations within the lagoon were determined, and triplicate grab samples were obtained from each station to characterize water quality as follows: T °C, pH, total alkalinity (TAlk), dissolved oxygen (DO), total dissolved solids (TDS), salinity, electrical conductivity (EC), and main anions, including chloride (Cl^?), nitrates (NO₃ ^?), and sulfate (SO₄ ^2?). Results from selected stations indicated varying TDS, EC, salinity, and Cl^? concentrations, from 20,892 to 175,824 mg/L, from 35.7 to 99.6 mS/cm, from 22.3 to 71.0 ppt, and from 14,819 to 44,198 mg Cl^?/L, respectively. Data indicated that the spatial distribution of water quality parameters was significantly affected by freshwater input via the constructed drainage channels which collect water from a catchment area and discharge water into the lagoon as a point source, thus preventing drainage water to reach the lagoon as a nonpoint source.     

Impact of ultrasonic treatment on dewaterability of sludge during Fenton oxidation

Fenton oxidation was compared with Fenton oxidation coupled with ultrasonication (Fenton?+?US) for sludge dewatering. Different Fenton reagent (H₂O₂, Fe²⁺) concentrations, pH, and reaction times were studied in different systems on the basis of the specific resistance to filtration (SRF) and capillary suction time (CST). It was found that Fenton?+?US can significantly reduce Fe²⁺ and H₂O₂ dosages and reaction times. After ultrasonication of the system at pH 3, with an ultrasonic frequency of 25 kHz and a sound energy density of 100 W/L, the Fe²⁺, H₂O₂ dosage, and reaction time were reduced by 66.7, 75.0, and 75.0 %, respectively, when compared with Fenton oxidation at the same dewaterability of sludge. The microstructure of sludge and hydroxyl radical (·OH) density in Fenton oxidation and Fenton?+?US was further examined. Fenton?+?US produced more?·?OH in a sludge system than did individual Fenton oxidation. The concentration of?·?OH in Fenton?+?US fell from 79.2 to 6 mg/L over 3.5 h, while the concentration of?·?OH in Fenton oxidation fell from 59.6 to 1 mg/L over 2 h, thus destroying the microstructure of sludge more effectively. Sludge treated using Fenton?+?US for 30 min showed a much thinner and looser microstructure.     

An assessment of contamination of the Fusaro Lagoon (Campania Province,southern Italy) by trace metals

The Fusaro Lagoon is a shallow lagoon, located in SW Italy, largely influenced in the last decades by several anthropic impacts. The study examined the pollution status of the lagoon, during year 2011–2012 at nine sampling stations with the aim to find out proper measurements of water lagoon restoration. Concentrations of heavy metals (HMs) (aluminium [Al], barium [Ba], cadmium [Cd], copper [Cu], iron [Fe], manganese [Mn], vanadium [V] and zinc [Zn]) were examined in water, sediments and specimens of the ascidian Ciona intestinalis sp. A. Low levels of dissolved oxygen concentration were detected at many stations, with mean values of 5.2–6.4 mg L^?1. The redox potential of surface waters was also low, ?2.7 to 50.7 mV. Sediments possessed high organic matter content, 17.7–29.4 %. In sediments, the mean Zn level, 251.4 mg kg^?1, was about sixfold higher than that recorded in year 2000 (38.5 mg kg^?1) and considerably higher than that recorded in 2007 (191 mg kg^?1). The mean levels of Cd were outstandingly high, with a mean value of 70.5 mg kg^?1, about 30- and 50-fold higher than those determined in 2000 and 2007, respectively. Cadmium (Cd), Cu and nickel (Ni) appeared in excess with respect to most current guidelines, reaching significant pollution levels. C. intestinalis sp. A was detected only at few stations, with metals accumulated preferentially in the body in respect to the tunic, from 1.2 times for Zn (178 mg kg^?1) to 4.0 times for V (304 mg kg^?1). Data suggests the necessity of an immediate action of eco-compatible interventions for environmental restoration.     

Quantification of PAHs and chlorinated compounds by novel solid-phase microextraction based on the arrays of tin oxide nanorods

The results of an innovative study on a new and highly efficient stationary phase based on the SnO₂ nanorods coating on fused silica have been reported in this paper. SnO₂ nanorods have been grown on fused silica fibers using a hydrothermal process. The extraction properties of the fiber were investigated using headspace solid-phase microextraction (HS-SPME) mode coupled with gas chromatography–mass spectrometry detection for 1,4-dichloro-2-nitrobenzene, biphenyl, and acenaphthene. The effect of different variables on extraction efficiency was studied simultaneously using Box–Behnken method as experimental design. The variables of interest in the HS-SPME were salt effect, adsorption temperature, extraction, and desorption time. Under optimal conditions, the calibration curves were linear up to 10²–10⁵ ng?L^?1 (R ²?>?0.998) with detection limits of 10^?3, 10^?1, and 10 ng?L^?1 for acenaphthene, biphenyl, and 1,4-dichloro-2-nitrobenzene, respectively. The relative standard deviations for single fiber and fiber to fiber were less than 9.8 and 12.5 %, respectively. The high stability of the SnO₂ nanostructure coating is proved at relatively high temperatures (up to 300 °C) with a high extraction capacity and long lifespan (more than 100 times). By applying the proposed technique, promising recoveries (93–98 %) were obtained in the analysis of environmental water samples.     

A nanosilver-based spectrophotometric method for determination of malachite green in surface water samples

A new spectrophotometric method is reported for the determination of nanomolar level of malachite green in surface water samples. The method is based on the catalytic effect of silver nanoparticles on the oxidation of malachite green by hexacyanoferrate (III) in acetate–acetic acid medium. The absorbance is measured at 610 nm with the fixed-time method. Under the optimum conditions, the linear range was 8.0?×?10^?9–2.0?×?10^?7?mol?L^?1 malachite green with a correlation coefficient of 0.996. The limit of detection (S/N?=?3) was 2.0?×?10^?9?mol?L^?1. Relative standard deviation for ten replicate determinations of 1.0?×?10^?8?mol?L^?1 malachite green was 1.86 %. The method is featured with good accuracy and reproducibility for malachite green determination in surface water samples without any pre-concentration and separation step.     

Application of cold-induced aggregation microextraction as a fast,simple, and organic solvent-free method for the separation and preconcentration of Se(IV) in rice and various water samples

The developed method is based on cold-induced aggregation microextraction of Se(IV) using the 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid as an extractant followed by spectrophotometry determination. The extraction of Se(IV) was performed in the presence of dithizone as the complexing agent. In this method, a very small amount of 1-butyl-3-methylimidazolium hexafluorophosphate was added to the sample solution containing Se-dithizone complex. Then, the solution was kept in a thermostated bath at 50 °C for 4 min. Subsequently, the solution was cooled in an ice bath and a cloudy solution was formed. After centrifuging, the extractant phase was analyzed using a spectrophotometric detection method. Some important parameters that might affect the extraction efficiency were optimized (HCl, 0.6 mol L^?1; dithizone, 4.0?×?10^?6 mol L^?1; ionic liquid, 100 μL). Under the optimum conditions, good linear relationship, sensitivity, and reproducibility were obtained. The limit of detection (LOD) (3S_b/m) was 1.5 μg L^?1, and the relative standard deviation (RSD) was 1.2 % for 30 μg L^?1 of Se(IV). The linear range was obtained in the range of 5–60 μg L^?1. It was satisfactory to analyze rice and various water samples.     

Rapid spectrophotometric determination of trace amounts of palladium in water samples after dispersive liquid–liquid microextraction

A simple, rapid, and efficient dispersive liquid–liquid microextraction method, followed by UV–Vis spectrophotometry was developed for the preconcentration and determination of Pd ions in water samples. Pd ions react with α-furildioxime (chelating agent) to form a hydrophobic complex. Various parameters were altered to study and optimize their effects on the extraction efficiency, such as pH, ligand concentration, the type and volume of extraction and dispersive solvents, extraction time, and salt concentration. Under optimized conditions, the method exhibited an enrichment factor (C _org/C _aq) of 25 and recovery more than 98 % within a very short extraction time. The linearity of the method ranged from 10 to 200 μg?L^?1. The limit of detection was 1.1 μg?L^?1. The relative standard deviation for the concentration of 100 μg?L^?1 of Pd was 2.3 % (n?=?10). Finally, the developed method was successfully applied to the extraction and determination of Pd in tap, river, mineral, and sea water samples.