Characteristics of chlorofluorocarbons (CFCs) emitted from a municipal waste treatment facility

The emission concentrations of several chlorofluorocarbons (CFCs) were measured from a municipal waste treatment facility (located in Seoul, Republic of Korea) to investigate the emission characteristics of CFCs in the urban environment. To this end, a total of five CFCs (CFC-10, CFC-11, CFC-20, CFC-30, and CFC-113) were analyzed by the thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) method. The results of this study indicate that the formation of CFC-11 (8.21 ± 1.68 ppb in spring) and CFC-20 (3.92 ± 3.93 ppb in spring) proceeded very actively within the facility. Moreover, CFC-113 was also found in relatively high concentrations (3.34 ± 1.31 ppb in spring) in the treatment facility. Unlike other CFCs, CFC-10 was observed mainly at ambient (and reference) locations and one point inside the treatment facility. In conclusion, emissions of some important CFCs are a prominent process, as they were measured either frequently or abundantly both in winter and spring. It is further indicated that certain CFCs (like CFC-11 and CFC-30) are subject to highly significant seasonal variations.     

Decline in the concentrations of chlorofluorocarbons (CFC-11, CFC-12 and CFC-113) in an urban area of Beijing,China

During this study 352 whole air samples were collected in an urban area of Beijing between January 2005 and March 2007. The temporal variation of the concentrations of chlorofluorocarbons (CFCs: CFC-11, CFC-12, and CFC-113) in air in the Beijing urban atmosphere is presented and discussed. The weighted mean monthly values of these concentrations have been compared with the data from the north hemisphere. It has been concluded that, in the observed period of time, the mean enhancement of CFCs was relatively small, with increase of 10–15%, with respect to the global background. Change rate in concentrations of CFCs is −1.39, −1.04, and −0.16 pptv/month for CFC-11, CFC-12, and CFC-113, respectively. The tendency of the CFC concentration of the three compounds toward background values is observed to fall and indicates that limitation of emission of CFCs is taking effect, under the Montreal Protocol.     

Analysis of 3-year observations of CFC-11, CFC-12 and CFC-113 from a semi-rural site in China

In-situ measurements of atmospheric chlorofluorocarbons (CFCs) can be used to the assess their global and regional emissions and to check for compliance with phase-out schedules under Montreal protocol and its amendments. The atmospheric mixing ratios of CFC-11 (CCl₃F), CFC-12 (CCl₂F₂) and CFC-113 (CCl₂F–CClF₂) have been measured by an automated in-situ GC-ECDs system at the regional Chinese Global Atmosphere Watch (GAW) station Shangdianzi (SDZ), from November 2006 to October 2009. The time series for these three principal CFCs showed large episodic events and background conditions occurred for approximately 30% (CFC-11), 52% (CFC-12) and 56% (CFC-113) of the measurements. The mean background mixing ratios for CFC-11, CFC-12 and CFC-113 were 244.8 ppt (parts per trillion, 10^?12, molar) 539.6 ppt and 76.8 ppt, respectively, for 2006–2009. The enhanced CFC mixing ratios compared to AGAGE sites such as Trinidad Head (THD), US and Mace Head (MHD), Ireland suggest regional influences even during background conditions at SDZ, which is much closer to highly-populated areas. Between 2006 and 2009 background CFCs exhibited downward trends at rates of ?2.0 ppt yr^?1 for CFC-11, ?2.5 ppt yr^?1 for CFC-12 and ?0.7 ppt yr^?1 for CFC-113. De-trended 3-year average background seasonal cycles displayed small fluctuations with peak-to-trough amplitudes of 1.0 ± 0.02 ppt (0.4%) for background CFC-11, 1.3 ± 2.1 ppt (0.3%) for CFC-12 and 0.2 ± 0.4 ppt (0.3%) for CFC-113. On the other hand, during pollution periods these CFCs showed much larger seasonal cycles of 11.2 ± 10.7 ppt (5%) for CFC-11, 7.5 ± 6.5 ppt (2%) for CFC-12 and 1.0 ± 1.2 ppt (1.2%) for CFC-113, with apparent winter minima and early summer maxima. This enhancement was attributed to prevailing wind directions from urban regions in summer and to enhanced anthropogenic sources during the warm season. In general, horizontal winds from northeast showed negative contribution to atmospheric CFCs loading, whereas South Western advection (urban sector: Beijing) had positive contributions.     

Historic emissions of fluorotrichloromethane (CFC-11) based on a market survey

Releases of CFCs occur promptly from applications such as aerosol sprays, or over a period of several years from refrigeration and air conditioning or more slowly still from use as blowing agents for closed cell plastic foams. As a consequence of the Montreal Protocol, the emissions have fallen and their pattern is continuing to change. To help quantify these changes the emissions from closed cell foam blowing have been re-examined in a comprehensive market survey, developing a lifecycle assessment for each foam type, production method and foaming agent.The original model for the time series of emissions from foam applications was shown to remain a robust representation in general terms. There is an “immediate” loss when the foam is manufactured, a slow emission from the foam itself during use and a loss on disposal of the artefact made with the foam. The original model used an initial loss rate of 10% and a subsequent loss of 4.5% yr⁻¹ over 20 yr.The new survey showed a wide range of initial and service loss rates. Immediate release ranges from 95% down to 4%; similarly, the rate of loss during service varies from 0.5% to 5% yr⁻¹ and the service lifetimes of the artefacts made with the foams varies from 12 to 50 yr. The apparent emission function, in terms of the mean value of the annual fractional release from the bank of CFC-11 residing in foams, was calculated from the survey to be 0.043±0.008 over 28 yr. There is a small and non-significant fall in this function with time; so that over the last ten years of the data record the more appropriate value is 0.0366±0.0008. However, up to the early 1990s, it is the original emission function that is consistent with the observed atmospheric concentrations. Thenceforth this function seriously overpredicts the concentrations but, if the new emissions function for foams is used from 1993 onwards in conjunction with the original emission functions for all other uses, the fit becomes better. This suggests that the emission functions for prompt and short term releases remain valid and should be coupled with the new function to calculate emissions of CFC-11 or other fluorocarbon foam blowing agents from the early 1990s onwards.     

Surface ozone background in the United States: Canadian and Mexican pollution influences

We use a global chemical transport model (GEOS-Chem) with 1° × 1° horizontal resolution to quantify the effects of anthropogenic emissions from Canada, Mexico, and outside North America on daily maximum 8-hour average ozone concentrations in US surface air. Simulations for summer 2001 indicate mean North American and US background concentrations of 26 ± 8 ppb and 30 ± 8 ppb, as obtained by eliminating anthropogenic emissions in North America vs. in the US only. The US background never exceeds 60 ppb in the model. The Canadian and Mexican pollution enhancement averages 3 ± 4 ppb in the US in summer but can be occasionally much higher in downwind regions of the northeast and southwest, peaking at 33 ppb in upstate New York (on a day with 75 ppb total ozone) and 18 ppb in southern California (on a day with 68 ppb total ozone). The model is successful in reproducing the observed variability of ozone in these regions, including the occurrence and magnitude of high-ozone episodes influenced by transboundary pollution. We find that exceedances of the 75 ppb US air quality standard in eastern Michigan, western New York, New Jersey, and southern California are often associated with Canadian and Mexican pollution enhancements in excess of 10 ppb. Sensitivity simulations with 2020 emission projections suggest that Canadian pollution influence in the Northeast US will become comparable in magnitude to that from domestic power plants.     

The surface radiative forcing of nitric acid for northern mid-latitudes

Ground-based, high-resolution measurements of downward atmospheric thermal emission spectra are reported for a northern mid-latitude location for summer and winter conditions. These measurements clearly show the presence of the 11.3-μm thermal emission band of nitric acid situated between 850–920 cm⁻¹. By using the FASCOD3 line-by-line radiation code to simulate the background thermal emission, the measured seasonally averaged surface radiative forcing due to nitric acid is determined to be 0.055 W m⁻²±15%. The zenith column amounts of nitric acid are found to vary between 7.9×10¹⁵ and 1.1×10¹⁶ molecules cm⁻²±15%. An estimation is made of the contribution of nitric acid to the direct radiative forcing of the Earth's surface since pre-industrial times for northern mid-latitudes. This work suggests that nitric acid may play a role that is comparable to that of other greenhouse gases, such as CFC-11, in the forcing of the Earth's climate system. Under polluted conditions, nitric acid may contribute about half of the radiative forcing that is currently associated with tropospheric ozone.     

Ambient sulfur dioxide,nitrogen dioxide,and ammonia at ten background and rural sites in China during 2007–2008

We present two years (January 2007–December 2008) of atmospheric SO₂, NO₂ and NH₃ measurements from ten background or rural sites in nine provinces in China. The measurements were made on a monthly basis using passive samplers under careful quality control. The results show large geographical and seasonal variations in the concentrations of these gases. The mean SO₂ concentration varied from 0.7 ± 0.4 ppb at Waliguan on Qinghai Plateau to 67.3 ± 31.1 ppb at Kaili in Guizhou province. The mean NO₂ concentration ranged from 0.6 ± 0.4 ppb at Waliguan to 23.9 ± 6.9 ppb at Houma in southern Shanxi. The mean NH₃ concentration ranged from 2.8 ± 3.0 ppb at Shangdianzi in northeastern Beijing to 13.7 ± 8.4 ppb at Houma. At most sites, SO₂ and NO₂ peaked in winter and reached minima in summer, while NH₃ showed maximum values in summer and lower values in cold seasons. On the whole, the geographical distributions of the observed gas concentrations are consistent with those of emissions. The ground measurements of SO₂ and NO₂ are contrasted to the SCIAMACHY SO₂ and OMI NO₂ tropospheric columns, respectively. Although the satellite data can capture the main features of emissions and concentrations of SO₂, they do not reflect the variations of SO₂ in the surface layer. The situation is better for the case of NO₂. The OMI NO₂ columns capture the geographical differences in the ground NO₂ and correlate fairly well with the ground levels of NO₂ at six of the ten sites.     

Multi-pollutant concentration measurements around a concentrated swine production facility using open-path FTIR spectrometry

Open-path Fourier transform infrared (OP/FTIR) spectrometry was used to measure the concentrations of ammonia, methane, and other atmospheric gases around an integrated industrial swine production facility in eastern North Carolina. Several single-path measurements were made over an 8-day period from 11 to 22 January 1999. Nine different monitoring paths were configured to determine the concentration ranges of ammonia and methane throughout this facility, with an emphasis on isolating the emissions from the farrowing/nursery barns, the finishing barns, and the waste lagoon. A series of sequential measurements was made on 13 January 1999, to estimate the target gas concentrations downwind from each of these sources and at an upwind background site under similar meteorological conditions. The path-averaged concentration (mean±standard deviation) of ammonia during these measurements was below the estimated method detection limit of 0.003 ppm at the background site, 0.328±0.044 ppm between the farrowing/nursery and finishing barns, 2.063±0.140 ppm perpendicular to the airflow from the exhaust fans of the finishing barns, 0.488±0.110 ppm along the western berm of the lagoon, and 0.722±0.659 ppm along the eastern berm of the lagoon. The mean-path-averaged concentration of methane during this same time period was 1.89±0.03 ppm at the background site, 2.58±0.11 ppm between the farrowing/nursery and finishing barns, 2.70±0.05 ppm perpendicular to the airflow from the exhaust fans of the finishing barns, 2.27±0.06 ppm along the western berm of the lagoon, and 11.02±9.69 ppm along the eastern berm of the lagoon as the prevailing westerly winds died down. The concentration measurements made along different monitoring paths during this study indicate that the confinement barns can be a significant source of ammonia, while the lagoon is a major source of methane. Attempts to apply tracer-based dispersion modeling techniques to the single-path OP/FTIR data to estimate emission rates of ammonia and methane from the different sources present at this facility were met with limited success.     

Compound specific carbon and hydrogen stable isotope analyses of volatile organic compounds in various emissions of combustion processes

This study presents carbon (δ¹³C) and hydrogen (δD) isotope values of volatile organic compounds (VOCs) in various emission sources using thermal desorption–gas chromatography–isotope ratio mass spectrometry (TD–GC–irMS). The investigated VOCs ranged from C6 to C10. Samples were taken from (i) car exhaust emissions as well as from plant combustion experiments of (ii) various C3 and (iii) various C4 plants. We found significant differences in δ values of analysed VOCs between these sources, e.g. δ¹³C of benzene ranged between (i) −21.7 ± 0.2‰, (ii) −27.6 ± 1.6‰ and (iii) −16.3 ± 2.2‰, respectively and δD of benzene ranged between (i) −73 ± 13‰, (ii) −111 ± 10‰ and (iii) −70 ± 24‰, respectively. Results of VOCs present in investigated emission sources were compared to values from the literature (aluminium refinery emission). All source groups could be clearly distinguished using the dual approach of δ¹³C and δD analysis. The results of this study indicate that the correlation of compound specific carbon and hydrogen isotope analysis provides the potential for future research to trace the fate and to determine the origin of VOCs in the atmosphere using thermal desorption compound specific isotope analysis.     

Surface ozone at the Swiss Alpine site Arosa: the hemispheric background and the influence of large-scale anthropogenic emissions

An innovative and effective method using isentropic trajectory analysis based on the residence time of air masses over the polluted region of Europe was successfully applied to categorize surface ozone amounts at Arosa, Switzerland during 1996–1997. The “European representative” background ozone seasonal cycle at Arosa is associated with long-range transport of North Atlantic air masses, and displays the spring maximum–summer minimum with an annual average of 35 ppb. The photochemical ozone production due to the intense large-scale anthropogenic emission over Europe is estimated as high as 20 ppb in summer, whereas it is insignificant in winter. European sources contribute an annual net ozone production of 9–12 ppb at Arosa. Comparison with the selected regional representative site in Western Europe shows similar results indicating that the categorized ozone data at Arosa by this technique could be regarded as a representative for northern hemispheric mid-latitudes.     

Nitric oxide emissions from soils amended with municipal waste biosolids

Land spreading nitrogen-rich municipal waste biosolids (NO₃⁻-N<256 mg N kg⁻¹ dry weight, NH₃-N∼23,080 mg N kg⁻¹ dry weight, Total Kjeldahl N∼41,700 mg N kg⁻¹ dry weight) to human food and non-food chain land is a practice followed throughout the US. This practice may lead to the recovery and utilization of the nitrogen by vegetation, but it may also lead to emissions of biogenic nitric oxide (NO), which may enhance ozone pollution in the lower levels of the troposphere. Recent global estimates of biogenic NO emissions from soils are cited in the literature, which are based on field measurements of NO emissions from various agricultural and non-agricultural fields. However, biogenic emissions of NO from soils amended with biosolids are lacking. Utilizing a state-of-the-art mobile laboratory and a dynamic flow-through chamber system, in-situ concentrations of nitric oxide (NO) were measured during the spring/summer of 1999 and winter/spring of 2000 from an agricultural soil which is routinely amended with municipal waste biosolids. The average NO flux for the late spring/summer time period (10 June 1999–5 August 1999) was 69.4±34.9 ng N m⁻² s⁻¹. Biosolids were applied during September 1999 and the field site was sampled again during winter/spring 2000 (28 February 2000–9 March 2000), during which the average flux was 3.6±1.7 ng N m⁻² s⁻¹. The same field site was sampled again in late spring (2–9 June 2000) and the average flux was 64.8±41.0 ng N m⁻² s⁻¹. An observationally based model, developed as part of this study, found that summer accounted for 60% of the yearly emission while fall, winter and spring accounted for 20%, 4% and 16% respectively. Field experiments were conducted which indicated that the application of biosolids increases the emissions of NO and that techniques to estimate biogenic NO emissions would, on a yearly average, underestimate the NO flux from this field by a factor of 26. Soil temperature and % water filled pore space (%WFPS) were observed to be significant variables for predicting NO emissions, however %WFPS was found to be most significant during high soil temperature conditions. In the range of pH values found at this site (5.8±0.3), pH was not observed to be a significant parameter in predicting NO emissions.     

Sulfuric odorous compounds emitted from pig-feeding operations

The objective of the study was to quantify the concentration and emission levels of sulfuric odorous compounds emitted from pig-feeding operations. Five types of pig-housing rooms were studied: gestation, farrowing, nursery, growing and fattening rooms. The concentration range of sulfuric odorous compounds in these pig-housing rooms were 30–200 ppb for hydrogen sulfide (H₂S), 2.5–20 ppb for methyl mercaptan (CH₃SH), 1.5–12 ppb for dimethyl sulfide (DMS; CH₃SCH₃) and 0.5–7 ppb for dimethyl disulfide (DMDS; CH₃S₂CH₃), respectively. The emission rates of H₂S, CH₃SH, DMS and DMDS were estimated by multiplying the average concentration (mg m⁻³) measured near the air outlet by the mean ventilation rate (m³ h⁻¹) and expressed either per area (mg m⁻² h⁻¹) or animal unit (AU; liveweight of the pig, 500 kg) (mg pig⁻¹ h⁻¹). As a result, the emission rates of H₂S, CH₃SH, DMS and DMDS in the pig-housing rooms were 14–64, 0.8–7.3, 0.4–3.4 and 0.2–1.9 mg m⁻² h⁻¹, respectively, based on pig's activity space and 310–723, 18–80, 9–39 and 5–22 mg AU⁻¹ h⁻¹, respectively, based on pig's liveweight, which indicates that their emission rates were similar, whether based upon the pig's activity space or liveweight. In conclusion, the concentrations and emission rates of H₂S were highest in the fattening room followed by the growing, nursery, farrowing and gestation rooms whereas those of CH₃SH, DMS and DMDS concentrations were largest in the growing room followed by the nursery, gestation and farrowing rooms.     

Isoprene and monoterpene emission from the coniferous species Abies Borisii-regis—implications for regional air chemistry in Greece

The emission of isoprene has been studied from a forest of Abies Borisii-regis, a Mediterranean fir species previously thought to emit only monoterpenes. Emission studies from two independent enclosure experiments indicated a standardised isoprene emission rate of (18.4±3.8) μg g_dry-weight⁻¹ h⁻¹, similar in magnitude to species such as eucalyptus and oak which are considered to be strong isoprene emitters. Isoprene emission depended strongly on both leaf temperature (2°C–34°C) and photosynthetically active radiation (PAR) below 250 μmol m⁻² s⁻¹, becoming saturated with respect to PAR above this value. The annual isoprene emission rate was estimated to be (132±29) kT yr⁻¹ for those trees growing within Greece, comparable to current estimates of the total isoprene budget of Greece as a whole, and contributing significantly to regional ozone and carbon monoxide budgets. Monoterpene emission exhibited exponential temperature dependence, with 1,8-cineole, α-pinene, β-pinene and limonene forming the primary emissions. A standardised total monoterpene emission rate of (2.7±1.1) μg g_dry-weight⁻¹ h⁻¹ was calculated, corresponding to an annual monoterpene emission rate of (24±12) kT yr⁻¹. Research was conducted as part of the AEROBIC’97 (AEROsol formation from BIogenic organic Carbon) series of field campaigns.     

Peroxyacetyl nitrate and peroxypropionyl nitrate in Porto Alegre,Brazil

For 41 days between 25 May 1996 and 27 March 1997, peroxyacetyl nitrate (PAN) and peroxypropionyl nitrate (PPN) have been measured by electron capture gas chromatography at Santa Rita near Porto Alegre, RS, Brazil, where light-duty vehicles used either ethanol or a gasoline–MTBE blend. Daily maximum concentrations ranged from 0.19 to 6.67 ppb for PAN and 0.06 to 0.72 ppb for PPN. Linear regression of maximum PPN vs. maximum PAN yielded a slope of 0.105±0.004 (R²=0.974). Diurnal variations of ambient PAN often followed those of ozone with respect to time of day but not with respect to amplitude. This was reflected in the large relative standard deviations associated with the study-averaged PAN/ozone concentration ratio, 0.037±0.105 (ppb/ppb, n=789) and the maximum PAN/maximum ozone concentration ratio, 0.028±0.015 (ppb/ppb, range 0.005–0.078, n=41). On several days PAN accounted for large fractions of the total ambient NO_x in the late morning and afternoon hours, e.g., PAN/NO_x⩽0.58 and PAN/(NO_x–NO) ⩽0.76 on 27 March 1997. The amount of PAN lost by thermal decomposition (TPAN) was comparable in magnitude to that present in ambient air. The ratios TPAN/(PAN+TPAN) were up to 0.53, 0.67 and 0.64 during the warm afternoons of 25, 26 and 27 March 1997, respectively. The highest calculated value of TPAN was 5.6 ppb on 27 March 1997. On that day the 24 h-averaged value of TPAN (1.01 ppb) was nearly the same as that of PAN (1.09 ppb). Using computer kinetic modeling (SAPRC 97 chemical mechanism) and sensitivity analysis of VOC incremental reactivity, we ranked VOC present in Porto Alegre ambient air for their importance as precursors to PAN and to PPN. Using as input data the averages of VOC concentrations measured in downtown Porto Alegre during the ca. 1 yr period March 1996–April 1997, we calculated that the most important precursors to PAN and PPN were the SAPRC 97 model species ARO2 (which includes the aromatics xylenes, trimethylbenzenes, ethyltoluenes, etc.), which accounted for ca. 17% of the total PAN and total PPN formation potentials. Overall, the results indicate a major role for aromatics and alkenes and a minor role for acetaldehyde and ethanol as precursors to peroxyacyl nitrates in the Porto Alegre urban area.     

Characterization of emissions from portable household combustion devices: particle size distributions,emission rates and factors,and potential exposures

A series of source tests were conducted to characterize emissions of particulate matter (PM), carbon monoxide (CO), carbon dioxide (CO₂), methane (CH₄), and total hydrocarbon (THC ) from five types of portable combustion devices. Tested combustion devices included a kerosene lamp, an oil lamp, a kerosene space heater, a portable gas range, and four unscented candles. All tests were conducted either in a well-mixed chamber or a well-mixed room, which enables us to determine emission rates and emission factors using a single-compartment mass balance model. Particle mass concentrations and number concentrations were measured using a nephelometric particle monitor and an eight-channel optical particle counter, respectively. Real-time CO concentrations were measured with an electrochemical sensor CO monitor. CO₂, CH₄, and THC were measured using a GC-FID technique. The results indicate that all particles emitted during steady burning in each of the tested devices were smaller than 1.0 μm in diameter with the vast majority in the range between 0.1 and 0.3 μm. The PM mass emission rates and emission factors for the tested devices ranged from 5.6±0.1 to 142.3±40.8 mg h⁻¹ and from 0.35±0.06 to 9.04±4.0 mg g⁻¹, respectively. The CO emission rates and emission factors ranged from 4.7±3.0 to 226.7±100 mg h⁻¹ and from 0.25±0.12 to 1.56±0.7 mg g⁻¹, respectively. The CO₂ emission rates and emission factors ranged from 5500±700 to 210,000±90,000 mg h⁻¹ and from 387±45 to 1689±640 mg g⁻¹, respectively. The contributions of CH₄ and THC to emission inventories are expected to be insignificant due both to the small emission factors and to the relatively small quantity of fuel consumed by these portable devices. An exposure scenario analysis indicates that every-day use of the kerosene lamp in a village house can generate fine PM exposures easily exceeding the US promulgated NAAQS for PM_2.5.     

Receptor modeling of source apportionment of Hong Kong aerosols and the implication of urban and regional contribution

Understanding the spatial–temporal variations of source apportionment of PM_2.5 is critical to the effective control of particulate pollution. In this study, two one-year studies of PM_2.5 composition were conducted at three contrasting sites in Hong Kong from November 2000 to October 2001, and from November 2004 to October 2005, respectively. A receptor model, principal component analysis (PCA) with absolute principal component scores (APCS) technique, was applied to the PM_2.5 data for the identification and quantification of pollution sources at the rural, urban and roadside sites. The receptor modeling results identified that the major sources of PM_2.5 in Hong Kong were vehicular emissions/road erosion, secondary sulfate, residual oil combustion, soil suspension and sea salt regardless of sampling sites and sampling periods. The secondary sulfate aerosols made the most significant contribution to the PM_2.5 composition at the rural (HT) (44 ± 3%, mean ± 1σ standard error) and urban (TW) (28 ± 2%) sites, followed by vehicular emission (20 ± 3% for HT and 23 ± 4% for TW) and residual oil combustion (17 ± 2% for HT and 19 ± 1% for TW). However, at the roadside site (MK), vehicular emissions especially diesel vehicle emissions were the major source of PM_2.5 composition (33 ± 1% for diesel vehicle plus 18 ± 2% for other vehicles), followed by secondary sulfate aerosols (24 ± 1%). We found that the contribution of residual oil combustion at both urban and rural sites was much higher than that at the roadside site (2 ± 0.4%), perhaps due to the marine vessel activities of the container terminal near the urban site and close distance of pathway for the marine vessels to the rural site. The large contribution of secondary sulfate aerosols at all the three sites reflected the wide influence of regional pollution. With regard to the temporal trend, the contributions of vehicular emission and secondary sulfate to PM_2.5 showed higher autumn and winter values and lower summer levels at all the sites, particularly for the background site, suggesting that the seasonal variation of source apportionment in Hong Kong was mainly affected by the synoptic meteorological conditions and the long-range transport. Analysis of annual patterns indicated that the contribution of vehicular emission at the roadside was significantly reduced from 2000/01 to 2004/05 (p < 0.05, two-tail), especially the diesel vehicular emission (p < 0.001, two-tail). This is likely attributed to the implementation of the vehicular emission control programs with the tightening of diesel fuel contents and vehicular emission standards over these years by the Hong Kong government. In contrast, the contribution of secondary sulfate was remarkably increased from 2001 to 2005 (p < 0.001, two-tail), indicating a significant growth in regional sulfate pollution over the years.     

Personal exposures to NO2 in the EXPOLIS-study: relation to residential indoor,outdoor and workplace concentrations in Basel,Helsinki and Prague

Personal exposures, residential indoor, outdoor and workplace levels of nitrogen dioxide (NO₂) were measured for 262 urban adult (25–55 years) participants in three EXPOLIS centres (Basel; Switzerland, Helsinki; Finland, and Prague; Czech Republic) using passive samplers for 48-h sampling periods during 1996–1997. The average residential outdoor and indoor NO₂ levels were lowest in Helsinki (24±12 and 18±11 μg m⁻³, respectively), highest in Prague (61±20 and 43±23 μg m⁻³), with Basel in between (36±13 and 27±13 μg m⁻³). Average workplace NO₂ levels, however, were highest in Basel (36±24 μg m⁻³), lowest in Helsinki (27±15 μg m⁻³), with Prague in between (30±18 μg m⁻³). A time-weighted microenvironmental exposure model explained 74% of the personal NO₂ exposure variation in all centres and in average 88% of the exposures. Log-linear regression models, using residential outdoor measurements (fixed site monitoring) combined with residential and work characteristics (i.e. work location, using gas appliances and keeping windows open), explained 48% (37%) of the personal NO₂ exposure variation. Regression models based on ambient fixed site concentrations alone explained only 11–19% of personal NO₂ exposure variation. Thus, ambient fixed site monitoring alone was a poor predictor for personal NO₂ exposure variation, but adding personal questionnaire information can significantly improve the predicting power.     

Emission of N2O on pulse–rice crop rotation in upland

The Seasonally Integrated Flux (SIF) of N₂O emission during pulse cultivation in Rabi season (Season-I: December to April) in rain-fed uplands of Orissa, was found to be 17.7 ± 0.07, 18.7 ± 0.16 and 43.3 ± 0.14 gha^?1 for horse gram (HG), black gram (BG) and green gram (GG) respectively. During the subsequent Rabi season (Season-II), the SIF of N₂O for BG and GG cultivated in the same fields were 20.9 ± 0.24 and 38.0 ± 0.42 gha^?1 respectively. Similarly SIF values during rice cultivation with different cultivars have also been calculated to be in the range ?20.05 ± 0.33 to 21.98 ± 0.29. Statistical analysis showed good correlation of N₂O emission with climatic and soil parameters like temperature, nutrient N and organic matter in soil during pulse cultivation. Multivariate analysis was carried out to factorize the results obtained. Using student ‘t’ test, the N₂O emission was observed to be similar for two consecutive Rabi seasons for pulses like BG and GG.     

Surface ozone at four remote island sites and the preliminary assessment of the exceedances of its critical level in Japan

Analysis of the recent surface ozone data at four remote islands (Rishiri, Oki, Okinawa, and Ogasawara) in Japan indicates that East Asian anthropogenic emissions significantly influence the boundary layer ozone in Japan. Due to these regional-scale emissions, an increase of ozone concentration is observed during fall, winter, and spring when anthropogenically enhanced continental air masses from Siberia/Eurasia arrive at the sites. The O₃ concentrations in the “regionally polluted” continental outflow among sites are as high as 41–46 ppb in winter and 54–61 ppb in spring. Meanwhile, marine air masses from the Pacific Ocean show as low as 13–14 ppb of O₃ at Okinawa and Ogasawara in summer but higher O₃ concentrations, 24–27 ppb, are observed at Oki and Rishiri due to the additional pollution mainly from Japan mainland. The preliminary analysis of the exceedances of ozone critical level using AOT40 and SUM06 exposure indices indicates that the O₃ threshold were exceeded variously among sites and years. The highest AOT40 and SUM06 were observed at Oki in central Japan where the critical levels are distinctly exceeded. In the other years, the O₃ exposures at Oki, Okinawa, and Rishiri are about or slightly higher than the critical levels. The potential risk of crop yields reduction from high level of O₃ exposure in Japan might not be a serious issue during 1990s and at present because the traditional growing season in Japan are during the low O₃ period in summer. However, increases of anthropogenic emission in East Asia could aggravate the situation in the very near future.     

Trace gas variations at Cape Point,South Africa,during May 1997 following a regional biomass burning episode

During the continuous monitoring of atmospheric parameters at the station Cape Point (34°S, 18°E), a smoke plume originating from a controlled fire of 30-yr-old fynbos was observed on 6 May 1997. For this episode, which was associated with a nocturnal inversion and offshore airflow, atmospheric parameters (solar radiation and meteorological data) were considered and the levels of various trace gases compared with those measured at Cape Point in maritime air. Concentration maxima in the morning of 6 May for CO₂, CO, CH₄ and O₃ amounted to 370.3 ppm, 491 ppb, 1730 ppb and 47 ppb, respectively, whilst the mixing ratios of several halocarbons (F-11, F-12, F-113, CCl₄ and CH₃CCl₃) remained at background levels. In the case of CO, the maritime background level for this period was exceeded by a factor of 9.8. Differences in ozone levels of up to 5 ppb between air intakes at 4 and 30 m above the station (located at 230 m above sea level) indicated stratification of the air advected to Cape Point during the plume event. Aerosols within the smoke plume caused the signal of global solar radiation and UV–A to be attenuated from 52.4 to 13.0 mW cm⁻² and from 2.3 to 1.3 mW cm⁻², respectively, 5 h after the trace gases had reached their maxima. Emission ratios (ERs) calculated for CO and CH₄ relative to CO₂ mixing ratios amounted to 0.042 and 0.0040, respectively, representing one of the first results for fires involving fynbos. The CO ER is somewhat lower than those given in the literature for African savanna fires (average ER=0.048), whilst for CH₄ the ER falls within the range of ERs reported for the flaming (0.0030) and smouldering phases (0.0055) of savanna fires. Non-methane hydrocarbon (NMHC) data obtained from a grab sample collected during the plume event were compared to background levels. The highest ERs (ΔNMHC/ΔCH₄) have been obtained for the C₂–C₃ hydrocarbons (e.g. ethene at 229.3 ppt ppb⁻¹), whilst the C₄–C₇ hydrocarbons were characterised by the lowest ERs (e.g. n-hexane at 1.0 and n-pentane at 0.8 ppt ppb⁻¹).