Nonideal transport of contaminants in heterogeneous porous media: 10. Impact of co-solutes on sorption by porous media with low organic-carbon contents

The impact of co-solutes on sorption of tetrachloroethene (PCE) by two porous media with low organic-carbon contents was examined by conducting batch experiments. The two media (Borden and Eustis) have similar physical properties, but significantly different organic-carbon (OC) contents. Sorption of PCE was nonlinear for both media, and well-described by the Freundlich equation. For the Borden aquifer material (OC = 0.03%), the isotherms measured with a suite of co-solutes present (1,2-dichlorobenzene, bromoform, carbon tetrachloride, and hexachloroethane) were identical to the isotherms measured for PCE alone. These results indicate that there was no measurable impact of the co-solutes on PCE sorption for this system. In contrast to the Borden results, there was a measurable reduction in sorption of PCE by the Eustis soil (OC = 0.38%) in the presence of the co-solutes. The organic-carbon fractions of both media contain hard-carbon components, which have been associated with the manifestation of nonideal sorption phenomena. The disparity in results observed for the two media may relate to relative differences in the magnitude and geochemical nature of these hard-carbon components.     

Sorption of As,Cd and Tl as influenced by industrial by-products applied to an acidic soil: Equilibrium and kinetic experiments

In situ stabilization of toxic elements in contaminated soils by the addition of amendments is being considered as an effective technique for remediation. In this paper, we performed both kinetics and equilibrium-based sorption experiments of three toxic elements (As, Cd and Tl) in soils amended with two by-products (phosphogypsum and sugar foam, rich in gypsum and calcium carbonate, respectively) to ascertain the feasibility of their application for improving the sorption capacity of As, Cd and Tl from the soil at 25, 35 and 50 °C. Kinetic studies indicated that the sorption follows a pseudo-second-order (PSO) kinetics and the sorption is a two-step diffusion process where both film and intraparticle diffusion played important roles in the sorption mechanisms of the elements. The Langmuir isotherms applied for sorption studies showed that the estimated maximum sorption capacity of the elements in control and amended soils decreased in the order of Cd > As > Tl. Using the thermodynamic equilibrium parameters obtained at different temperatures, the thermodynamic constants of sorption (ΔG, ΔH and ΔS) were also evaluated, indicating spontaneous and endothermic nature of the process, except Tl which was exothermic. An optimal scaling procedure was undertaken to determine the relationships between the kinetic and equilibrium sorption parameters. By means of statistical analysis it was seen that these inter-parametric relationships are dependent on the element nature.     

Sorption of perfluorooctane sulfonate to carbon nanotubes in aquatic sediments

To date, sorption of organic compounds to nanomaterials has mainly been studied for the nanomaterial in its pristine state. However, sorption may be different when nanomaterials are buried in sediments. Here, we studied sorption of Perfluorooctane sulfonate (PFOS) to sediment and to sediment with 4% multiwalled carbon nanotubes (MWCNTs), as a function of factors affecting PFOS sorption; aqueous concentration, pH and Ca²⁺ concentration. Sorption to MWCNT in the sediment–MWCNT mixtures was assessed by subtracting the contribution of PFOS sorption to sediment-only from PFOS sorption to the total sediment–MWCNT mixture. PFOS Log K_D values ranged 0.52–1.62 L kg^?1 for sediment and 1.91–2.90 L kg^?1 for MWCNT present in the sediment. The latter values are relatively low, which is attributed to fouling of MWCNT by sediment organic matter. PFOS sorption was near-linear for sediment (Freundlich exponent of 0.92 ± 0.063) but non-linear for MWCNT (Freundlich exponent of 0.66 ± 0.03). Consequently, the impact of MWCNT on sorption in the mixture was larger at low PFOS aqueous concentration. Effects of pH and Ca²⁺ on PFOS sorption to MWCNT were statistically significant. We conclude that MWCNT fouling and PFOS concentration dependency are important factors affecting PFOS–MWCNT interactions in sediments.     

Sorption of sulfadiazine on Brazilian soils

Antimicrobials, among them sulfonamides are widely used in veterinary medicine and can contaminate the environment. The degree to which antimicrobials adsorb onto soil particles varies widely, as does the mobility of these drugs. Sulfadiazine (SDZ) was used to study the adsorption–desorption in Brazilian soil–water systems, using batch equilibrium experiments. Sorption of SDZ was carried out using four types of soils. Adsorption and desorption data were well fitted with Freundlich isotherms in log form (r > 0.999) and (0.984 < r < 0.999), respectively. An adsorption–desorption hysteresis phenomenon was apparent in all soils ranging from 0.517 to 0.827. The experimental results indicate that the Freundlich sorption coefficient (K_F) values for SDZ ranged from 0.45 to 2.6 μg^1?1/n (cm³)^1/n g^?1.     

Effect of humic acids on physicochemical property and Cd(II) sorption of multiwalled carbon nanotubes

Carbon nanotubes (CNTs), as a type of superior adsorbents for both organic and inorganic contaminants, are increasingly introduced into the environment. Ubiquitous natural organic matter (NOM) would coat on the released CNTs and change their physicochemical properties and sorption of contaminants. The effects of four sequentially extracted humic acids (HAs, as a model NOM) from a peat soil on the physicochemical properties and Cd(II) sorption of three multiwalled CNTs (MWNTs) with different surface areas were investigated. The MWNTs as purchased with very few oxygen-containing functional groups had relatively low sorption capacities (0.93–1.49 mg g⁻¹) for Cd(II) and the sorption capacity increased with increasing surface area of the MWNTs. Surface-coating with the HAs lowered surface areas of the MWNTs but greatly increased their sorption capacities (5.42–18.4 mg g⁻¹). The MWNT-bound HAs introduced oxygen-containing functional groups and negative charges to the MWNT surfaces, which could thus increase the apparent sorption of Cd(II) through chemical complexation and electrostatic attraction, respectively. The later-extracted HAs with lower polarity were more favorable for the surface-coating but increased less Cd(II) sorption by the MWNTs. The results are expected to shed light on understanding the underlying mechanism of the effect of NOM on the sorption of heavy metal ions by CNTs.     

Bioaccumulation of polybrominated diphenyl ethers in harbor seals from the northwest Atlantic

Polybrominated diphenyl ethers (PBDEs) were analyzed in blubber of harbor seals (Phoca vitulina concolor) collected between 1991 and 2005 along the northwest Atlantic. ∑PBDE concentrations (mono- to hexa-BDEs) detected in blubber samples (n = 42) ranged from 80 to 25 720 ng g⁻¹ lw, (overall mean 2403 ± 5406 ng g⁻¹ lw). By age, mean ∑PBDE concentrations were: 3645 ± 7388, 2945 ± 5995, 1385 ± 1265, and 326 ± 193 ng g⁻¹ lw in pups, yearlings, adult males, and adult females, respectively. Unlike the trend for PCBs, no decreasing gradient from urban to rural/remote areas was observed for PBDEs in these samples, likely reflecting inputs from local sources. No significant temporal trend was observed for PBDEs in harbor seals between 1991 and 2005, although congener profiles shifted over time. Tetra-BDE-47 was the dominant congener, followed by BDEs-99, -100, -153, -154, and -155 in varying order, suggesting exposure to the penta-BDE product. In adult males, the hexa-BDEs contributed more to the total (22%) than BDEs-99 and -100 (14%), and concentrations of BDE-155 were elevated compared with -154. Higher BDEs were detected in a subset of seals (n = 12) including hepta-BDE-183, the marker for the octa-BDE mixture, and octa-BDE-197, along with several unidentified hepta- and octa- congeners. BDE-209 was detected in seal blubber at concentrations ranging from 1.1 to 8 ng g⁻¹ lw, indicating that deca-BDE is bioavailable in this marine food web. This is the first study to document the accumulation of BDE-209 at measurable levels in wild harbor seals. While the PBDE patterns in blubber indicate exposure to all three BDE commercial mixtures, the data also suggest that BDE-209 debromination by seal prey fish may contribute to the loading of lower brominated congeners (hexa- to octa-BDEs) in these seals.     

Influence of competing inorganic cations on the ion exchange equilibrium of the monovalent organic cation metoprolol on natural sediment

The aim of this study was to systematically investigate the influence of the mono- and divalent inorganic ions Na⁺ and Ca²⁺ on the sorption behavior of the monovalent organic cation metoprolol on a natural sandy sediment at pH = 7. Isotherms for the beta-blocker metoprolol were obtained by sediment–water batch tests over a wide concentration range (1–100 000 μg L^?1). Concentrations of the competing inorganic ions were varied within freshwater relevant ranges. Data fitted well with the Freundlich sorption model and resulted in very similar Freundlich exponents (n = 0.9), indicating slightly non-linear behavior. Results show that the influence of Ca²⁺ compared to Na⁺ is more pronounced. A logarithmic correlation between the Freundlich coefficient K_Fr and the concentration or activity of the competing inorganic ions was found allowing the prediction of metoprolol sorption on the investigated sediment at different electrolyte concentrations. Additionally, the organic carbon of the sediment was completely removed for investigating the influence of organic matter on the sorption of metoprolol. The comparison between the experiments with and without organic carbon removal revealed no significant contribution of the organic carbon fraction (0.1%) to the sorption of metoprolol on the in this study investigated sediment. Results of this study will contribute to the development of predictive models for the transport of organic cations in the subsurface.     

Metal mobilization in soil by two structurally defined polyphenols

Polyphenols including tannins comprise a large percentage of plant detritus such as leaf litter, and affect soil processes including metal dynamics. We tested the effects of tannins on soil metal mobilization by determining the binding stoichiometries of two model polyphenols to Al(III) and Fe(III) using micelle-mediated separation and inductively coupled plasma optical emission spectroscopy (ICP-OES). By fitting the data to the Langmuir model we found the higher molecular weight polyphenol (oenothein B) was able to bind more metal than the smaller polyphenol (epigallocatechin gallate, EGCg). For example, oenothein B bound 9.43 mol Fe mol^?1, while EGCg bound 4.41 mol of Fe mol^?1. Using the parameters from the binding model, we applied the Langmuir model for competitive binding to predict binding for mixtures of Al(III) and Fe(III). Using the parameters from the single metal experiments and information about polyphenol sorption to soils we built a model to predict metal mobilization from soils amended with polyphenols. We tested the model with three natural soils and found that it predicted mobilization of Fe and Al with r² = 0.92 and r² = 0.88, respectively. The amount of metal that was mobilized was directly proportional to the maximum amount of metal bound to the polyphenol. The secondary parameter in each model was the amount of weak organically chelated Fe or Al that was in the soil. This study provides the first compound-specific information about how natural polyphenols interact with metals in the environment. We propose a model that is applicable to developing phytochelation agents for metal detoxification, and we discuss how tannins may play a role in metal mobilization from soils.     

Henry’s law constant measurements for formaldehyde and benzaldehyde as a function of temperature and water composition

Henry’s law constants H of formaldehyde and benzaldehyde were determined using a dynamic system based on the water/air equilibrium at the interface within the length of a microporous tube. The measurements were conducted over the range 273–293 K in (i) deionized water, (ii) 35 g L^?1 solution of NaCl simulating seawater and (iii) two nitric acid solutions, i.e. 0.63 and 6.3 wt%.In pure water, the obtained data were used to derive the following Arrhenius expressions: ln H = (6423 ± 542)/T ? (13.4 ± 2.0) and ln H = (6258 ± 280)/T ? (17.5 ± 1.0) for formaldehyde and benzaldehyde, respectively. The H values, calculated at 293 K from Arrhenius expressions cited above were the following (in units of M atm^?1): H = 5020 ± 1170 (formaldehyde), H = 47 ± 5 (benzaldehyde). The temperature dependence of H permits then to derive the solvation enthalpies for both compounds: ΔH_solv = ?(53.4 ± 4.5) kJ mol^?1 and ΔH_solv = ?(52.0 ± 2.3) kJ mol^?1 for formaldehyde and benzaldehyde, respectively.In 35 g L^?1 salt solution, the H values were 27–66% and 12–21% lower than their respective determinations in deionized water, for formaldehyde and benzaldehyde respectively. The observed salt effect was used to estimate the following Setschenow coefficients at 293 K for 0.6 M NaCl: formaldehyde (0.21) and benzaldehyde (0.09).In 6.3 wt% nitric acid solution, H values of benzaldehyde were approximately 30% higher than those found in pure water although no significant influence was observed for formaldehyde.Finally, our experimental data were then used to estimate the fractions of formaldehyde and benzaldehyde in atmospheric aqueous phase and their derived atmospheric lifetimes.     

Optical and microphysical properties of severe haze and smoke aerosol measured by integrated remote sensing techniques in Gwangju,Korea

Aerosol optical and microphysical parameters from severe haze events observed in October 2005 at Gwangju, Korea (35.10°N, 126.53°E) were determined from the ground using a multi-wavelength Raman lidar, a sunphotometer, and a real-time carbon particle analyzer and from space using satellite retrievals. Two different aerosol types were identified based on the variability of optical characteristics for different air mass conditions. Retrievals of microphysical properties of the haze from the Raman lidar indicated distinct light-absorbing characteristics for different haze aerosols originating from eastern and northern China (haze) and eastern Siberia (forest-fire smoke). The haze transported from the west showed moderately higher absorbing characteristics (SSA = 0.90 ± 0.03, 532 nm) than from the northern direction (SSA = 0.96 ± 0.02). The organic/elemental carbon (OC/EC) ratio varied between 2.5 ± 0.4 and 4.1 ± 0.7.     

Exposure to cadmium in male urban and rural workers and effects on FSH,LH and testosterone

ObjectiveThis cross-sectional study was conducted to assess the relationship between exposure to cadmium and circulating reproductive hormone levels in urban and rural male workers.Materials and MethodsUrinary cadmium, blood cadmium, luteinizing hormone (LH), follicle stimulating hormone (FSH) and testosterone were obtained from 86 non-smoking traffic policemen and 86 subjects working as roadmen in a rural area. All subjects were monitored to evaluate airborne exposure to cadmium.ResultsThe mean value of exposure to cadmium was 1.3 ng m^?3 in traffic policemen, while the mean value was less than 0.5 ng m^?3 in roadmen. The mean concentrations of urinary cadmium (1.4 vs. 0.9 μg g^?1 creatinine; p = 0.001), blood cadmium (1.1 vs. 0.7 μg l^?1; p = 0.000), FSH (2.6 vs. 3.2 μlU ml^?1; p = 0.02) and LH (2.6 vs. 3.1 μlU ml^?1; p = 0.03) were significantly different between traffic policemen and roadmen. No differences were found in the mean values of testosterone between the two groups. Multiple linear regression models showed associations between (a) urinary cadmium, airborne cadmium, working life, job category and consumption of water from water supply (b) blood cadmium, airborne cadmium and job category (c) the values of FSH and age, working life, job category, urinary cadmium and blood cadmium (d) the values of LH and both the age and working life.ConclusionThe above results must be confirmed by further studies, but they indicate the influence of exposure to the cadmium present in urban air on the circulating FSH, even at low doses.     

Tropospheric concentrations of the chlorinated solvents,tetrachloroethene and trichloroethene,measured in the remote northern hemisphere

A fully automated twin ECD gas chromatograph system with sample enriching adsorption–desorption primary stage was deployed on two field campaigns – Ny-Ålesund, Svalbard, Arctic Norway (July–September 1997), and the RRS Discovery CHAOS cruise of the northeast Atlantic (April–May 1998). Concentrations of an extensive set of halocarbons were detected at hourly intervals at pptv levels. We present here the results obtained for the chlorinated solvents, tetrachloroethene (PCE) and trichloroethene (TCE). Average baseline PCE and TCE concentrations of 1.77 and 0.12 pptv, respectively, were recorded in Ny-Ålesund. During pollution incidences, concentrations rose to 5.61 (PCE) and 3.18 pptv (TCE). The cruise data showed average concentrations ranging from 4.26 (PCE) and 1.66 pptv (TCE) for air masses originating over the North Atlantic and Arctic open oceans, to maxima of 15.59 (PCE) and 17.51 pptv (TCE) for polluted air masses from Northern Europe. The data sets emphasise the difficulties in defining remote sites for background tropospheric halocarbon measurements, as Ny-Ålesund research station proved to be a source of tetrachloroethene. The data also suggest possible oceanic emissions of trichloroethene in the sub-tropical ocean.     

Determination of priority pesticides in water samples combining SPE and SPME coupled to GC–MS. A case study: Suquía River basin (Argentina)

This study reports a combined method using solid phase extraction (SPE), followed by solid phase microextraction (SPME) to concentrate different pesticides, including chlorinated, organophosphorus, triazines, pyretroids and chloroacetamides, present at trace levels in water samples. Identification and quantification was carried out by gas chromatography coupled to Mass Spectrometry (GC–MS). The optimized methodology showed LOQs at ng L^?1 levels (ranging 0.2–3.5 ng L^?1) in addition to acceptable precision and robustness (recoveries ranged 63–104%, RSD from 4% to 23%), presenting a novel method to reach trace levels, similar to that obtainable using EC detector, with structural confirmation by MS during the analysis of a wide range of environmental pollutants.This method was applied to the study of temporal and spatial distribution of pesticides in the Suquía River basin (Córdoba-Argentina). As expected, highest levels of agrochemicals were observed in areas with intensive agricultural practices, being atrazine (max. = 433.9 ng L^?1), alpha-cypermetrine (max. = 121.7 ng L^?1) and endosulfan sulfate (max. = 106.7 ng L^?1) predominant. In urban areas, the prevalent pesticide was alpha-cypermethrine. These results draw attention to the need of pesticide monitoring programs in rivers, considering both urban and rural sections.     

Triclosan in individual human milk samples from Australia

Triclosan is a chlorinated phenol ether that has been in widespread use as a broad-spectrum antibacterial agent for four decades. When compared to the limited international data available on human body burden of triclosan, results from a pooled blood study suggested that triclosan concentrations in Australia were a factor two higher than observed in Sweden. This study determined triclosan levels in individual human milk samples (n = 151) collected between 2002 and 2005 from primiparous Australian mothers. It provided the first report of population triclosan levels and individual variation in Australia and gave a measure of infant exposure via breast feeding. The distribution of triclosan concentration was positively skewed, with 7.2% of the samples below the LOQ, 66% with a concentration of less than or equal to 1.0 ng g⁻¹ fresh weight and the remaining samples above 1 ng g⁻¹ reaching a maximum concentration of 19 ng g⁻¹ fresh weight. The mean and median triclosan concentrations were 1.3 ± 2.7 ng g⁻¹ f.w. and 0.26 ng g⁻¹ f.w., respectively. The results of this study showed high variability in triclosan concentrations between individuals and no correlations with maternal age (p = 0.094), maternal weight (p = 0.971) or infant age at the time of sample collection (p = 0.621). A large number of samples contained low or non-quantifiable concentrations of triclosan and so, in Australia, ubiquitous background exposure due to environmental sources is low. This means that body burden can be influenced by an individual’s use of triclosan containing product. Given that triclosan containing product use is continuing, it is important that monitoring in both humans and the environment is continued and that triclosan containing products are adequately labeled so that an individual can choose to avoid exposure.     

Sorption of polar and nonpolar organic contaminants by oil-contaminated soil

Sorption of nonpolar (phenanthrene and butylate) and polar (atrazine and diuron) organic chemicals to oil-contaminated soil was examined to investigate oil effects on sorption of organic chemicals and to derive oil–water distribution coefficients (K_oil). The resulting oil-contaminated soil–water distribution coefficients (K_d) for phenanthrene demonstrated sorption-enhancing effects at both lower and higher oil concentrations (C_oil) but sorption-reducing (competitive) effects at intermediate C_oil (approximately 1 g kg⁻¹). Rationalization of the different dominant effects was attempted in terms of the relative aliphatic carbon content which determines the accessibility of the aromatic cores to phenanthrene. Little or no competitive effect occurred for butylate because its sorption was dominated by partitioning. For atrazine and diuron, the changes in K_d at C_oil above approximately 1 g kg⁻¹ were negligible, indicating that the presently investigated oil has little or no effect on the two tested compounds even though the polarity of the oil is much less than soil organic matter (SOM). Therefore, specific interactions with the active groups (aromatic and polar domains) are dominantly responsible for the sorption of polar sorbates, and thus their sorption is controlled by available sorption sites. This study showed that the oil has the potential to be a dominant sorptive phase for nonpolar pollutants when compared to SOM, but hardly so for polar compounds. The results may aid in a better understanding of the role of the aliphatic and aromatic domains in sorption of nonpolar and polar organic pollutants.     

Temporal variations of atmospheric carbonyls in urban ambient air and street canyons of a Mountainous city in Southwest China

Carbonyl compounds in urban ambient air and street canyons were measured from December 2008 to August 2009 in a mountainous city in southwest China (Guiyang). The formaldehyde yield from the photo-oxidation of isoprene emitted by vegetation was estimated to be in the range of 0.63–3.62 μg m^?3 from May to August, which accounted for 28.8–33.4% of ambient formaldehyde. Based on the calculation of photolysis rates and rates of reaction with the OH radical, it was found that photolysis was the predominant sink for formaldehyde and acetone in both summer and winter. For acetaldehyde, photo-oxidation by OH radicals and photolysis were the major sinks in summer while photo-oxidation by OH radicals was the dominant sink in winter. Wet precipitation was found to be an important removal process for the atmospheric carbonyls. In the urban ambient air, the average concentrations of formaldehyde, acetaldehyde, acetone and all carbonyls were 4.8 ± 2.1, 5.7 ± 3.3, 5.1 ± 2.5, and 25.1 ± 9.2 μg m^?3 (n = 139), respectively. The average concentrations of these species in street canyons were 18.8 ± 6.5, 9.4 ± 3.2, 10.9 ± 2.1, and 64.1 ± 16.3 μg m^?3 (n = 62), respectively. The significantly higher carbonyl levels on weekdays (compared to weekends) highlight the contribution of vehicle emissions to carbonyls in the street canyons.     

Source apportionment of primary and secondary organic aerosols using positive matrix factorization (PMF) of molecular markers

Monthly average ambient concentrations of more than eighty particle-phase organic compounds, as well as total organic carbon (OC) and elemental carbon (EC), were measured from March 2004 through February 2005 in five cities in the Midwestern United States. A multi-variant source apportionment receptor model, positive matrix factorization (PMF), was applied to explore the average source contributions to the five sampling sites using molecular markers for primary and secondary organic aerosols (POA, SOA). Using the molecular makers in the model, POA and SOA were estimated for each month at each site. Three POA factors were derived, which were dominated by primary molecular markers such as EC, hopanes, steranes, and polycyclic aromatic hydrocarbons (PAHs), and which represented the following POA sources: urban primary sources, mobile sources, and other combustion sources. The three POA sources accounted for 57% of total average ambient OC. Three factors, characterized by the presence of reaction products of isoprene, α-pinene and β-caryophyllene, and displaying distinct seasonal trends, were consistent with the characteristics of SOA. The SOA factors made up 43% of the total average measured OC. The PMF-derived results are in good agreement with estimated SOA concentrations obtained from SOA to tracer yield estimates obtained from smog chamber experiments. A linear regression comparing the smog chamber yield estimates and the PMF SOA contributions had a regression slope of 1.01 ± 0.07 and an intercept of 0.19 ± 0.10 μg OC m^?3 (adjusted R² of 0.763, n = 58).     

Heterogeneous reactivity of pyrene and 1-nitropyrene with NO2: Kinetics,product yields and mechanism

The heterogeneous reactivity of nitrogen dioxide with pyrene and 1-nitropyrene (1NP) adsorbed on silica particles has been investigated using a fast-flow-tube in the absence of light. Reactants and products were extracted from particles using pressurised fluid extraction (PFE) and concentration measurements were performed using gas chromatography/mass spectrometry (GC/MS). The pseudo-first order rate constants were obtained from the fit of the experimental decay of particulate polycyclic compound concentrations versus reaction time. Experiments were performed at three different NO₂ concentrations and second order rate constants were calculated considering the oxidant concentration. The following rate constant values were obtained at room temperature: k(NO₂ + pyrene) = (9.3 ± 2.3) × 10^?17 cm³ molecule^?1 s^?1 and k(NO₂ + 1NP) = (6.2 ± 1.5) × 10^?18 cm³ molecule^?1 s^?1, showing that the reactivity of 1NP was slower by a factor of 15 than that of pyrene. 1NP was identified as the only NO₂-initiated oxidation product of pyrene and all the three dinitropyrenes were identified in the case of the 1NP reaction. The product quantification allowed showing that the kinetics of oxidation product formation was equal to that measured for parent compounds degradation, within uncertainties, confirming the validity of the reaction kinetics measurements.     

A highly resolved anion-exchange chromatographic method for determination of saccharidic tracers for biomass combustion and primary bio-particles in atmospheric aerosol

An improved high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD) method is developed and validated for simultaneous determination of atmospherically relevant sugar alcohols, monosaccharides, and monosaccharide anhydrides. The improved method enables the separation of levoglucosan and arabitol which were not or insufficiently separated by the previous HPAEC–PAD methods. Reproducibility of the method was tested for both standard solutions and atmospheric aerosol samples. The peak area relative standard deviation (RSD%) of standard solutions were found to be lower than 1.5% for consecutive analyses (n = 3) and lower than 4% for day to day variation (n = 9). The peak area RSD% of atmospheric samples with typical European wintertime monosaccharide concentrations (n = 9) was found to be similar to that of standard solutions. Limits of detection ranged from 0.002 mg L^?1 for inositol to 0.08 mg L^?1 for fructose. The developed method offers a simple, reliable and cost effective determination of atmospheric tracers for biomass combustion and for selected bio-aerosol components at sub-nanogram per cubic-meter-air concentration levels for routine analysis.     

Concentrations of perfluoroalkyl compounds in maternal and umbilical cord sera and birth outcomes in Korea

This study analyzed the concentrations of perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA) and perfluorohexane sulfonate (PFHxS) in maternal and umbilical cord sera at delivery from the general population in Korea. Seventy samples were analyzed with ion-pairing and LC/MS/MS. PFOS, PFOA and PFHxS were detected in both maternal and umbilical cord sera. There was a high correlation of PFC concentrations between maternal and cord serum samples, implying transplacental transport. Ranking of transplacental transfer efficiency was PFOA > PFHxS > PFOS. Student’s t-tests revealed that concentrations of maternal PFOA were related with decreases in birth weight, birth length and ponderal index, suggesting a possible impact on fetal growth. With multiple logistic regression models, maternal PFOS concentration showed a significant inverse association with ponderal index (OR = 0.22; 95% CI, 0.05–0.90). Umbilical cord PFHxS concentration showed a significant inverse association with birth weight (OR = 0.26; 95% CI, 0.08–0.85) or a marginally significant inverse association with birth length (OR = 0.33; 95% CI, 0.09–1.17). This is the first report demonstrating an inverse association of birth outcomes with PFHxS exposure. Concentrations of maternal PFOA were decreased with parity, implying that delivery is one of the major routes for PFOA elimination in women. This study demonstrated prenatal exposure of PFCs through placental transfer which could result in possible developmental effects in the population sampled. Our results may provide data basis to conduct a larger scale investigation into developmental effects of PFCs in the future and contribute to understanding levels of PFC contaminations from a variety of populations in the globe.