专利文摘

<正> 与印染废水结合的脱硫工艺该发明公开了一种与印染废水结合的脱硫工艺,利用电石渣、石灰或石灰石作为脱硫剂对烟气进行湿法脱硫,利用脱硫剂配制脱硫浆液的化浆过程用水采用印染废水;脱硫浆液中固体的质量分数为8%～15%,脱硫系统的pH为5.2～6.0,液气流量比为8～12 L/m~3。该发明的脱硫工艺以电石渣和印染废水的混合浆液作为脱硫剂对烟气进行湿法处理,大量减少了印染废水的排放量,对COD在10 000 mg/L以上的高浓度废水的COD去除率在80%以上,色度去除率在90%以上,废水水量排放减少30%以上。/CN101816889A,2010-09-01     

用白泥和赤泥制备烟气脱硫剂

以碱厂白泥和钢厂赤泥为主要原料,研究了制备复合金属氧化物成型烟气脱硫剂的工艺;考察了m（白泥）：m（赤泥）、白泥和赤泥平均粒径、黏结剂、造孔剂对脱硫剂活性的影响。脱硫剂最佳制备工艺条件为m（白泥）：m（赤泥）=2：1,白泥和赤泥粒径越小越好,黏结剂为Na,造孔剂为Zb,加水混匀,挤条成型,烘干后高温焙烧制得;脱硫剂的最高脱硫率为99．83％,脱硫剂脱硫12．30h后穿透硫容为15．20％。     

撞击流气液反应器氨吸收法去除烟气中的SO2

以氨水为吸收剂，在撞击流气液反应器中进行了燃煤烟气脱硫实验。考察了吸收液体积（L）与SO2体积（m^3）之比（液气比）、烟气中SO2浓度、烟气流速和氨与硫摩尔比对脱硫率的影响。在液气比为0．52L／m^3、氨与硫摩尔比为1．3、烟气流速为6．3m／s、烟气中SO2质量浓度为2800mg／m^3时，脱硫率达96．08％；建立了液气比、烟气中SO2质量浓度、烟气流速和氨与硫摩尔比与脱硫率的数学关系式。     

旋流板塔脱硫技术的应用和经济分析

叙述了旋流板塔在湿式烟气脱硫除尘中的应用。运行实践表明,石灰湿式脱硫液气比为1．24～1．26．钙硫比为0．73～0．75时,脱硫率可达87．7％～91．6％,除尘效率达99％以上。脱除SO2成本为983元／t。烟气再热能耗仅占运行费用的19％。     

菱镁矿浮选尾矿浆液的烟气脱硫性能

以菱镁矿浮选尾矿浆液为烟气脱硫剂,采用湿法烟气脱硫技术,对模拟烟气进行脱硫研究。实验结果表明：在脱硫剂浆液质量分数10%、脱硫剂浆液温度60 ℃、脱硫时间10 min时,脱硫剂浆液的脱硫率为85%;向脱硫剂浆液中添加柠檬酸和乙二酸时均有助于提高脱硫率,当有机酸的浓度3.5 mmol/L时,添加柠檬酸的脱硫剂浆液的脱硫率为96%,添加乙二酸的脱硫剂浆液的脱硫率为90%。     

一种简易成熟的烟气脱硫方法

山东潍坊亚星集团有限公司(简称潍坊亚星)所属化工集团是以氯产品为主的化工企业，其25kt规模的PVC生产工艺为乙炔法，每年产生40kt(干基)电石渣。1993年由国家计委牵头，中日双方签署“燃煤锅炉烟气简易脱硫示范装置“合作协议，日方三菱重工业株式会社、川崎重工业株式会社和千代田化工建设株式会社分别与中方山东潍坊亚星集团、广西南宁化工集团和重庆长寿化工总厂合作，采用简易石灰石-石膏法进行燃煤锅炉烟气脱硫，脱硫剂为乙炔法生产PVC过程产生的电石渣。其     

用动力波逆向喷射洗涤器脱除烟气中的二氧化硫

介绍了动力波逆向喷射洗涤器的构造及基本原理,并将这一新型洗涤技术应用于烟气脱硫。讨论了各种因素对采用石灰水作为洗涤液时的烟气脱硫率的影响,在pH为9．2、液气比为0．024条件下,脱硫率可达到90％。     

菱镁矿浮选尾矿浆液的烟气脱硫性能

以菱镁矿浮选尾矿浆液为烟气脱硫剂,采用湿法烟气脱硫技术,对模拟烟气进行脱硫研究。实验结果表明:在脱硫剂浆液质量分数10%、脱硫剂浆液温度60℃、脱硫时间10 min时,脱硫剂浆液的脱硫率为85%;向脱硫剂浆液中添加柠檬酸和乙二酸时均有助于提高脱硫率,当有机酸的浓度3.5 mmol/L时,添加柠檬酸的脱硫剂浆液的脱硫率为96%,添加乙二酸的脱硫剂浆液的脱硫率为90%。     

一种简易成熟的烟气脱硫方法

山东潍坊亚星集团有限公司 (简称潍坊亚星 )所属化工集团是以氯产品为主的化工企业 ,其中 2 5ｋｔ规模的ＰＶＣ生产工艺为乙炔法 ,每年产生 4 0ｋｔ(干基 )电石渣。 1993年由国家计委牵头 ,中日双方签署“燃煤锅炉烟气简易脱硫示范装置”合作协议 ,日方三菱重工业株式会社、川崎重工业株式会社和千代田化工建设株式会社分别与中方山东潍坊亚星集团、广西南宁化工集团和重庆长寿化工总厂合作 ,采用简易石灰石 石膏法进行燃煤锅炉烟气脱硫 ,脱硫剂为乙炔法生产ＰＶＣ过程产生的电石渣。其中潍坊亚星脱硫装置于 1995年建成投产后 ,不仅一直正…     

稀土氧化物催化还原烟气中的SO2

在实验室研究结果的基础上，建立了小型实际燃煤烟气脱硫试验装置，采用实际燃煤烟气进行了稀土氧化物催化还原烟气脱硫的试验，考察了空速、反应温度对脱硫率的影响。试验结果表明，在反应温度520～550℃、空速2800h。的条件下，脱硫率为99％，NOx的去除率为95％，SO2最高排放质量浓度为100mg／m^3，NOx最高排放质量浓度为50mg／m^3，符合GB13223-2003《火电厂大气污染物排放标准》2时段标准，与实验室的实验结果基本吻合。     

Distribution of Cd,Ck, Pb and Zn in Soil and Vegetation Compartments in Stands of Five Boreal Tree Species in N.E. Sweden

Concentrations and total quantity of cadmium (Cd), cupper (Cu),lead (Pb) and zink (Zn) were determined in biomass and soil compartments in a replicated tree species experiment with 27-yr-old stands growing on former farmland in N.E. Sweden. Sequentialextractions of soil samples were performed in order to estimate the exchangeable and an organically bound fraction of each element. The tree species included were Picea abies (L.)H. Karst., Pinus sylvestris L., Pinus contorta Dougl., Larix sibirica Ledeb., and Betula pendula Roth.Tree species influenced the rate of removal of Cu, Pb and Zn incase of stemwood harvesting, and of Cd, Cu and Zn in the case ofwhole-tree harvesting. B. pendula and P. abies had higher quantities and average concentrations of Zn in the biomass. For all species, >50% of the Zn in the stems was found in the bark. P. abies and L. sibirica had higher quantities of Cu in the biomass than the other species.P. abies and P. contorta had high quantities of Cd inthe biomass in relation to the other species. Branches and stembark contained high concentrations of Cd and Pb in relation to foliage and stemwood. Dead branches had especially high concentrations of Pb. The high accumulation rate of Zn in thebiomass of B. pendula was related to a low exchangeable amount of Zn in the A horizon. In the superficial centimeters ofthe A horizon, a depletion similar to that found for Zn was detected for Cu, whereas for Cd and Pb, no correlations were found between quantities of elements in the trees and element pools in the soil.     

Programs assessing implementation and effectiveness of state forest practice rules and BMPs in the West

The major forest nonpoint source control programs in the West are largely regulatory, either under forest practices acts (California, Idaho, New Mexico, Nevada, Oregon, and Washington) or a streamside management act (Montana). These programs and the specific rules they enforce continue to undergo intensive scrutiny. Still, the questions are the same for these regulatory programs as for states that base nonpoint source control on voluntary BMPs (Arizona, Colorado, Utah, Wyoming). Are the rules or BMPs being applied, and are they effective in reducing nonpoint source pollution to levels that protect beneficial uses of water? The level of debate about forestry in the West has resulted in detailed monitoring and research to answer these questions. In the past, state agencies have assumed levels of BMP compliance based on the percent of operations without enforcement actions. These estimates are being replaced by statistically valid and reproducible monitoring of forest practices rules and BMP compliance levels. BMP effectiveness is being assessed using both qualitative and quantitative methods. This can involve field assessments, process-based research, and control watershed studies. Some trend monitoring is also beginning. With the regional implementation rate for forestry BMPs at about 94% and rising, it is likely that effectiveness testing will continue to be a priority and consume the majority of assessment resources for this region.     

High Immobilization of NH4+ in Danish Heath Soil Related to Succession,Soil and Nutrients: Implications for Critical Loads of N

During recent decades heathlands havechanged into grasslands in regions with high atmosphericnitrogen deposition. In regions with intermediatedeposition level (e.g., Denmark) changes have been lesspronounced which may be due to delay or decrease inresponse of the ecosystem. The mor layer (O horizon) mayplay an important role for this delay due to high sinkstrength for N. In this study, the capacity for netNH₄ ⁺ immobilization and mineralization wasstudied during short- and long-term incubations (2–36 days)of mor samples from Danish dry inland heaths. High short-term capacity for net NH₄ ⁺ immobilization wasfound to be a general characteristic of Danish heath morlayers both under heather (Calluna vulgaris) andcrowberry (Empetrum nigrum ssp nigrum), the latterdominating late stages in heathland succession. The netNH₄ ⁺ immobilization was higher under youngcompared to old or dead vegetation, and higher on lessnutrient poor soils than on extremely nutrient poor soils.The addition of N, P and C stimulated CO₂ productionand net NH₄ ⁺ immobilization, but not net Nmineralization. The immobilization of ¹⁵NH₄ ⁺caused release of dissolved organic N, increased N anddecreased C/N ratio in the microbial biomass, and indicatedgrowth of microorganisms with other metabolic abilitiesthan the indigenous population. No evidence was obtained ofstabilization of immobilized ¹⁵NH₄ ⁺ intosoil organic matter during the experiment. On background ofthe results and current knowledge it was concluded that therecognition of the high capacity for net NH₄ ⁺immobilization in mor layers does not allow for a raiseof critical loads for N for northern dry inland heaths.     

Starch-plastic materials—Preparation,physical properties,and biodegradability (a review of recent USDA research)

Recent starch-plastic research at the National Center for Agricultural Utilization Research is reviewed and related worldwide efforts are noted. Properties of starch that influence its formulation and performance in plastics are discussed. Methods are given for preparation of starch-poly(methyl acrylate) graft copolymer, starch-poly(ethylene-co-acrylic acid), and starch-poly(ethylene-co-acrylic acid)-polyethylene plastics. Their physical properties are discussed, as is degradability by enzymes or amylolytic organisms from soil, ponds, and streams.The mention of firm names or trade products does not imply that they are endorsed or recommended by the U.S. Department of Agriculture over other firms or similar products not mentioned.     

Application of Cellulose Microfibrils in Polymer Nanocomposites

Cellulose microfibrils obtained by the acid hydrolysis of cellulose fibers were added at low concentrations (2–10% w/w) to polymer gels and films as reinforcing agents. Significant changes in mechanical properties, especially maximum load and tensile strength, were obtained for fibrils derived from several cellulosic sources, including cotton, softwood, and bacterial cellulose. For extruded starch plastics, the addition of cotton-derived microfibrils at 10.3% (w/w) concentration increased Young’s modulus by 5-fold relative to a control sample with no cellulose reinforcement. Preliminary data suggests that shear alignment significantly improves tensile strength. Addition of microfibrils does not always change mechanical properties in a predictable direction. Whereas tensile strength and modulus were shown to increase during addition of microfibrils to an extruded starch thermoplastic and a cast latex film, these parameters decreased when microfibrils were added to a starch–pectin blend, implying that complex interactions are involved in the application of these reinforcing agents.     

四氮唑废水处理工艺设计

高浓度、高盐分的四氮唑生产废水通过三效蒸发浓缩,馏出液经铁炭氧微电解和混凝预处理,再采用水解酸化一接触氧化一反应二沉主体组合工艺进行处理。研究了该工艺所需构筑物和设备的设计与选型。该工艺在正常运行条件下,处理后出水pH6～9,COD 302mg／L,BOD5 108mg／L,SS30mg／L,色度36倍,水质达到GB8978--1996（污水综合排放标准》三级标准。     

Hysteresis in Reversal of Central European Mountain Lakes from Atmospheric Acidification

Extremely high emissions of S and N compounds in Central Europe (both 280 mmol m^-2 yr^-1) declined by 70and 35%, respectively, during the last decade. Decreaseddeposition rates of SO₄ ^-2, NO₃ ^-, and NH₄ ⁺ in the region paralleled emission declines. The reduction in atmospheric inputs of S and N to mountain ecosystemshas resulted in a pronounced reversal of acidification in the Tatra Mountains and Bohemian Forest lakes. Between the 1987–1990and 1997–1999 periods, concentrations of SO₄ ^-2 and NO₃ ^- decreased (average ± standard deviation) by 22±7 and 12±7 mol L^-1, respectively, in theTatra Mountains, and by 19±7 and 15±10 mol L^-1, respectively, in the Bohemian Forest. Their decrease was compensated in part (1) by a decrease in Ca²⁺ + Mg²⁺ (17±7 mol L^-1) and H⁺ (4±6 mol L^-1), and an increase in HCO₃ ^-(10±10 mol L^-1) in the Tatra Mountains lakes, and (2) by a decrease in Al (7±4 mol L^-1), Ca²⁺ + Mg²⁺ (9±6 mol L^-1), and H⁺ (6±5 mol L^-1), in Bohemian Forest lakes. Despite the rapid decline in lake water concentrations of SO₄ ^-2 and NO₃ ^- in response to reduced S and N emissions, their present concentrations in some lakes are higher than predictionsbased on observed concentrations at comparable emission rates during development of acidification. This hysteresis in chemical reversal from acidification has delayed biological recovery of the lakes. The only unequivocal sign of biological recovery hasbeen observed in erné Lake (Bohemian Forest) where a cladoceran species Ceriodaphnia quadrangular has recentlyreached its pre-acidification abundance.     

Reconstruction of Long-Term Changes in Lake water Chemistry,Zooplankton and Benthos of a Small,Acidified High-Mountain Lake: Magic Modelling and Palaeolimnogical Analysis

Starolesnianske pleso is a small and shallow acid lake in the High Tatra Mountains, situated at 2000 m above sea level, on granitic bedrock, with sparse and thin soil cover. When detailed measurements began in the 1980s Starolesnianske pleso had pH below 5 and only one species of cladoceran zooplankton, the ubiquitous Chydorus sphaericusPalaeolimnological investigations show changes in cladoceran zooplankton and chironomid zoobenthic assemblages since about 1920 and a major change in 1970–1980. The dynamic acidification model MAGIC was used to reconstruct changes in water chemistry over the past 150 years. The results from MAGIC agree well with the sediment record; pH levels gradually decreased from 6.5 in the mid-1800s to about 5.6 in 1920 (first response in biota) to below 5.0 by 1970, and concentrations of inorganic aluminium rose dramatically beginning about 1960. In the 1990s the lake water chemistry showed clear signs of reversal in acidification brought about by a major decline in S deposition.     

Does Soil Acidification Affect Spruce Needle Chemical Composition and Tree Growth?

In 1994, a large survey of soil chemistry was undertaken in thecounty of Värmland in central Sweden (Lundström et al., 1998).The southern part of the county was affected by soilacidification whereas there were no such indications in thenorthern part. To investigate the influence of soil chemistryon the trees at the specific sites, the survey was continued byan analysis of needle chemistry (Norway spruce) which wasundertaken at 150 of the 180 sites, and of tree growth at 65 ofthe 180 sites. Growth was expressed as a ratio between expectedgrowth, estimated with a national, empirical growth model, andthe growth observed in the field. In statistical analyses,using rank correlation, PCA and PLS, there were only weakindications of an influence of soil chemistry on needlechemistry and on tree growth. A moderate correlation betweennitrogen and sulphur in needles was found, which wasinterpreted as an effect of deposition and of processes in thetree canopy. No obvious regional pattern of the growth ratiowas found, in contrast to the clear pattern of soilacidification. The statistical analysis could not with anycertainty point out any of the soil chemistry variables asespecially important for the tree growth ratio.     

Heavy Metals Removal by Biosorption and Flotation

The removal of a mixture of heavy (toxic) metal cations (copper, nickeland zinc) from liquid effluents was investigated in this study at pilotscale, using counter-current contact mode. The innovative processinvolved the abstraction of metal ions onto fungal biosorbents, followedby the application of flotation for the subsequent solid/liquid separationof biomass particles. The ability of microorganisms to remove metal ionsfrom aqueous solutions is a well-known phenomenon. Nevertheless,engineering considerations are very important in decisions, concerningthe commercial future of biosorption and practical solutions are neededfor certain problems, such as the efficient post-separation ofmetal-loaded biomass. The two processes (flotation and biosorption) caneffectively operate in combination, in what it was termed biosorptiveflotation process. The sorbents may be recycled, after appropriate elutionof metals, as well as the treated (clean) water.