Synthesis of branched para-nonylphenol isomers: occurrence and quantification in two commercial mixtures

Eight tertiary nonanols were synthesized via Grignard reaction and coupled by Friedel–Crafts alkylation with phenol to the corresponding nonylphenols. Six branched para-nonylphenols (NP) were obtained: 4-(3′-methyl-3′-octyl)phenol (33NP), 4-(2′-methyl-2′-octyl)phenol (22NP), 4-(2′,5′-dimethyl-2′-heptyl)phenol (252NP), 4-(2′,5′,5′-trimethyl-2′-hexyl)phenol (2552NP), 4-(2′,4′-dimethyl-2′-heptyl)phenol (242NP) and 4-(4′-ethyl-2′-methyl-2′-hexyl)phenol (4E22NP). Their structures were confirmed by GC–MS and NMR spectroscopy. These six isomers as well as the earlier synthesized 4-(3′,5′-dimethyl-3′-heptyl)phenol (353NP), 4-(3′,6′-dimethyl-3′-heptyl)phenol (363NP) and 4-(2′,6′-dimethyl-2′-heptyl)phenol (262NP) were compared with commercial NP mixtures purchased from Acros and Fluka by GC–MS (equipped with a 100 m polysiloxane column). The analyses revealed that all obtained isomers are occurring in different quantities in both commercial NP mixtures.     

Estrogen equivalent concentration of 13 branched para-nonylphenols in three technical mixtures by isomer-specific determination using their synthetic standards in SIM mode with GC-MS and two new diasteromeric isomers

Thirteen isomers of branched para-nonylphenols (para-NP) in three technical mixtures were isomer-specifically determined using their synthesized standards by SIM of structurally specific ions, m/z 135, 149 or 163 with GC–MS. Of the 13 isomers, four isomers, 4-(2,4-dimethylheptan-4-yl)phenol, 4-(4-methyloctan-4-yl)phenol, 4-(3-ethyl-2-methylhexan-2-yl)phenol (3E22NP) and 4-(2,3-dimethylheptan-2-yl)phenol synthesized for their determinations were first used as standard substances. The 13 isomers in the technical mixtures individually occurred at mass percent portion of more than 2%. The total mass percent portions in the mixtures from Tokyo Chemical Industry (TCI), Aldrich, and Fluka covered with 89 ± 2%, 75 ± 4% and 77 ± 2%, respectively. The abundance of 4-(3,6-dimethylheptan-3-yl)phenol in the three mixtures was the largest with 11.1 ± 2% to 9.9 ± 0.3%, while that of 4-(2-methyloctan-2-yl)phenol was the smallest with 2.9 ± 0.3% to 3.0 ± 0.2%. Additionally, structures of four new isomers of more than 1% portion present in a technical mixture were elucidated as two pairs of diastereomeric isomers: two types of 4-(3,4-dimethylheptan-4-yl)phenol (344NP) and those of 4-(3,4-dimethylheptan-3-yl)phenol (343NP). By estrogenic assay of 13 isomers with yeast estrogen screen system, the activity of 3E22NP was the highest, while that of 4-(3-methyloctan-3-yl)phenol was the least. Their relative activities to that of 3E22NP were individually calculated. Estrogenic equivalent concentrations of the three technical mixtures were predictively evaluated. The ratio of the EEC to the conventional concentration, total mass percent portions of the 13 isomers in technical mixtures were 0.208 for TCI, 0.206 for Aldrich and 0.205 for Fluka. The predicted estrogenic activity of measured concentration of para-NP in technical mixtures was approximately 5-fold greater than the measured estrogen agonist activity.     

电解质种类对电催化氧化降解苯酚的影响

研究了不同电解质对有机物电催化氧化性能的影响。以高温热解法制备了Ti/SnO2+Sb2O3阳极,用SEM和XRD对电极结构进行了表征。以苯酚为目标有机物,考察了Na2SO4、NaCl和NaNO33种不同电解质对苯酚降解效果的影响。用循环伏安法研究了苯酚在不同支持电解质条件下的电化学行为。采用碘量法测定了在不同电解质溶液中氧化性物质的生成量。研究结果表明,电极的活性涂层主要由SnO2和微量的Sb2O3组成,均匀完整地覆盖住了Ti基体表面。以NaCl为支持电解质时苯酚降解效果明显优于用Na2SO4、NaNO3为支持电解质,并且苯酚的降解主要以电极表面电化学生成的HClO和ClO-的间接化学氧化为主。以Na2SO4为支持电解质时有利于降低和稳定槽电压。在3种电解质条件下,苯酚的降解均遵循一级反应动力学规律。在降解过程中NaCl溶液中生成的氧化性物质浓度最大,且随降解时间延长逐渐增大。     

An assessment of the suitable operating conditions for the CeO2/gamma-Al2O3 catalyzed wet air oxidation of phenol

It has been shown that the CeO2/gamma-Al2O3 catalyst is a feasible alternative to CeO2 for the catalytic wet air oxidation (CWAO) of phenol because it remains an effective catalyst and yet is cheaper to prepare. In this study, we found that the optimal cerium content in the CeO2/gamma-Al2O3 catalyst was 20 wt.%, regardless of catalyst loading. Furthermore, at 180 degrees C, with a phenol concentration of 1000 mg l(-1), and an O2 partial pressure of 1.0M Pa or 1.5M Pa, the optimal catalyst loading was 3.0 gl (-1). The efficacy of CWAO of phenol improved with O2 partial pressure, although the effects of O2 pressure were more significant between 0.5 MPa and 1.5 MPa than between 1.5 MPa and 2.0 MPa. After 2 h of reaction, approximately 100% phenol conversion and 80% total organic carbon (TOC) removal was recorded at 180 degrees C, 1000 mg l(-1) of phenol and 3.0 g l(-1) of catalyst. Because these percentages subsequently leveled off, it is suggested that 2 h is a suitable time over which to run the reaction. The efficacy of CWAO of phenol decreased as initial phenol concentration was raised (from 400 to 2500 mg l(-1)), with the exception of phenol conversion after about 2 h, for which 400 mg l(-1) produced the lowest phenol conversion figure. Higher phenol concentrations require both catalyst loading and O2 partial pressure to be increased to maintain high performance. For example, for 2000 mg l(-1) and 2500 mg l(-1) phenol, nearly 100% phenol conversion and 90% TOC removal after 4 h of reaction at 180 degrees C required 4.0 g l(-1) of catalyst and 2.0 MPa.     

木棉基活性炭纤维吸附性能的研究

采用浸渍(NH₄)₂HPO₄化学活化法650℃时制备得到3种新型木棉基活性炭纤维,即只浸渍不预氧化方法处理的AK1(activated kapok),先浸渍后预氧化的AK-2和先预氧化后浸渍的AK-3。利用制备得到的活性炭纤维处理苯酚和亚甲基蓝的模拟废水,AK-2具有苯酚最大吸附量(137.00 mg/g),AK-1具有亚甲基蓝最大吸附量(274.11 mg/g)。吸附苯酚时,在静态平衡实验中,更符合Freundlich吸附等温线;在动力学实验中,更符合准一级反应。吸附亚甲基蓝时,在静态平衡实验中,AK-1更符合Langmuir模型,AK-2 、AK-3更符合Freundlich吸附等温线;在动力学实验中,更符合准二级反应。     

Effect of the carbon coating in Fe-C-TiO(2) photocatalyst on phenol decomposition under UV irradiation via photo-Fenton process

Fe-C-TiO(2) photocatalysts which contained the residue carbon (0.2-3.3 mass%) were prepared from a mixture of TiO(2) and FeC(2)O(4) through the heating at 673-1173 K in Ar. These photocatalysts did not show a high adsorption of phenol, but they were active in photo-Fenton reactions during decomposition of phenol under UV irradiation with addition of H(2)O(2). It was proved that Fe(2+) governed the photoactivity of Fe-C-TiO(2) photocatalysts, it decreased with heat-treatment temperature above 773 K. For comparison, Fe-TiO(2) photocatalyst was prepared by heating TiO(2) and FeC(2)O(4) at 823 K in air for 3h. Phenol decomposition was going much slower on Fe-TiO(2) photocatalyst in comparison with Fe-C-TiO(2), of which mechanism was different, on the former phenol was decomposed by the radical reaction, on the latter through a complex reaction with iron and intermediates of phenol decomposition. Therefore carbon-coating TiO(2) was found to be advantageous for mounting iron and its application for the phenol decomposition via photo-Fenton process.     

On-line solid-phase extraction and fluorescence detection of selected endocrine disrupting chemicals in water by high-performance liquid chromatography

A high-performance liquid chromatographic method was developed to analyse selected endocrine disrupting chemicals in water by using automated on-line solid-phase extraction with a fluorescence detector. The excitation and emission wavelengths of the fluorescence detector were 230 nm and 290 nm, respectively. The selected endocrine disrupting chemicals include hormone steroids such as estradiol (E2), estriol (E3), ethynylestradiol (EE2), and ethynylestradiol 3-methyl ether (MeEE2) as well as nonylphenols (NP), octylphenols (OP), POE(1-2) nonyl phenol (NPE) and bisphenol A (BP). Three types of on-line cartridges (C18, PLRP-s and PRP-1) were tested to pre-concentrate the endocrine disruptors in deionised water. It was found that the recoveries of these chemicals at 1 microg/L were close to 100% except for 4-octyl phenol and 4-n-nonyl phenol, which had recoveries of about 40% to 80%. The two polymer cartridges (PLRP-s and PRP-1) gave higher recoveries than the C18 cartridges. The addition of methanol at 5% to 10% in water significantly improved the recovery of 4-octyl phenol and 4-n-nonyl phenol. The addition of methanol also led to an improvement in the recovery with C18 cartridges. With the addition of methanol in water samples, these three types of cartridges gave similar recoveries for the chemicals. The detection limits of this method ranged from 20 ng/L to 50 ng/L. A river water sample spiked with these chemicals was analysed using the above method and we found no interference with the peaks of the selected endocrine disrupting chemicals. The recoveries for these chemicals were more than 92% except for 4-NP with a recovery of 61%. This relatively simple method is useful for laboratory studies on the environmental fate of these endocrine disrupting chemicals in water.     

Modification of carbon-coated TiO2 by iron to increase adsorptivity and photoactivity for phenol

Carbon-coated TiO(2) modified by iron, were prepared from TiO(2) of anatase structure and PET modified by FeC(2)O(4). Catalysts were prepared by mixing powders of TiO(2) and modified PET and heating at different temperatures, from 400 to 800 degrees C under flow of Ar gas. High adsorption of phenol was observed on the catalyst heated at 400 degrees C, confirmed by FT-IR analysis. On this catalyst, fast rate of phenol decomposition was achieved by addition of small amount of H(2)O(2) to the reaction mixture. Phenol decomposition proceeded mainly through the direct oxidation of phenol species adsorbed on the catalyst surface due to the photo-Fenton reaction. Iron-modified carbon-coated TiO(2) catalysts heated at 500-800 degrees C showed almost no phenol adsorption or oxidation.     

A combined photolytic-electrolytic system for the simultaneous recovery of copper and degradation of phenol or 4-chlorophenol in mixed solutions

The effects of the presence of copper on the photooxidation of phenol and 4-chlorophenol and of the presence of the phenols on the recovery of copper by electrodeposition are studied in three systems: a photolytic cell in the presence and absence of TiO2 as a catalyst or H2O2 as an oxidant; an electrolytic cell and a combined photolytic-electrolytic system. The optimum system for the simultaneous removal of copper and destruction of the phenols which overcomes the effects of copper-phenol reactions is a combined system with concentrator electrode technology incorporated into the electrolytic cell. This combined system achieves >99% removal of copper and destruction of phenol or 4-chlorophenol in an 8 h period.     

Separation, synthesis and estrogenic activity of 4-nonylphenols: two sets of new diastereomeric isomers in a commercial mixture

Two sets of new diastereomeric 4-nonylphenol (NP) isomers [4-(3,4-dimethylheptan-4-yl)phenol (344NP, NP-J, L) and 4-(3,4-dimethylheptan-3-yl)phenol (343NP, NP-K, P)] were separated from a commercial NP mixture. The mixture of these diastereomers was synthesized at the same time by a single Friedel-Crafts reaction of 3,4-dimethyl-4-heptanol and phenol, and the mixture was separated into individual NPs by HPLC equipped with Hypercarb column. For the first time, in this study the stereostructure-estrogenic activity relationship of NP diastereomers was investigated. The NP isomers (NP-L and NP-P) having the beta-methyl group over the benzene ring were found to be 2-4 times more estrogenic than their diastereomers (NP-J and NP-K). In the case of the other set of diastereomer [4-(3,5-dimethylheptan-3-yl)phenol, (353NP, NP-E, G)] containing gamma-methyl group in the molecule, the gamma-methyl proton signal (delta 0.49) in the more estrogenic isomer (NP-G) also appeared in a higher field than the corresponding methyl signal (delta 0.76) of the less estrogenic isomer (NP-E).     

Kinetics of phenol and chlorophenol utilization by Acinetobacter species

Although microbial transformations via cometabolism have been widely observed, the few available kinetic models of cometabolism have not adequately addressed the case of inhibition from both the growth and nongrowth substrates. The present study investigated the degradation kinetics of self-inhibitory growth (phenol) and nongrowth (4-chlorophenol, 4-CP) substrates, present individually and in combination. Specifically, batch experiments were performed using an Acinetobacter isolate growing on phenol alone and with 4-CP present. In addition, batch experiments were also performed to evaluate the transformation of 4-CP by resting, phenol-induced Acinetobacter cultures. The Haldane kinetic model adequately predicted the biodegradation of phenol alone, although a slight discrepancy was noted in cases of higher initial phenol concentrations. Similarly, a Haldane model for substrate utilization was also able to describe the trends in 4-CP transformation by the resting cell cultures. The 4-CP transformation by the Acinetobacter species growing on phenol was modeled using a competitive kinetic model of cometabolism, which included growth and nongrowth substrate inhibition and cross-inhibition terms. Excellent agreement was obtained between the model predictions using experimentally estimated parameter values and the experimental data for the synchronous disappearance of phenol and 4-CP.     

高酚焦化废水萃取脱酚预处理

为了降低高酚焦化废水中挥发酚的浓度，实验研究了磷酸三丁酯煤油溶液在不同条件下对高酚焦化废水进行萃取脱酚预处理的效果。结果表明，萃取时间为8min，磷酸三丁酯煤油浓度为30％，温度低于40％，pH低于8．0，萃取比（油／水）R=1：2时，经过萃取后分水挥发酚浓度由4165mg降低到127．62mg／L，去除率高达96．94％，为后续生化处理奠定了基础。而萃取剂经过氢氧化钠溶液反萃取再生后，萃取剂的回收利用率可达94．25％以上。     

固体超强酸SO4^2-／TiO2-SnO2／Ce^4＋光催化降解含酚废水

采用共沉淀-浸渍法制备了固体超强酸SO4^2-／TiO2-SnO2／Ce^4＋,并用XRD、SEM等方法对其结构进行了表征。以苯酚的光催化降解为反应模型,确定了最佳的工艺条件和催化剂再生方法。结果表明：在pH值为6,苯酚初始浓度为50mg／L,催化剂投加量4g／L,光照距离12cm,光照时间为150min,降解率达67．73％,添加助催化剂H2O2后,反应60min,苯酚降解率达到86．33％,催化剂的最佳再生方法是先用1mol／L的硫酸浸渍24h后,在450℃下焙烧6h。     

Aromatic photonitration in homogeneous and heterogeneous aqueous systems

This work describes the nitration of aromatics upon near-UV photolysis of nitrate and nitrite in aqueous solution and upon photocatalytic oxidation of nitrite in TiO2 suspensions. Phenol is used in this work as a model aromatic molecule and as a probe for *NO2/N2O4. The photoinduced nitration of phenol in aqueous systems occurs upon the reaction between phenol and *NO2 or N2O4, and is enhanced by the photocatalytic oxidation of nitrite to *NO2 by TiO2. Aromatic photonitration in the liquid phase can play a relevant role in the formation of nitroaromatics in natural waters and atmospheric hydrometeors, thus being a potential pathway for the condensed-phase nitration of aromatics. Furthermore, the photoinduced oxidation of nitrite to nitrogen dioxide suggests a completely new role for nitrite in natural waters and atmospheric aerosols.     

Adsorption of phenols by papermill sludges

In this paper we studied the sorption capacity of paper mill sludges for phenols. Phenol, 2-chlorophenol (2-CP), 3-chlorophenol 3-CP). 4-chlorophenol (4-CP), 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), 2.4-dichlorophenol (2,4-DCP), 3,4-dichlorophenol (3,4-DCP) 3,5-dichlorophenol (3,5-DCP) and 2,4,5-trichlorophenol (2,4,5-TCP) were chosen for the sorption tests. Kinetic experiments showed that substituted-phenol sorption on papermill sludge was rapid (equilibrium was reached after 3 h); conversely, the time taken by the phenol to reach equilibrium conditions was 260 h. Experimental data showed that particle diffusion was involved in the sorption process but was not the only rate-limiting mechanism; several other mechanisms were involved. The adsorption isotherms showed the following order of retention capacity of papermill sludge: 2-NP = 4-NP < < 2-CP < phenol < 4-CP < or = 3-CP < 2,4 DCP<3,4 DCP=2,4,5 TCP<3,5 DCP. In all cases the experimental data showed a good fit with the Hill equation. which is mathemratically equivalent to the Langmuir-Freundlich model obtained by assuming that the surface is homogeneous, and that the adsorption is a cooperative process influenced by adsorbate-adsorbate interactions.     

Effect of operational factors on bioregeneration of binary phenol and 4-chlorophenol-loaded granular activated carbon using PVA-immobilized biomass cryogels

The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.     

Electrochemical and FTIR studies of the mutual influence of lead(II) or iron(III) and phenol on their adsorption from aqueous acid solution by modified activated carbons

Cyclic voltammetry and spectral FTIR studies of the influence of activated carbon surface modification on the co-adsorption of metal cation (lead or iron) and phenol from aqueous acidic solution were carried out. The diversity in surface chemical structure was achieved by applying different procedures of inorganic matter removal and by modifying the carbon samples in various ways: heating under vacuum, aminoxidation in an ammonia-oxygen atmosphere, oxidation with concentrated nitric acid. The quantities of adsorbed metal ions (Pb(2+) or Fe(3+)) and phenol from solutions containing cation or phenol separately or in a mixture were determined. The adsorption capacity from acidic aqueous acidic solution depends on the chemical properties of the activated carbon surface (e.g., decrease in phenol adsorption with relative lower basicity of the adsorbent). The electrochemical parameters of electrodes made from the carbon samples were estimated, and some possible electrochemical reactions were determined from voltammograms recorded in acid electrolyte solution containing adsorbed species (separately or as a mixture). Relationships were found between metal ion adsorption and electrochemical behavior of Pb(2+)/Pb(4+) and Fe(3+)/Fe(2+) couples on the one hand, and the presence of phenol in the solutions tested and the influence of surface chemistry of the carbon electrodes on electrochemical processes on the other. The changes in adsorption capacity with respect to the adsorbates used and the changes in FTIR spectra of the carbons as a result of adsorption and/or coupling phenol molecules are discussed.     

Characterization of microbial consortia that reductively dechlorinate 4-chlorophenol and transform phenol to benzoate enriched from estuarine sediment of Lake Shinji

Monochlorophenols were degraded to benzoate via phenol by the initial dechlorination and the subsequent conversion of phenol to benzoate in anaerobic sediment samples of estuarine Lake Shinji under methanogenic conditions. To characterize bacteria that dechlorinate 4-chlorophenol and transform phenol to benzoate, we analyzed the microbial community structure of the enrichment culture with each 4-chlorophenol and phenol by the limiting dilution method with polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) of 16S rRNA gene. After serial dilution of the culture, the 4-chlorophenol-dechlorinating culture consisted of two dominant bacteria, one of which was most homologous with Dehalobacter sp. In the enriched culture with phenol, minor band homologous with Cryptanaerobacter phenolicass corresponded to the transformation activity.     

Henry's law constants of phenol and mononitrophenols in water and aqueous sulfuric acid

Phenols are widely present in the atmosphere and nitration probably in the aerosol phase leads to nitrophenols. Nitration by nitric acid in sulfuric acid can be rapid, but little is known of the process under atmospheric conditions. The Henry's law constants K(H)(dagger) of phenol and 2-, 3- and 4-nitrophenol were all measured by a bubble stripping method as: 2820mol kg(-1) atm(-1) (at 298K), 147mol kg(-1) atm(-1) (at 298K), 1.6x10(4)mol kg(-1)atm(-1) (at 308K) and 2.1x10(4)mol kg(-1) atm(-1) (at 308K), respectively. The Henry's law constant of phenol in sulfuric acid systems is lower by more than a factor of two at 1020mol kg(-1) atm(-1) (at 298K) in 40wt% sulfuric acid, which is in line with salting-out of oxygen-containing aromatic compounds in water-sulfuric acid systems. The Henry's law constants of 2- and 4-nitrophenol behave differently and are almost independent of sulfuric acid concentration. The variation of K(H)(dagger) with temperature (T) described in terms of -dln(K(H)(dagger))/d(1/T) does not to vary with sulfuric acid concentration, suggesting enthalpy of dissolution for phenol is independent of sulfuric acid. The series of Henry's law constants measured here can describe the equilibrium situation for phenols in careful determinations of phase partitioning in the atmosphere.     

Irrigation of soil with synthetic landfill leachate--speciation and distribution of selected pollutants

The fates and toxicities of selected landfill leachate pollutants in a soil with a low attenuation potential were investigated. Soil columns consisting of a loamy sand which had been irrigated with synthetic landfill leachates were dissected and analysed for pH, electrical conductivity, copper and zinc species, iron and phenol concentrations and microbial activity. Copper was found to be least mobile and accumulated in the top 4 cm of the soil columns. Sequential extraction of the soil revealed that at least two-thirds of the total copper was in the EDTA-, NaOH-extractable and residual fractions. Approximately 2% of the copper was water soluble and between 1 and 22% was in the MgCl(2)-extractable fraction. Zinc and phenol were relatively mobile and were detected throughout the soil-column profile as well as in the column effluents. The greatest zinc fraction (55-71%) was MgCl(2)-extractable. Zinc solubility in water was again low (1-4%). Phenol was partially adsorbed by the soil but its main attenuation occurred by biodegradation. Microbial activity was affected by the availability of the carbon source as well as the presence of copper and zinc. Copper was more inhibitory to microbial activity than zinc. In the presence of phenol, the simultaneous application of zinc and copper distinctly reduced microbial activity. No inhibitory effect of copper and zinc was observed in the absence of phenol when the microorganisms were severely carbon limited.