Sources and remediation for mercury contamination in aquatic systems--a literature review

Sources of mercury contamination in aquatic systems were studied in a comprehensive literature review. The results show that the most important anthropogenic sources of mercury pollution in aquatic systems are: (1) atmospheric deposition, (2) erosion, (3) urban discharges, (4) agricultural materials, (5) mining, and (6) combustion and industrial discharges. Capping and dredging are two possible remedial approaches to mercury contamination in aquatic systems, and natural attenuation is a passive decontamination alternative. Capping seems to be an economical and effective remedial approach to mercury-contaminated aquatic systems. Dredging is an expensive remedial approach. However, for heavily polluted systems, dredging may be more effective. Natural attenuation, involving little or no cost, is a possible and very economical choice for less contaminated sites. Proper risk assessment is necessary to evaluate the effectiveness of remedial and passive decontamination methods as well as their potential adverse environmental effects. Modeling tools have a bright future in the remediation and passive decontamination of mercury contamination in aquatic systems. Existing mercury transport and transformation models were reviewed and compared.     

柔性电路板清洁生产措施浅述

通过对柔性线路板生产工艺、过程控制、能耗控制、污染防治技术等方面措施的论述，为柔性线路板项目实现，清洁生产提供帮助。     

西子生态农场的综合开发利用研究

介绍了西子生态农场建设的情况。农场采用德国引进的固液分离技术处理畜禽粪便,制取沼气,沼气发电用于整个农场。沼液,沼渣得到综合利用、整个农场实现污水循环使用,取得了良好的经济效益。,社会效益和生态效益,具有推广价值。     

生物焦炭滴滤塔降解苯乙烯废气的中试启动研究

苯乙烯废气既是一种挥发性有机化合物(VOCs),又属于我国恶臭气体控制的范围之内。其作为一种化工原料和有机溶剂广泛应用于工业生产中。生物法处理有机废气具有运行费用低和没有二次污染等优点。采用焦炭填料滴滤塔对苯乙烯废气的处理进行了中试启动研究。启动过程中,进气浓度范围是50~114 mg/m3,去除率为30%~45%左右,最高可达90%左右。所采用的焦炭填料可以认为是一种环境友好型填料,废弃后可作为燃料,值得推广。     

Decomposition of paper wastes in presence of ceramics and cement raw material

Paper recycling is an environmental important activity that is carried out in all the countries, but during the recycling process a paper waste is produced. Generally these wastes are placed in landfill sites but it is possible to profit it as secondary fuel and raw material in manufacture furnaces.

In this work the combustion of the waste papers with cement and ceramic raw material has been studied with the objective to analyse the interaction of these substances with the emitted pollutants like PAHs and PCDD/Fs.

The results of the study show that the presence of inorganic material produces an increment in the lighter PAH emission but chlorinated compounds are not affected. The PCDD/F emission level found in the combustion of this waste is quite low compared with other wastes subjected to similar conditions.     

Environmental fate of glyphosate and aminomethylphosphonic acid in surface waters and soil of agricultural basins

Argentinian agricultural production is fundamentally based on a technological package that combines no-till and glyphosate in the cultivation of transgenic crops. Transgenic crops (soybean, maize and cotton) occupy 23 million hectares. This means that glyphosate is the most employed herbicide in the country, where 180–200 million liters are applied every year.     

NitroGenius: a nitrogen decision support system. A game to develop the optimal policy to solve the Dutch nitrogen pollution problem

A nitrogen decision support system in the form of a game (NitroGenius) was developed for the Second International Nitrogen Conference. The aims were to: i) improve understanding among scientists and policy makers about the complexity of nitrogen pollution problems in an area of intensive agricultural, industrial, and transportation activity (The Netherlands); and ii) search for optimal policy solutions to prevent pollution effects at lowest economic and social costs. NitroGenius includes a model of nitrogen flows at relevant spatial and temporal scales including emissions of ammonia and nitrogen oxides and contamination of surface- and groundwaters. NitroGenius also includes an economic model describing relationships for important sectors and impacts of different nitrogen control measures on Gross Domestic Product (GDP), unemployment, energy use, and environmental costs. About 50 teams played NitroGenius during the Second International Nitrogen Conference. The results show that careful planning and selection of abatement options can solve Dutch nitrogen problems at reasonable cost.     

南京城市污泥发酵苏云金杆菌培养基成分优化

研究南京江心州污水处理厂污泥作为原料发酵生产苏云金杆菌(Bacillus thringiensis)的可行性,并与常规的工业发酵黄豆粉培养基发酵B.thringiensis做比较,结果表明,以固形物含量3%的污泥为基质发酵B.thringiensis,其菌体数及芽孢数只有108个/mL,而工业发酵黄豆粉培养基发酵B.thringiensis菌体数及芽孢数为109个/mL。优化污泥发酵生产苏云金杆菌培养基成分,将污泥与不同量的黄豆粉复配作基质发酵B.thringiensis,结果发现,在污泥中添加15 g/L黄豆粉可基本满足工业发酵生产的需要,发酵72 h获得的B.thringiensis细胞总数及芽孢数均在109个/mL以上。以黄粉虫作试虫的生物毒性实验表明,复配后的基质与工业发酵黄豆粉培养基生产的B.thringiensis孢晶混合液的毒性相当。     

Agricultural work related injury and Ill-health and the economic cost

This paper contains a literature review of the occupational injuries and ill-health in agriculture world-wide and a survey of the attempts that have been made to estimate the resulting economic and social costs. Agricultural workers suffer a wide variety of disorders as a result of their occupation. These range from minor (cuts, bruises) to more severe (deep wounds, fractures), permanent (amputation, spinal cord injury) and fatal injury. Ill-health as a result of contact with animals, micro-organisms, plant material dusts or chemicals are associated with certain types of agriculture. There is an underlying but unquantified incidence of pain, stress and injury as a result of ergonomic problems due to poor working procedures and conditions. Statistics from many countries or regions show that agriculture consistently has one of the highest accident and injury rates of the industrial sectors. There are many causes for the work related injury and ill-health in agricultural workers. In developed countries, tractors and other machinery cause a significant proportion of the accidents and are a major cause of occupational deaths. In less developed countries, accidents due to hand tools such as hoes, sickles and cutting instruments are most prevalent. Animals are a significant cause of injury and ill-health in many countries. Debilitating allergic reactions in the respiratory tract or the skin are caused by exposures to organic dusts, or by contact with allergenic plants in the field respectively. Where comparative data are available, occupational pesticide poisoning in agriculture is a small proportion (< 1–4%) of the total work related disorders. Because of the wide variety of occupational risks to agricultural workers, it is emphasised that if one type of agricultural practice is replaced by another then the risks from the alternative procedure need to be considered. If, for example, agrochemical pest control practices are replaced by methods involving the increased use of machinery, draught animals or manual operations, then an assessment of the resulting risks should be taken into account. Some of the economic costs of occupational injury and ill-health in agriculture can be quantified directly, such as medical costs, the cost of rehabilitation and loss of earnings. Other costs are more difficult to estimate such as loss of opportunity and income foregone for permanent and fatal injury and for the effect on a victim’s family. The estimation of the overall economic costs to farming communities and national agriculture requires further development. When one agricultural practice is replaced wholly or partly by another, for example agrochemical pest control by alternative control methods, then it is necessary to take into account the occupational health costs of the alternative procedure for realistic comparative assessment. There are a number of issues which require continued or increased attention by the relevant national and international authorities and by the agricultural industry. These include the improved collection and collation of occupational health statistics, a better understanding of the extent of ergonomic problems in agriculture, more realistic assessments of the cost of occupational injury and ill-health and the continued need to reduce occupational health disorders by appropriate training and education in agricultural practices and the use of agricultural equipment.     

Comparative studies of water quality in two brackish ponds for shrimp cultivation in a salt marsh

Physical, chemical and microbiological characteristics of two 'keiwais' (brackish ponds built along the coastal area for shrimp cultivation) in the Mai Po Marshes, Hong Kong, were measured and compared. One keiwai, located closer to the domestic and agricultural areas, had lower shrimp production than the other. Physical, microbiological and most of the chemical parameters of two keiwais showed no significant difference, while the keiwai closer to the domestic and agricultural areas had higher biochemical oxygen demand (BOD5), and higher levels of phosphate (PO4(3-)-P) and cadmium (Cd2+). Results of the present study indicate that these keiwais were polluted by sewage discharged from nearby domestic, agricultural and industrial areas. The possibility that water received by the less polluted keiwai was purified by surrounding mangroves and sediments in the Mai Po Marshes is discussed.     

Investigation of microplastic pollution on paddy fields in Xiangtan City,Southern China

Microplastics (MPs) have become a hot issue of environmental pollution. However, insufficient evidence exists regarding the distributions and fates of MPs in terrestrial environment, especially in farmlands. The distributions of MPs in paddy fields were investigated in Xiangtan City, a typical rice production area in China. The abundance of MPs in paddy seedling raising fields was 3805?±?511 n·kg^?1, which increased by approximately 9 times than that in common paddy fields. Transparent films became the dominant forms due to the huge usage of mulching films, corresponding to that the proportion of polyvinyl chloride (PVC) increased to 17% there. Moreover, an industrial plant nearby also contributed considerably to the MP pollution; the proportion of PVC (33%) in the paddy fields nearby increased to approximately 4 times of common paddy fields, while polyvinyl alcohol (PVA; 13%) used as an important chemical raw material to synthesis in various applications was uniquely detected there. These results highlight the input of MPs from agricultural and industrial activities in farmlands. Their contributions to the MP pollution in farmlands should be continuously investigated.

     

Application of ultrasonic assisted extraction of chemically diverse organic compounds from soils and sediments

The objective of this research was the development, optimization, and demonstration of an ultrasonic assisted extraction (UAE) based method for organic anthropogenic waste indicators (AWIs) with a range of physicochemical properties from soil and sediment samples. The optimized method was designed to be cost effective compared to existing extraction methods, which may require large quantities of consumables, produce substantial volumes of organic waste, or require costly instrumentation or equipment. Reagent grade sand, soil collected from the native grassland in proximity to Eastern Washington University (EWU), and sediment samples collected from the Spokane river were used as sample matrices during method development. These matrices were fortified with eight AWIs of varying chemical properties that are representative of a variety of household, industrial, and agricultural sources. The recoveries of the AWIs spiked onto these matrices were determined in the extracts using gas chromatography/mass spectrometry (GC/MS). These values reflect the efficiency of the method for extraction of these analytes from representative environmental matrices. Recoveries ranged from 46.1% to 110% in the fortified soil and from 49.2% to 118.6% in the fortified sediment samples, which is comparable with existing methods for the study analytes. The optimized method was then used to quantify AWIs in a biosolid-amended soil. Indole and p-cresol were detected in the biosolid-amended soil.     

Assessment of emissions and removal of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) at start-up periods in a hazardous waste incinerator

A study was conducted to observe the changes in polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F) levels and congener profiles in the flue gas of a hazardous waste incinerator during two start-up periods. Flue gas samplings were performed simultaneously through Air Pollution Control Devices (APCDs) (including boiler outlet, electrostatic precipitator (ESP) outlet, wet scrubbers (WS) outlet, and activated carbon (AC) filter outlet) in different combustion temperatures during a planned cold (long) start-up and an unplanned warm (short) start-up. The results showed that PCDD/F concentrations could be elevated during the start-up periods up to levels 3–4 times higher than those observed in the normal operation. Especially lower combustion temperatures in the short start-ups may cause high PCDD/F concentrations in the raw flue gas. Assessment of combustion temperatures and Furans/Dioxins values indicated that surface-catalyzed de novo synthesis was the dominant pathway in the formation of PCDD/Fs in the combustion units. PCDD/F removal efficiencies of Air Pollution Control Devices suggested that formation by de novo synthesis existed in ESP also when in operation, leading to increase of gaseous phase PCDD/Fs in ESP. Particle-bound PCDD/Fs were removed mainly by ESP and WS, while gaseous phase PCDD/Fs were removed by WS, and more efficiently by AC filter.

Implications: This paper evaluates PCDD/F emissions and removal performances of APCDs (ESP, wet scrubbers, and activated carbon) during two start-up periods in an incinerator. The main implications are the following: (1) start-up periods increase PCDD/F emissions up to 2–3 times in the incinerator; (2) low combustion temperatures in start-ups cause high PCDD/F emissions in raw gas; (3) formation of PCDD/Fs by de novo synthesis occurs in ESP; (4) AC is efficient in removing gaseous PCDD/Fs, but may increase particle-bound ones; and (5) scrubbers remove both gaseous and particle-bound PCDD/Fs efficiently.     

Ashes from fluidized bed combustion of residual forest biomass: recycling to soil as a viable management option

Although bottom ash (BA) [or mixtures of bottom and fly ash (FA)] from clean biomass fuels is currently used as liming agent, additive for compost, and fertilizer on agricultural and forest soils in certain European countries, in several other countries most of the ashes are currently disposed in landfills. This is due to both a lack of a proper classification of the materials and of regulatory barriers.Chemical characterization including analysis of an array of potentially toxic elements (PTEs) proved that over 100,000 tons of BA currently landfilled every year in Portugal actually complied with legal limits for PTEs for soil fertilizers applied in other countries. Pot experiments were conducted, testing three dosages of BA and FA (1, 2.5, and 5%, in weight) in three mining soils with different properties. Additions of ash materials to soils led to an increase in the pore water pH relative to control pots (0% of ash added) and had a clear impact on DOC and on the solubilization of both macro- and micronutrients (notably Cu).The results from the case study using BA and FA from a Portuguese biomass thermal power plant demonstrate that it is imperative to further develop a regulatory framework to alleviate technological and environmental barriers for biomass ash utilization as raw material for fertilizers and/or soil liming agent, in accordance with the goals of the circular economy. A more harmonized view on how to assess the merits and risks of the re-use of these materials is also needed.     

Use and environmental implications of pulp-mill sludge as an organic fertilizer

Pulp-mill sludge is an industrial by-product with a high level of organic matter, which is eventually biodegradable. Since there are few alternatives for its practical use, its utilization as an agricultural fertilizer is proposed. An experiment was carried out during 2 years, with yellow lupin plants (Lupinus luteus L.), in order to define the critical application levels of this material. Biodegradability of the sludge in the soil was also evaluated, as well as its pollutant effects. Results obtained in the first year of the experiment showed that an application rate larger than 50 t ha(-1) of pulp-mill sludge, has a depressive effect on yield. Yet, this effect is completely dissipated in the second year. Finally, it is concluded that, if the use of this organic waste as an agricultural fertilizer is adequately monitored, soil pollution problems should not occur.     

Correlation between calcium carbonate content and emission characteristics of incense

In Taiwan and China, calcium carbonate is commonly added as a filler during incense production to lower the cost. This study has found an unexpected benefit for this practice: it reduces particulate emission. Nine types of the popular incense on the local market were chosen for this study. The calcium content in raw material incense was analyzed by inductively coupled plasma atomic emission spectrometry, followed by X-ray diffraction (XRD) spectroscopy. The correlation between the calcium content and emission characteristics of incense was investigated. The calcium content varied from 1.8 to 60 mg/g (incense burned) among those nine different types of incense. Very little calcium (< 1%) was found in natural wood or plants, which is mainly the raw material of incense. Instead, most calcium was artificially added in the form of CaCO3 during manufacturing. The combustion characteristics, including burning rate, emission factors of particulate, ash, and solid-phase polycyclic aromatic hydrocarbons (S-PAHs), varied significantly among the nine types of incense. Incense containing 2% calcium would emit 30% less S-PAHs, compared with those with little (< 0.2%) calcium. More importantly, increasing the calcium content from 0.5 to 5% by adding CaCO3 reduced the particulate emission from incense by approximately 50%.     

Reuse of hydroponic waste solution

Attaining sustainable agriculture is a key goal in many parts of the world. The increased environmental awareness and the ongoing attempts to execute agricultural practices that are economically feasible and environmentally safe promote the use of hydroponic cultivation. Hydroponics is a technology for growing plants in nutrient solutions with or without the use of artificial medium to provide mechanical support. Major problems for hydroponic cultivation are higher operational cost and the causing of pollution due to discharge of waste nutrient solution. The nutrient effluent released into the environment can have negative impacts on the surrounding ecosystems as well as the potential to contaminate the groundwater utilized by humans for drinking purposes. The reuse of non-recycled, nutrient-rich hydroponic waste solution for growing plants in greenhouses is the possible way to control environmental pollution. Many researchers have successfully grown several plant species in hydroponic waste solution with high yield. Hence, this review addresses the problems associated with the release of hydroponic waste solution into the environment and possible reuse of hydroponic waste solution as an alternative resource for agriculture development and to control environmental pollution.     

Problems of Meeting Multiple Air Quality Objectives for Coal-Fired Utility Boilers

Gaseous wastes and particulate emissions are produced in the process of burning coal to produce electrical energy. In attempting to control these gaseous wastes, changes in the operation efficiency of boilers and secondary equipment are likely to result, and in addition liquid and solid waste streams are produced. The interrelationships among the various forms of wastes and the effects of air quality control on process efficiency are often overlooked in studies of environmental quality management.

The study was undertaken to evaluate the technical alternatives for handling gaseous and particulate emissions from coal-fired boilers and to determine the feasibility of meeting several standards simultaneously. The gaseous emissions of major importance in the combustion of coal are parti culates, oxides of sulfur, and oxides of nitrogen. Particulates can be controlled by a tradeoff among further preparation at the mine (for additional ash removal), type of boiler, use of dust control equipment and high stacks for dispersion of residual emissions, if ambient air standards are considered. Oxides of sulfur reduction depends currently on fuel substitution, limestone additives in the boiler and some form of contact process such as wet scrubbing, or the use of high stacks. Oxides of nitrogen control in coal fired boilers is restricted to small reductions by either changes in boiler operation, such as lower excess air levels, adsorption during wet scrubbing or by dispersion from high stacks.     

农业废弃物的资源化利用

我国的农业资源浪费和破坏现象十分严重,解决这一问题的根本途径是开展农业废弃物的资源化利用,它是农业可持续发展的重要方面。本文在分析了农业废弃物资源化利用的理论基础后,讨论了农业废弃物的主要资源化利用途径和支持与保障体系。     

Atmospheric mercury emissions from waste combustions measured by continuous monitoring devices

Atmospheric mercury emissions have attracted great attention owing to adverse impact of mercury on human health and the ecosystem. Although waste combustion is one of major anthropogenic sources, estimated emission might have large uncertainty due to great heterogeneity of wastes. This study investigated atmospheric emissions of speciated mercury from the combustions of municipal solid wastes (MSW), sewage treatment sludge (STS), STS with waste plastics, industrial waste mixtures (IWM), waste plastics from construction demolition, and woody wastes using continuous monitoring devices. Reactive gaseous mercury was the major form at the inlet side of air pollution control devices in all combustion cases. Its concentration was 2.0-70.6 times larger than elemental mercury concentration. In particular, MSW, STS, and IWM combustions emitted higher concentration of reactive gaseous mercury. Concentrations of both gaseous mercury species varied greatly for all waste combustions excluding woody waste. Variation coefficients of measured data were nearly equal to or more than 1.0. Emission factors of gaseous elemental mercury, reactive gaseous mercury, and total mercury were calculated using continuous monitoring data. Total mercury emission factors are 0.30 g-Hg/Mg for MSW combustion, 0.21 g-Hg/Mg for STS combustion, 0.077 g-Hg/Mg for STS with waste plastics, 0.724 g-Hg/Mg for industrial waste mixtures, 0.028 g-Hg/Mg for waste plastic combustion, and 0.0026 g-Hg/Mg for woody waste combustion. All emission factors evaluated in this study were comparable or lower than other reported data. Emission inventory using old emission factors likely causes an overestimation.